Windows Central Instance ABAP+JAVA plus UNIX ABAP dialog instances ?

Hi everybody,
we are an SAP software partner and provide SAP complementary software on UNIX and Windows platforms.
Part of our software (a gateway) needs to be installed on the SAP application server.
In order to setup a cross-platform test environment for our developers, I was thinking about extending the existing SAP ERP 6.0 Windows-based Central Instance (IDES, Oracle, usage types ABAP+JAVA) by multiple ABAP dialog instances which run on different UNIX flavours (Solaris, AIX, Linux).
I searched the SAP Notes and found nothing which could confirm my plans, as this is quite an unusual setup and heterogenous systems are usually the other way round (CI on UNIX, DI on Windows).
SAP Note 1067221 however mentions that DIs on different OS platforms are only partly supported, but it seems this is only valid for JAVA DIs?
As I need only ABAP DIs, I hope my plans are fine?
Many thanks for your feedback
Markus

> I searched the SAP Notes and found nothing which could confirm my plans, as this is quite an unusual setup and heterogenous systems are usually the other way round (CI on UNIX, DI on Windows).
Well - what is "usual" depends on the requirements
It's possible to do that. Technically there's no difference whether an application server is Unix or Windows based.
There are, however, a few things to take care of:
- if your system is non-Unicode, sorting algorithms are different on different platforms. Unicode systems use ICU which is cross-platform
- if you want to automatically distribute your kernel on system start you will need to create a "share" on the Windows machine and make it accessible from the various other platforms. You can, however, ensure "manually", that you use the same kernel patchlevels on all systems, then this is not needed
- Windows is LittleEndian whereas most Unix systems are BigEndian, depending on if you exchange data between those systems (means, binary data, files through NFS) the programs must be aware of the fact, that a file can be either LE or BE.
Markus

Similar Messages

ADS in the Java stack of a Dialog instance on Windows + CI on iSeries

Hi,
I read the document "Using Adobe Document Services with SAP on IBM DB2 for i5/OS".
Summary of the document -
There are two possible technical scenarios:
1. ADS in the Java stack of a Dialog instance on Windows
1.1. ABAP+Java dialog instance on Windows
1.2. Java dialog instance on Windows
2. ADS in a SAP system on a supported platform
2.1. ABAP+Java central instance on Windows/Unix
2.2. Java central instance on Windows/Unix
The document recomammeds technical scenario 1, that is, install a Windows Dialog instance.
Choosing an ABAP+Java or Java system depends on the usage scenario for Interactive Forms:
- Interactive PDF use: Java mandatory, ABAP+Java possible
- Interactive use in SAP Maanger Self_Services/batching of forms:
ABAP+Java mandatory but Note 993612 describes the status for NW04s SP12 onwards.
End of summary -
Our prefered rechnical scenario is: "1.2. Java dialog instance on Windows" to minimice resources.
Our usage scenario for Interactive Forms includes "SAP Manager Self- Services".
Our interpretation of note 993612 is that we do not need double stack installation. Could you confirnm this ?.
If yes, we are going to install a Java Dialog instance on Windows connected to our Java Central instance on iSeries (our SAP Portal system) to use ADS.
Best regards.

Hello Torrell,
your statements sound reasonable, also including SAP Note 993612.
To decide, though, whether a single stack would be enough (especially based on the aforementioned note), you will need the advise of an ADS application expert (or someone else who has implemented your scenario, independent of the platform).
I thus assume that you will not get an answer in this forum. Your question is ADS application specific.
When you know for sure that a single stack will be enough, your approach to use a Windows dialog instance will be fine.
Best regards, Barbara

Abap+ java stack or Abap stack

Hi All,
How to know whether a system is ABAP+ JAVA stack or JAVA stack.
In our system EP6.0 which is JAVA stack holds JC00 which is a java instance direcory. In BW system we have SCS20 and Dvebg...00 directories is it ABAP+ JAVA stack or ABAP stack with J2ee engine services.
Please suggest me...
Thanks,
Subhash.G

In the forder structuer usr\sap\<SID> if you have DVEBMGS<XX> then it's ABAP and if it's JC<XX>, then it's JAVA. Also if under DVEBMGS<XX> you have j2ee and SDM folder then it's a dual stack that is both ABAP and JAVA.
As for the URL if it's a dual stack then using the browser use the user j2ee_admin and the specified password, else if it is only java then use administrator user and the specified password.
If it's a dual stack you can also login using sapgui.
If in case its single stack AS_ABAP
THere will one be a single node i.e. no message server and enque server. The folder stur would be /usr./sap/<SID>/ and tou would find
DVEBMG SYS folders only.
IF in case its single stack Java server then
In mmc. you will find, 2 nodes one for message server, enque server and the other for the SDM, dispatcher and server0
the foder struct would be
/usr/sap/<SID?
JC><CIno> SCS<no>
Now in case if you have double stack i.e. AS-java and AS-ABAP you would will find these things in mmc
Message server and enque server
disp+work, message server and wp
the folder struct would be
/usr/sap/<SID>/
DVEBMG<no> SCS<no>

