Windows cannot start the TAO NT Naming Services on Local Computer

Hi forum
i am using SAP Business One Version 9 Pl 4 i wanted to log on into Business One but it gave me an error that i have to start TAO NT Naming services and then restart licence manager. However trying to start the TAO NT Naming services gave me the following error "Error1053: The service did not respond to the  start or control request in a timely fashion"
Please Asssit
Regards
Alwin.

HI,
Please check with this http://scn.sap.com/thread/3433632 and  SAP note 1142479  &
1741888
Thanks & Regards,
Nagarajan

Similar Messages

  • Windows could not start the distributed transaction coordinator service on local computer

    Dear All,
    I'm having an issue starting the DTC service in windows 7 OS. I always got the error message below when im trying to start it.
    "Windows could not start the distributed transaction coordinator service on local computer"
    Thanks,
    Melvin

    Hi Melvin,
    Please try the following methods to solve this issue:
    Method 1: Re-create the MS DTC log, and then restart the service.
    Click
    Start, type cmd in the search box, and then press
    Enter.
    Type the command
    msdtc -resetlog at the command prompt, and then press
    Enter.
    Warning: The msdtc -resetlog command can cause data corruption if it is used incorrectly. Make sure that you do not have any pending transactions when you run this
    command.
    Type the command net start msdtc, and then press
    Enter.
    Method 2: Set the logon account permissions for the MS DTC service
    If Method 1 does not resolve the problem, set the logon account for the MS DTC service to have read and write permissions for the Msdtc.log file. Please follow the steps below:
    Click
    Start, type cmd in the search box, and then press
    Enter.
    Type the command
    control admintools at the command prompt, and then press
    Enter.
    Double-click
    Services.
    In the Services pane, locate
    Distributed Transaction Coordinator.
    In the
    Log On As column, note the account name.  Note: The default logon account for the MS DTC service is the NETWORK SERVICE account.
    Start Windows Explorer, and
    then open the %windir%\System32\Msdtc folder.
    Right-click the
    Msdtc.log file, and then click Properties.
    Click the
    Security tab.
    Click the logon account name that you noted
    in step 5. For example, click the NETWORK SERVICE account name.
    In the
    Permissions pane, click to select the Allow check box for the following permissions: ◦Read & Execute  
    ◦Read    ◦Write
    Click
    OK.
    Click
    Yes to accept the security warning.
    In the
    Services pane, right-click Distributed Transaction Coordinator, and then click
    Start.
    Method 3: Assign permissions to the NETWORK service to traverse the directory tree
    Determine whether the NETWORK service has permissions to traverse through the folder. To do this, follow these steps.
    Note: By default, the "Everyone" group has these permissions. For more information, go to the following Microsoft TechNet website:
    Bypass traverse checking
    Click
    Start, type secpol.msc in the search box, and then press
    Enter.     
    Browse through the following computer configuration: 
            \Windows Settings\Security Settings\Local Policies\User Rights Assignment 
    Check for "Bypass traverse checking," and then add the "Everyone" group. 
    Update the Group Policy settings on the computer. To do this, click
    Start, type gpupdate in the search box, and then press
    Enter.
    In the
    Services pane, right-click Distributed Transaction Coordinator, and then click
    Start.
    Regards,
    Lany Zhang

  • Windows could not start the Network Location Awareness service on Local computer

    i have a dell inspiron 1501 laptop running windows vista home premium media center edition. i have recently been getting an error when trying to view networked computer saying  "connection status: unknown" and "the dependency service or group failed to start". i started by disabling and re-enabling the driver and that did not help. i then brought up the services.msc thing and started looking at the networking services. i noticed that the Network Location Awareness service was not started so i tried to start it. i got a popup message saying "Windows could not start the Netwrok Location Awareness service on Local Computer. Error 0xc000096: 0xc0000096".
    i also get an error popup when i try to start the Network List service saying "Windows could not start the Network List Service service on Local Computer. Error 1068: The dependency service or group failed to start".
    what might i have done to make this happen and what can i do to try to fix it?
    haus

