Windows clients

I have a standalone OSX 10.4.9 Server configured for File (AFP and WIndows) and OpenDir The overview is as follow: (standalone server, Lookup Running, Netinfo local only, Ldap stopped. Password Server running, and Kerberos stopped.
Some windows clients connect fine other can't get past the login. It's baffling. I don't see anything in the log for user that can't get past the login.
any ideas?

Hi Damon
I have a standalone OSX 10.4.9 Server configured for
File (AFP and WIndows) and OpenDir The overview is as
follow: (standalone server, Lookup Running, Netinfo
local only, Ldap stopped. Password Server running,
and Kerberos stopped.
This is a bit confusing? Are you saying that the Server is a Standalone for Windows Services? OpenDir is misleading as this usually means that it is providing LDAP services but you state that LDAP is stopped as well as Kerberos so I guess it can’t be OpenDir, can you be a bit more specific?
Some windows clients connect fine other can't get
past the login. It's baffling. I don't see anything
in the log for user that can't get past the login.
any ideas?
Clients that cant get past the log in – are these new clients? Have you tried logging in with the same account information as clients that can successfully log in?
Just a few questions

Similar Messages

Cisco Jabber for Windows Client SDK

Is there an SDK for Cisco Jabber for Windows client? I could only find the Web SDK. Are there no other SDKs that would let me control features of the Jabber Windows Client?

And in order to avoid TAPI limitation, they say they have started using Jabber which controls all phone functionalities through an Application User connected to the Call Manager.
Assuming they are referring to the normal Jabber for Windows/Mac/iOS/Android applications then this is wrong. Jabber - the client, not the IM&P servers which are part of the CUCM cluster (if you're familiar with Lync consider CUCM+IM&P servers a Front End Pool) - do not use an Application User at all. When a user starts Jabber, assuming SAML SSO is off, they supply an email address. This is used to find the servers via DNS SRV records, or the Mobile and Remote Access Expressway (roughly analogous to a Lync Edge pool) to tunnel through the firewall. After the email address they are prompted for their End User username and password. This is then used to access several APIs on the server, namely the User Data Service to discover what the user has. This would include what the user has configured/available to them. After this is done the Jabber client does one of three things with respect to phone functionality:
If the user has no phone devices provisioned for them - physical or software - it becomes an IM&P client only.
If the user has a software phone phone provisioned, it registers as that using SIP. In this way Jabber is the actual phone. This is called a CSF device for Jabber Windows/OS X.
If the user has a desk phone assigned to their End User account AND administrative policy is to default to desk phone control, it registers to CTI Manager on the CUCM server to control the user's physical phone.
A user can toggle between option two and three, if appropriately provisioned, but cannot have both simultaneously. In other words, Jabber is either controlling a physical phone over CTI or is a phone itself using SIP. The difference is where the audio/video media is sent from/to.
All of this happens using that human's End User credentials.
Now, if you wanted to have a server control the user's phone - either a physical one or Jabber - you would use the TSP as an interface to CTI Manager on the CUCM server and receive real-time events (e.g. the user went off-hook, the phone is ringing with this caller ID, etc.) and issue commands to that phone (e.g. make a call to X). This is done using an Application User account because the server would need to do this for multiple users simultaneously. If you also use the Super Provider concept, the CUCM administrator doesn't have to take the extra step of associating every phone to your Application User manually. Instead, you can simply issue CTI subscriptions to see any/all device activity you want.
This is all assuming you wanted to do the integration server-side to avoid having to update the Cisco TSP application on every user PC (which also limits your WPF application to machines capable of running the TSP) every time the CUCM administrator patches the servers. If you don't care about that, then you can do this all client-side on the user's PC, and have them supply their End User credentials.
Of course, you could also reconsider the Jabber SDK and just embed the make/receive call functionality directly into your application instead.