Web Dispatcher configuration (ABAP+Java vs. ABAP+Portal)

We are using an internal Web Dispatcher to allow the connections from different networks.
This Webdispatcher entry we add to WAS configuration within Portal system object
By defintion of ABAP+Java double stack we do not have any problems and the test
http://webpispatcher:port/sap/bc/ping is successful.
When we have a ABAP system + Portal (Java) we only can test the connection
http://webpispatcher:port/
When we execute the test
http://webpispatcher:port/sap/bc/ping we get an error, because the url goes to Java stack.
We also detected that on Web Dispatcher configuration for ABAP+Java we have ABAP and J2EE server groups and application servers.
For ABAP+Portal we have only J2EE groups on Web Dispatcher configuration.
Question:
Which SAP parameter (e.g. ms/server_port_0, icm/HTTP/j2ee_0) or Web Dispatcher parameter (ms/http_port) is responsible for generation of ABAP groups (e.g. PUBLIC) within Web Dispatcher?

Which SAP parameter (e.g. ms/server_port_0, icm/HTTP/j2ee_0) or Web Dispatcher parameter (ms/http_port) is responsible for generation of ABAP groups (e.g. PUBLIC) within Web Dispatcher?
In ABAP the logon group is handled by the ICF. In SICF you specify within the actual services(properties) which logon group that service should use for load balancing. As far as I remember though there is an exception if you are using an "end-to-end" ssl configuration where you can specify the destination logon group using wdisp/HTTPS/dest_logon_group parameter.
rdisp/mshost is the parameter on your web dispatcher that points to your message server to get a list of available logon groups.
Nelis

We want to separate ABAP+JAVA, or move ABAP or JAVA to another server

Hello,
I want to separate my instance dual stak ABAP+JAVA, I don't lnow what's the better procedure
or move ABAP or move JAVA, both stay in one server:sapnwd01 (it have BI,EP components)
We wear Solaris 5.10, Oracle 10.2.0.4, SAP NetWeaver 7.0 (ABAP+JAVA)
ABAP have SID:NWD with the same database NWD, and number:04
JAVA have SID:NWD with the same database NWD, and number:14
And these are my profiles:
sapnwd01:nwdadm 8% pwd
/sapmnt/NWD/profile
sapnwd01:nwdadm 9% ls -l
total 188
-rw-rr   1 nwdadm   sapsys      6557 Aug 4 19:33 DEFAULT.PFL
-rw-rr   1 nwdadm   sapsys     13962 Oct 2 17:22 NWD_DVEBMGS04_sapnwd01
-rw-rr   1 nwdadm   sapsys       701 Aug 21 2007 NWD_SCS14_sapnwd01
-rw-rr   1 nwdadm   sapsys      3829 Aug 4 19:33 START_DVEBMGS04_sapnwd01
-rw-rr   1 nwdadm   sapsys      1449 Aug 21 2007 START_SCS14_sapnwd01
I started with installation JAVA in another server:sapepd01 (with another version SAP NetWeaver 7.1)
Regards,
Oscar

Hi Sunny,
Thanks for you comments.
What's about the conecctions between JAVA-->ABAP and with development are these assigned to my SID:NWD?
Can I install another JAVA instance and after remove JAVA from instance ABAP+JAVA?
Development team only give me one or two days for it they don't want loose time in develop.
Do you have any links to these document?
Regards,

Dialog ABAP+Java instance fails to go to green (stays yellow)

