Windows client monitoring Management packs for SCOM 2012

 Hello All,
 Please provide the link for  windows client monitor management pack for SCOM 2012 SP1 ,if there is any  available .
I have got one link for this but it is for SCOM 2007 .
Regards
Richa KM

http://www.microsoft.com/en-us/download/details.aspx?id=15700
Yes you can download from this link and you can import it in scom 2012 sp1.although it is for scom 2007

Similar Messages

  • Microsoft Intune Management Pack for SCOM 2012 R2

    Hi,
    Is Management Pack of Microsoft Intune available to monitor the Intune Alerts and view the Intune dashboard ?
    Is any API available of Intune for SCOM to view the Dashboard etc..?
    Shailendra Dev

    Hi
    Nope, there is no Management pack available. You can check the Management pack here
    http://social.technet.microsoft.com/wiki/contents/articles/16174.microsoft-management-packs.aspx it is the most accurate list. For checking Intune Status check this Dashboard
    http://status.manage.microsoft.com/StatusPage/ServiceDashboard
    Cheers,
    Stefan
    Blog: http://stefanroth.net If my post helped you, please take a moment to vote as helpful and\or mark as an answer

  • Exchange Server 2013 Management Pack in SCOM 2012, can not update healthset status automatically

    Hi, all
    I have Exchange Server 2013 and SCOM 2012 installed. I have imported Exchange Server 2013 Management Pack to SCOM 2012. Now I have a question that when there is a service not healthy, I can find the red alert in my alert view with the Exchange 2013 server,
    but after the service is healthy automatically, the red alert is still there. I can only make it become green healthy status after reseting the healthset status in the healthset explorer.
    Does anyone know how to make the server become green healthy status automatically after the monitor is healthy?
    Thank you.
    Nile

    Hi,
    How many Exchange Servers do you have? Does this issue only occur on one Exchange Server?
    Please check the application log on the problematic Exchange server and see whether there are any related event error.
    Regards,
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Simon Wu
    TechNet Community Support

  • Latest 2003 DHCP management pack for SCOM 2007 R2 ?

    According to the links below the download of the Windows Server DHCP Management Pack includes monitoring of 2003 and 2008 DHCP but when running the .msi I only see references to a 2008 R2 MP.
    http://pinpoint.microsoft.com/en-us/applications/windows-server-dhcp-management-pack-for-system-center-operations-12884902059
    http://www.microsoft.com/downloads/en/details.aspx?FamilyID=e5b48bef-4b21-4743-b562-580ec7984b24&displaylang=en
    I'm looking for latest 2003 DHCP MP.
    thanks

    I think the version 6.0.6709.0 which can be get in Microsoft Download Center should be the latest version and it supports Windows Server 2003. You can
    see the Release History “11/7/2008 - Updated release, version 6.0.6452.0, for DHCP 2000/2003/2008”, “6/28/2010 - Updated release, version 6.0.6709.0", with added support for DHCP 2008 R2”:
    Windows Server DHCP Management Pack for System Center Operations Manager 2007
    http://www.microsoft.com/downloads/en/details.aspx?displaylang=en&FamilyID=e5b48bef-4b21-4743-b562-580ec7984b24
    Thanks.
    Nicholas Li - MSFT
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • UCS management pack for SCOM

    I've installed the UCS management pack for Microsoft SCOM 2007 R2. It appears to be working, however I now keep seeing all computers that have the SCOM agent installed trying to run the cisco.ucs.computer.probeaction.vbs script, which fails and generates alerts. Does anyone know why these servers that are unrelated to UCS would be trying to run these scripts, or how to fix this problem?

    The Problem is that you use an “&” string in a name of one of the protection Groups.
    Change the name of the protection Group where you have used an “&” symbol
    . Restart the “System Center Management” and you should see that the discovery success.
    If still have same issue, started to register the differtent dll’s again on the machine and apparently registering the MOMScriptAPI.dll
    http://scug.be/dieter/2012/11/08/scom-event-id-21406-file-name-or-class-not-found/
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
    Mai Ali | My blog: Technical | Twitter:
    Mai Ali

  • SCVMM 2012R2 Management Pack for SCOM 2012R2?