Please fix: Common Open File Dialog Box to support Favorites (Follow-up: Better provisioning in the Windows client)

One more thing:
What's missing is favorites is a way to use the favorites space in the Common Open File Dialog Box.
Please obsolete or (re)develop components in Windows, so those components support any new workflows in Windows!
On example of an application where you cannot use Favorites is Adobe Photoshop. It uses the Common Open File Dialog Box in Windows (which does not support Favorites).
Comparing Finder (MacOS) with Windows Explorer - you "seem" to have the option of using favorites to pin folders.
Well, if your application calls Windows to use the Common Open File Dialog Box - it's actually NOT POSSIBLE AT ALL to navigate to the user concepts (user folders) pinned to favorites.
Again, the favorites namespace is completely unused (not provisioned) out-of-the-box. That's may be ok, however it's not fully implemented across Windows and just another example of stuff accumulating up to being unusable.
What's missing is favorites is a way to use the favorites space in the Common Open File Dialog Box.
Ref.: Better provisioning in the Windows client
https://social.technet.microsoft.com/Forums/en-US/dbb2102f-00b7-47ca-88f2-4f88cd9d3409/followup-starting-launching-and-switching-?forum=WinPreview2014Feedback#2aba34e9-6074-4750-8f66-425bdeacc705
https://social.technet.microsoft.com/Forums/en-US/168bb9f9-ab18-42e6-9f20-5e36e71f742c/merging-the-task-bar-and-the-start-screen-area?forum=WinPreview2014Feedback#168bb9f9-ab18-42e6-9f20-5e36e71f742c
https://social.technet.microsoft.com/Forums/en-US/59a5bb6a-0368-4f34-bea4-b9811ac0bf8c/dont-forget-development-of-the-start-screen-remember-virtualization-of-it-too-purpose-is-hud?forum=WinPreview2014Feedback#59a5bb6a-0368-4f34-bea4-b9811ac0bf8c
https://social.technet.microsoft.com/Forums/en-US/c10168fe-a534-44aa-a0ec-e9defc71da5f/better-provisioning-in-windows-client-remember-templates-for-the-start-screen-like-the-need-for?forum=WinPreview2014Feedback#c10168fe-a534-44aa-a0ec-e9defc71da5f

Congrats to Carmelo!
Windows Phone and Windows Store Apps Technical Guru - February 2015
Carmelo La Monica
Windows Phone 8: control Nokia Maps (Part 3)
JH: "Part 3 of the series how to work with the Nokia maps control. As the previous articles this one contains a lot of code snippets and some pictures. Good work!"
Ed Price: "A great topic, a fantastic breakdown of sections with clear descriptions, and a nice mix of code formatting and helpful images! Another stellar article from Carmelo! Great job including the link back at the end to the portal
article!"
Ed Price, Azure & Power BI Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it!

Using iChat Server with Windows clients in an integrated Active Directory/Open Directory environment

A co-worker (Super Brent) and I were working on using iChat as an internal IM server after having used Openfire for a couple days. The reason for switching was basically that we had a Mac Mini Server that was available so we decided to take this on.
First problem: Knowing whether or not Kerberos was needed for AD/OD integration. We spent a ton of time on this, not knowing a huge amount about AD and with our server administrator on courses, we just kept poking at it and removed Kerberos.
For the AD/OD integration, we first bound the Mac Mini to our Active Directory server. We shut off LDAPv3 support as we only wanted to use the AD functionality. Additionally, we ensured that the search policy in Directory Utility only used Active Directory. Then we created an Open Directory master in the Open Directory service. We enabled a self-signed certificate and trusted it locally. After creating the iChat service, ensure that you use the self-signed SSL Certificate and set authentication to Standard. (no kerberos).
Second problem: Once this was complete, we started to test clients out. We were unable to successfully login using our AD credentials using Spark IM and Pandium IM. After trying nearly 100 different variations of server configs, we decided to try a new client. I installed Miranda IM on my Windows XP machine and tried a few different setups. It turned out that the magic potion was to make sure that the "resource" field was set to "Home" and use SSL for encryption. This resource setting was the deal breaker for the other IM clients as many of them such as Spark and Pandium do not have this as a login option.
We ended up using Pidgin IM as the Windows client of choice as it did have the resource variable and it's interface was the best suited for our environment and users.
I hope this helps someone out there as we spent days looking all over the internet trying to figure this out.
Cheers,
Frenchy and Super Brent

