"Windows can't be installed because this PC uses a compressed operating system"... on an ASUS Zenbook 303LA??

Hi folks,
I've seen a few threads about this WIMBoot issue installing Windows 10 TP on devices with smaller drives (under 32 GB), but I just bought a brand new ASUS Zenbook 303LA with 128 GB, and I'm getting the same error.
Is it not possible to install the W10 TP on any drives with WIMBoot, regardless of size? Has anyone run into this problem, or can anyone think of any other reasons why the install wouldn't work?
(Side note: there's no disc drive for creating a DVD to boot from, and I don't have a USB larger than 2 GB, so that's out too)
Thanks in advance.
It could be too late to tell you this......
http://answers.microsoft.com/en-us/insider/forum/insider_wintp-insider_install/cant-install-windows-10-pc-uses-a-compressed/f5e6863a-51ab-4dee-922f-a5885f07b056?page=1
It can be done by downloading the ISO and use it to install.
See answer given by
Andre Da Costa

Similar Messages

Windows 10 TP - Build 9879 - WIMBoot incompatibilty - "Windows can't be installed because this PC uses a compressed operating system."

Ran into an issue installing the W10 TP today; currently using a laptop who's manufacturer load up windows 8.1 using WIMBoot to save space on the SSD.
Because of WIMBoot, the W10 installer detects that "Windows can't be installed because this PC uses a compressed operating system."
This means that, short of redoing my Windows Install from scratch, I have no way to install the W10 TP, either through the ISO or through Windows Update.
Any chance that this will possible in a future build?

Wimboot needs an image file, that HP uses with Windows8.1 + Bing on
Stream 7 tablet & HP stream laptops11.6" & 13.3"
Hp turned windows 8.1 into image file for using 32gb sd storage
windows 10 until finalised will not be an image file
bye retired techie
This is quite unhelpful, as I am in the same boat on an HP Stream 11, and many others are in this boat as well
According to the System Requirements page for the latest technical preview, Windows 10 is unsupported on
all 16GB WIMBoot devices, but only incompatible on
some 32GB WIMBoot devices, thus seeming to imply that some WIMBoot devices are indeed compatible.
The question is, why are some WIMBoot devices upgrade compatible while others are not? And is it possible to work around this limitation while retaining the WIMBoot configuration and user data, as an option for advanced users?
Furthermore, Windows 10is an image file (install.wim is what's used to install, refresh, and restore Windows). WIMBoot devices, from my understanding, use the install.wim (which currently contain the Windows 8.1 OS) in
a read-only mode, only applying updates and changes as files on the C: drive (so any updated files are located on C: and the originals within install.wim ignored?). Problem is, there has yet to be any explanation from Microsoft, for OEMs or consumers,
on how WIMBoot devices are to be upgraded in the future, as WIMBoot was only introduced with Windows 8.1, and so there hasn't been any major consumer releases of Windows that these devices would upgrade to.

HT5628 Trying to Install Windows 8.1 on my late 2013 21.5" iMac. After I Format the Bootcamp partition, Windows Setup tells me "Windows can't be installed to this disk because it is GPT partitioned." Huh?

Trying to Install Windows 8.1 on my late 2013 21.5" iMac. After I Format the Bootcamp partition, Windows Setup tells me "Windows can't be installed to this disk because it is GPT partitioned." Huh?

You must use the Windows formatter to format your Windows partition NTFS. Please be sure you select the Windows partition otherwise you might end up formatting your OS X partition NTFS.

Mid 2010 iMac upgraded SSD, can't seem to install windows via bootcamp. Windows can't be installed on this storage device. The chosen harddisk contains a MBR-partition-table. Windows can only be installed on GPT-harddisks on EFI-systems error

I have windows 8.1 on DVD & on USB CF Reader/Card. I've followed the full steps in bootcamp, but when it restarts and its time to select the bootcamp partition to install windows (after alt rebooting to the efi startup) I get the "Windows can't be installed on this storage device. The chosen harddisk contains a MBR-partition-table. Windows can only be installed on GPT-harddisks on EFI-systems" error.
I've scoured the internet trying different solutions that seem to work for everyone else, but to no avail. I've reformatted from that screen, doesn't help. I've removed bootcamp partition and manually partitioned using disk util, leaving it empty once partition-wise, and filling it with a blank partition the second time. I've done a full back up and clean re-install of Yosemite, and nothing seems to be working.
Thats when I switched to DVD install, as I heard sometimes you can't install with a CF card. When I alt-boot, I can see EFI-windows and windows, but if I select EFI-windows, same problem as before, and if I select windows, I get the black screen of "no bootable device please insert boot disk and press any key."
I've been stuck w/o bootcamp for over 2 years now. Anyone, please help?
Mid 2010 iMac running 256gb SSD, Yosemite 10.10.1 trying to install windows 8.1