    Hi,
    Thank you for the post.
    I fully understand the inconvenience the issue has been caused and the current situation can be frustrating. Please try the following steps for troubleshooting.
    1.    Please start the computer in Safe Mode with Network and check the result. If the issue disappears, please perform a clean boot.
    For the detailed steps, please refer to the step 1 and 2 in the KB article 936214 (http://support.microsoft.com/kb/936214).
    2.    If the issue persists, please check the system file by using the command SFC /scannow.
    For more information, please refer to the KB article 929833 (http://support.microsoft.com/kb/929833).
    If the above suggestions do not resolve the issue that service fails to start up, please understand that debug and dump analysis may be required for further troubleshooting. Also, in most cases, it is necessary to check the source codes. However, debugging is out of our forum’s support boundary. A support call to our product service team is needed for the debugging service. In this case, I’d like to suggest contacting Microsoft Customer Support Service (CSS) for assistance so that this issue can be resolved efficiently.
    To obtain the phone numbers for specific technology request, please check the website listed below:
    http://support.microsoft.com/default.aspx?scid=fh;EN-US;PHONENUMBERS
    Thank you for your understanding.
    Sincerely,
    Joson Zhou
    Microsoft Online Community Support

  • Wndows could not start the SQL Server (MSSQLSERVER) service on Local computer

    I have 2 instance of SQL Server in same server. A is installed first and B next.
    Somehow A cannot start at all when I try to start from Windows Services.
    B can be started normally.
    A worked normally week ago. There has been only one thing what I may have to server since that.
    I have installed MondoDB. Currently MondoDB it is stopped. 
    windows could not start the SQL Server (MSSQLSERVER) service on Local computer
    Error 31: A device attached to the system is not functioning.
    Kenny_I

    I don't see anything special in event logs.
    Data file of both SQL Server instance are located on same C drive of same server.
    Kenny_I
    Hello Kenny,
    The main issue is not related to SQL server .SQL is at receiving end its hardware or the cables ( not sure which one) are the one causing issue.
    I serached
    http://social.msdn.microsoft.com/Forums/windowsdesktop/en-US/111da2ae-0a86-41a5-ba03-7d1c0cc91ea9/windows-error-code-31a-device-attached-to-the-system-is-not-functioning-properly?forum=wdk
    http://www.chicagotech.net/netforums/viewtopic.php?f=1&t=6467
    Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

  • Could not start the Oracle BI server service on local computer - error 1067

    Hi Guys,
    i've successfully installed the BI.however when i try to start the BI service, i get the above message.any ideas to fix this ?
    Thanks
    Jag

    This error occurs after an initial install, when the Oracle suite is installed logged in as the user(who has admin rights on the machine). If this is the case,
    1.Go to Services (Admin Tools > Services)
    2.Double click the Oracle services( BI Server or Presentation or TNS Listener).
    3.Go to Log On tab
    4.If local system account is checked , un-check that option. Check "This Account" option
    5.Give the user information for that machine(e.g domain\username)
    6.Specify password associated with the user ( the username/pwd that is used to login to the machine)
    7.Confirm pwd and click Apply.
    8.re-start the service.
    This is what i did , and it worked.
    good luck and hopefully oracle addresses these issues , they become frustrating to use the product.
    Thanks,
    Ram

  • Itunes 11 will not install on my Windows 7 computer because it cannot start the 'Apple Mobile Device' service, what can I do?

    itunes 11 will not install on my Windows 7 computer because it cannot start the 'Apple Mobile Device' service, what can I do?

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (Later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    See also HT1925: Removing and Reinstalling iTunes for Windows XP or HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    Should you get the error iTunes.exe - Entry Point Not Found after the above reinstall then copy QTMovieWin.dll from:
    C:\Program Files (x86)\Common Files\Apple\Apple Application Support
    and paste into:
    C:\Program Files (x86)\iTunes
    The above paths would be for a 64-bit machine. Hopefully the same fix with the " (x86)" omitted would work on 32-bit systems with the same error.
    tt2

  • Windows cannot start the installation process

    I have windows server 2012 datacenter with hyper-v role that I tried to upgrade to R2 RTM.
    All went fine until the reboot and the error "windows cannot start the installation process"
    I can start windows server 2012
    I must say that I used a ISO file using DRAC for the install.
    Is there a log to check for errors?

    Hi,
    Just a thought, check to see what your BIOS settings are on your computer.
    This problem is usually related some potential problem in the disk or BIOS or faulty hardware. The BIOS sometimes limits the read/write scope of boot sectors, to avoid virus attack. 
    Review the BIOS setting, if there’s any Anti-Virus settings, just disable it, and then start the install again. 
    Regards,
    Yan Li
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • When starting the AMDS it just says "the apple mobile device service on local computer started then stopped. Some services stop automatically if they are not in use by other services or programs."... help?

    when trying to fix the ipod syncing/recognition by starting the AMD (apple mobile device) in admin tools section on my computer it came up with the message in the question aboce (the apple mobile device service on local computer started then stopped. Some services stop automatically if they are not in use by other services or programs.)
    i have restarted my comp etc and reinstalled itunes... recurrent issue.
    note - i wiped my ipod before this issue occurred, does this affect the problem?