Hi,
iChat Server is not something that I know a great deal about.
I tend to point people to the OS X Server Communities and to look out for posts by Tim Harris.
Thanks for taking the time to post this.
9:58 PM Friday; February 10, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.3)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

ORA-12571 error while creating packages from Windows clients

Hello,
We are facing the ORA-12571 error while creating / replacing packages from Windows Clients connected to a 8.1.7.2.0 db on a Solaris server.
However, there are
1. no errors in connecting and creating transactions from a Sql session
2. no errors in creating / replacing unwrapped/wrapped small (few lines) packages
3. no errors in connecting from a Unix session (remote telnet sessions inclusive).
This happens only when creating wrapped/unwrapped packages, source code of which is greater than 500 kb approx.
Can somebody help me resolve this issue. Any Help would be greatly appreciated.
Regards.
Lakshmanan, K

Update: I had unintentionally left my custom tablespace in READONLY state after an earlier experiment with transportable tablespaces. After putting the tablespace back into READ WRITE mode and creating a new template, I was successfully able to create a new db from the template.
I'm still a little curious why this procedure wouldn't work properly with a READONLY tablespace, however.
Ben

Windows client error joining with Samba 4.2 Active Directory server

I have a basic samba 4.2 ADC setup on CentOS 7 and I get a RPC server not available whenever I attempt to join a windows client to the domain. The smb.conf is default on created during provisioning. All indicated pre-testing seems to work as expected. The windows client finds the domain and recognizes a valid user or not but the last step of joining the domain ends with the error "Unable to join the Domain RPC server not available. Does anyone have any ideas?
Thanks Paul
This topic first appeared in the Spiceworks Community

I have a scenario for you in active directory when two passwords may be valid:
Old passwords can also work on domain controllers that have not received replication yet from either the domain controller the password was changed on, or the PDC emulator in the domain.
Let's take a scenario where we have a 3 site, 3 domain controller (DC) active directory: Site1 with DC1, site2 with DC2 and site3 with DC3.
The ACS application resides in Site3 and is configured to use DC3 for authentication. We have a user "user1" with a password of "123".
User1 decides to call the helpdesk and changes his password to "456".
The helpdesk uses DC1 to make password changes because they are located in site1. For a period of time (based on replication, which defaults to 3 hours between sites) the 123 password and the 456 password will be
valid.
If the user1 user tries the "123" password it will work until DC3 receives the changed password from normal replication. If user1 tries to use 456, DC3 will flag this as a wrong password, and then check the PDC
emulator of the domain to see if it has received a newer password. The PDC emulator will validate the login, and then trigger an immediate replication with DC3.
Regards,
~JG
Do rate helpful posts

SMB Slow connection with upgrade to SnoW Leopard and Windows Clients.