ECC 6.0 SPS 13 (NW 17)
Win 2003
SQL 2005 (latest patch)
Using System Copy SR3
After performing a Hom system copy (from PRD) of my QAS system, the Java "component" of the dialog instance attached to the central instance fails to start. The central instance's java component loads just fine, but I get the following error in the jvm.bootstrap file of the DI.
Bootstrap MODE:
<INSTANCE GLOBALS>
determined by parameter [ID0328058].
Exception occurred:
com.sap.engine.bootstrap.SynchronizationException: Database initialization failed! Check database properties!
 at com.sap.engine.bootstrap.Bootstrap.initDatabaseConnection(Bootstrap.java:476)
 at com.sap.engine.bootstrap.Bootstrap.<init>(Bootstrap.java:146)
 at com.sap.engine.bootstrap.Bootstrap.main(Bootstrap.java:971)
 at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
 at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
 at java.lang.reflect.Method.invoke(Method.java:324)
 at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
==[ Caused by: ]==----
com.sap.engine.frame.core.configuration.ConfigurationException: Error while connecting to DB.
 at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.createConnection(DBConnectionPool.java:364)
 at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.<init>(DBConnectionPool.java:129)
 at com.sap.engine.core.configuration.impl.persistence.rdbms.PersistenceHandler.<init>(PersistenceHandler.java:38)
 at com.sap.engine.core.configuration.impl.cache.ConfigurationCache.<init>(ConfigurationCache.java:149)
 at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.init(ConfigurationManagerBootstrapImpl.java:236)
 at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.<init>(ConfigurationManagerBootstrapImpl.java:49)
 at com.sap.engine.bootstrap.Synchronizer.<init>(Synchronizer.java:74)
 at com.sap.engine.bootstrap.Bootstrap.initDatabaseConnection(Bootstrap.java:473)
 at com.sap.engine.bootstrap.Bootstrap.<init>(Bootstrap.java:146)
 at com.sap.engine.bootstrap.Bootstrap.main(Bootstrap.java:971)
 at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
 at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
 at java.lang.reflect.Method.invoke(Method.java:324)
 at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
Caused by: com.sap.sql.log.OpenSQLException: Could not load class com.microsoft.sqlserver.jdbc.SQLServerDriver.
 at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:106)
 at com.sap.sql.jdbc.NativeConnectionFactory.createNativeConnection(NativeConnectionFactory.java:143)
 at com.sap.sql.connect.OpenSQLDataSourceImpl.createPooledConnection(OpenSQLDataSourceImpl.java:608)
 at com.sap.sql.connect.OpenSQLDataSourceImpl.getPooledConnection(OpenSQLDataSourceImpl.java:285)
 at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPool.createConnection(DBConnectionPool.java:306)
 ... 14 more
Caused by: java.lang.ClassNotFoundException: com.microsoft.sqlserver.jdbc.SQLServerDriver
 at com.sap.engine.offline.FileClassLoader.findClass(FileClassLoader.java:691)
 at com.sap.engine.offline.FileClassLoader.loadClass(FileClassLoader.java:600)
 at com.sap.engine.offline.FileClassLoader.loadClass(FileClassLoader.java:578)
 at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:302)
 at java.lang.Class.forName0(Native Method)
 at java.lang.Class.forName(Class.java:141)
 at com.sap.sql.jdbc.NativeConnectionFactory.createNativeConnection(NativeConnectionFactory.java:134)
 ... 17 more
[Bootstrap module]> Problem occurred while performing synchronization.
Any thoughts on what I can do (without having to re-install the dialog instance) to fix this?

Hi,
I hope this helps you, my Basis team came up with the same problem. It is because of the JDBC driver that SR3 uses seems to be wrong. This is a slightly subtle problem and it took me a while to find.
- Open configtool
- Go to instance --> dispatcher --> Configuration Manager --> Local Properties --> rdbms.driverLocation
- Change it to C:\usr\sap\SMB\DVEBMGS00\exe\mssjdbc\sqljdbc.jar (or similar)
- Go to instance > server> Configuration Manager --> Local Properties --> rdbms.driverLocation
- Change it to C:\usr\sap\SMB\DVEBMGS00\exe\mssjdbc\sqljdbc.jar (or similar)
On my system it was set to C:\usr\sap\SMB\DVEBMGS00\exe\mssjdbc\base.jar;C:\usr\sap\SMB\DVEBMGS00\exe\mssjdbc\util.jar;C:\usr\sap\SMB\DVEBMGS00\exe\mssjdbc\sqlserver.jar;C:\usr\sap\SMB\DVEBMGS00\exe\mssjdbc\spy.jar which is the old school SQL Server driver.
Once you have changed these settings, save, exit configtool and restart the whole cluster. It will then start.
Regards,
John

ABAP or ABAP+JAVA in Solman Installation?

Hi,
We are going to implement Solution Manager 7 (SR3).
1. I would like to ask whats the best installation variant in installing solution manager? (ABAP or ABAP+ JAVA)
2. What are the additional capabilities of SolMan if we install ABAP+JAVA and not ABAP only?
We are planning on using solution manager for:
- Central Administration
- Change request management
- Root Cause Analysis
- Delivery of SAP support service
Thanks,
Roel

Dear
Solution Manager has to have ABAP+JAVA stack so your choice is easy.
Solution Manager Java Stack offers additional functionality as well as tools.
For example Solution Manager Diagnostics.
Kind regards
Tom