I am having the same problem. Windows is trying to install. It identifies the various partitions but says that I cannot install Windows on the Boot Camp partition or any other. I select Drive options (advanced) and Format the Boot Camp drive, but it makes no difference.
This is the Windows error:
Windows cannot be installed to this disk. The selected disk has an MBR partition table. On EFI systems, Windows can only be installed to GPT disks.
Windows cannot be installed to this disk. This computer's hardware may not support booting to this disk. Ensure that the disk's controller is enabled in the computer BIOS menu.
I am not sure what Csound1 is suggesting with that post above. There are some involved suggestions over here <https://discussions.apple.com/message/23548999#23548999> about using Disk Utility to delete the Boot Camp partition and create new ones - is that the idea?

Trouble Installing Windows 2012 R2 (Windows can't be installed on this drive)

<p>I "binged" this error message and it seems to be beaten to death but my problem is not resolved. Basically, Im trying to install 2012 R2 on a server which currently also has CentOS6.3. Im not doing a dual boot and I want only Windows 2012.</p><p>During
the install process I hit error message below. I have tried partitioning my disk but I end up with Primary partitions and same error as below. I tried pointing the Load Driver option to the right driver for the SUperMicro motherboard but it comes back to the
same error. What am I missing and how can I fix this. All of the other links that the search found point to driver issues but did not mention which drivers exactly. Seems like I cannot upload images, but the error basically shows me
Drive 0 partition 1
Driver 0 Unallocated space
and below it shows me that Windows cant be installed on this drive.
<br />

If you deleted all partitions (don't try formatting), you should have been presented with a volume with no partitions during the installation procedure. You should be able to proceed at that point and Windows will initialize, partition, and format
the disk according to its needs.
If the disk is being shown to you but it still won't accept it for installation (it would be really helpful to get the exact message you are receiving), that is a little strange. Possibly it requires a different driver. At the screen that presents
the volume to use for installation, there is also an option to load a driver. (I have to do this all the time because I am regularly using drivers that are not on the Microsoft installation media). You have to have access to the driver in order
to be able to load it. If the driver is on a CD, you remove the Windows DVD, insert the driver CD, browse to the location of the driver and install it, remove the driver CD, insert the Windows DVD, click refresh on the window, and you should be able
to proceed, if the problem was a driver problem.
The only other time I have had a situation like yours is when I have improperly zoned/masked a LUN from a SAN, but it sounds like you are dealing with local storage, so that most likely will not come into play.
Is this the only hard drive on the system?
.:|:.:|:. tim

Windows can't be installed to this disk. FM2-A55m-E33 board

I finally got past getting windows 7 64 to start the install menu. I had to setup a UEFI flash drive to install windows 7 off of. Now my problem is that I cannot install it lol. I have two exact same drives setup for raid. When you goto windows 7 setup you only see one drive and it says windows cannot be installed on this disk. I went into bios and enabled raid mode. I really don't know what else to do. Any help would be nice.

I did goto the bios and set it to raid mode then selected uefi option. AFter that i went to the uefi screen and did the cfgdrv option or whatever it was called lol and setup raid 1 with the two hard drives. Rebooted then notcied the drive raided drives were not listed in windows installer, chose the raid drivers off thumb drive and now the drive is listed as a single drive. Then i get the message about not being able to install to the disk, it might not be set as bootable disk(something like that). I'm really sorry I don't have perfect descriptions.

Windows cannot be installed to this disk 0. The selected disk has an MBR partition table. On EFI system, Windows can only be installed on GPT disks

Hi All,
I have been trying real hard to install Windows 8 on my Macbook Pro early 2011 model. I followed the instruction given by Bootcamp word to word, all things went very smoothly untill I was asked Windows Setup Instaled to selct the Hard drive. Here's the error:
"Windows cannot be installed to this disk 0. The selected disk has an MBR partition table. On EFI system, Windows can only be installed on GPT disks...."
Let me know guys what should I do?
Thanks,
Attiqe

You have started the Windows 8 installer in EFI mode, and you don't have to start in EFI mode on a Mac because your Mac emulates a BIOS and a MBR partition table in order to install Windows in non-EFI mode.
To start the Windows installer, hold the Option (Alt) key while your computer is starting and have a look at all the boot options you have. You should see two with a DVD above and they must be named "Windows" and "EFI Boot". Choose the option with "Windows" and follow the steps to install Windows. Note that you have to format the "BOOTCAMP" partition from the installer to be able to install Windows.
If you are trying to install Windows from a USB drive, note that your computer isn't compatible to do it