<pre>
Dear,
I have now upgraded my MAC OS X LEOPARD 10,5,8 to new SNOW LEOPARD 10,6,2 and if some problems disappear I have a newer big one !
Now every time a Windows CLient try to connect to a SMB Share of SL server that take a long time about 10-15 seconds to open after that depending on client OS that could be nice for a moment (windows 7 and XP) or browsing stay very slow like for 2003 server connecting to Share on S.Leopard.
Could you please help me.
My SL are the main SMB share computer with all data it is connect like other clients to AD (SBS2003).
I have a SBS2003 server that are Master of Domain
and a Server 2008 acting like Terminal Server also member server of domain.
Here are kind of log I receive from SMBD.LOG: I suppose the Credentials problem when connecting are my explanation but how to avoid that !
2009/11/14 13:37:06, 2, pid=64803 /SourceCache/samba/samba-235/samba/source/smbd/reply.c:reply_special(332)
netbios connect: name1=MACSRV name2=NOMAD
2009/11/14 13:37:06, 2, pid=64803 /SourceCache/samba/samba-235/samba/source/smbd/reply.c:reply_special(339)
netbios connect: local=macsrv remote=nomad, name type = 0
2009/11/14 13:37:08, 2, pid=64794 /SourceCache/samba/samba-235/samba/source/lib/module.c:dosmb_loadmodule(64)
Module '/usr/lib/samba/auth/odsam.dylib' loaded
2009/11/14 13:37:10, 2, pid=64803 /SourceCache/samba/samba-235/samba/source/smbd/sesssetup.c:setupnew_vcsession(1273)
setupnew_vcsession: New VC == 0, if NT4.x compatible we would close all old resources.
2009/11/14 13:37:10, 2, pid=64803 /SourceCache/samba/samba-235/samba/source/lib/module.c:dosmb_loadmodule(64)
Module '/usr/lib/samba/auth/odsam.dylib' loaded
2009/11/14 13:37:18, 2, pid=64803 /SourceCache/samba/samba-235/samba/source/smbd/sesssetup.c:setupnew_vcsession(1273)
setupnew_vcsession: New VC == 0, if NT4.x compatible we would close all old resources.
2009/11/14 13:37:28, 0, pid=64803 /SourceCache/samba/samba-235/samba/source/lib/opendirectory.c:getopendirectoryauthenticator(247)
failed to read DomainAdmin credentials, err=67 fd=15 errno=2
2009/11/14 13:37:28, 0, pid=64803 /SourceCache/samba/samba-235/samba/source/lib/opendirectory.c:opendirectoryuser_auth_and_sessionkey(580)
dsDoDirNodeAuthOnRecordType gave -14091 eDSAuthMethodNotSupported
2009/11/14 13:37:28, 0, pid=64803 /SourceCache/samba/samba-235/samba/source/auth/authodsam.c:opendirectory_smb_pwd_checkntlmv1(387)
opendirectoryuser_auth_and_sessionkey gave -14091 eDSAuthMethodNotSupported
2009/11/14 13:37:28, 0, pid=64803 /SourceCache/samba/samba-235/samba/source/lib/opendirectory.c:getopendirectoryauthenticator(247)
failed to read DomainAdmin credentials, err=67 fd=28 errno=2
2009/11/14 13:37:28, 2, pid=64803 /SourceCache/samba/samba-235/samba/source/auth/auth.c:checkntlmpassword(309)
checkntlmpassword: authentication for user fabrice -> fabrice -> fabrice succeeded
2009/11/14 13:37:28, 2, pid=64803 /SourceCache/samba/samba-235/samba/source/lib/module.c:dosmb_loadmodule(64)
Module '/usr/lib/samba/vfs/darwin_streams.dylib' loaded
2009/11/14 13:37:28, 2, pid=64803 /SourceCache/samba/samba-235/samba/source/lib/module.c:dosmb_loadmodule(64)
Module '/usr/lib/samba/vfs/darwinacl.dylib' loaded
2009/11/14 13:37:28, 2, pid=64803 /SourceCache/samba/samba-235/samba/source/lib/module.c:dosmb_loadmodule(64)
Module '/usr/lib/samba/vfs/notify_kqueue.dylib' loaded
2009/11/14 13:37:28, 1, pid=64803 /SourceCache/samba/samba-235/samba/source/smbd/service.c:makeconnectionsnum(1092)
nomad (192.168.2.20) connect to service NetDown initially as user fabrice (uid=501, gid=20) (pid 64803)
I also have some kind of following message:
2009/11/14 13:35:18, 0, pid=64579 /SourceCache/samba/samba-235/samba/source/lib/utilsock.c:readdata(534)
read_data: read failure for 4 bytes to client 192.168.2.20. Error = Connection reset by peer
NOte that initialy I don't have problem with MAC OS Client but to be sure they use SMB I have desactived AFP server on SNOW LEOPARD SERVER and now they can't browse the share in finder but when connection via COMMAND+K and SMB://server/share that give now the same error but a little bit faster than windows clients.
Could you help me to troubleshout that problem ?
Thanks for your help.
Felee
</pre>

