Windows can't find air disk

I have been searching for a long time now and can't find any answer how get my windows xp to connect to air disk..! Can anyone help would be greatly appreciate.
( I use air disk to share data in office, not to syn or anything )
Thx

You need to install the Airport Base Station Disk Agent software that comes on the installer disk with the Airport Base Station. You might be able to download the software from Apple, too. This will put an icon on your system tray that allows you to access the AirDisk.

Similar Messages

  • My window can not find air port

    After caieport utility my PC can not find the base , I have tried numerous times

    I recently purchased one of the new Airport Extreme base stations and after carefully reading the instructions; I first installed the Airport Utility 5.5 that came on the CD onto my MacbookPro. I then connected the new base station to my macbookpro via Ethernet and power it up. I copied a previously saved configuration onto it. All my printers, IMAC and macbookpro were able to connect.
    I then used my older base station and my airport express to extend the N and G networks through the house. My problem was (1) the new Airport utility would consistently lose the older extreme base station and the airport express, (2) An my HP printers keep losing the wireless connection to the new airport extreme base station. The only resolve was to consistently restart the new base station, after which (1) the new airport utility would see the older base station and express again and (2) the wireless connection to the printers would be restored.
    After about a week of this, I removed the new Airport Extreme and replaced it with the older extreme (802.11N DRAFT) and de-installed the Airport Utility 5.5 and re-installed Airport Utility 5.4.2 and everything works fine.
    Has anyone else experienced any problems with the newly released Airport Extreme (fully 802.11N) base stations and Airport Utility 5.5?

  • Windows can't find harddisk (connected through usb-hub to airport extreme) although airport utility can

    windows can't find harddisk (connected through usb-hub to airport extreme) although airport utility can

    There are a number of posts related to copying issues between Windows Vista / 7 and AirPort Disks. Two potential solutions being forwarded are: 1) Changing the LAN Manager authentication level, and/or 2) Disabling the Windows Search feature.
     To change the LAN Manager authentication level:
    From the Windows Vista / 7 desktop, click Start
    Search for: security
    Click 'Local Security Policy'
    Goto Local Policies > Security Options
    Under Policy, double-click 'Network security: LAN Manager authentication level'
    Change level to: Send LM & NTLM responses
    Under Policy, double-click 'Network security: Minimum session security for NTLM SSP based (including RPC) clients'
    De-select 'Require 128-bit encryption'
    Click OK
     To disable Windows Search:
    Start > Control Panel > Programs > Programs & Features
    On the right-hand side, click "Turn Windows features on/off"
    Scroll down, and de-select "Windows Search".
    Press OK, close all windows and restart.
     A third "solution," that has worked for me, is verify that both the AirPort base station and the Win7 PC are using the exact same Workgroup Name. In my case, I use "WORKGROUP" (without the quote marks) for this name. From the AirPort Utility, you would enter this value on the Disks > File Sharing tab. On Win7, Start > Control Panel > System and Security > System > Change Settings > Change > Workgroup

  • I cant access firefox, everytime i try i get that windows can't find the file, i tried redownloading it but it still gave me the same message?

    i cant access firefox, everytime i try i get that windows can't find the file, i tried downloading it again but it still gave me the same message. the problem has nothign to do with my internet because it wonks on internet explorer and everythign is fine, my computer just can't access firefox for some reason. i tried uninstallign ti adn then installing it again, but that didnt work, i tried installing a different version and it still didnt work.
    okay the exact message is" Windows cannot find 'C:\Program Files\Mozilla Forefox 4.0 Beta 1\firefox.exe'. make sure you typed the name correctly, and then try again. To search for a file, click the Start button, and then click Search.
    Nothing happens after i install is the "Launch Firefox now" checkbox set, the same message comes up.
    i usually start firefox from the shortcut i have on my desktop but when this happened i thought that the shortcut is the problem, but i went to the Mozilla firefox folder and tried it from there, but it didnt work. i also tried downloading different versions of firefox but that didnt work either.

    can you tell me the solution to "windows cant find firefox" error. thanks.

  • How can I create a start up disk for a old intel core duo running 10.5.8.. Computer works fine, but can't find install disk.

    How can I create a start up disk for a old intel core duo running 10.5.8.. Computer works fine, but can't find install disk. Want to use internal disk drive or USD flash drive.

    Try calling 1-800-676-2775.  Give the serial number and thy *may* still burn you new install disks designed just for the hrdware in your system (for a fee, something like $160 per disk).  *May* is only because they may not burn disks for Leopard anymore.
    If they do not burn them for you, you can buy Leopard disks off Amazon or eBay for about $200.
    Have you considered Snow Leopard?.  Those disks only cost $19 (single user) or $29 (5-user license) through Apple by calling 1-800-MY-APPLE.

  • Why am I getting an error message,"windows can not find(my Yahoo mail launch address)"when accessing Yahoo mail site?

    Using WindowsXP, and e-mail via Yahoo,browser is Firefox 4.0.I get the following error message when accessing yahoo mail site:"http://us.f831.mail.yahoo.com/dc/launch?action=welcome&yy=1782408664&.rand=0qrsdp1o...Windows can not find(the above address is inserted here).make sure you typed the name correctly,and try again". After this message is displayed on my desktop it begins to fade,and the inbox of my yahoo mail is then displayed..I am able to work all functions of the mail without problems.( I might add at this point that i access the mail program via a desktop icon).When I close out of the program the error message box with the error described above is displayed again on my desktop.I must click on the "X" to remove it.I can access my yahoo mail via Internet Explorer with no problem,as well as accessing via my yahoo home page.