"Windows cannot be installed to this disk. The selected disk has an MBR partition table. On EFI systems, windows can only be installed to GPT disks." Error

Hey Im getting the following error when trying to install windows from a USB.
"Windows cannot be installed to this disk. The selected disk has an MBR partition table. On EFI systems, windows can only be installed to GPT disks."
I installed the windows 8 (64bit) iso using boot camp to a usb. I was able to do this after changing the info.plist to allow me to place the iso on the usb. After I make the partition and start the install, I get the above error. I formatted the partition in the installation but I keep getting this error. I've repreated the entire process but i keep getting this errror and the disk utility says my partition is a Windows NT File System (NTFS) so im not sure what's going on. If you can help me that would be greatly appreciated

I am having the same problem. Windows is trying to install. It identifies the various partitions but says that I cannot install Windows on the Boot Camp partition or any other. I select Drive options (advanced) and Format the Boot Camp drive, but it makes no difference.
This is the Windows error:
Windows cannot be installed to this disk. The selected disk has an MBR partition table. On EFI systems, Windows can only be installed to GPT disks.
Windows cannot be installed to this disk. This computer's hardware may not support booting to this disk. Ensure that the disk's controller is enabled in the computer BIOS menu.
I am not sure what Csound1 is suggesting with that post above. There are some involved suggestions over here <https://discussions.apple.com/message/23548999#23548999> about using Disk Utility to delete the Boot Camp partition and create new ones - is that the idea?

HT201364 I have macbook pro 15", 2,6 ghz, 8gb, osx 10.9 but the pop up window says that maverics can not be installed on this computer. why is that? thank you

I have macbook pro 15", 2,6 ghz, 8gb, osx 10.9 but the pop up window says that maverics can not be installed on this computer. why is that? thank you

Check here > OS X Mavericks: System Requirements

My mac pro says "It can't be synced because this computer is no longer authorised for purchased items that are on this iPad.

But when I de-authorise and then re-authorise it says it's already authorised and then the same window pops up saying "It can't be synced because this computer is no longer authorised for purchased items that are on this iPad.
Battled all day.
Removed the SC folder,
Checked iTunes log in is correct.
Checked Itunes is the same country.
Restarted both devices.
Tried different usb ports
Any ideas?

I found the solution to this problem
the apple service helped me actually
the best and the esiest way is to solve this problem :
create a new account (as an administator recomended)
Bonjour servises must be enabled ( go to control panel > administartive tools> sevices> Bounjour services (change the category to large icons if you dont see administartive tools )
install itunes
sign in
authorize
SYNC
it must sync normally
but if the meesage pops up that points on a particular items that could not be synced ( to ur itunes because you are not authorized for this items ) REMOVE THEM
creating a new user account shows the items wich dont let you sync your iPhone
after you REMOVE those **** items that were not authorised , you can go to your old user account and SYNC it as old kind time
was having this problem 2 weeks , and nothing helped except this was. not deleting the SC Info folder, now copying apple folder to some other mobile divce folder
REMEMBER the problem is in your iPhone , it is about the items that are in your iPhone
Thanks to Apple service
for anyone who needs othe heple you r welcome to ask
will hepl you with a pleassure cause i know how I felt this days:)

Windows can't be installed on Drive 0 Partition 4.

Macbook pro, 13 inch, mid 2012.
2,9 GHz, intel Core i7
8 Gb 1600 MHz DDR3
Version 10.9.5
Hi,
I've been trying to install windows 8,1 Pro, x64 on my
Macbook pro and I followed the instructions of this site " http://www.instructables.com/id/Install-Windows-7-on-MacBook-Pro-with-Retina-Dis pl/?ALLSTEPS "
Everything went smoothly until after step 5, when my computer shout down and a black screen came up and it said "boot device not found..." i searched the web and found that i could press option key after that I could choose between MAC, System recovery, Windows(didn't work) and EFI BOOT. To get too windows installations i pressed EFI BOOT. I started my installation and entered my product key and then i got stuck.
The installation ask me "where i want to install windows" and had 4 options, the last one said BOOTCAMP, so i choose to format my "disk 0 partition 4, BOOTCAMP" as the instructions said. When the disk was done formatting, it become "disk 0 partitions 4" and it also said "Windows cannot be installed to this disk the selcted disk har an MR partition table. On EFI systems, windows can only be installed to GPT disks.
I don't know what to do and i'm kind a new at this, does anybody have any ideas?
Best regards.

