Windows CE 6.0 BSP for Virtual PC

I am looking for a Windows CE 6.0 BSP for Virtual PC. Many sites in the internet, such as the following Windows Embedded Blog entry comment there is such a BSP available:
http://blogs.msdn.com/b/mikehall/archive/2009/05/21/download-windows-embedded-ce-6-0-virtual-pc-binary-bsp.aspx#comments
The link they offer to download the BSP is the following one:
http://archive.msdn.microsoft.com/CE6VirtualPCBSP
However, the link does not work and the content is unreachable.
Does anybody know where to find the BSP I am looking for?
Thank you in advance.

When you install WinCE platform builder and select x86 as one of the CPU
The BSP for x86 gets installed "CEPC"
For details refer :
http://msdn.microsoft.com/en-us/library/ms905319.aspx
--- Misbah
Senior Design Engineer T.E.S Electroni Solutions (Bangalore-India) www.tes-dst.com [email protected]

Similar Messages

Can I install Linux and then use the original Windows 8 OEM product key for a virtual machine on the same computer?

I have ordered a new laptop and expect to receive it in 2-3 weeks. The laptop comes with an OEM version of Windows 8 installed. I wish
to install Linux as the host operating system and create a virtual machine running Windows 8. Can I legally use the product key from the OEM installation to activate a virtual machine that will only be used on the laptop that had the original OEM installation?
If so, what is the procedure to activate the copy installed on the virtual machine?
This question has been addressed for Windows 7, but my searches did not reveal this question posed for Windows 8.

Technically, no. The OEM is licensed only for the physical hardware on the system. It isn't licensed for virtual hardware.
You may find you're unable to activate your OEM license in the VM. A lot of OEM Windows look for specific hardware to verify they're being installed on the correct hardware.
Although here: http://www.microsoft.com/oem/en/Pages/support-faq.aspx#fbid=Zh0SiBdas5I
Q. Can I install OEM on a virtual machine (VMware)?
A. You may install OEM in a virtual environment as long as you have a separate license for each instance of the software. It is fine to use the OEM version as long as it is properly licensed. To be clear, a separate version of software must be installed
for both the “standard” and “virtual” installations.
You still may not be able to activate if there is a hardware block.
The best place to ask this is to Microsoft licensing, any response you get here, including mine, won't hold up since it's not an official answer.
Q. Can I install OEM on a virtual machine (VMware)?
A. You may install OEM in a virtual environment as long as you have a separate license for each instance of the software. It is fine to use the OEM version
as long as it is properly licensed. To be clear, a separate version of software must be installed for both the “standard” and “virtual” installations.
edit: removed the duplicate Q&A

(Request for:) Best practices for setting up a new Windows Server 2012 r2 Hyper-V Virtualized AD DC

Could you please share your best practices for setting up a new Windows Server 2012 r2 Hyper-V Virtualized AD DC, that will be running on a new WinSrv 2012 r2 host server. (This
will be for a brand new network setup, new forest, domain, etc.)
Specifically, your best practices regarding:
the sizing of non virtual and virtual volumes/partitions/drives,
the use of sysvol, logs, & data volumes/drives on hosts & guests,
RAID levels for the host and the guest(s),
IDE vs SCSI and drivers both non virtual and virtual and the booting there of,
disk caching settings on both host and guests.
Thanks so much for any information you can share.

A bit of non essential additional info:
We are small to midrange school district who, after close to 20 years on Novell networks, have decided to design and create a new Microsoft network and migrate all of our data and services
over to the new infrastructure . We are planning on rolling out 2012 r2 servers with as much Hyper-v virtualization as possible.
During the last few weeks we have been able to find most of the information we need to undergo this project, and most of the information was pretty solid with little ambiguity, except for
information regarding virtualizing the DCs, which as been a bit inconsistent.
Yes, we have read all the documents that most of these posts tend point to, but found some, if not most are still are referring to performing this under Srvr 2008 r2, and haven’t really
seen all that much on Srvr2012 r2.
We have read these and others:
Introduction to Active Directory Domain Services (AD DS) Virtualization (Level 100),
Virtualized Domain Controller Technical Reference (Level 300),
Virtualized Domain Controller Cloning Test Guidance for Application Vendors,
Support for using Hyper-V Replica for virtualized domain controllers.
Again, thanks for any information, best practices, cookie cutter or otherwise that you can share.
Chas.

