Windows conacts option missing....help

am running desktop v4.6 ans wanted to sync my windows contacts but that option is missing. i have tried v4.7 n v5.0 and they all have windows contact option missing from. i only have oulook,yahoo and ascii. any help. thanks

The option won't show up on the list. Once you have checked SMB File Sharing, that will enable sharing your files with Windows computers. You don't need to do anything else after that.

Similar Messages

"This window only" option missing from Show View Options

Hi,
When trying to create a background image for a disk image for distribution, the radio button for "This window only" is missing. I read instructions on the web on how to set the background image, make the file invisible in the Terminal. It will work on the 10.6 system that created it, but will not show on another computer. (Mac OS does not matter)
I eventually had to do this on an old system with Tiger 10.4 . There when looking at View Options, the radio button is there labeled 'This window only' . I created the disk image and voila' it will keep the background image for any other computer.
So my question is - Is there a keyboard combination to set this? This option is missing in 10.5 and 10.6 . This is really frustrating.
TIA

I'm experiencing the same problem. However, I don't think it's defaulting to an arbitrary colour. Rather, it seems to be defaulting to the exact opposite colour (than whatever colour was selected) in the spectrum.
For example, if I set the background colour of a folder to red, it instead defaults to green (and vice versa). This is consistent for all opposing colours.
I hadn't clued into Crayons being different — thanks!
BlackBook Mac OS X (10.4.9) 2GB memory. 120GB hard drive.

Imovie window and options missing

In imovie from today I have only 2 windows instead of 3 and no access to options transitions, titles, musics...on the left bottom side of the screen on my current project
if I create a new project I have the 3 windows and access to the options?!
could you help me
the apple hotline says that it is not a technical problem...
thanks for your help

Update to my previous post: I'm still quite unfamiliar with iMovie 11. I was accessing video clips that were imported into the Library, and trying to edit them, to no avail. I needed to click on "All Projects", and select the equivalent Project to be worked on. When I selected a project, the "Content Library" including "Transitions" appeared in the lower left corner. I can then drag video clips down to the lower left of the screen and assemble and edit them, including placing of transitions.
Bob A.

Multicam Program Window camera options missing

Hello all.
I am using multicam for the first time. All has been well for a few hours but now the different camera views that I click on in the program window have disappeared so I can no longer perform live switching. The current selected view in a larger frame to the right still remains. I can still change the camera view for a clip using the source window but that's no use for live switching.
I have tried clicking on the spanner icon and checked that 'multicam' is selected.
I have tried deleting plists, repairing permissions and rebooting but no joy.
I am using Premiere Pro CC v8.1.
Any suggestions would be greatly appreciated.
Duncan.

I have tried Adobe live chat and got a solution.
Multi-camera editing doesn't like custom layouts.....which is ironic because, by definition, a multi-camera shoot is going to generate a lot of footage to organise.
If you set up a new project with a standard screen layout and use only one monitor then import your old project into this new one, multi-camera works again.
I have also learned that audio offset does not work if you sync video via audio and AME won't render a multi-cam sequence, I have to render from the sequence itself.
I have gone back the old way of editing 3 layers of video. It's so much faster than trying to figure out the multi-camera bugs!

I'm getting an error message on Windows 8. Missing apple application support. Itunes will not install. Please help!!, I'm getting an error message on Windows 8. Missing apple application support. Itunes will not install. Please help!!

I'm getting an error message on Windows 8. Missing apple application support. Itunes will not install. Please help!!, I'm getting an error message on Windows 8. Missing apple application support. Itunes will not install. Please help!!

You probably need to either uninstall and reinstall itunes or to download the apple application support by itself
you can download the itunes http://www.apple.com/itunes/ here
then to do a complete uninstall / reinstall follow these instructions http://support.apple.com/kb/ht1923
you could also use 7zip to extract the individual installer for apple application support from the itunes setup file http://www.7-zip.org

Personal hotspot option missing from my ipad , please do help me fix this problem

why is the personal hotspot option missing from my ipad ?

Personal hotspot is only on the iPad 3rd generation and higher and the iPad mini, not avail on the iPad 2. Heres the information from apple about the personal hotspot http://support.apple.com/kb/ht4517

J4500 all in one; windows 8.1; missing Solutions Center

HP JP4500 all in one printer; Windows 8.1; used Solutions Center on old computer; missing from new. Can't fax or scan as easily without it. Please help. I have a dial-up on my printer.

