Windows can not manage to have different DPI 1080p and 4K monitor

Windows can not manage to have different DPI 1080p and 4K screen. However, it is impossible not to have a magnification of 1080p but 25-35% on Dell 4K (P2715Q) intimidate. Windows 8.1 increases on both screens. I have clicked out that it will not change
on both screens, and only on 4K Dell P2715Q.
I have Nvidia GTX 680 and latest drivers 347.88! Windows is 8.1 Pro with Mediacenter.

Hi,
Agree with you, quote from “Windows 8.1 DPI Scaling Enhancements” Windows blog.
“here have been some questions about when per-display DPI scaling is used (different DPI scaling values per display) and I wanted to add a note here to clarify. On Windows 8.1 when you have the “Let me choose one scaling level for all
my displays” check box checked (not checked by default) one uniform DPI scaling value is used for all displays.”
http://blogs.windows.com/bloggingwindows/2013/07/15/windows-8-1-dpi-scaling-enhancements/
Regards,
D. Wu
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

  • TS3276 Most attachments from a specific address (work) can not be opened, identified as winmail.data and no data available. Not sure if this is based on the e-mail coming from a windows based system, too old of a windows based system or simply how i have

    Most attachments from a specific address (work) can not be opened, identified as winmail.data and no data available. Not sure if this is based on the e-mail coming from a windows based system, too old of a windows based system or simply how i have it set on my Mac.

    Brightbleu wrote:
    Most attachments from a specific address (work) can not be opened, identified as winmail.data and no data available. Not sure if this is based on the e-mail coming from a windows based system, too old of a windows based system or simply how i have it set on my Mac.
    Winmail.data are not usable files. They just preserve RTF within the message.
    http://support.microsoft.com/kb/278061
    Cheers
    Pete

  • HT5628 i was installing windows 8 on mac by boot camp and after i put the windows code and choose the partition i formatted the boot camp sector it said windows can not install on this sector because it is gpt

    i was installing windows 8 on mac by boot camp and after i put the windows code and choose the partition i formatted the boot camp sector it said windows can not install on this sector because it is gpt

    Reinstalling Mavericks depends on several factors:
    if you erased your recovery partition
    what OS originally came on your Mac.
    I'll assume you don't have a backup available that you made before your mishap,  because you didn't mention it.
    That's really the take home message here: have a backup!
    If you still have your recovery partition:
    boot into the recovery partition (command R at restart)
    use the recovery partition to reinstall Mavericks. see: OS X: About OS X Recovery
    if you do not still have your recovery partition, then it depends on whether your Mac originally came with installer disks or not.
    If it originally came with installer disks, you would boot from the installer disks, erase your HD, and then reinstall the OS that is on the installer disks, and then upgrade as necessary until you get to Mavericks.
    If your mac did not originally come with installer disks, but you managed to erase your recovery partition, then you can try to boot into internet recovery (option-command-R at restart), and use internet recovery to erase your HD and reinstall the OS that originally came with your computer, and then upgrade to Mavericks if you need to. See: Hands on with Mountain Lion's OS X Recovery and Internet Recovery | Macworld
             (the reference refers to ML but it applies just as well to Mavericks).

  • Touchsmart IQ524 hard drive crashed. Ran Recovery CDs and I get an error Windows can not install on

    I have an HP Touchsmart IQ524 which the hard drive crashed.  I replaced the hard drive with the exact same model.  I run the Recovery CDs (which I purchased from HP website) and it goes all the way through the process and after the reboot I get a message that "Windows can not install software on this hardware" - so it never completes the process.  I have formatted the hard drive and bought and returned 3 hard drives.  Any suggestions and assistance will be greatly appreciated.