There is no more space for virtual disk ServerName_2.vmdk. You might be able to continue this session by freeing disk space on the relevant volume, and clicking Retry. Click Cancel to terminate this session.   Time: 30/05/2014 1:16:20 AM

Recently, our mail server crashed at about 7pm one night, with the error 'There is no more space for virtual disk ServerName_2.vmdk. You might be able to continue this session by freeing disk space on the relevant volume, and clicking Retry. Click Cancel to terminate this session.'
When we click Retry, the server starts up OK.
There are no snapshots listed in Snapshot manager for any of the virtual machines on the host.
There is also free disk space available on the host and for the VM with the disk errors.
This happened at least three more times, often at bad times. Each time, we were able to click 'Retry' and the disk/system would allow the VM to start-up successfully.
I checked the Forums, the VMware support articles and the internet as I had not seen this problem before. I have completed the VSphere 5.1 - Fast Track course and this issue was NOT covered in the training.
Most of the advice on-line and even that on the VMware web-site was pointing to snapshots being the cause of this issue. There are no snapshots enabled and I cannot see evidence of snapshots ever being used.
- We are running VMware vsphere (5.1.0) and there are (were) 4 virtual machines running on the ESX host. We are using the free version of VMware/ESXi.
- The Hard disk types we are using for this Virtual Machine are 'Thin Provisioned'.
- There are 4 [Thin Provisioned] Hard Disks for this virtual machine.
- There are 6 CPUs
- There is 20GB of RAM (memory)
- The VM is running Windows Server 2008 R2 as the guest/VM operating system. It is an Exchange 2010 SP1 mail server. There is plenty of available disk space on all the drives. The [Exchange] log files are cleaned out regularly (automated).
I decided to move one of our non-critical servers off this host and on to another host to see if this helped the problem. This took quite some time, as we are not using HA or vmotion, nor do we have VCenter Server...nonetheless, I finally managed to get the non-critical server on to another host (n.b. This was a much smaller machine with less virtual resources assigned to it).
After moving the non-critical server off this host, we decided to monitor the Host and see if the issue resolved itself.
I checked the host about 6-10 times a day, from first thing in the morning till last thing at night - monitoring the performance of not only the Virtual Machine, but the ESXi host also.
There were no adverse performance issues. The only thing I did note, was in the Summary page on the ESX Host, under Storage, was If I right-clicked on the datastore and clicked refresh, then the free disk space would drop (ie from 140GB to 125GB).
After monitoring the host and VM for about 2 weeks, we did NOT have another instance of the above error.
Sorry for the long winded post, but I wanted to give as much detail given this error has been raised before and snapshots are usually blamed as the cause.
My question is this:
If the ESX host had plenty of available disk capacity and there were no snapshots enabled on the VM (or any other VM's on the same host), then why did our Virtual machine crash with the error that 'there is not more space for virtual disk Servername_2.vmdk'?
How do we prevent this issue from happening if we don't know the underlying cause?
I would greatly appreciate any advice or suggestions.
If I have not provided enough info on the specs or environment, please let me know and I will provide more information.
Thanks all,
Kurt

