Windows CD does not run

I have Windows XP Service Pack 2, the full retail version (not a pirate copy) and after partitioning my drive I continued to install Windows.
Firstly, my Mac kept spitting out the disk, so I checked it - I found no scratches or other problems on the disk. After a few tries, it stayed in and the computer restarted to install Windows.
Then, after going through a couple of screens (accepting the licence, installing a couple of drivers or something) I was then told that the disk "either cannot be read or the version you are using is not a genuine Windows disk," or something along those lines.
This obviously makes no sense, because to get those first few screens and for it to install some drivers must mean it can detect the disk. So what is the problem?
I hope getting XP hasn't been a waste...

I have figured out the problem.
Windows XP comes in "full" and "upgrade" editions. It's not extremely clearly labeled on the packaging, but there is a little box that says something to the effect of "For PC users with Windows 98". Not being too familiar with Windows, I didn't realize they sold different versions, and had to return my Upgrade edition and buy the twice-as-expensive Full version.
It was really confusing because Boot Camp Assistant recognized the installation disk as a working version, but the Windows XP Setup program of course did not. Hope this helps you and anyone else who makes this mistake!

Similar Messages

Itunes 9.2 (64 bit) does not run

All of a sudden my iTunes 9.2 (64 bit) on Windows 7 does not run anymore. Repairing the setup did not help. Removing and re-installing the application helped only 1 time, after that the program again did not run anymore. And during that 1 run it did load my (big) library but could not find any of the songs!
Using Window's system restore (back 3 days) did not solve the problem either.
I had been using iTunes 9.2 for a few weeks without a problem. Why doesnt it suddenly not run anymore? What can I do? Thanks for helping!

No error message at all. No clue either.
A few times the program DID run - after around 20 mins waiting it suddenly appeared...
A few other strange things:
- After double clicking the iTunes icon something DOES start: the task manager shows the iTunes process, sometimes with up to 40-50% of the CPU capacity, sometimes with low memory usage, sometimes higher
- When trying to uninstall iTunes (completely) with Revo Uninstaller: the program does not appear in the REVOapplication list
- When trying to uninstall it through Control Panel I can uninstall it.
- I disabled my iTunes library, to be sure that the trouble has nothing to do with that. Maybe it could be too big (around 40 thousand songs!) or corrupt. But even without a library the startup is not possible - or incidentally taking 20 mins or more.
- I ran Advanced System Care to fix registry problems and defragmenting the systems files - no change.
What can be wrong? And more important: what can be done?

My new Dell PC running Windows 8 does not recognize my iPad or iPhone. Worked OK for iPhone for months but would not work for new iPad. I removed /relaoded iTunes and now it won't recognize either iPad or iPhone.

My new Dell PC running Windows 8 does not recognize my iPad or iPhone. Worked OK for iPhone for months but would not work for new iPad. I removed /relaoded iTunes and now it won't recognize either iPad or iPhone. Got any suggestions?

Hi there Lizabethfromaz,
You may find the troubleshooting steps in the article below helpful.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
-Griff W.

My Firefox version is 13.0.1, I use Windows Seven 64-bit, when I click on Firefox, but the program does not run! But Firefox is seen in the list of Windows proc

My Firefox version is 13.0.1, I use Windows Seven 64-bit, when I click on Firefox, but the program does not run! But Firefox is seen in the list of Windows processes, while Firefox does not run.
I manually deleted Firefox from the list once I have Windows processing.
And when I clicked on Firefox, Firefox will open quickly and easily.
Firefox process in Windows Processes names list called "firefox.exe * 32" is.
Please try to solve my problem, my problem is how to solve?

Hi, are you saying that you start Firefox and it stalls -- you can see it in the Task Manager but it never displays -- but if you kill that process and start Firefox again it starts up properly that second time?
If you look at the statistics available in the Task Manager's processes tab such as bytes read or other bytes, can you see whether Firefox is doing anything at all? ''Note: You might need to add columns if your Processes tab isn't set up to display statistics. You can do that from the View menu.''
You might already have seen these troubleshooting articles. If not, does anything here help:
* [[Firefox won't start - find solutions]]
* [[Firefox hangs or is not responding - How to fix]]

I m working in an organization where web-sense is installed to block all irrelevant sites, i have installed itunes but it does not run a window pops up with message 'itunes is not connected to the network' can anyone help me out?

i m working in an organization where web-sense is installed to block all irrelevant sites, i have installed itunes but it does not run a window pops up with message 'itunes is not connected to the network' can anyone help me out?