    I would start with
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    or
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    Next see the the other actions of the following concerning the AMD
    iOS: Device not recognized in iTunes for Windows

  • "could not start the Oracle BI Presentation Server on Local computer error"

    Hello Folks,
    i am trying to start the OBIEE Presentation services, The OBIEE server and Java Host Services are started.
    i am getting this error and i didnt change any settings and finally getting this error
    "Windows could not start the Oracle BI Presentation Server on Local Computer. For more information, review the System Even Log. If this is a non Microsoft service contact the service vendor, and refer to service-specific error code -1."
    thanks

    Here is the solution from another freind
    1. Stop BI Server Service > Start BI Server Service > Start BI Presentation Service. If that doesn't work...
    2. Restart machine and follow step 1. If that doesn't work...
    3. Check instantconfig.ini file and check syntax is correct. Also check java directory path mentioned is the valid one. If that doesn't work...
    4. Rename the catalog folder to something else and follow step 1. It will create new catalog folder. Then copy _Shared from old catalog folder and you are good to go.
    catalog folder will be in oraclebidata/web/catalog...
    either delete the folder and create a new empty one or rename it
    also have a look at instanceconfig.ini file
    thanks

  • Error 3: "Windows cannot start the Firefox Service on Local Computer...?

    When I click on the Services option under Microsoft Management and try to start the FIREFOX SERVICE I get this hiccup:
    '''Windows could not start the Firefox Service on Local Computer;
    Error 3: the system cannot find the path selected'''
    ...Any suggestions on how I can hep Windows find that path?
    --I have a heck of a time getting windows to signal my Firefox browser--takes several clicks and over 6 or 7 minutes to emerge!
    Thank you for your attention.
    marlem388

    Hi again, cor-el--
    Many thanks for your help and diligence.
    ...I went through your advised operations, made sure I didn't delete my Personal Profile, and so on.
    --Did not have a hard time uninstalling Firefox, and after I got rid of the downloaded file,
    I continued re-installing Ff.
    So all you suggested was fine and effective,
    '''BUT''' I still get this weird message under Services in Administrative Tools:
    '''Windows could not start the Firefox Service on Local Computer; Error 3: the system cannot find the path selected'''
    --All the same, despite Local Computer's stubbornness , Firefox does emerge sooner than before, and I have you to thank for it.
    Some day I will learn why Error 3 keeps being blind to Ff's path!
    marlem388

  • I cannot start the "SQL Server Reporting Services (SCE)" service

    Attempts to run any of the Windows Computer Reports fail with an error:
    Date: 10/29/2008 10:19:30 AM
    Application: System Center Essentials
    Application Version: 6.0.1251.0
    Severity: Error
    Message: Cannot initialize report.
    Microsoft.Reporting.WinForms.ReportServerException: The Report Server Windows service 'ReportServer$SCE' is not running. The service must be running to use Report Server. (rsReportServerServiceUnavailable)
       at Microsoft.Reporting.WinForms.ServerReport.GetExecutionInfo()
       at Microsoft.Reporting.WinForms.ServerReport.GetParameters()
       at Microsoft.EnterpriseManagement.Mom.Internal.UI.Reporting.Parameters.ReportParameterBlock.Initialize(ServerReport serverReport)
       at Microsoft.EnterpriseManagement.Mom.Internal.UI.Console.ReportForm.SetReportJob(Object sender, ConsoleJobEventArgs args)
    My attempts to start the "SQL Server Reporting Services (SCE)" service fail with an error:
    Could not start the SQL Server Reporting Service (SCE) service on Local Computer.
    Error 1053: The service did  not respond to the start or control request in a timely fashion.
    The application log in the event viewer has hundreds of instances of Event ID 107:
    Event Type: Error
    Event Source: Report Server (SCE)
    Event Category: Management
    Event ID: 107
    Date:  10/29/2008
    Time:  10:36:25 AM
    User:  N/A
    Computer: DC
    Description:
    Report Server (SCE) cannot connect to the report server database.  For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
    Please help.

    Thanks for the link to the Reporting Services forum.  I found the fix in this thread:
    https://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=3644545&SiteID=1
    I had to create a registry key and reboot:
    1.
    Click Start, click Run, type regedit, and then click OK.
    2.
    Locate and then click the following registry subkey:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control
    3.
    In the right pane, locate the ServicesPipeTimeout entry.
    Note If the ServicesPipeTimeout entry does not exist, you must create it. To do this, follow these steps:
    a.
    On the Edit menu, point to New, and then click DWORD Value.
    b.
    Type ServicesPipeTimeout, and then press ENTER.
    4.
    Right-click ServicesPipeTimeout, and then click Modify.
    5.
    Click Decimal, type 60000, and then click OK.
    This value represents the time in milliseconds before a service times out.
    6.
    Restart the computer.
    After the reboot, the service was running.  Thanks for your help with this.