    Per the requirements of the SCVMM 2012R2 Dashboard Management Pack:
    http://www.microsoft.com/en-us/download/details.aspx?id=43707
    It requires the following files:
    Microsoft System Center Virtual Machine Manager Library 3.2.7510.0
    Microsoft System Center Virtual Machine Manager 2012 R2 Discovery 3.2.7510.0
    Microsoft System Center Virtual Machine Manager 2012 R2 Monitoring 3.2.7510.0
    However I am unable to find this management pack anywhere. Can someone point me in the right direction?

    Ah, got it. I was confused by the vocabulary. Followed this document:
    http://technet.microsoft.com/en-US/library/hh882396.aspx
    thanks!

  • SCOM 2012 R2 Management Packs for monitoring IBM Tivoli

    Are there management packs available to monitor IBM Tivoli through SCOM 2012 R2?
    If yes, what all components in IBM Tivoli family can be monitored?
    Thanks in advance

    Hi,
    I think if there is any Management Pack for IBM Tivoli, then this Management Pack should be provided by IBM, and this may be fee-based also, I would like to suggest you contact IBM for this.
    And hope the below link be helpful:
    http://unofficialsystemcentercatalog.wordpress.com/2012/12/27/operations-manager-is-there-a-management-pack-for/
    Regards,
    Yan Li
    Regards, Yan Li

  • Windows Monitoring Checklists for SCOM 2012 R2

    Hi All,
    We are in SCOM 2007 to 2012 migration stage where we will have to check Windows monitoring with SCOM 2012 that how it works better than 2007, what all new components to be considered and focused. Kindly share if you have any checklists to be verified before
    we proceed further. Usually resources like CPU, Memory, File System and Network Performance, Services, events and logs monitoring would be considered. Help to get if anything I missed to list out here.
    Thanks.
    Regards,
    Raj.

    Hi,
    If you are looking for system requirements for installation of SCOM 2012 R2, please refer to the below link:
    System Requirements: System Center 2012 R2 Operations Manager
    http://technet.microsoft.com/en-us/library/dn249696.aspx
    And more details about how to upgrade from SCOM 2007 R2 to newer version, the below article should be helpful.
    Upgrading from System Center Operations Manager 2007 R2
    http://technet.microsoft.com/en-us/library/hh476934.aspx
    We should import management packs according to your environment and your need. For example, to monitor Windows operating system, we should import Windows operating system management packs.
    To monitor AD, we should import Active Directory corresponding management packs.
    Regards,
    Yan Li
    Regards, Yan Li

  • UCS Management Pack for System Center 2012 OpsMgr add monitor wizard error

    We're successfully using the 2.6.0.179 version of the UCS Management Pack for System Center 2012 Operations Manager in our 2012 SP1 OpsMgr environment; however, in the new 2012 R2 OpsMgr environment we've stood-up and in which we installed the 2.6.2.0 version of the UCS MP, we're getting an error when trying to run the Add Monitoring Wizard under the Management Pack Templates node of the Authoring pane. We get the same error from the 2.6.1.0 version of the UCS MP as well. The text of the error is as follows:
    "The page [Cisco.UCS.MP.UI.Proxy.Template.Page.ProxyDetailsPage] in the assembly [Cisco.UCS.MP.UI.Culture="",PublicKeyToken="6c96076cdf2c87a",Version="2.6.0.0"] could not be loaded. Please make sure that the account you are running under has sufficient privileges to load the given assembly, or the management pack that defines this page is installed or the assembly containing the page is in the path of the executible or that the page derives from known Operations Manager page type."
    I'm an admin user in OpsMgr, so this should not be a user privilege issue, and that leaves the MP itself. The fact that a 2.6.0.0 version is mentioned makes me wonder if the base version of the MP must be installed before the 2.6.2 version. I'd test this, but we no longer have that version, and its no longer available for download from Cisco that I can see.
    Has any dealt with this issue successfully, or have any insight into the problem?