There's a whole lot to read in your post, and frankly I have not read it all.
Having said that, this troubleshooting guide should help:
http://support.apple.com/kb/TS1538
In particular, pay attention to the mobile device support sections near the bottom, assuming you have already done the items above it.

Windows update does not work after using System recovery disk

I have a Toshiba Satellite c655 with WIndows 7 64 bit Home premium. The hard drive died on it, so I purchased a new hard drive and purchased the appropriate Recovery media from Toshiba. I followed the directions and installed the 3 disks on to the new hard drive. But Windows update does not work I get the following error: Windows update can not currently check for updates, because the service is not running. You may need to restart your PC    No matter what I try, I can not get it to work. And it will not let me install Windows Defender either. Any ideas or help would be appreciated. Thank you in advance for your time on this matter.
Solved!
Go to Solution.

I get errors saying A problem is preventing the troubleshooter from starting.
That makes two similarities to the following thread. Both Windows Update and Troubleshooters fail to work correctly.
   Trouble with reinstall of Win7 64 on a L505-ES5018
The fix was to install a new hard disk driver.
   Intel Rapid Storage Technology
-Jerry

Why windows 8 does not recognize ipod touch model A1367 4th Generation?

Why window 8 does not recognize ipod touch model A1367 4th generation? and of course iTunes either.

See:
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
(it applies to win 8)
Run this to help if it identifies the cause
iTunes for Windows: Device Sync Tests
Have you tried on another computer to help determine if you have a computer or iPod problem?

Windows 7 does not recognize ipod 6th gen nano

Windows 7 does not recognize my device so I can't sync to iTunes. I tried running MSCONFIG, reinstalling iTunes and various different cables, usb ports. Any other suggestions?

Does the iPod appear in Device Manager when it is connected?
To access device manager, click Start and then right->click on Computer and choose Manage.
It might be listed as unknown or under the USB host controllers section.
B-rock

Premiere elements 12, new installation, serial no. accepted, installation completed and new started, but does not run. I get following msg-box: "LoadLibrary failed with error 126: Das angegebene Modul wurde nicht gefunden."

premiere elements 12, new installation, serial no. accepted, installation completed and new started, but does not run. I get following msg-box: "LoadLibrary failed with error 126: Das angegebene Modul wurde nicht gefunden." Installation in German Language on WIN7 professional 64bit, Samsung SSD. What can I do to run that program?

Jurgen Freund
Premiere Elements 12 on Window 7 64 bit. What video card/graphics card does your computer use - AMD Radeon?
I have found this YouTube video on the subject of Error 126 with details for resolving the problem.
How to fix the ERROR 126 when you open OpenGL programs - YouTube
The link was contributed in an old 2013 thread here by the ID danneomarre (see post 6 of the following thread)
LoadLibrary failed with error 126: cant find the required
Please let us know if that worked for you.
Thank you.
ATR
Add On...When all is OK and working, please update 12 to 12.1 Update using an opened project's Help Menu/Update.

Windows Vista does not see my Ipad but it always did prior to this attempt

Windows Vista does not see my Ipad, this is a new problem and I have not made any major changes to either my computer or to my Ipad. I am running Vista 64 as an operating system. I get the message that windows has an unrecognized USB device. I checked to see if the Apple Mobility software is running and it was, I reset it, turned off the computer, soft reset the Ipad but still no luck.

Hi,
Can you try a different USB port?
Check out this link just in case.
http://support.apple.com/kb/HT4049
Carolyn :-)

Windows 8 does not recognise Excite 10

Windows 8 does not recognise Excite 10. Before win7 done this without any problems, now win8 looking for drivers! can anybody advice me what to do

Hi,
Please download the following program and run it on your Windows 8 machine:
http://ftp.hp.com/pub/softlib/software12/COL44840/mp-109033-2/hppiw.exe
You need the printer on your home network.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Finder does not run properly after starting up [Mountain Lion]

I've installed MountainLion from Snow Leopard 10.6.8
My Mac is Macbook7,1 (Macbook White) Intel Core 2 Duo
When the installation finish, it seems like Finder does not run. I have to click on the Finder icon on the Dock to make it run.
And then I got some of problem after that
1. When I Click "About This Mac", nothings happen.
2. When I Click "Restart...", "Shutdown..." or "Sleep", nothings happen. So, I have to Shutdown or Restart my Macbook from "Login Window..." only.
3. Some of my settings in "System Preferences" do not be saved. Such as Trackpad settings (I can't "Tap to Click" in every time I start up my Macbook, I have to use physical click instead.) and Spotlight Hotkey settings (When I switch the Language, the Spotlight is popping up.)
I'm not sure what is the cause of these problem.
Could anyone help me please.
Thank You.