The type of storage is really based on your requirements, and your ability to withstand downtime.
iSCSI as you are using with a NAS such as Synology or QNAP. NAS Selector - Support - Synology - Network Attached Storage (NAS)
I wouldn't use iSCSI for Exchange or any database. It's a bit slow.
Do you have a single physical host? Then I'd probably to an external direct attached storage. This would be a card inserted in your host server that gives you multilane SAS/SATA connectivity (www.techcable.com/SAS-SATA/SAS-SATA.pps) and an external disk enclosure/array.
For multiple hosts to a single array, I recommend a fibre channel connection to a FC capable switch, and on to a FC connected array.
We used to use a HP P2000 (on old G1), but it's since been retired. Worked pretty well once firmware was upgraded. http://www8.hp.com/us/en/products/disk-storage/product-detail.html?oid=4118559#!tab=features. They can be connected via iSCSI, Fibre Channel or 6GB SAS so they are flexible and reasonably priced.
Recommendations:
     Use RAID 6 with your large disk arrays. With large disks there is a measurable failure rate when rebuilding a failed RAID5 array based on MTBF.
     Use smaller 15K disks in RAID 0+1 for speed on databases/Exchange.
     Use slower 7.2K disks in RAID6 for file storage.
We are a small hospital and we have 3 VMware servers with dual CNA (FC and Ethernet in a single twinax cable) connections to 2 redundant Cisco Nexus 5K switches and then 4 Fibre Channel connections to an EMC VNX 5300. It's extremely fast with about 50 virtual servers, but was quite an investment. One thing we don't have to worry about is down time. If there ever is an equipment failure, we have redundant everything, including power split between two UPSs.
Our VNX has 3 tiers of performance. 3 100GB SSD "Fast Cache" in RAID 1 with hot spare, to keep the most used data ready, but it's not really a tier, however one could be built utilizing the same disks. A second tier is performance tier with a 8 600GB RAID 0+1 and hot spare. The third is a bunch of 7.2K 3TB disks in RAID6. The VNX autotiers, placing data on disks depending on where it's needed. The volumes are sliced and diced automatically in the background to make this happen and we never have to touch it. I used a demo of Solarwinds Storage Manager to monitor performance for a while and the utilization was always low, meaning all data access was fast, througout the day.
D

Disable Driver Enforcement for Virtual Audio Cable?

Hi, I'm trying to get this thing called "Virtual Audio Cable" Working, but It is apparently not signed, so I cant even use it. Is there a fix to this? I've tried to use bcdedit -set. I have tried to use DSEO Too, but I dont know what file it wants
me to sign, so I'm confused. So if anyone has any idea what to do with this, it will be very helpful.
(PS, Not really the best with computers. But if you guide me through what you want me to do. It'll be easy.)

Hi,
Do you mean that you're unable to install the unsigned driver for Virtual Audio Cable? If so, you can choose “Disable Driver Signature Enforcement” during boot, this allows unsigned drivers to load for this boot only.
You can refer to workarounds mentioned in blog below
How to install unsigned drivers
http://blogs.msdn.com/b/matthew_van_eerde/archive/2014/04/05/10211068.aspx
And there's a security policy to configure the Unsigned driver installation behavior in previous Windows versions, but removed since Vista
Computer Configuration\Windows Settings\Security Settings\Local Policies\Security Options\Devices: Unsigned driver installation behavior
while you can refer to this KB to re-add this policy option, this KB is for Windows Vista, but I have tested in my Windows 7 enterprise, it also works.
http://support2.microsoft.com/?kbid=947250
Add: as Rick mentioned, Eugene Muzychenko should be more familiar with this product
Yolanda Zhu
TechNet Community Support

Add font for virtualized Office 2013

Hi,
I need to add a font for Office 2013.
Usually, a font should be added to Windows\Fonts. I believe it should work for virtual Apps too?
Can we do it on package level?
Thanks.
--- When you hit a wrong note its the next note that makes it good or bad. --- Miles Davis

Generally you can add fonts to app-v packages.
Tim Mangan did some research on the pulishing performance of that and also documents some background information: http://www.tmurgent.com/appv/index.php/resources/research/293-deploymentperformance
However: As the Office 2013 App-V package can't be modified with the Sequencer, you'd have to find other methods. One would be to copy/install the Font inside the virtual package using a DeploymentConfig, or you install the Font locally - maybe also using
the DeploymentConfig.
Falko
Twitter
@kirk_tn   |   Blog
kirxblog   |   Web
kirx.org   |   Fireside
appvbook.com

Best practice steps for virtual server

Hello,
I need help in below questions. Please help.
Q1) What are the best practice steps to create a VM with Hyper-V?
Q2) What is the best practice for virtual network cluster?
Q3) What are the domain controllers? and how to upgrade it from 2003 domain to 2012 domain?
Please help me to answer above questions. I am new to networking server side. Please guide me step by step. Any help is much appreciated.
Thanks.
chirag