ABAP+Java Kernel and only Java Kernel

Hi Friends,
Is there any difference in ABAP+Java Kernel and only Java Kernel?
Can we use the kernel for above both from the same location as below?
1#
Support Packages and Patches> Additional Components> SAP Kernel> SAP KERNEL 64-BIT UNICODE> SAP KERNEL 6.40 64-BIT UNICODE
Following Files
DB Dependent - ORACLE
          SAPEXEDB_175-20000227.SAR
          DBATL640O92_44-20000227.SAR
Database Independent
          SAPEXE_175-20000226.SAR
Assuming above SAR files contain R3trans, R3load, tp ,... also.
2#
As per my knowledge SAP has given one more path to download J2EE SP's which contains Kernel and J2EE Support Packages.
http://service.sap.com/patches --> Support Package and Patches -> Entry by Application Group -> SAP NetWeaver -> SAP NetWeaver -> SAP NetWeaver 04 -> Entry by Component -> Application Server Java -> SAP J2EE Engine 6.40 -> J2EERT19_0-10001982.SAR/J2EERT20_0-10001982.SAR (OS Independent) and CTRLDB219_0-20000114.SAR(OS Dendependent)
What is the difference between above two kernels?
1# contains R3trans, R3load, tp ...etc which is exclusively used by ABAP Stack related functions. The startsap script used here would check R3trans -d authentication successful before starting database and then only it starts the database from sidadm. I observed OPS$ users available in only ABAP schema SAPSID but not available in SAPSIDDB. If I use the kernel downloaded from 1# for Java Stack only system, startsap would fail as R3trans authentication fail as there is no ABAP schema in Java systems.
This applies well for ABAP+JAVA or only ABAP based systems.
If I use only JAVA Stack based system can I use the kernel downloaded from 1# . What is the kernel and SP available in 2#? Is this also contains the same kernel given in 1# or it is different. I also observed in JAVA they are not calling Kernels by Patch No like 154, 175... they call it by SP19. Please correct me if I am wrong.
Did anyone come accross this type if issue? I would appreciate if anyone can clarify my questions given above.
My main target is to have clear strategy for ABAP+JAVA, ABAP, JAVA kernels to avoid mess up. Which one to download? What is best practice? Differences?
Thanks and Regards
Prasad

Hi Sacha,
Thank a lot for your answer I am clear now. Before rewarding points to you.
I have final question.
You mean that there is not seperate kernel for Java Stack Systems.. When we apply SP11 or SP19 by default it applies Kernel and also support packages w.r.t the SP. Do we have option to seperate Kernel and Support package while applying SP's for Java System?
If we take for example SAP NW 2004 (WAS 640) latest kernel is 175 (I mean ABAP+JAVA). If I want to know the latest kernel for Java Stack system, Do I need to say it is at level SP19 or check the sapwebdisp -V (Resepctive patch level)?
For ABAP system we check disp+work -V to get the source kernel version. How to justify the source kernel version for Java System?
As per SAP Note: 710914 - Upgrading the J2EE Engine Startup Framework after applying SP for Java System, Do we need to upgrade J2EE Startup Framework?
Thanks and Regards,
Prasad

SAP Web AS ABAP + Java system

Hello All,
I am looking at the installation guide of SAP XI. I did not understand one thing from that guide. it says
"If you want to install the component SAP Exchange Infrastructure:Prepare the SAP Web AS ABAP + Java system for SAP Exchange Infrastructure"
I would appreciate if anyone of you can clarify what is SAP Web AS ABAP + Java system.
What I have been thinking all these days is we could have either Java(J2EE) or ABAP Web Application Server.
I don't understand what this ABAP + Java system is ?
Thanks in Advance

Hi Vanaja,
in the world of WAS 6.40 you can install it as three variant.
1. ABAP standalone (with it own SID) e.g. for R/3
2. Java stanalone (with it own SID) e.g. for EP 7.0
3. ABAP + Java as an Add in (Java and ABAP has the same SID)
For XI you have to install a so called double stack WAS 6.40 or SAP Web AS ABAP + Java System or ABAP + Java Add in. All this describe the same variant of the installation.
Normally you will have one database where J2EE-Scheme and
the ABAP-Schema is on the same database. I would really
suggest you to read the installation master SR1 there you
will get the understanding what is the difference.
regards,
Ly-Na Phu

Java Server Nodes / Dialog Instance

Hi All,
When do we go for increase of Java Server nodes and Dialog instance?
Can i know the pros and cons of the same
my server is very slow in responding. I have tried the option of increasing the heap size but then i have little sucess
Rgds
aditya

Install a server process when the incoming request are many and the you can utilize more RAM memory
for eg if there are 8GB RAM and you have 1 server process the maximum u can give it is 2GB while the max 4GB can be utilized by any of the server processes in all in this system
Do not increase this heap size on the same server process (in windows u cant do it also max is 2GB) since then the garbage collection would take longer and also would run in few intervals
A Dialog instance is used when the system resources is completely exhausted and then we go for another hardware and install a fresh dailog instance there.. Its always recommended to use a Web Dispatcher in between the outside world and the SAP server in cluster mode
Hope i am right since i didnt find this information anywhere its based on my understanding and brainstorming sessions with other admins
RGds
Aditya

Is it really necessary to re-install the dialog instances?