I forgot to mention (and add a new level of strangeness) that Mail is retreiving all of my messages from my personal (AT&T) account without issue.
And I just discovered an even bigger problem: all of my emails from my Sent and other folders from my work account are completely gone!
I may have no choice but to revert to my Lion system as of yesteday, before I installed ML.

OS X Mavericks 10.9.3 Does Not Run Smoothly

Hi,
I just upgraded my iMac and MBP from the Mac OS X ML 10.8.5 to the latest OS X Mavericks 10.9.3.
The new system does not run smoothly.
No matter it's the iMac or the MBP, the screen freezes for a very short of time whenever I try to switch to a different running program(especially when I try to switch to other programs from the Safari).
So what's causing the problem? What should I do about it?
Thanks.
Ed

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.

Windows 7 does not like my Audigy Card at all

Hey guys,
Got too excited and went out and bought Windows 7 Ultimate x64 - fantastic. Problem is, I have no sound - my Asus Rampage Formula motherboard has no onboard sound as it comes with a seperate sound card which won't work and neither will the cheapy Audigy standard one I bought today to try...
7 automatically installs some drivers when it detects I have a sound card installed and sticks it in the Device Manager under 'System Devices' and calls it a 'High Definition Audio Controller'
Now I found the new Win 7 drivers on here and downloaded in the hope of installing and overwriting this 'Hi Def Audio Controller' but when i'm in setup I get the error message "Setup is unable to detect a supported product on your system. Please ensure that your product is properly installed before running this Setup Program. Setup will exit" which is completely baffling me as Win7 can detect and install this 'audio controller' - when I hover over the volume icon in the taskbar (which incidentally has a red cross over it) it says 'No audio output is installed"
I'm probably going wrong somewhere, but I don't know if its Win7 or these "Windows 7" drivers don't actually work?
Please can anyone help?!!

Re: Windows 7 does not like my Audigy Card at all^ Perhaps you can try this:
<a rel="nofollow" href="http://support.creative.com/downloads/download.aspx?nDownloadId=0960"]http://support.creative.com/downloads/download.aspx?nDownloadId=0960[/url]
Yes I know that that is a standard driver from Creative. But try to download the driver. Then right click it, and extract it. You can extract it like this if you have WINRAR, WINACE, or WINZIP on your system. Even the free 7-zip will work great.
Then go to device manager, and then to your unknown device, and then update driver, and then choose "have disk....." and browse to the folder where you unzipped the driver. Then install the driver, allowing it to copy the files over to your system. Reboot. Sound may still not be working at this point. Then try windows update or the Daniel K. pack again. Using this method may seem weird but I am trying to "trick" your system into picking up your Audigy.
This worked for me before with my x-fi Titanim and my Extreme gamer when I switched to Vista 64.

Error 'window SRID does not match layer SRID' despite using Index MBR

Hey!
I'm trying to run the following query:
SELECT count(*)
FROM mytable
WHERE SDO_FILTER(geom, (SELECT sdo_root_mbr FROM user_sdo_index_metadata WHERE sdo_index_name='IDX_GEOM_MYTABLE') ,'querytype = WINDOW') = 'TRUE';
The index I'm querying in the Subquery is the geometry index for mytable.geom, i.e. I'm doing a spatial query on IDX_GEOM_MYTABLE with it's own geometry index'es MBR. And I get this:
"window SRID does not match layer SRID"
How can that happen?
Regards,
Christian

John's right. If I see correctly what you're trying to do you could also do this:
SELECT count(*)
FROM mytable
WHERE SDO_FILTER(geom, SDO_TUNE.EXTENT_OF(mytable,my_SDO_column) ,'querytype = WINDOW') = 'TRUE';
If the Index was built correctly and is not partitioned this should give you the same result.

Windows CD does not run

Similar Messages

Maybe you are looking for