  • TAO NT Naming Service failed to start

    HI,
    When trying to upgrade to 8.8 we get an error message when the TAO NT Naming Services tries to start. It says "The applicaton has failed to start because the application configuration is incorrect. "
    Reinstalling the SAP server services does not solve the problem. Does anyone know how to fix this configuration?
    This server does not have any virus protection software running on it, so that is not the issue.
    Thanks in advance for your help.
    Mark

    Hi Muhamad,
    Possible Causes:
    License Manager: Dependencies of SAP Business One License Manager to the  TAO NT Naming Service, in some cases Firewall settings might prevent running the TAO NT Naming Service.
    RSP: Firewall might block TCP/IP and relevant port range when RSP agent is not included in the firewall policy list.
    Solution
    1. Check disabling the Firewall settings of relevant Virus scanner  software / Host Intruder prevention software (e.g. McAfee)
    2. Restart the TAO NT Naming Service & SAP Business One License Manager  / Restart the SAP Business One RSP Agent Service
    If the firewall is identified as the root cause, please review the firewall policy and settings.
    Thank you,
    Hari

  • "Windows could not start the offline files service on local computer. Error 3: The system cannot find the path specified"

    Using Windows 8.1 Pro on Toshiba Satellite i7 Laptop with 8Gb Ram
    After upgrade from Windows 8 Pro to 8.1 Pro, the Offline Files/CSC service refuses to start and gives the error message:
    "Windows could not start the offline files service on local computer. Error 3: The system cannot find the path specified"
    Before the upgrade, offline files worked fine... how do I re-enable offline files?

      I had a similar issue -  couldn't make any files available offline.
    I found that the offline folder service would not start
    This was because the CSC permission were totally screwed.  I had to take ownership of each folder and file, one by one, then grant everyone full access.
    then delete the full contents of the CSC folder
    format the CSC database using the registry fix then reboot
    in control panel, disable the offline files,  reboot, then re-enable.  and now its working :)
    2hrs to resolve this, with grateful thanks to this thread and some others.
    damn windows8

  • Windows could not start the DHCP Client service on Local Computer, Error 2

    Hi everyone,
    I assign IP addresses via my router but today installed OpenVPN and it depends on the DHCP Client service. I checked in services and found it wasn't running. If I try starting it I get this message "Windows could not start the DHCP Client
    service on Local Computer." "Error 2: The system cannot find the file specified.".
    There's plenty of info out there about this issue but nothing seems to fix it for me. I've tried the following as an administrator,
    "sfc /scannow" - It reported and error which it fixed but after a restart the problem persists.
    "NET  LOCALGROUP   administrators  "NT Authority\Local Service"   /add"
    "netsh winsock reset catalog"
    I also checked that all dependencies of the DHCP Client service are working. I used "CMD /K
    SC QC DHCP" to check the dependencies and compared them to an identical computer and they are. Hope someone can help. Thanks in advance.

    Hi,
    Did you mean after the restart the sfc /scannow command still could find the corrupted files?
    Have you check this these related registry entries permission for your account?
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Dhcp
    permission needed: Query value, Create value, Enumerate Subkeys, Notify, Read Control
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Dhcp\Configurations
    permission needed: Full Control, Read
    for more information, read this article:
    Some services do not start in Windows Vista and Windows 7
    https://support.microsoft.com/kb/943996?wa=wsignin1.0
    If the issue still cannot be resolved, I would like to suggest you use the recovery media to repair your computer.
    Karen Hu
    TechNet Community Support

  • I cannot start the Utility on a Win 7 service pack 1 machine

    I cannot start the Utility on a Win 7 service pack 1 machine

    hi HaoleBoy,
    Welcome to the Forums.
    I've worked with lenovo models that has an embedded Intel HD Graphics (these are units with core i3/i5/i7 CPU) but never ecountered a problem on them in installing Win7 SP1.
    If you have one of these units, can you try to:
    1. Update your Intel HD Graphics driver by running the Intel® Driver Update Utility (newest driver is v15.28.15.64.3062 (9.17.10.3062)
    2. Download and install the Windows 7 SP1 Standalone Installer (choose the windows6.1-KB976932-X64.exe 903.2 MB for Win7 64bit)
    Hope this helps
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

Maybe you are looking for