Hi,
We are upgrading from NW04 (WAS 6.40) to NW04s (WAS 7.00) ABAP SR2 only on Windows 2003 with Oracle 9i. There is no JAVA stack in our environment and we don't need it.
In production system we have five separate dialog instances on five different physcial machines. All these application servers runnon Windows 2003 as well.
Reading through the NW04s upgrade guide "SAP NetWeaver 2004s
Application Server ABAP" dated 28th November 2006,
section 6.26 states we have to "install the new dialog instance on top of the old dialog instance".
In the past upgrades eg. upgrade to NW04, we did not have to use SAPINST to re-install the dialog instance. Instead, the official NW04 (WAS6.40) upgrade guide just instructs us to amend instance profile parameters and copy the new version of kernel binaries either manually or using sapcpe.
I want to avoid doing this re-installation work for the five dialog insatnces. Because I want to reduce the production outage period.
Question all the upgrade experts
1) Does any one have experience that indicates I should follow the SAP documentation to un-install 6.40 instance and then re-install at 7.00 level again?
2) Also, what is the technical reason to uninstall and re-install?
The full section 6.26 section paragraph is pasted here.
6.26 Upgrading or Installing Dialog Instances
After the upgrade of the central instance, you need to upgrade the dialog instance to the new release.
To do this, you install the new dialog instance on top of the old dialog instance using the tool SAPinst.
You can now also install additional dialog instances, if necessary.
Procedure
Proceed as described in the document Installation Guide ‒ <SAP NetWeaver / SAP solution> <Technology> on
<Operating System>: <Database>.
Caution
If you upgrade a dialog instance, make sure to use the same instance number as on the source release.

Hi Matt,
Thanks for your detailed response. Our system is very much heavy batch processing oriented. Therefore our management does not want to hand over the production system until all dialog instances are ready at the new version.
It would be great if the upgrade process is quick as you pointed out.
Can you show me where this "upgrade dialog instance" option in V7 SAPINST? FYI. I should be able to start sapinst over the next few days to look for this upgrade option.
However, I just got a response from ASIA-PACIFIC OSS that says I have to un-install and re-install the existing dialog instance. Their response is as follows :
The dialog instance does not need to be upgraded since in the dialog
instance, no database exists but only the kernel files and some
profiles exist. After the upgrade, you should re-install the dialog
instance since in the central instance, the kernel release has been
changed to 700 due to the upgrade. But in the old dialog instance,
it should still have the old release kernel files and profiles.
Thus, by using reinstallation, the new release kernel files will be
installed in the dialog instance.
As to the procedure, you should uninstall the old instance firstly since during the installation, the files will be put to the same path of the
old instance.We recommend you to backup the old dialog instance files
before the installation.Sorry there is no related note but you can refer to the upgrade and installation guides.
Thanks for your input and assistance.
Benny Kwan
National Australia Bank

How to delete Dialog instance on NW04

Hi guys
I have an installation NW04 on Cluster MSCS:
Central Instance on node A
SCS instance on Cluster Disk
Dialog instance on node B
We have performed upgrade to NW04s, and now in postprocessin we should deinstall Dialog Instance and install it again with software NW04s.
Here documentation guide:
****************************************+
After the upgrade of the central instance, you need to upgrade the dialog instance to the new release.
Due to the fact that some special settings and binaries on a dialog instance cannot be upgraded
remotely, you can only upgrade a dialog instance by uninstalling the old instance and then installing
a new dialog instance with the tool SAPinst.
Procedure
1. Uninstall the old dialog instances as described in the document Installation Guide ‒ SAP Web Application
Server 6.40 Java on <Operating System>: <Database>, Part II Installation and Post-Installation.
2. Install the new dialog instances as described in the document Installation Guide ‒ <SAP NetWeaver /
SAP application> <Technology> on <Operating System>: <Database>.
Point 1, is :
*************+
1. Log on as a user with domain administration rights.
2. Choose Start u2192 Settings u2192 Control Panel u2192 Add/Remove Programs.
3. The Add/Remove Programs dialog box appears.
4. Find the SAP entries.
. Note
Each SAP instance that is installed on the computer is listed with an entry like SAP Application Server
for System <SAPSID> instance.
5. Choose Remove.
The SAP Uninstall Wizard starts.
6. In the Welcome window, choose Next.
The dialog box Uninstalling SAP System appears for you to select an uninstall method
Depending on your selection, note the following when you use the check box to delete an SAP instance:
-- If your check box is marked gray, you delete or uninstall the following:
The SAP instance directory, for example:
\usr\sap\<SAPSID>\D00
Services, for example:
SAP<SAPSID>_00
The whole system directory, for example:
\usr\sap\<SAPSID>\*
-- If your check box is marked black, you delete or uninstall the following:
The SAP instance directory, for example:
\usr\sap\<SAPSID>\D00
Services, for example, SAP <SAPSID>_00
The whole system directory, for example:
\usr\sap\<SAPSID>\*
Local and domain user accounts
If you have different SAP instances that use the same <SAPSID>, you can delete the instance
directory only.
The wizard informs you when the SAP system or selected instances have been deleted successfully
But in my node B there is no SAP entry on Start u2192 Settings u2192 Control Panel u2192 Add/Remove Programs, however Dialog Instance exists, and windows service exists...and so on...
So how can we deinstall this dialog instance???
Thanks and regards
Javier