Please post your questions in the appropriate forums.
This forum is for the specific product Virtual Server 2005.
For Hyper-V related questions, use the Hyper-V forum:
http://social.technet.microsoft.com/Forums/windowsserver/en-US/home?forum=winserverhyperv
For server questions please use the server forums:
http://social.technet.microsoft.com/Forums/windowsserver/en-us/home?category=windowsserver
Microsoft has a lot of documentation, have you read it yet? Googled?
Clustering:
http://social.technet.microsoft.com/Forums/windowsserver/en-US/7173caf4-a5aa-4426-a16b-592a6e6714ec/windows-server-2012-hyperv-cluster-step-by-step?forum=winserverhyperv
http://www.bing.com/search?q=hyper-v+cluster+2012+r2+step+by+step&src=IE-SearchBox&FORM=IE11SR
Domain upgrades:
http://technet.microsoft.com/en-us/library/hh994618.aspx

What Windows 7 version is used for Hyper-V vdi?

Hi,
what Windows 7 version is used for Hyper-V pooled and static vdi?
Don't think that using FULL W7 OS is practical in both scenarios.
What would be the best choice?
Thanks
--- When you hit a wrong note its the next note that makes it good or bad. --- Miles Davis

Hi Sir,
Please refer to following blog regarding windows 7 sp1 virtual desktop :
http://blogs.msdn.com/b/rds/archive/2012/10/09/remote-desktop-protocol-8-0-update-for-windows-7-sp1-enabling-a-great-wan-user-experience-for-windows-7-sp1-virtual-desktops.aspx
Also :
http://blogs.msdn.com/b/rds/archive/2012/10/29/single-image-management-for-virtual-desktop-collections-in-windows-server-2012.aspx
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

Increase disk size for virtual server

Hi,
A virtual server system drive is currently at 90%full. How to safely allocate more disk space to the system drive of that virtual server without causing issues to the installed Operating systems on that drive.
I read through the Virtual Iron documentation and nothing mention about increasing disk space for virtual server.
Thanks in advance for response.

Hi,
I was hoping to increase the virtual storage of the drive attached to virtual servers and not the actually physical storage.
I was looking around in it and found was able to increase the disk space by by editing the virtual storage disk.
I tested creating a new disk (5GB), increase the disk space(10GB) and login to virtual server and extend the new disk with the unallocated disk space.
It does seem to work and appear as 15GB.
I just concern if windows operating is installed on that disk, will it cause any issue if I extend it with the unallocated disk space?
Or it's safe to do so?
Many thanks.

VDA licensing for Virtual Desktops

Hi,
I always seem to browse thru the VDA Faq everytime I need to do up a proposal for a Desktop Virtualization solution. Can anyone clarify some things that are vague for me right now.
1) If current environment all users use OEM machines with Windows XP, say VDI is rolled out using Windows 7. We know we would need to get the VDA license per device that is about to access the Virtual Desktops. But how about the Windows 7 Base
OS license itself? Is there a need to buy 1 Volume License Windows 7 media when preparing the master image using that OS?
2) How does the VDA usage rights extend when the users primary using it, goes home and uses their own home PCs to connect back to their virtual desktops? Do we need to get another VDA license for that use?
Thanks,

Hi,
Please check the following link:
Licensing Windows
for Virtual Desktops Whitepaper
Licensing Windows for VDI Environments
Hope it helps.
Alex Zhao
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Configuring default web apps for virtual hosts

Hi,
This posting is meant save time for anyone trying to specify a default web app
for each of their virtual hosts (as opposed to specifying a default web app for
each of their wl servers). This applies to weblogic 6.1, on NT. (I haven't tried
this on other platforms).
If you are trying to use the admin console to do this, give up. It's not possible.
The "Virtual Host/Configuration" window lets you specify everything about that
vhost configuration EXCEPT a default web app. (The "Default Web Application" drop
down menu will always have only one option to choose from: "none").
Instead, shutdown your server, and edit your domain's config.xml file manually.
Attached is an example config file that specifies that the web app "kz" should
be the default web app for the vhost "wl.kz.com", and that the web app "kahuna"
should be the default web app for the vhost "www.kahuna.com".
Hope this helps,
Brian O'Donnell
Lead Developer, Learning Network
[config.xml]