Dear CarlosGBA,
So when you put 2 computers of your network in WORKGROUP in place of DOMAIN the 38 others works fine ? Strange ?
I have about 15 computers, some are already in workgroup other are linux smb other MAC, the data server are MAC OS X SL, the problem appear for all windows machines, I have try to dissable NTLMV2 and Kerberos since it is probably the faulty element with opendirectory,but always without success !
I don't know what I can do to trouble shout, I hope next release 10.6.3 come soon and correct about all SMB problem ! Probably a dream only ! Since I ask my self if Apple want to correct something andwhy is this problem let without solutionso long ! For a company it is a big problem.I suppose that Apple never read this forum and never answer our problem ! May be I should contact the support phone to be helped !
Thanks for you help.

File Transfer From Unix server to Windows Client System Using WebUtil

Hi all,
I want to Transfer a File from Unix Server to Window Client System using Webutil. But below mention code is not working.
DECLARE
     V_Server_Path VARCHAR2(500) := Null;
     V_Client_Path VARCHAR2(500) := Null;
BEGIN
     V_Server_Path := '/proj/oraapps/viper/dev/reports/cache/Saveauftr.txt';
     V_Client_Path := 'C:\Migration\EU_Applications\Lima\OAS_WorkArea\Client\Saveauftr.txt';
     IF WebUtil_File_Transfer.Is_AS_Readable(V_Server_Path) THEN
     IF WebUtil_File_Transfer.AS_To_Client(V_Client_Path,V_Server_Path) THEN
          Message('Downloading the File ..... .... ... .. .');
          Message('Downloading Was Successfull ...');
          Message('File Transfer from Server Was Successfull ...');
     END IF;
END IF;
END;
Can anyone suggest me,Why the above code is not working and what to do for solve the Problem.
Regards
Gany

Hello,
You have more chances to get an answer in the Oracle Forms OTN Forum :
Forms
Regards

Windows client intermittent connection to PEAP WIFI backed off to ISE 1.2 wildcard cert

I am setting up a topology whwere for the first time I am deplying ISE with a wildcard certificate. This is on ISE 1.2 patch 6, WLC's running 7.6 and Windows 7 clients in AD. The ISE policy is just to match on machine auth.
The setting up of the wildcard cert went ok as guided by the CCO ISE 1.2 deployment/cfg guide.
When it came to testing the client auth as always I start off with the PEAP settings of Validate server certificate off, just to confirm the WLC and ISE are playing ball. They were, the auth passed.
I then tick the Validate server certificate, make sure the CA (Windows AD) is in the Trusted Root Certification Authorities. Retest and the client passes.
If I then disconnect the wifi and reconnect, either manually or by doing a reboot, the next authenticaiton fails, but nothing has changed. ISE reports that my Windows client rejected the server certificate. Which is odd as it just accepted it.
If I untick the validate the client passes, if i tick it again it will authenticate fine, once. The next connection it will fail again with the client rejecting ISE.
Anyone got any ideas?

I have had a similar issue consistently with 1.2 on both pathc 5 and 6 (not sure about earlier one). Basically what I am seeing is the client rejecting the Server cert when validate is unticked. Most of the time the client connects just fine a few seconds later but some clients need a reboot to fix it. As a rule I put this down to client issue but not 100% sure some times.

Quicktime on Windows clients can't open files in folders with long names!!