Hi @86needhelp, thanks for reaching out to the HP Forums!
I can help you with install the Solution Center on you Windows 8.1. Please download and run the HP Printer Install Wizard for Windows
The HP Printer Install Wizard for Window was created to help Windows 7, Windows 8, and Windows 8.1 users download and install the latest and most appropriate HP software solution for their HP Printer.
Please let me know if this resolves the issue. If you require further assistance, please run the HP Print and Scan Doctor while you wait to hear back from me. Running the Print and Scan Doctor might help. The HP Print and Scan Doctor is a free utility (tool) that helps to quickly resolve common printing, scanning and connectivity issues including but not limited to:
Connectivity:
USB: Verifies that the USB connection from your computer to the HP product is working correctly.
Network: Verifies that the network connection between your computer and your network is working correctly.
Device Status Test: Checks for device errors such as out of paper, paper jams, carriage stalls, and paper feed issues, and then provides instructions for fixing the error.
Driver Check: Checks for missing or corrupt driver files.
Device Manager: Checks for problems in Device Manager that would prevent printing.
Device Online: Checks if the product has been paused or set to offline, and then sets the status back to online if necessary.
Print Queue: Checks for and clears pending print jobs in the print queue (a log of print jobs waiting to print).
Port Match: Checks the port settings for the HP product.
Device Conflicts: Checks for conflicts with other drivers, such as other printer brands.
Ink Issues: Checks the cartridges and ink levels for issues that affect print quality.
Print Settings: Checks and adjusts the print quality settings.
Test Print: Prints a test page for print quality evaluation, and provides options for cleaning and aligning the printhead if necessary.
Scan Tests: Checks the scan mechanism, drivers, and registry entries.
Source:Try the HP Print and Scan Doctor for Windows
Click here to download and run the Print and Scan Doctor> >>>>> www.hp.com/go/tools
If that does not resolve the issue, post back and let me know if there are any symbols other than green check marks and what they are next to of course. The wrench is not always easy to spot as the wrench and the check mart are in the green circle.
If you see only green check marks (), the tool did not find any problems.
If you see green wrenches (), the utility identified an issue and corrected it automatically.
If you see yellow exclamation points (), the test failed and required user action, but the step was skipped.
If you see a red X (), follow the on-screen instructions to resolve the issue.
Thanks, I look forward to hearing back from you.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Headphone & speaker option missing ,only digital output

i am using hp G42 370TU notebook pc , operating system windows 7 (32) .Few day's back my headphone & speaker option missing ,only digital output after staring windows . Speaker option & sound available after restarting the laptop for several times. After this problem i download & installed audio driver from hp.But this problem is not solved. An updated latest antivirus is installed in my laptop. i have tried by re-installing windows.sound appear after rebooting the laptop for seveal times .but again it missed by shut down or sleep or hibernet. i have installed latest & old realtec audio driver available for this laptop.but after starting the windows only digital ouput & the audio driver also missing. At this time the microsoft trouble shooting shows no peripheral speakers or headphone is not connected.please tell me about probable solution for this problem.
This question was solved.
View Solution.

Hi,
As a further test to identify whether this is a hardware or software issue, try the following.
1. Create a bootable Ubuntu CD - a guide on creating an Ubuntu CD and the download can be found Here.
2. When created, follow the guide on the link below to Try Ubuntu.
http://www.ubuntu.com/download/help/try-ubuntu-before-you-install
The 'Try Ubuntu' option runs the OS from the CD without the need to install on your HDD. It will be slow running from a CD but let me know if you get audio.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Custom Repeat Event Option Missing...

Custom Repeat Event Option Missing... ...Option doesn't appear anywhere; my iPad, my iPod Touch, MobileMe (PC flavor)
Anyone... [smile]

Crap... I don't know why I'd missed it... when you double click the event you get the window comes up...In little tiny gray letters first it reads
location
all-day
to
repeat
calendar
etc.....
click on that and get your options for repeating. Hope that helps.

Adobe creative Cloud photshop cs 6 register user iam not getting COPY CSS options please help

iam adobe creative cloud photshop cs 6 register user iam not getting COPY CSS options even i have updated photoshop several times
still not getting this options please help
Thanks
Koushik

13.0.1 is the last version of Photoshop to run on Windows XP but it does not include the Copy CSS feature.
The Copy CSS feature was first introduced in Photoshop 13.1 (Cloud only) and higher.
http://blogs.adobe.com/jkost/2013/02/copy-css-attributes-in-photoshop-13-1.html
Photoshop 13.1 does not run on Windows XP. So your operating system is preventing you from upgrading Photoshop to 13.1+.
http://helpx.adobe.com/photoshop/kb/new-system-requirements-photoshop-131.html
If you plan to remain a Cloud member then you will have to upgrade to Windows 7 or Windows 8 (or get a new computer) very soon in order to run Photoshop CC to be released on June 17, 2013.

TS3297 I keep getting the error 306 cannot connect to the iTunes Network when downloading songs on iTunes. I've tried all the troubleshooting steps from the forums and my technical issues are still unresolved. I have Windows 7. Please help!!

