Windows Cannot Open File...?

I have downloaded the AIR and other software for the Kuler
Website, and I have Indesign CS3 (not Illustrator though), and
every time I try to open up a downloaded Kuler swatch (whether
right away or in "load swatches") it says Windows will not
recognize the file because it does not know where it came from. I
tried to going online to remedy the problem, but that is no help
either.
Suggestions? Do I need to purchase some other kind of
software to use Kuler fully?

Hi, if the downloaded kuler file is a .ASE file InDesign
should recognize it. Can you give some steps to repro (e.g., first
I find a theme I like in the kuler desktop, then I go to kuler and
download it... etc.) and your OS/browser info? That really helps
our QA team. Thanks,
Sami

Similar Messages

Downloaded iTunes but Windows cannot open file

I am on my shiny new Toshiba notebook and I cannot open the iTunes program I just downloaded. When I try to open and run it I get a Windows message that it needs to know what program created it. How do I open a .pf file? I never had this problem on my other computer with iTunes. It doesn't show up in the run/remove program window when I try to uninstall it? I would appreciate any thoughts or suggestions.

Hi, if the downloaded kuler file is a .ASE file InDesign
should recognize it. Can you give some steps to repro (e.g., first
I find a theme I like in the kuler desktop, then I go to kuler and
download it... etc.) and your OS/browser info? That really helps
our QA team. Thanks,
Sami

TS3212 Still unable to download itunes to my pc. Tried with IE, Mozilla and Google Chrome. Keep getting an error message :"Windows cannot open itunes.exe the file is corrupt contact support."previous itunes files were wipped out by "disk cleaner." Any hel

Still unable to download itunes to my pc. Tried with IE, Mozilla and Google Chrome. Keep getting an error message :"Windows cannot open itunes.exe the file is corrupt contact support."previous itunes files were wipped out by "disk cleaner." Any help??
Please!
Thanks!

If anyone is reading this still looking for what caused the issue and how to fix it here is what I discovered.
The antivirus program our company uses, Bitdefender Antivirus Plus, was causing some of the PDF files not to open. After troubleshooting the different modules and settings the culprit was..
Scan SSL in Privacy Control Settings. Turning it OFF solved the problem and all the PDF files that previously would not open now open just fine. This issue has been sent to Bitdefender for them to review. If you use a different antivirus program and are having this issue try locating the Scan SSL setting and see if turning it off solves the problem.

I cannot open files attached to an excel spreadsheet. I am using office for mac 2011. when double clicking object I only get the picture modifier windows.

I cannot open files attached to an excel spreadsheet. I am using office for mac 2011. when double clicking object I only get the picture modifier windows.

Preventing Microsoft Office to open recent documents at startup in Mac OS, Please see:
http://www.frenchguys.com/wordpress/preventing-microsoft-office-open-documents-startup-mac-os-lion/
It seems that the solution works for most people.
In a terminal, enter the following:
defaults write com.microsoft.Excel NSQuitAlwaysKeepsWindows -bool false

Cannot Open File explorer, control panel, basically windows linking to hard disk

I cannot open file explorer or control panel, and I have difficulty contacting ppl at microsoft because the site insist I give a product ID. My windows is pre-installed in my hard disk. sigh. can anyone help?

Hi AsusS550C user,
What is your current situation?
Have you tried the suggestions provided by the others?
In addition to the above suggestions, if we could access PC settings, we could take a PC refresh or a system restore.
How to refresh, reset, or restore your PC
Further, if issue still insists, take a try with the following command:
Dism /online /cleanup-image /restorehealth
Reference:
Fixing component
store corruption in Windows 8 and Windows Server 2012
Best regards
Michael Shao
TechNet Community Support

Installing CS5.5, got an error window that says "windows cannot open this file"

I download the CS5.5 files. Clicked on the larger file to open it and received an error window stating that "windows cannot open this file". Any suggestions?

@caroline,
are both files in the same directory?
are you clicking the exe, not the 7z?
if yes to both, right click the exe and click 'run as administrator'.
if that fails, run the cleaner (Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6) and then click the exe.

The installation was canceled: Install Windows: Windows cannot open the required file E:\sources\install.wim Error code: 0x80070570

I have a Windows XP computer and accidentally formatted the C:\ Drive. I then decided to buy the Windows Vista CD installation and popped it into the CD Drive, there was a problem with the Drive so I had to move it onto a USB Drive instead(on another computer).
When I booted my PC(C: Drive formatted) all went well until I typed in the product key and clicked next. It shows a dialog box:
Install Windows
Windows cannot open the required file E:\Sources\Install.wim. The file may be
corrupt or missing. Make sure all files required for installation are available, and
restart the installation. Error code: 0x80070570
I am in urgent need of help immediately. Please help me!
P.S. and thanks for advance for any help. Sorry for anyone with the same problem.
PC info: HP dc5750 Small Form Factor

It sounds like there's a problem with that file. You will need to re-copy the files to USB or even re-download the operating system from Microsoft.