Hi,
we've got a really strange problem. We have an Intel Xserve with Leopard Server 10.5.4 which is sharing files over SMB. Everything works fine, except Quicktime on Windows clients (XP Pro and Vista). It looks like the length of the folder names is the problem. If a single folder in the path to the mov has a name that's longer than 8 characters, Quicktime fails with "Error -43: A file could not be found."
x:\test1234\test.mov works
x:\test12345\test.mov doesn't work
Same for UNC paths. VLC on Win and Quicktime on OS X work without problems over SMB. Also the problem doesn't exist on other Samba based fileservers.
Any ideas? Perhaps some smb.conf tweaks to fix this?
Best regards

Just found this post
http://discussions.apple.com/thread.jspa?threadID=1360461&tstart=0
Seems like a well known problem

HOW TO: EDIT IN PLACE ON WINDOWS CLIENT

Hi everybody,
I work in TIBA (broadcaster company), we use FCS so much and I have a problem, actually i have running edit in place on XSAN for MAC clients, but i cant work of the same way on windows.
We have XSAN and fiber channels working.
I configure the device but it doesn´t work.
Somebody, help me please. My email is [email protected]
Kind regards
Emiliano

Hi,
No iam not using stornext for the windows clients.
The mac and windows clients running on ethernet. The the mac clients have mapped the xsan volumes using AFP or SMB protocol and the edit in place works ok.
The windows clients have mapped the xsan volumes through SMB but the edit un place doesnt work, the files are cached and doesn´t run as edit in place.
Note: sorry by my english.
kind regard.
Emiliano
Are you using StorNext FX to add the Windows clients to your Xsan? If so, then all you have to do is add the Windows Edit-in-place URI to each EIP device in the Devices section of the Java client Admin GUI (not the System Preferences pane). Once you've done that, EIP will work for the Windows clients as well. Here are the instructions for entering the correct URI syntax.
If you are not using StorNext FX for your Windows clients, please give us more detail on how your system is set up.

Problem with national characters on windows client

Hello there,
I'am having problem with national characters on windows client.
All national data stored in NVARCHAR2 colums, applications (.net) works fine,
but in sqlplus:
select city from test_table;
- everything ok, sqlplus shows national characters
select dump(N'<national symbols>') from dual
- returns
Typ=96 Len=12: 0,191,0,191,0,191,0,191,0,191,0,191
select * from test_table where city = N'<national symbols> '
- always returns nothing
As i understand the problem in
sql query text (and national literals) convertion
to servers "WE8ISO8859P1" encoding, Is it possible
to solve the issue?
Thanks in advance
PS.
Console in right mode (chcp=1251)
sqlplus shows russian messages well
Server (oracle 9 on solaris):
select * from nls_database_parameters
NLS_NCHAR_CHARACTERSET AL16UTF16
NLS_SAVED_NCHAR_CS WE8ISO8859P1
NLS_LANGUAGE AMERICAN
NLS_TERRITORY AMERICA
NLS_CURRENCY $
NLS_ISO_CURRENCY AMERICA
NLS_NUMERIC_CHARACTERS .,
NLS_CHARACTERSET WE8ISO8859P1
NLS_CALENDAR GREGORIAN
NLS_DATE_FORMAT DD-MON-RR
NLS_DATE_LANGUAGE AMERICAN
NLS_SORT BINARY
NLS_TIME_FORMAT HH.MI.SSXFF AM
NLS_TIMESTAMP_FORMAT DD-MON-RR HH.MI.SSXFF AM
NLS_TIME_TZ_FORMAT HH.MI.SSXFF AM TZH:TZM
NLS_TIMESTAMP_TZ_FORMAT DD-MON-RR HH.MI.SSXFF AM TZH:TZM
NLS_DUAL_CURRENCY $
NLS_COMP BINARY
NLS_LENGTH_SEMANTICS BYTE
NLS_NCHAR_CONV_EXCP FALSE
NLS_RDBMS_VERSION 9.2.0.6.0
Client (windows server 2003, oracle client 10):
NLS_LANG = RUSSIAN_CIS.CL8MSWIN1251