I keep getting the error 306 cannot connect to the iTunes Network when downloading songs on iTunes. I've tried all the troubleshooting steps from the forums and my technical issues are still unresolved. I have Windows 7. Please help!!

iTunes Store loads partially or returns "Error 306" or "Error 10054"
Proxies, parental control settings and software, security or filtering software, or a bad iTunes Store cache can cause this.
To address proxies, Remove Internet Options proxy settings ( http://support.apple.com/kb/TS1490 ) and connect to the Internet without a proxy.
To reset iTunes Store cache:
In iTunes, choose iTunes > Preferences (Mac) or Edit > Preferences (PC).
Click the Advanced tab.
Click the "Reset cache" button.
Click OK and see if the issue is resolved.
Adjust Parental Controls in iTunes:
Open iTunes.
Access iTunes preferences:
On a Mac: From the iTunes menu, choose Preferences.
On a Windows PC: From the Edit menu, choose Preferences.
Click the Parental Controls tab.
Remove restrictions on Parental Controls.
For more information on parental controls or content filtering software, see iTunes 10.5 for Windows: May see performance issues and blank iTunes Store.
http://support.apple.com/kb/TS4123?viewlocale=en_US

I just paid for Adobe PDF pack and I think I am having problems installing. When I select to print from word, PDF is not an option. Help!

I just paid for Adobe PDF pack and I think I am having problems installing. When I select to print from word, PDF is not an option. Help!

Hi voltric2014,
If you are on Windows, you can download and install the CreatePDF Desktop Printer, which would allow you to "print" to PDF from Word. You'll find a link to the installer on the CreatePDF page at https://cloud.acrobat.com. Here are the instructions for installing it: Using Adobe PDF Pack
Please let us know if you have additional questions.
Best,
Sara

"windows" with options keep popping up

Why do "windows" with options keep popping up whenever I try to do something; they are all different, but will be like "Go Back/ Save as" etc. It is so annoying. How do I get rid of it. I tried removing check mark next to Pop Up Windows, but that didn't do it. Help! Thanks!

I thought for sure someone in the Apple Support Community would be able to help me with my problem... however, no one replied (see original question). I then called Apple Support and they too could not answer my inquiry. Yes, I probably did not describe my problem with the correct terminology (I am a retired homemaker and not a computer expert). However, I was determined to figure out why I kept getting these little "boxes" of options... yes, I did not use the right terminology because I didn't know what it was; but I would have thought an Apple Expert could have figured out what I meant.
Apparently I was using my fingers inappropriately on the Trackpad, and the Shortcut Menus kept appearing. Yes, my little boxes, or windows were actually Shortcut Menus. But I did not know that's what they were called... so I explained them as boxes, or windows... but as I said, an Apple expert should have known what I meant, even though I did not use the correct terminology.
Now I had to figure out how to remove this option as I didn't like it. With only 4 months under my belt with this new computer, I am proud to say I found out by going to Preferences/ TrackPad/ and unclicking the box for Secondary clicks resolved my problem... and now I am wondering why I paid extra for Apple Support. I am disappointed in responses from you.

How do i freeze/unfreeze window appearance options?

I'm trying to adapt an open source VI from openg and I can't unfreeze the "Window Appearance" options -- how do I do that?
The hack of copying everything from the block diagram and pasting it onto a new VI works but is problematic, I have to copy the icon and re-wire the connector pane, etcetera.
Attachments:
win_appearance.jpg ‏65 KB

dgholstein wrote:
Jim;
I see someone here is tuned-in to find anything that mentions OpenG!
Well, I'm a big fan, I used your cluster tools to make working with databases easy -- so easy, in fact, that I would go as far as saying that Labview with my SQL libraries using your cluster tools is "The Best Way Ever" to read and write to a database. No other programming language makes it so obvious as when the cluster element names and types match the names and types from the DB.
Is there room/interest to merge another library into OpenG?
...Dan
> I see someone here is tuned-in to find anything that mentions OpenG!
Yep, you caught me.
> I used your cluster tools to make working with databases easy
A long while ago, I posted some example code that uses the OpenG Variant library (oglib_lvdata) to generate a SQL INSERT statement from a cluster, in the way you described. Yes, this is very flexible way to adapt LabVIEW data to a database.
> Is there room/interest to merge another library into OpenG?
There is definitely room and interest in allowing others to help OpenG grow (that's the whole point, right?). We've got high standards and a process (which are not well documented [documentation is not nearly as exciting as writing code, you know]) but we're working on this and love to have participation. If you want, please feel free to send me what you've got so far, and I'd be happy to take a look and see what it would take to get this OpenG'ified. Also, the OpenG Discussion Forums are a great place to share your ideas, feedback, and bug reports -- but of course, all you need to do is say "OpenG" and I'll hear you
Thanks,
-Jim

Window menu is missing in DW CS5 Mac

I need to open the behaviors panel and I can't get to it. My window menu is missing. I have no idea how long it has been missing - I never open new panels. But, now I need it! Help! Here is a screenshot, it should be bestween Site and Help. How can it just disappear??? I have nothing in my prefs that would cause it, I've tried setting the interface with all the choices, nothing. I really need to access the behaviors.

It may not. I wish I still had my MacBook. It makes it difficult troubleshooting from a PC.
Same here. I'm always wary of offering definitive advice to Mac users until I double check my proposed advice online first.
Time for a new MacBook Pro I think :-)

Windows conacts option missing....help

Similar Messages

Maybe you are looking for