    Hi:
    I love recovery disks when they work, and HATE them when they don't.
    Fortunately, I have a workaround for you which isn't as good as a recovery disk, but it is better than pulling your hair out, and getting nowhere.
    First of all, before you try this, did you perform the recovery with only the keyboard and mouse connected?
    Did you buy the same size or larger hard drive?
    If your answer to either question is no, then that may be the problem.
    Now to the workaround...
    If you're up to a slight but rewarding challenge you can make your own if you can read your 25 character Vista product key on the PC.
    Just download the 3 files you need at the link below, and read all of the instructions to create a bootable DVD installation disk using imageburn.
    Disregard the part of the text under the first screen shot about "extract the files to the Vista folder."
    The files were already extracted to that folder when you ran the X14.exe file by reading the text on top of the first screen shot.
    The other thing I noticed is on the 4th screen shot, where it shows Developer ID Microsoft Corporation. I had to type Microsoft Corporation in myself, and then the other codes automatically populated.
    When I went to compile the ISO file, ImageBurn gave a message that about a WIM file and ISO, and if I wanted to burn it in a different format.
    I selected No, make the ISO file.
    It was not that hard to do. I burned both the 64 bit disk and the 32 bit disk in case I ever need them.
    I tested both of them on my hp dc7100 CMT desktop PC, they worked perfectly.
    When you enter the product key, it knows what version of Vista you have.
    http://en.community.dell.com/support-forums/software-os/w/microsoft_os/3317.2-3-microsoft-windows-v....
    After you successfully install Vista, you can then install the drivers from your PC's support and driver page.
    Paul

  • Do you need to use an email as an apple ID?    We have a family email which is currently the apple ID so I can keep track of purchases but i have 2 iPhones and 2 itouches. Can all 4 devices have different apple ID under the same email address. Also for th

    Do you need to use an email as an apple ID?    We have a family email which is currently the apple ID so I can keep track of purchases but i have 2 iPhones and 2 itouches. Can all 4 devices have different apple ID under the same email address. Also I wanted to know because for the game center we wanted to keep track of each individual not just o e account.  DID I MAKE SENSE

    Figured it out. Thanks.

  • Windows 7-8.1 Can not change the MAC Address on wifi and cannot load login page in public HotSpot.

    Windows 7-8.1 Can not change the MAC Address on wifi and cannot load login page in public HotSpot.
    Adapter: Ralink RT3070 Chipset wifi adapter
    Tested: os Windows 8.1 Professional
    Hot Spot: 802.11b
    The first problem windows 7-8.1 got IP adress and connect he public HotSpot  but  cannot load login page or any other page. It does not work with it.
    The second problem Wifi canrd/configure/Advandes (No network adress change function).Tested with the default windows driver and the ralink rt 3070 driver the same problem.On windows XP the same function the same driver works perfectly.
    multiple users to have expressed interest in the problem But Microsoft not corrected the problem window7-8.1 10?
    lizardsystems.com/wiki/change_mac_address/faq/change_mac_address_in_windows_7
    blog.technitium.com/2011/05/tmac-issue-with-wireless-network.html
    superuser.com/questions/519189/how-to-change-the-mac-address-in-win-8-to-spoof-a-roku-player-through-a-wifi-spl
    social.technet.microsoft.com/Forums/windows/en-US/59e07df3-471c-499e-ad5f-e7cb507595df/cannot-change-mac-address-in-windows-7-driver-has-option-doesnt-work-neither-does-regedit-ms?forum=w7itpronetworking
    networksteve.com/windows/topic.php/CANNOT_CHANGE_WIRELESS_%28SPOOF%29_MAC_ADDRESS_ON_WINDOWS_7/?TopicId=16810&Posts=1
    On windows XP or linux have a MAC adress Change function  allow 00 mac adress and another normal mac adress range.On windows 8.1 all Mac changer program dont work.This 2,6,A,E on second adress are not vaild Mac adress. You simply can not use normal MAC
    addresses on windows 8.1.When i connect the usb the Pc windows 8.1 recognizes the adapter but the default  driver and the downloaded ralink driver the same problem.On windows xp the current driver works perfectly have (Local Mac Network Adress) funktion
    and works with the 802.11b hot spot.I got the internet my PC and laptop too public HotSpots and another wifi HotSpots if wont work correctly i can not use neither the windows 7,8,8.1 or 10. Many users have expressed interest in the problem more forums.
    The 3. problem im tested in virtualbox the windows 7 and 8.1 on 8.1 (on the blue wifi platform) not show correctly the signal strengh. On windows 7 show this correctly.The windows 7-8.1 Configure/advanced the advanced options on Ralink 3070 the default (windows
    driver) somehow downgraded function is less than for Xp. Configure/advanced the advanced options (needs to be upgraded in the future) because it does not advance but rather regressed.
    Today it is very common these wi-fi technology increasingly used (hotels,Public Hots Spots,Internet coffe,) growing free bublic wifi projects. The wifi funktions on windows  need debugging and modernize.The quality of Wi-Fi is now the operating system
    is now a thing order which is not good then the operating system is unusable.