    Here's an image of the ERROR Message. I'm not sure how this forum works -- if this image is an attachment or if it shows up in the body of this reply.
    Here goes...

  • I am experiacning problems,with yahoo messenger,everytime i try to go into e-mail or go to a site thru yahoo,i get a windows saying windows can't find due to cookis ,not set or something,but will still let me go to the site i wanted,how do i fix it?

    every time i either go into yahoo email,or type in a site on my messenger list,i get a "windows can't find"and says my cookies,need to be reset or configured wrong,but still allows me to go where i want to.....how can i get rid of it?

    1. You cannot make changes in iTunes: it only reads the feed. You have to make any changes in the feed itself - in your case in Podomatic. When for example you add a new episode you simply add it to the feed. There is no need to do anything else; subscribers will see it almost immediately and the Store will update in 1-2 days.
    2a. I can't adviseon the specifics of Podomatic. The 'itunes:new-feed-url' must be added to the RSS feed, not to the web page which is where it looks as if you are trying to add it. iTunes does not read the web page, only the feed. I have a feeling that Podomatic will not allow you access to the feed to add this tag, but I don't know for sure. If you can't add it you will have to contact Support at podcasts 'at' apple.com and ask them to move the Store to using a different feed.
    You can see a sample feed on my page at
    http://wilmut.uk/pc
    2B. I'm afraid I can't advise on WordPress either. You will need to make sure you have set it to produce an iTunes compliant feed.
    If you want me to check whether a feed is correct you can post the URL here.

  • I have just had my hard drive replaced and now I can.t find Air Port to get wi fi

    I have just had my hard drive replaced and now I can't find Air Port for my wi fi

    Go to your Applications folder>Utilities>AirportUtility.app>and there set up your Airport service.  Then return to your Applications folder>Sytem Preferences>Network> and there turn on the WiFi on your iMac.
    Hope this helps

  • Can't find air video in system tray on my pc. Recently updated op system from xp to win7. already reinstalled itunes and synced ipad.

    Can't find air video in system tray on my pc. Recently updated op system from xp to win7. already reinstalled itunes and synced ipad.

    Carol L wrote:
    Hi Deggie....I did figure that out since I posted the original question, and I downloaded ther server again and tried it out, but it can't connect. Any ideas?
    -> http://www.inmethod.com/airvideo/troubleshooting.html
    -> http://inmethod.freshdesk.com/support/solutions

  • Tried to print from ipad4 with wifi printer. Saying can't find air printer. Printer on and it has printed previously.

    Tried to print from my ipad 4 but saying can't find air printer. It has printed before.

    Sharonanthony-
    First, try double-clicking your Home button.  A row of recent Apps will line up along the bottom of the screen.  Scroll across and look for the Print Center icon.  If it is there, you should be able to delete any print job that might be hanging it up.
    If you can access the internet, then you should have a good connection to a printer that is using the same WiFi.  If you do not have your normal connection to the internet, then I suggest you unplug your WiFi router for a few seconds.  Then reset the iPad's network at Settings-General-Reset-Reset Network Settings.  You will need to reconnect the iPad to WiFi.
    Fred

  • Can't find AIRes.dll when updating AI CS6 to 16.0.5

    I get the following message when I try to update AI CS6 ver. 16.0.3 to 16.0.5:
    "Can't find AIRes.dll. Please re-install the application"
    I uninsatlled and reinstalled and changed permission to admin. Restarted computer and still get message.
    Win 8.1
    16 Gb RAM

    Refer to the doc.
    http://helpx.adobe.com/security/products/illustrator/apsb14-11/_jcr_content/main-pars/down load/file.res/Install%20Instructions%20for%20Illustrator%20CS6%20Hotfix.pdf

  • Can we find ASM DISK on which a DB datablock exists ?

    Can we find ASM DISK on which a DB datablock exists ?

    Hi,
    Yes in some cases I think, its not easy though - it would also be dependent on how your disk group is configured, for instance if you have variable extent sizes then it will be much more difficult.
    Why do you need to do this?
    Thanks
    Paul

  • HT4356 Can't find air printer: Help?

    IPad can't find air printer. Both are connected.

    Without any details all we can do is guess and offer general suggestions. Have you worked through all the troubleshooting steps in the support article from which you came? Confirmed that your printer supports AirPrint? Checked with the printer manufacturer to see if there is any firmware update available/necessary?
    Regards.

  • HT4414 I accidentally deleted garageband and I can not find the disks how to recover it?

    I accidentally deleted garageband and I can not find the disks how to recover it?

    Replacement System Discs can be obtained from Apple's Customer Support - US (800) 767-2775 for a nominal fee. You'll need to have the model and serial number of your Mac available. 
    If you're not in the US, you may need to go through the regional Apple Store that serves your location to find the contact number - http://store.apple.com/Catalog/US/Images/intlstoreroutingpage.html

  • Windows can not find ' FILE ': error.

    I have downloaded and installed the production version of SQL Developer. (1.0.0.14.67)
    Windows XP SP 2.
    When I started it for the first time I checked all the file association check boxes.
    If I double click on a .sql file the following windows error occurs:
    Windows can not find '<file>'. Make sure you typed the name correctly, and then try again. To Search for a file, click the Start button, and then click search.
    SQL Developer does startup. The error message is closed when the OK button is selected.
    Any Ideas?
    Regards;
    Robert

    Hi Robert,
    Just to confirm, SQL Developer does actually open the file. The only issue is the error message displayed. I have logged a bug for that.
    There is a work around until that is sorted. If you use explorer to associate the file types with SQL Developer, they open without this error.
    Regards
    Sue

Maybe you are looking for