I am trying to open CR2 files from a Cannon EOS 1DX camera in Photoshop CS6 and I have already updated the Camera Raw Plug in but Photoshop is still giving me the cannot open files dialog box? Help?

I am trying to open CR2 files from a Cannon EOS 1DX camera in Photoshop CS6 and I have already updated the Camera Raw Plug in but Photoshop is still giving me the cannot open files dialog box? Help?

Canon 1DX support was added to ACR in version 6.7, 7.1. An updated CS6 should be at level ACR 8.6. If your ACR is not at level 8.6 try using CS6 menu Help>Updates. If that does not install ACR 8.6 try downloading the ACR and DNG 8.6 converter and see if ACR 8.6 will install into your CS6.
Adobe - Adobe Camera Raw and DNG Converter : For Windows
Adobe - Adobe Camera Raw and DNG Converter : For Macintosh

Finder cannot open files in the "volume" format.

I had to downgrade from the second Yosemite beta in order to run one of my applications for work that didn't run on Yosemite. I've successful reinstalled Mavericks to the chagrin of finder not working at all. Whenever I mount a DMG I get "Finder cannot open files in the “volume” format." Also, whenever I click to open a folder or a new window in finder, it just crashes and relaunches. I'm going to try to do a fresh install of Mavericks and recover from a backup. Let me know if you guys have faced this same issue and found a solution.
I also had to regain admin privileges for my user which I have done successfully.

I fixed my problem by installing Mavericks again. No need to fully restore.

INDD CS6 error: "InDesign cannot open files in the "InDesign CS5.5 Document" format.

Working in CS6 on Mac OS X 10.7.5: When I double click an INDD file in the Finder, I get the following error from InDesign:
"The document "doc name" could not be opened. InDesign cannot open files in the "InDesign CS5.5 Document" format."
This just started recently and I have not been able to figure out why. I have not updated INDD or OS X. I can't think of anything else that changed, other than maybe a Java update. Have not updated to the latest OS yet.
The files I'm trying to open are files I created with CS6 - as recent as a few minutes ago. I can open them fine using the File>Open command in InDesign so I can open them, but I can't open them by double clicking them in Finder or dragging them to the INDD icon in the dock.
The info in Finder's "Get Info" window says they are CS6 files set to open in CS6 and I have permissions to read and write. They are not locked.
This is not incapacitating, but rather annoying and slows me down since this is one of the most common ways I open files.
Any suggestsion would be appreciated.

Probably won't work because it sounds like an OS problem of some sort, but you can try trashing the prefs. See Replace Your Preferences

CS5 InDesign cannot open files in the InDesign CS5 document format

I'll be working in InDesign CS5 with no problems then at some point I'll double click on an InDesign file and a window comes up and says - InDesign cannot open files in the InDesign CS5 document format. Sometimes when this happens I have to completely reboot my whole system before I can get InDesign to function correctly. Is this a flaw with CS5? Did not happen with previous versions. It doesn't always happen but I can't figure out what causes it. Would appreciate anyones help. I'm getting to really HATE InDesign!!

I have not uninstalled and reinstalled, but I did just switch over to another workstation using Time Machine. The previous system was Leopard. This one is running Snow Leopard.
I'm not sure how to parse this. When you say "switch over to another workstaiton using Time Machine" do you mean, "started using another machine that happens to be using Time Machine for backups and is also running 10.6 instead of 10.5"?
Or do you mean, "Used the Time Machine program to upgrade from 10.5 to 10.6?" If you mean the second one, well, I can't say I am surprised that things are messed up. And that would make your problem rather different than the other posters, which is good reason for you to have started your own thread (and thus your own solution)....
I'm a little bit leary of getting in and changing things in Terminal, without understanding what I am changing. Plus this is a workstation at work, so if I screw something up, that is not a good things, and I don't have time to spend a day fixing things back up again, with the way our workload is.
Well, you can find a lot of marginal documentation about lsregister and Launch Services, but I wonder whether your understood the ramifications of messing with Time Machine (or maybe I have misinterpretted you!). I'd be surprised if you found another way to fix this, other than uninstall/reinstall.
Good luck.

Plugin development for premiere, adobe example error LNK1104: cannot open file 'C:\Program Files\Ad

Hello,
I downloaded the Premiere Pro CS 5.5 Win SDK, i open the project SDK_Exporter in Visual Studio 2008, when i hit debug i get the following error
Error
1
fatal error LNK1104: cannot open file 'C:\Program Files\Adobe\Common\Plug-ins\CS6\MediaCore\ExporterSDK.prm'
How can i resolve ?