Hi,
Is it possible to configure default web appls for virtual hosts
with Weblogic 6.0 on NT platform? I tried to configure the configure.xml as Brian
did, it doesnot work. I am just wondering if there's any other possible way to
do this.
Thanks.
Mei
"Brian O'Donnell" <[email protected]> wrote:
>
>
>
Hi,
This posting is meant save time for anyone trying to specify a default
web app
for each of their virtual hosts (as opposed to specifying a default web
app for
each of their wl servers). This applies to weblogic 6.1, on NT. (I haven't
tried
this on other platforms).
If you are trying to use the admin console to do this, give up. It's
not possible.
The "Virtual Host/Configuration" window lets you specify everything about
that
vhost configuration EXCEPT a default web app. (The "Default Web Application"
drop
down menu will always have only one option to choose from: "none").
Instead, shutdown your server, and edit your domain's config.xml file
manually.
Attached is an example config file that specifies that the web app "kz"
should
be the default web app for the vhost "wl.kz.com", and that the web app
"kahuna"
should be the default web app for the vhost "www.kahuna.com".
Hope this helps,
Brian O'Donnell
Lead Developer, Learning Network

Vista asks for Virtual Truck Program

Please please please can someone help me......! I have got Vista and every time I log on it asks me to insert CD for virtual truck program. I believe it is something to do with an incorrect installation of my virgin media broadband but I can' find this program (or anything related to it on the start up program (if that it even the right place to look).
Is there anyone who can point me in the right direction, as I obviously have no clue as to what I'm doing!! x

In my opinion there must be a virtual truck program entry which tries to start this application every time after the booting.
Think you need to edit your msconfig and remove the entry for it.
Furthermore check two places on the HDD;
- Start up folder delete Vtruck from there.
- HDD ->windows -> program files -> temp folder -> delete a file. There are maybe two called recover from reboot.exe
Good luck

Hyper-V could not replicate changes for virtual machine 'machinename': The connection with the server was terminated abnormally (0x00002EFE).

I have a 3 node cluster that has replica setup to replicate to another cluster off-site.
Suddenly one of the servers is not replicating with the error:
Hyper-V could not replicate changes for virtual machine 'machinename': The connection with the server was terminated abnormally (0x00002EFE). (Virtual Machine ID CC0FD4CC-F9B7-4C68-ABE8-B7D52A87899F)
All other servers are replicating fine so there cannot be a permissions or connectivity issue between the 2 clusters.
This server has 2TB of data so I'd rather not have to start the replication again.
Does anyone have any pointers?
Thanks.

Hi drensta,
Based on my knowledge , "hyper-v replica broker " is needed for failover cluster replica .
Here is a link for "Why is the "Hyper-V Replica Broker" required?"
http://blogs.technet.com/b/virtualization/archive/2012/03/27/why-is-the-quot-hyper-v-replica-broker-quot-required.aspx
Hope this hleps
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Crashes when running applications from network share - "Windows cannot access the file for one of the following reasons"