Hi
In node A there is JC30 (Java central instance)
In node B there is J32 (Java Dialog instance)
SCS31 (Services Central Instance) is now in node A, but can be switched.
Database Instance is OUTSIDE, is located on a Unix Server. (is not affected in this case)
Looking node B, there is no entry on Adding/Removing Programs regarding to SAP instance.
Of course, I can see windows services on node B, one for J32, other for SAPoscol, and one more for SCS31.
Any idea?
Thanks
Javier

Dialog instance installation error

Hi all,
While installing a dialog instance of ECC (EHP 5 for SAP ERP 6.0) on AIX 7.1 I am facing an error in phase "Unpack SAP archives"
the error is as under
An error occurred while processing option Enhancement Package 5 for SAP ERP 6.0 > SAP Application Server ABAP > Oracle > High-Availability System > Dialog Instance( Last error reported by the step :System call failed. Error 13 (Permission denied) in execution of system call 'mkdir' with parameter (/sapmnt/<SID>/exe/.created_by_SAPinst, S_IRWXU | S_IRWXG | S_IRWXO), line (393) in file (syuxcpath.cpp), stack trace: iaxxejsctl.cpp: 272: EJS_ControllerImpl::executeScript() iaxxejsbas.hpp: 450: EJS_Base::dispatchFunctionCall() iaxxejsexp.cpp: 178: EJS_Installer::invokeModuleCall() syxxcfsmgt.cpp: 542: CSyFileSystemMgtImpl::createDirectory(/usr/sap/<SID>/SYS/exe/run/.created_by_SAPinst) syuxcpath.cpp: 380: CSyPath::createDirectory() .). You can now:
Choose Retry to repeat the current step.
Choose Log Files to get more information about the error.
Stop the option and continue with it later.
Log files are written to /tmp/sapinst_instdir/ERPEhP5/AS-ABAP/ORA/HA/DI.
files systems
/sapmnt/SID/ is NFS mounted with full permission and sidadm:sapsys as owner
/usr/sap has permission 777
Umask is set to 022
/etc/exports of the CI node is properly maintained
Kindly suggest
Sandeep

Hi,
System call failed. Error 13 (Permission denied) in execution of system call 'mkdir' with parameter (/sapmnt/<SID>/exe/.created_by_SAPinst
SAPinst is unable to create a directory exe under /sapmnt/<SID>
Could you run the following commands
chmod -R 777 /sapmnt/<SID>
chown -R <sidadm>:sapsys /sapmnt/<SID>
Retry after these changes.
Regards,
Deepak Kori

Dialog Instance Installation error in last Phase

Dear experts
I have Installed DBCI with HACMP environment with Oracle 11G and AIX6.1 Production system
Now I am trying to install Dialog instance D02 but i am facing problem in last Phase 'shutdown and start Dialog instance'
the error as follows
An error occurred while processing option SAP ERP 6.0 EHP4 Ready - Support Release 1 > SAP Application Server ABAP > Oracle > High-Availability System > Dialog Instance Last error reported by the step: ABAP processes of instance GPD/D02 [ABAP: UNKNOWN] did not start after 10:00 minutes. Giving up.). You can now:
Choose Retry to repeat the current step.
Choose Log Files to get more information about the error.
Stop the option and continue with it later.
Log files are written to /perfdata/saplog/sapinst_instdir/ERPEhP4/AS-ABAP/ORA/HA/DI.
I will appreciate if anyone helps me <removed>
Thanks in Advance
krishna
Moderator message: not directly related to ABAP development, please have a look in the respective technical forum (Netweaver, Application Server, ...).
Edited by: Thomas Zloch on Mar 18, 2011 9:19 AM

problem solved

ECC6.0 EhP4 Dialog Instance Installation error in last Phase with AIX6.1

Dear experts
I have Installed DBCI with HACMP environment with Oracle 11G and AIX6.1 Production system
Now I am trying to install Dialog instance D02 but i am facing problem in last Phase 'shutdown and start Dialog instance'
the error as follows
An error occurred while processing option SAP ERP 6.0 EHP4 Ready - Support Release 1 > SAP Application Server ABAP > Oracle > High-Availability System > Dialog Instance Last error reported by the step: ABAP processes of instance GPD/D02 ABAP: UNKNOWN did not start after 10:00 minutes. Giving up.). You can now:
Choose Retry to repeat the current step.
Choose Log Files to get more information about the error.
Stop the option and continue with it later.
Log files are written to /perfdata/saplog/sapinst_instdir/ERPEhP4/AS-ABAP/ORA/HA/DI.
I will appreciate if anyone helps me
Thanks in Advance
krishna