    Hi,
    For changing the MAC address for Windows 7 is designed with some limitation, we cannot get over it. Thanks for your understanding.
    Under Windows 7, the possible range of spoofed addresses for wireless adapters that can be set is limited.  To be used by Windows 7, a spoofed MAC address should have 0 as a least significant bit (unicast) and 1 as a second least significant
    bit (locally administered) in the second nibble.  Thus possible values for the second nibble are limited to 2, 6, A and E.
    In other words 
    MAC address:  “XY-XX-XX-XX-XX-XX” “X” can be anything hexadecimal.  The hexadecimal “Y”, written in binary format, is  Y:  “kmnp”,  where “p” is the least significant bit; 
    p=0 --> unicast;
    p=1 --> multicast;
    n=0 --> globally assigned MAC;
    n=1 --> locally administered;
    So, actually MAC can be changed  to any combination in which p=0 and n=1;
    “Y” can be 2, 6, A or E.
    So the possible MAC addresses in Windows 7 for wireless adapters:
    X2-XX-XX-XX-XX-XX
    X6-XX-XX-XX-XX-XX
    XA-XX-XX-XX-XX-XX
    XE-XX-XX-XX-XX-XX
    For the wifi hotspot issue, please check this blog to see if it can be helpful.
    Windows 7 Connectivity Problems in Public Hotspots
    http://blogs.technet.com/b/patrickr/archive/2010/07/28/windows-7-connectivity-problems-in-public-hotspots.aspx
    Kate Li
    TechNet Community Support

  • HP Pavilion dv7 6b57nr windows can not continue

    after system recovery with hp recovery disc windows will not load completely   After setup for first use the wecome screen loads to the point of says welcome  then windows can not continute comes on.   
    HP Pavilion dv7 6b57nr windows 7

    You can get some of the original software & drivers from your Support page HERE
    If the copy of Windows you have is already activated on another machine you may need to install the version that matches your license key attached to bottom of laptop. 
    If you can read the 25 character Microsoft Windows 7 license key attached to your laptop ,download a Windows 7 ISO file to burn to a DVD for the version that is listed on the Microsoft COA sticker. 
    Link to the W7 ISO file downloads:
    http://www.mydigitallife.info/official-windows-7-sp1-iso-from-digital-river/
    Get ImgBurn to burn the iso image to cd
    Or use the Windows 7 USB/DVD installation tool to convert the ISO file to a Windows installation on DVD or USB flash drive.
    http://www.microsoftstore.com/store/msstore/html/pbPage.Help_Win7_usbdvd_dwnTool
    Use the 25 character product key on the PC to activate the installation.
    Next go to your support and driver page to install the drivers you need.
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • Windows can not adjust the brightness on this display

    I have a Toshiba Satellite LX835-D3300 ( Serial #ZC119804Q )
    I want to brighten my display, but it tells me..... Windows can not adjust the brightness on this display.
    In my HELP section on my computer it tells me to...
    Tap or click PC and devices, then tap or click Display
    Make sure the Adjust my screen brightness automatically slider is turned on
    Get the best display on your monitor - Microsoft Windows Help
    (If you don't want the screen brightness to change automatically, tap or click the Adjust my screen brightness automatically slider to turn it off.)
    Tap or click Apply.
    I do not have that.
    I notice that if I go to the side of my screen and then click on Devices, click on projects... "Second Screen" is showning
    I clicked on it and then I went and clicked on PC screen only and it is highlighted, but when I go back to it, it stills shows "Second Sreen"
    Please help me. What am I doing wrong 

    All-in-One LX835-D3300
    Downloads here.
    Have you upgraded to Windows 8.1? If so, did you follow these instructions?
       How to Update from Windows 8 to Windows 8.1
    -Jerry

  • Windows can not find ' FILE ': error.