Hi,
starting a couple of weeks ago, we get the following error(s) when running applications from a network share. We don't know what causes this, we are not aware of any major changes in our network infrastructure or client/Server configuration. We did upgrade
a lot of machines to Windows 8, but the issue also occurs on older Win7 computers.
We figured out a workaround though: The applications run fine when launching from a FQDN share (like
\\share.domain.Company.com) and only cause problems when running from
\\share directly. They have worked fine for years without FQDN though.
Any ideas?
Error Details (the Kind of error differs greatly):
# 1 #
Log Name: Application
Source: Application Error
Date: ...
Event ID: 1005
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: vmDEV
Description:
Windows cannot access the file for one of the following reasons: there is a problem with the network connection, the disk that the file is stored on, or the storage drivers installed on this computer; or the disk is missing. Windows closed the program XYZ
because of this error.
Program: XYZ
File:
The error value is listed in the Additional Data section.
User Action
1. Open the file again. This situation might be a temporary problem that corrects itself when the program runs again.
2. If the file still cannot be accessed and
- It is on the network, your network administrator should verify that there is not a problem with the network and that the server can be contacted.
- It is on a removable disk, for example, a floppy disk or CD-ROM, verify that the disk is fully inserted into the computer.
3. Check and repair the file system by running CHKDSK. To run CHKDSK, click Start, click Run, type CMD, and then click OK. At the command prompt, type CHKDSK /F, and then press ENTER.
4. If the problem persists, restore the file from a backup copy.
5. Determine whether other files on the same disk can be opened. If not, the disk might be damaged. If it is a hard disk, contact your administrator or computer hardware vendor for further assistance.
Additional data
Error value: C000020C [ also seen with code C00000C4]
#2 (German error Messages from now on, we only use German OSes, the above english one is translated based on similar error Messages I found on the web) #
Name der fehlerhaften Anwendung: XYZ.exe, Version: 2015.0.496.5054, Zeitstempel: 0x54ea67c3
Name des fehlerhaften Moduls: clr.dll, Version: 4.0.30319.34014, Zeitstempel: 0x52e0b784
Ausnahmecode: 0xc0000006
Fehleroffset: 0x00026549
ID des fehlerhaften Prozesses: 0x13ac
Startzeit der fehlerhaften Anwendung: 0x01d055a854d36445
Pfad der fehlerhaften Anwendung: \\share\application.exe
Pfad des fehlerhaften Moduls: C:\Windows\Microsoft.NET\Framework\v4.0.30319\clr.dll
Berichtskennung: 949ea933-c19b-11e4-bf04-78542e186754
Vollständiger Name des fehlerhaften Pakets:
Anwendungs-ID, die relativ zum fehlerhaften Paket ist:
Anwendung: XYZ.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: Ausnahmecode c0000006, Ausnahmeadresse 720B6549
Stapel:
# 3 #
Anwendung: WpfApp.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: System.Runtime.InteropServices.SEHException
Stapel:
   bei SP.Forms.AutoCompleteSelectionBase.OnEnter(System.EventArgs)
   bei System.Windows.Forms.Control.NotifyEnter()
   bei System.Windows.Forms.ContainerControl.UpdateFocusedControl()
# 4 #
Anwendung: WpfApp.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: System.Runtime.InteropServices.SEHException
Stapel:
   bei System.IO.UnmanagedMemoryStream.ReadByte()
   bei System.IO.BinaryReader.ReadByte()
   bei System.IO.BinaryReader.Read7BitEncodedInt()
   bei System.Resources.ResourceReader._LoadObjectV2(Int32, System.Resources.ResourceTypeCode ByRef)
   bei System.Resources.ResourceReader.LoadObjectV2(Int32, System.Resources.ResourceTypeCode ByRef)
   bei System.Resources.ResourceReader.LoadObject(Int32, System.Resources.ResourceTypeCode ByRef)
   bei System.Resources.RuntimeResourceSet.GetObject(System.String, Boolean, Boolean)
   bei System.Resources.RuntimeResourceSet.GetObject(System.String, Boolean)
   bei System.Resources.ResourceManager.GetObject(System.String, System.Globalization.CultureInfo, Boolean)
   bei System.Resources.ResourceManager.GetStream(System.String, System.Globalization.CultureInfo)
# 5 #
Anwendung: WpfApp.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: System.Runtime.InteropServices.SEHException
Stapel:
   bei System.Reflection.RuntimeParameterInfo.get_Name()
   bei System.Diagnostics.StackTrace.ToString(TraceFormat)
   bei System.Environment.GetStackTrace(System.Exception, Boolean)
   bei System.Exception.GetStackTrace(Boolean)
   bei System.Exception.ToString(Boolean, Boolean)
   bei System.Exception.ToString(Boolean, Boolean)
   bei System.Exception.ToString(Boolean, Boolean)
   bei System.Exception.ToString()
# 6 #
Name der fehlerhaften Anwendung: XYZ.exe, Version: 2015.0.496.5054, Zeitstempel: 0x54ea834f
Name des fehlerhaften Moduls: KERNELBASE.dll, Version: 6.3.9600.17278, Zeitstempel: 0x53eeb460
Ausnahmecode: 0xe0434352
Fehleroffset: 0x00012f71
ID des fehlerhaften Prozesses: 0xa68
Startzeit der fehlerhaften Anwendung: 0x01d0559cb7ec4ed6
Pfad der fehlerhaften Anwendung: \\share\XYZ.exe
Pfad des fehlerhaften Moduls: C:\WINDOWS\SYSTEM32\KERNELBASE.dll
Berichtskennung: 010514d0-c190-11e4-bf04-78542e186754
Vollständiger Name des fehlerhaften Pakets:
Anwendungs-ID, die relativ zum fehlerhaften Paket ist:
# 7 #
Name der fehlerhaften Anwendung: XYZ.exe, Version: 2015.0.496.5054, Zeitstempel: 0x54ea7a6e
Name des fehlerhaften Moduls: ntdll.dll, Version: 6.3.9600.17630, Zeitstempel: 0x54b0d74f
Ausnahmecode: 0xc0000006
Fehleroffset: 0x0006db27
ID des fehlerhaften Prozesses: 0x18dc
Startzeit der fehlerhaften Anwendung: 0x01d0559cb08529c3
Pfad der fehlerhaften Anwendung: \\share\xyz.exe
Pfad des fehlerhaften Moduls: C:\WINDOWS\SYSTEM32\ntdll.dll
Berichtskennung: ef389186-c18f-11e4-bf04-78542e186754
Vollständiger Name des fehlerhaften Pakets:
Anwendungs-ID, die relativ zum fehlerhaften Paket ist:

Hi,
>>The applications run fine when launching from a FQDN share
It sounds like a DNS suffix issue. When this issue occurs, please try to ping share on the client, then check if the corresponding IP address is correct. If the IP address is wrong, please adjust your settings of DNS to make sure that the client can resolve
the share correctly.
If it's very hard to change the settings of the DNS for some reason, as a work around, we can add the entry into the clients' hosts file.
Best Regards.
Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Set up reverse DNS for virtual mail hosting

I need a bit of server configuation advice.
I have a static IP and two public domains on a Snow Leopard server connected using NAT behind a firewall - with the necessary port forwarding to ensure all works.
1. abc.com is my primary domain on the server - server.abc.com
2. I have xyz.com set up as a virtual domain and also as a virtual mail host
This setup has worked well for a long time but I have found that emails to [email protected] are going missing. If I check my mx records using one of the web based tools it show an error on the reverse dns for server.xyz.com showing a reverse DNS of server.abc.com.
So the question - is it possible to have secondary 'virtual' DNS record on the server so reverse DNS works for the virtual mail host xyz.com? If not how do I handle the reverse DNS problem which i think is causing some external mail server to reject mail due to the inconsistency on the reverse DNS lookup?
Many thanks for any suggestions

SMTP requires a DNS A record.
A DNS A record is also known as a machine record.
A DNS A record inherently means that forward DNS and reverse DNS will match.
The forward translation translates the host name to the IP address.
The reverse translation translates the IP address to host name.
When the full translation produces the same host name, that's an A record.
DNS CNAME records are aliases, and are used for virtual hosts.
CNAME records inherently do not match the reverse DNS translations.
To get your configuration to work, your server must have an A record.
That means forward and reverse DNS will match.
Any of the virtual hosts within your mail server then all use an MX pointing at the A record host.
If you have your DNS hosted somewhere other than your ISP, then you'll need your ISP to set up a DNS PTR.
The DNS PTR is the reverse translation; address to name.
If you have your own DNS services within your network (as would be typical with a privately-addressed NAT'd network), set that up as a virtual host within SMTP.
Here is some related reading on external (public) DNS, as related to SMTP servers and such.

Windows CE 6.0 BSP for Virtual PC

Similar Messages

Maybe you are looking for