INFO 2011-03-18 11:40:35.410
Connect to message server (gulfeccdbci/3900) succeeded.
INFO 2011-03-18 11:40:35.410
Disconnect from message server (gulfeccdbci/3900) succeeded.
INFO 2011-03-18 11:41:05.681
Connect to message server (gulfeccdbci/3900) succeeded.
INFO 2011-03-18 11:41:05.682
Disconnect from message server (gulfeccdbci/3900) succeeded.
INFO 2011-03-18 11:41:05.685
Connect to message server (gulfeccdbci/3900) succeeded.
INFO 2011-03-18 11:41:05.685
Disconnect from message server (gulfeccdbci/3900) succeeded.
INFO 2011-03-18 11:41:34.922
Connect to message server (gulfeccdbci/3900) succeeded.
INFO 2011-03-18 11:41:34.922
Disconnect from message server (gulfeccdbci/3900) succeeded.
INFO 2011-03-18 11:41:34.925
Connect to message server (gulfeccdbci/3900) succeeded.
INFO 2011-03-18 11:41:34.925
Disconnect from message server (gulfeccdbci/3900) succeeded.
INFO 2011-03-18 11:42:05.143
Connect to message server (gulfeccdbci/3900) succeeded.
INFO 2011-03-18 11:42:05.143
Disconnect from message server (gulfeccdbci/3900) succeeded.
INFO 2011-03-18 11:42:05.145
Connect to message server (gulfeccdbci/3900) succeeded.
INFO 2011-03-18 11:42:05.146
Disconnect from message server (gulfeccdbci/3900) succeeded.
INFO 2011-03-18 11:42:35.537
Connect to message server (gulfeccdbci/3900) succeeded.
INFO 2011-03-18 11:42:35.537
Disconnect from message server (gulfeccdbci/3900) succeeded.
INFO 2011-03-18 11:42:35.540
Connect to message server (gulfeccdbci/3900) succeeded.
INFO 2011-03-18 11:42:35.541
Disconnect from message server (gulfeccdbci/3900) succeeded.
INFO 2011-03-18 11:43:04.800
Connect to message server (gulfeccdbci/3900) succeeded.
INFO 2011-03-18 11:43:04.801
Disconnect from message server (gulfeccdbci/3900) succeeded.
INFO 2011-03-18 11:43:04.803
Connect to message server (gulfeccdbci/3900) succeeded.
INFO 2011-03-18 11:43:04.804
Disconnect from message server (gulfeccdbci/3900) succeeded.
INFO 2011-03-18 11:43:35.023
Connect to message server (gulfeccdbci/3900) succeeded.
INFO 2011-03-18 11:43:35.023
Disconnect from message server (gulfeccdbci/3900) succeeded.
INFO 2011-03-18 11:43:35.026
Connect to message server (gulfeccdbci/3900) succeeded.
INFO 2011-03-18 11:43:35.026
Disconnect from message server (gulfeccdbci/3900) succeeded.
INFO 2011-03-18 11:44:05.383
Connect to message server (gulfeccdbci/3900) succeeded.
INFO 2011-03-18 11:44:05.384
Disconnect from message server (gulfeccdbci/3900) succeeded.
INFO 2011-03-18 11:44:05.386
Connect to message server (gulfeccdbci/3900) succeeded.
INFO 2011-03-18 11:44:05.387
Disconnect from message server (gulfeccdbci/3900) succeeded.
INFO 2011-03-18 11:44:35.646
Connect to message server (gulfeccdbci/3900) succeeded.
INFO 2011-03-18 11:44:35.646
Disconnect from message server (gulfeccdbci/3900) succeeded.
INFO 2011-03-18 11:44:35.649
Connect to message server (gulfeccdbci/3900) succeeded.
INFO 2011-03-18 11:44:35.650
Disconnect from message server (gulfeccdbci/3900) succeeded.
INFO 2011-03-18 11:45:04.873
Connect to message server (gulfeccdbci/3900) succeeded.
INFO 2011-03-18 11:45:04.873
Disconnect from message server (gulfeccdbci/3900) succeeded.
INFO 2011-03-18 11:45:04.876
Connect to message server (gulfeccdbci/3900) succeeded.
INFO 2011-03-18 11:45:04.876
Disconnect from message server (gulfeccdbci/3900) succeeded.
INFO 2011-03-18 11:45:35.094
Connect to message server (gulfeccdbci/3900) succeeded.
INFO 2011-03-18 11:45:35.095