    I have downloaded and installed the production version of SQL Developer. (1.0.0.14.67)
    Windows XP SP 2.
    When I started it for the first time I checked all the file association check boxes.
    If I double click on a .sql file the following windows error occurs:
    Windows can not find '<file>'. Make sure you typed the name correctly, and then try again. To Search for a file, click the Start button, and then click search.
    SQL Developer does startup. The error message is closed when the OK button is selected.
    Any Ideas?
    Regards;
    Robert

    Hi Robert,
    Just to confirm, SQL Developer does actually open the file. The only issue is the error message displayed. I have logged a bug for that.
    There is a work around until that is sorted. If you use explorer to associate the file types with SQL Developer, they open without this error.
    Regards
    Sue

  • Window can not find a system image on this computer

    I have HPPavilion dv6 3134se notebook.when I purchased.its operating system was windows 7 home basic.My friend suggest me to upgrade windows 7 ultimate.he also give dvd of windows 7.i have installed it.after3days a message appear from microsoft.that your copy is not original.ITry to get my previous windows 7 home basic.when i press F 11&amp;force to recovery amessage apear tahat window can not find a system image on this computer.I try to my level find it a message appear.thatspecify the location of the system image.How search system image on the network pleasehelp me with url address&amp;my hp recovery partion also now not loki ngcomputer.i hope some one help me.
    This question was solved.
    View Solution.

    Hi,
    You're welcome, glad it helped
    All the best,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Firefox will not open give error can Windows can not find file firefox.exe

    when I try to open the install program for firefox I get error Windows can not file Programs\MozillaFirefox\firefox.exe
    tried to installing update to correct this no luck

    Sounds quite weird that you can't open profile manager or launch the official Mozilla installer. Probably try to reboot, and to scan for malware?
    Malware Removal Links: http://www.safer-networking.org , http://www.malwarebytes.org , http://www.spywareterminator.com , http://www.microsoft.com/security/malwareremove/default.aspx
    If you can, please give more information about what was happening at the moment of the crash. Did the crash reporter start, and can you [https://support.mozilla.com/en-US/kb/Firefox+crashes+when+you+open+it#Getting_your_crash_report retrieve] your crash ID?

  • HT1386 Can i sync multipler iOS devices like iPad, iPhones on the same iTunes? Can each iOS device have different contents which are subsets of the iTunes complete library

    Can i sync multipler iOS devices like iPad, iPhones on the same iTunes? Can each iOS device have different contents which are subsets of the iTunes complete library

    You can share a library with as many devices as you want but they cannot have seperate subsets like you wish. They would all have access to all information in the library. You could "Manually" sync content to each device by doing the following:
    On Mac: iTunes > Preferences > Devices Tab > Put a check in the box next to sentence that says "Prevent iPods, iPhones, and iPads from syncing automatically > Then click ok.
    On Pc: Edit > Preferences > Devices Tab > Put a check in the box next to sentence that says "Prevent iPods, iPhones, and iPads from syncing automatically > Then click ok.
    To manually sync data from iTunes to devices see article below:
     http://support.apple.com/kb/HT1351
    If you do not want all devices to have access to all the media from the main library, you would need to create a library for each device. See the article below for more info:
     http://support.apple.com/kb/HT1495
    Hope this helps.

  • My husband and I share a new PC.  We have different music tastes and each have an iphone.  How can we both use our one computer and one itunes program with separate music libraries and separate iphones?

    My husband and I share a new PC.  We have different music tastes and each have an iphone.  How can we both use our one computer and one itunes program with separate music libraries and separate iphones?

    Each device only syncs waht you select.
    Select only what you want for each phone.

  • HT4818 hey, I want to install windows on my mac, I have mac osx lion and I'm soon going to get mountain lion. If I use Boot camp to install windows do I need a windows disc, will i lose all my data, etc. If so how to I save them. Can I switch back to osx

    hey, I want to install windows on my mac, I have mac osx lion and I'm soon going to get mountain lion. If I use Boot camp to install windows do I need a windows disc, will i lose all my data, etc. If so how to I save them. Can I switch back to osx after I install windows. ( can I switch between Windows and OS X as many times as I want.) thanks for answering.
    Sebastian

    hey, I want to install windows on my mac, I have mac osx lion and I'm soon going to get mountain lion. If I use Boot camp to install windows do I need a windows disc, will i lose all my data, etc. If so how to I save them. Can I switch back to osx after I install windows. ( can I switch between Windows and OS X as many times as I want.) thanks for answering.
    Sebastian

  • How can we choose to have different apps, different playlists, different contacts, etc., on each device., while using one itunes to sync more than 1 iphone

    How can we choose to have different apps, different playlists, different contacts, etc., on each device., while using one itunes to sync more than 1 iphone

    Use Multiple Devices with One Computer
    How to use multiple iPods, iPads, or iPhones with one computer

Maybe you are looking for