    Solved...the requirement is that you must do the MP configuration from the SCOM console on the SCOM Management Server where you installed the Cisco UCS MP; you can't do it from a SCOM console on a remote computer like I was trying to do.

  • SCOM 2012/SP1/R2 - What Is the Best Management Pack for HP Storage (P2000)

    Hi all!
    What would be the best recommended Management Pack for HP Storage (P2000) for the SCOM 2012/SP1/R2? Free products are privileged, of course, but we would also consider the paid ones.
    Thank you very much for your time and attention!
    Best regards!

    Hi,
    Recently I created Custom Management pack for MSA P2000 Storage. Its primary purpose is to monitor performance.
    See: http://jurelab.wordpress.com/ for details.
    Hope it helps
    Jure

  • SCOM 2012 R2 Management Pack for Fortinet

    Is there any management pack to monitor fortinet for scom 2012 R2

    Hi Syed,
    As well, you can try to monitor your Fortinet with SNMP traps:
    http://stefanroth.net/2014/04/07/scom-2012-snmp-traps-how-the-heck-do-i-get-it-working/
    http://docs-legacy.fortinet.com/cb/html/index.html#page/FOS_Cookbook/Install_advanced/snmp_setup.html
    Natalya
    ### If my post helped you, please take a moment to Vote as Helpful and\or Mark as an Answer

  • Management Pack for Windows Server 2008 Enterprise SP1

    Hello,
    I tried to manage the performance of a Windows Server 2008 Enterprise SP1 (6.0.6001) but SCOM 2007 R2 just check the availability with a ping status.
    I have installed the normal management packs:
    On the same SCOM, I have servers with Windows Server 2008 R2 and they work perfect.
    What can I do?

    Hi Journey Tinoco,
    Performance can be monitored by using the active alerts TAB where a alert / alerts will be triggered based on the default management pack which you have installed / imported or if you have created a custom monitor based on your preference on what performance
    counter you want to monitor on windows server 2008 servers VIA SCOM.
    Or you can pull server performance report specific for Windows server 2008 from the reporting TAB as per the below screen shot for details.
    The one which you are opened is the health explorer view which is not showing much details.
    Go to reporting TAB ===> Select Windows server 2008 operating system monitoring and then What ever appropriate report you need to pull based on your requirement. For example i have pulled a report below for "Operating system performance.
    Over here Click object and select the computer name and the icon should be a Windows serve / Computer as per the icon in my screen shot below. Select the time and date from and to the report you want and dont touch the add object option. Once done click
    the Run button on the left to you will get the report as below.
    Please note: If the below report is what you are looking for is not available in your SCOM's  reporting TAB. Then you have not installed the reporting Management pack for Windows server 2008 monitoring. Download
    it from the below link.
    http://www.microsoft.com/en-in/download/details.aspx?id=9296
    Hope this helps you.
    Gautam.75801

  • System Center Management Pack for Windows Server Operating System not available

    Hi,
    i have problems to download the updated version of the System Center Management Pack for Windows Server Operating System.
    Here is a link that says that this MP was updated some days before but the download link is broken:
    http://www.microsoft.com/germany/technet/aktuell/news/show.aspx?id=msdn_de_56942
    http://www.microsoft.com/en-us/download/details.aspx?id=9296&WT.mc_id=rss_alldownloads_all
    If i try download this MP through the SCOM 2012 Console i get also an download error.
    Can you help me?
    Thanks

    Hi,
    Don't import the MP, there is a bug in the MP
    https://nocentdocent.wordpress.com/2015/01/13/scom-os-mp-6-0-7294-0-serious-flaw/
    http://thoughtsonopsmgr.blogspot.dk/2015/01/warning-dont-update-to-latest-windows.html
    http://kevingreeneitblog.blogspot.dk/2015/01/scom-new-windows-server-os-management.html
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • Management Pack for Server 2008 OS Monitoring version 6.0.7296 cannot be installed or downloaded from the catalog