Disconnect from message server (gulfeccdbci/3900) succeeded.
INFO 2011-03-18 11:45:35.097
Connect to message server (gulfeccdbci/3900) succeeded.
INFO 2011-03-18 11:45:35.097
Disconnect from message server (gulfeccdbci/3900) succeeded.
INFO 2011-03-18 11:46:05.480
Connect to message server (gulfeccdbci/3900) succeeded.
INFO 2011-03-18 11:46:05.480
Disconnect from message server (gulfeccdbci/3900) succeeded.
INFO 2011-03-18 11:46:05.483
Connect to message server (gulfeccdbci/3900) succeeded.
INFO 2011-03-18 11:46:05.483
Disconnect from message server (gulfeccdbci/3900) succeeded.
INFO 2011-03-18 11:46:34.729
Connect to message server (gulfeccdbci/3900) succeeded.
INFO 2011-03-18 11:46:34.729
Disconnect from message server (gulfeccdbci/3900) succeeded.
INFO 2011-03-18 11:46:34.731
Connect to message server (gulfeccdbci/3900) succeeded.
INFO 2011-03-18 11:46:34.732
Disconnect from message server (gulfeccdbci/3900) succeeded.
INFO 2011-03-18 11:47:04.952
Connect to message server (gulfeccdbci/3900) succeeded.
INFO 2011-03-18 11:47:04.952
Disconnect from message server (gulfeccdbci/3900) succeeded.
INFO 2011-03-18 11:47:04.955
Connect to message server (gulfeccdbci/3900) succeeded.
INFO 2011-03-18 11:47:04.955
Disconnect from message server (gulfeccdbci/3900) succeeded.
INFO 2011-03-18 11:47:35.328
Connect to message server (gulfeccdbci/3900) succeeded.
INFO 2011-03-18 11:47:35.328
Disconnect from message server (gulfeccdbci/3900) succeeded.
INFO 2011-03-18 11:47:35.331
Connect to message server (gulfeccdbci/3900) succeeded.
INFO 2011-03-18 11:47:35.332
Disconnect from message server (gulfeccdbci/3900) succeeded.
INFO 2011-03-18 11:48:05.593
Connect to message server (gulfeccdbci/3900) succeeded.
INFO 2011-03-18 11:48:05.594
Disconnect from message server (gulfeccdbci/3900) succeeded.
INFO 2011-03-18 11:48:05.596
Connect to message server (gulfeccdbci/3900) succeeded.
INFO 2011-03-18 11:48:05.597
Disconnect from message server (gulfeccdbci/3900) succeeded.
ERROR 2011-03-18 11:48:05.724
CJS-30149 ABAP processes of instance GPD/D02 [ABAP: UNKNOWN] did not start after 10:00 minutes. Giving up.
WARNING 2011-03-18 11:48:06.127
Could not run /usr/sbin/lsattr -l aio0 -E -O successfully. Either the return code was != 0 or the process terminated abnormally.
ERROR 2011-03-18 11:48:06.508
FCO-00011 The step start with step key |NW_DI|ind|ind|ind|ind|0|0|NW_DI_Instance|ind|ind|ind|ind|di|0|start was executed with status ERROR ( Last error reported by the step: ABAP processes of instance GPD/D02 [ABAP: UNKNOWN] did not start after 10:00 minutes. Giving up.).
INFO 2011-03-18 11:48:06.955
Creating file /perfdata/saplog/sapinst_instdir/ERPEhP4/AS-ABAP/ORA/HA/DI/__instana_tmp.xml.
WARNING 2011-03-18 11:48:07.374
Could not run /usr/sbin/lsattr -l aio0 -E -O successfully. Either the return code was != 0 or the process terminated abnormally.
INFO 2011-03-18 12:40:16.767
An error occured and the user decided to stop.\n Current step "|NW_DI|ind|ind|ind|ind|0|0|NW_DI_Instance|ind|ind|ind|ind|di|0|start".
INFO 2011-03-18 12:40:21.637
Working directory changed to /perfdata/saplog/sapinst_instdir/ERPEhP4/AS-ABAP/ORA/HA/DI.
INFO 2011-03-18 12:40:21.736
Creating file /perfdata/saplog/sapinst_instdir/.lastInstallationLocation.
INFO 2011-03-18 12:40:23.739
Cancelled task 0.
Edited by: krishna murthy on Mar 18, 2011 12:50 PM

Windows Central Instance ABAP+JAVA plus UNIX ABAP dialog instances ?

Similar Messages

Maybe you are looking for