guzzzee wrote:
Macbook pro, 13 inch, mid 2012.
2,9 GHz, intel Core i7
8 Gb 1600 MHz DDR3
Version 10.9.5
When the disk was done formatting, it become "disk 0 partitions 4" and it also said "Windows cannot be installed to this disk the selcted disk har an MR partition table. On EFI systems, windows can only be installed to GPT disks.
On your MBP (I have the same model - Model Identifier MacBookPro 9,2), EFI method of installation will cause problems with Graphics/Keyboard/Mouse/Audio. The EFI Firmware on this Mac is a preUEFI model. Such models do not support installation on pure GPT disks. This is from the Bootcamp info.plist.
<key>PreUEFIModels</key>
        <array>
                <string>MacBook7</string>
                <string>MacBookAir5</string>
                <string>MacBookPro10</string>
                <string>MacPro5</string>
                <string>Macmini6</string>
                <string>iMac13</string>
        </array>
The regular method (non EFI boot) is fully supported and uses a BIOS compatibility mode, which only works on a GPT+MBR (aka Hybrid MBR disk). This requires BC Assistant to partition/format (as FAT32). Such a partition needs to be reformatted from FAT32 to NTFS for Windows to install correctly.
You are mixing the two methods by choosing EFI, but partitioning the disk via BCA. I would not recommend using the EFI method on this specific model

Office 2011 14.1.4 Update can't be installed on this disk. A version of the software required to install this update was not found on this volume.

Microsoft update invited me to update to 14.1.4 today but the process fails with the following error:
"Office 2011 14.1.4 Update can't be installed on this disk. A version of the software required to install this update was not found on this volume."
System info:-
OS X
Build# 12E55
SN# C02jjoNFDRV7
Version 10.8.4
Processor 1.7 GHz Intel Core i5
Memory 4GB 1600 MHz DDR3
Startup Disk:- Macintosh HD - 24.15 GB Availble - 120.47 GB Total.
Partition Map Scheme: GUID Partition Table
What I do ?
1-I Click Verify Volume its get error msg " Disk Utility stopped verifying MAcintosh HD"
2- Volume bitmap needs minor repair for orphaned blocks????!!!
3-Invalid volume free blocks count !!!
4-The Volume MAC HD was found corrupt and need to be repaird!! How to repair???
5-Error: This Disk need to be repaired us...es window appears, Choose Disk Utility.
Please I need Full Support for above problem
Kind Regards,
Anas Al Areefi

misalaram wrote:
Csound1@ thanks for reply
i want to install microsoft office in my macbook pro
how can i do tat...plz tell me
Buy a copy of Office for Mac, install it, update it.

I have a Mac 10.5.8 Dual. I cannot get any videos that I have stored to play. I have tried QT and then DL two out side players from apple site and then went to install and comp said can not be installed on this comp.

I have a Mac 10.5.8 Dual. I cannot get any videos that I have stored to play. I have tried QT and then DL two out side players from apple site and then went to install and comp said can not be installed on this comp.

When Microsoft decided not to support Windows Media any more, they made Flip4Mac available for free. If you have not taken advantage of that free download, this might be a good time.
It may not completely solve the problem, but your Mac will play more with the free player. No need to pay for the Upgrades.
http://www.telestream.net/flip4mac/

Install error: "This application cannot be installed because this installer has been mis-configured.

I need help with an error I am receiving. I'm on a Mac with OS X Mavericks. I just attempted to install the Photoshop Elements trial and, in attempting to open the "Install Adobe Download Assistant", I received this error:
"Sorry, an error has occurred.
This application cannot be installed because this installer has been mis-
configured. Please contact the application author for assistance."
I did attempt to download a new copy of the installer, with the same result.

you can download directly:
if you follow all 7 steps you can directly download a trial here: http://prodesigntools.com/photoshop-elements-12-direct-download-links-premiere.html
if you have a problem downloading, you didn't follow all 7 steps, or your browser does not accept cookies.
the most common problem is caused by failing to meticulously follow steps 1,2 and/or 3 (which adds a cookie to your system enabling you to download the correct version from adobe.com).
failure to obtain that cookie results in an error page being displayed after clicking a link on prodesigntools.com

XCode can't be installed because the version of OS X is "too new"

I have Mountain Lion installed on both my iMac and my MacBook, and I'm trying to install XCode from the App Store. It installed on the MacBook without an issue, but when I try to install it on the iMac, I get an error that says "XCode can't be installed because the version of OS X is too new". Is there anything I can do about this? I'm running Mac OS X 10.8.0.
Thanks in advance

Never mind, solution found here https://discussions.apple.com/thread/4135803?tstart=0

"Windows can't be installed because this PC uses a compressed operating system"... on an ASUS Zenbook 303LA??

Similar Messages

Maybe you are looking for