RESOLVED LOOKING AT THE PAST
1.Zac Lam,01-dic-2013 10:43   in reply to Alex B MartinReport
Hi Alex, Are you launching Visual Studio with administrative privileges? If not, you won’t be able to generate the .aex in certain protected folders because of a Windows security restriction.
Was this helpful? Yes   No
Reply
|Mark as:
Unmark as Correct
|Translate
7 posts
03-ene-2013
2.Alex B Martin,01-dic-2013 12:34   in reply to Zac Lam
Yes it works, thanks Note: For CS 5.5 Administrative privileges are not need, so thats only with visual studio 2010 and premiere cs6 where i need to run vs2010 as admin.

FRM-10043 Cannot open file in LINUX

FRM-10043: Cannot open file.
I have created a form sucessfully in windows.It works fine.
Now i have to use it in LINUX. So i copied the fmb file into the Linux
where the default test.fmx is placed.
Now i executed the below query and i got the result cannot open file.
[orabif@br bin]$ sh frmcmp_batch.sh userid=CNT/CNT@cmt
compile_all=yes module_type=form module=logonfile.fmb
Forms 10.1 (Form Compiler) Version 10.1.2.0.2 (Production)
Forms 10.1 (Form Compiler): Release - Production
Copyright (c) 1982, 2005, Oracle.
All rights reserved.
Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
PL/SQL Version 10.1.0.4.2 (Production)
Oracle Procedure Builder V10.1.2.0.2 - Production
Oracle Virtual Graphics System Version 10.1.2.0.0 (Production)
Oracle Multimedia Version 10.1.2.0.2 (Production)
Oracle Tools Integration Version 10.1.2.0.2 (Production)
Oracle Tools Common Area Version 10.1.2.0.2
Oracle CORE 10.1.0.4.0 Production
FRM-10043: Cannot open file.
Form not created
Plz help me to solve this problem.
*I know that there is no need to compile OLB files. but my forms shows error that
FRM-18108 Failed to Load objects.
when i use Frmcmp.sh GUI the form is compiled succesffully if there is no OLB attached with it.
It gives Fr-18108 when OLB is attached with he form
A timely help is needed...
Thanx in advance..
with cheers
sprity....

sprity,
Did you copy the .OLB file(s) to your LINUX server also? If not, you will need to copy them as well as your forms 'Inherit' the shared objects from the .olb's so they have to be present in the FORMS_PATH on the server when you compile your .fmb's. If you did copy them, first make sure they were copied via Binary Mode and if so, then I would refer you back to Grant's post and suggest you make sure the files were copied via 'Binary' mode to the LINUX server. Rather than Copy and Paste the files, you may want to FTP from a command prompt or a FTP Program so you can ensure the files are moved to the LINUX server in Binary mode.
Craig...

Captivate Cannot Open File Error

VERY simple project is generating error above.
Menu screen with some buttons linked to F4V files inserted as "slide Videos". The videos are large files and run in 1024 x 768. It saves properly after a looong time compressing and will not open. This only happens after I've inserted the slide videos and linked to the buttons.
The error says " Cannot open file XXXXX. Ensure that file is not open already etc....."
I've done this a tonne of times before and can't figure out what is happening.

I'll presume you're using windows, but it should be similar with Mac.
1) ensure your files are all stored locally. Saving on network drives will cause some significant delays opening/saving/closing.
2) look in the folder whre the file is saved and enable viewing hidden files, if it isn't already. Tools > Folder Options > View > Hidden files and folders > Show hidden files and folders
3) look for a file names something like ~cp_prj_name_of_project.cptx_lock If you are confident the file is not open somewhere, delete that _lock file and try to open the project.
That lock file keeps 2 people from opening the project at once. Sometimes the _lock file is not cleaned up properly when the project is closed (usually when there's a crash). Hopefully that fixes it for you. If not there is a way to try and retrieve the file from backup (if you have backups turned on) or from the cache.
Any luck?

Error LNK1104: cannot open file 'MSCOREE.lib'_In visual studio 2013

Hi,
I have upgrade the window application from vs 2008 to vs 2013 after upgradation, when i m trying to build madelineDll I am getting this error LNK1104: cannot open file 'MSCOREE.lib'
MadelineDLL
Can someone help me to resolve this ASAp.
Thanks in advance
Archana K.

Hello archana,
From your description, this exception seems to be related with the C++, if so, i suggest you could post this issue to the C++ forum and i notice that this issue is caused by the upgradation of Visual Studio, you could aslo ask it on the Visual
Studio forum to confirm if the VS2013 has some changes compared with VS2008. I move it to the where the forum for, there are forum experts would help redirect it to a proper forum.
The current forum you posted to is for .NET class libraries.
Regards
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Windows Cannot Open File...?

Similar Messages

Maybe you are looking for