N'<national symbols>', being part of an SQL statement, will be converted to the database character set (WE8ISO8859P1) before being parsed. Only if the client and the database are both 10.2 or higher, the client can encode the literal appropriately so that it survives this conversion.
In earlier versions, you can do the encoding yourself. Instead of the N'<national symbols>' literal use the UNISTR function: UNISTR('\xxxx\yyyy\zzzz'), where U+xxxx, U+yyyy, U+zzzz are Unicode code points of your national characters.
-- Sergiusz

Can't establish VPN on windows client to OSX server

Hi everyone,
I'm stuck for a while now with a very annoying problem.
I can't establish a VPN connection on a windows client to a OSX Server. It worked fine while we had OSX server 10.6.
We recently updated to 10.8 and got this problem.
I know some of u are now thinking, the solution is: Just don't use windows... But the director of the company i am doing this for
doesn't want to switch to mac.
Also, this problem maybe be related to windows but i hope someone here can help me.
Things i've done:
I've tried PPTP ( didn't work either )
I've tried different users
I've tried adding a rule te regedit in windows ( according to a windows vista kb file for VPN trough NAT devices )
I've tried different authentication rules
In VPN log is Server admin everything goes well until:
pppd[87435]: fatal signal 6
vpnd[104]: --> Client with address 192.168.0.24 has hungup
after this it goes further with some successes.
I hope someone here knows the solution!
Thanks in advance,
Remy
Mac mini server, 10.8.5
server admin 2
( client ) windows 7 & 8
ps. sorry for my bad grammer, i'm dutch..

You could have a look at the following and see if it helps.
http://support.apple.com/kb/HT5078

10g export error on windows client

Hi Friends
I tried to run 10g windows client exp (export database backup)
on my 10g database residing on IBM AIX 5L...but i got the following
error:
EXP-00056: ORACLE error 6550 encountered
ORA-06550: line 1, column 41:
PLS-00302: component 'SET_NO_OUTLINES' must be declared
ORA-06550: line 1, column 15:
PL/SQL: Statement ignored
EXP-00000: Export terminated unsuccessfully
Any help pls....thanks a lot

What version of the exp client are you running and against what version of the database?
Make sure you use the exp command that matches with the database version that you are trying to export from.

Oracle 10g EE Windows Client on different machine than Pracle 10g EE server

I downloaded the Oracle 10g EE Windows Client and installed it on a WinXP (SP3) machine that had no Oracle components installed. The idea was to use it to connect to an Oracle 10g EE database running on another machine on the network.
After installing the software, what I find in the start menu is:
Oracle Client 10g Express Edition
- Go To Online Forum
- Read Documentation
- Register For Online Forum
- Run SQL Command Line
When I "Read Documentation" and go to the "Getting Started" link it talks about other menu options which I can't find ("Go To Database Home Page").
Clearly something isn't working here, but what?
Pete

This option is available on server. Not on client.
Use following link instead:
http://<server_ip_address>:8080/apex/

OWB 10g Release 1, version 10.1.0.3, windows client download

Hi,
I am looking for the windows client for the OWB version 10.1.0.3. I am not able to locate the software download anywhere in the Oracle website, could not locate the archive location from where I could download older versions if any.
Any help locating the download in oracle site or in any other means is appreciated.
Thanks in advance,

Thanks for your response...
Yeah, I have a client running 10g R1 version 10.1.0.3 server and the only client installed windows machine crashed and they are using the client on the server. It would be very useful if they could have the windows client for that specific version.
We are also doing a fresh install of OWB 10.2.0.5 on a new server and trying to create the repository and import the .mdl project backup from the prod server (OWB 10.1.0.3).

Windows clients

Similar Messages

Maybe you are looking for