    In our newly installed Operations Manager I'm trying to install the MP's for monitoring Windows Server 2008 OS through the catalog option. Every attempt (including downloading it through the OpsMgr console) fails with the following error:
    Windows Server 2008 Operating System (Monitoring) did not pass the security verification. 
    The management pack cannot be downloaded and the temporary file has been deleted.
    Could not load management pack [ID=Microsoft.Windows.Server.2008.Monitoring, Keytoken=31bf3856ad364e35, Version=6.0.7296].
    This includes the required packs: "Windows Server Operating System Library v6.0.7296" and "Windows Server 2008 Operating System (Discovery) v6.0.7296".
    The only option I found was downloading it directly from the website http://www.microsoft.com/en-us/download/details.aspx?id=9296 but I'm a bit anxious if it can't be downloaded from the catalog. Is this pack revoked? Or could there be something wrong
    in our environment that prevents us from downloading it from the catalog?

    I have the exact same issue - and when I select to download from the catalog, I get an error that the security certificate cannot be verified. I checked it, and it is valid till 2016, so I selected continue and then it works normally. however I do get the
    same list of errors.
    The normal "manual" download is available, and if it was pulled by MS, they would block the download button there too ?
    I downloaded the MP manually and installed it without any issues. same for the sharepoint 2010 MP 14.0.7135.5000 mp. installing via the catalog failed while the manual download was available and works OK.
    (and the weird thing is - I downloaded / installed a few other updates via the catalog fine....)
    System Center Management Pack for Windows Server Operating System (mp download)
    Microsoft SharePoint 2010 Products Management Pack for System Center Operations Manager 2007 (mp download)

  • HP Managment Pack for Monitoring Gen8 Server DMS Service can be clustered or not.

    Hello ALL,
    I am trying to configure HP Managment Pack for Monitoring Gen8 Server monitoring and i have encoutered very small problem but it is now a big problem for me. Currently we have deployed one server to monitoring the HP Gen8 Server
    Esx monitoring. But we want to create DR Site where we want to add same devices which will help us to failover when existing server will be down or HP DMC Service is down. Any one have tried this solution please let us know in DR or cluster way.
    Omkar umarani SCOM STUDENT

    Hi,
    If you are looking for SCOM cluster way to monitor Gen8 Server, then we can build multi management servers within the management group, or create multi management groups to monitor Gen8 server.
    More details:
    http://technet.microsoft.com/en-us/library/hh298610.aspx
    And if you are looking for ways to failover HP DMC serice, then I would like to suggest you post in the HP forum.
    Regards,
    Yan Li
    Regards, Yan Li

Maybe you are looking for

  • SSO to SAP R3 thru ITS 6.20 with Logon tickets

    Hi All, I am trying to configure SSO to R3 thru ITS with the Logon Tickets. I have configured R3 to accept the tickets using STRUSTSSO2. Downloaded the verify.der file from Portal and imported to R3 And tried to test the System connection. If I use <

  • Having problems installing iTunes on Windows XP

    Having problems installing iTunes on Windows XP - Error msg "There is a problem with Windows Installer Pkg. A program required for this install to complete could not be run. "  However, it's an iTunes error msg.

  • HP Photosmart Plus b209a prints lines through photos

    The printer is a few weeks old, but it never printed out photos correctly. There are vertical lines through landscape photos, and horizontal lines through potrait photos (this happens when I'm connected both via USB and wireless). The strange thing i

  • Industry sector of the Material

    Hi there! Do we have any way out to find out the 'Industry Sector' for the material (irrespective of any material type) which is already created and available in the system. Ex: Material - XYZ - Is created in the system a year back. I want to know th

  • Trying to report an Adobe error with hopes to fix it

    I have a Payroll service who uses Adobe.  When I print the checks the line on the bottom of the checks show alphabet letters along with the routing and account numbers, instead of special characters.  After many hours online and on the phone with my