Windows could not load installer for volume. Contact your hardware vendor

If you ever get this message itunes will not update your ipod. I was getting this message on my shuffle but not on any other model. Also got the message it couldn't load installer for my mouse. It took a while to find the answer but this corrected it:
Check your C:\Windows\system32 folder for the file syssetup.dll
If it is missing you'll get the above message for some hardware. Search and you should find it under a service pack or similar folder. Copy the dll into the system32 folder. (you may need to reboot). This finally solved the problem and my shuffle works great.

Deleted Itunes, Quicktime, apple mobile support and updater. Reinstalled and it all worked. Had to do the same thing last time. NOT TOO FUN.

Similar Messages

Windows could not load installer for daqdevice

Hello, I have 2 Labpc-1200 Daq cards installed in my Windows 200 SP4 pc. When i load NI-Daq6.9.3 and reboot, i get the following error
"Windows could not load installer for DaqDevice"
I have search the forums and support here withough luck. Here is what i have tried :
Removed all daq, labview software - rebooted reinstalled
removed all registry keys, hklm\software\niationa intruments
Updated pc to SP4
Anyone got any ideas please?

Hi Finto
I have attached a word document and a zip file the word document is a procedure for removing all NI soft ware I know you said you have done this but just to check you haven’t mist anything.
Is there any reason why you are using NI-Daq6.9.3?
There is a link in the attachments for the latest drivers which I would suggest you use them. The latest drivers for Traditional NI DAQ Legacy is 7.4.1 and the latest for DAQmx is 8.
Tim
NIUK AE
Attachments:
msicuu.zip ‏481 KB
remove National Instrument Software.doc ‏25 KB

Device Installer error - Windows could not load the installer Image.

I am windows XP and have loaded new Itunes 7.7 and the Iphone 3G I just received cannot be recognized by my PC/XP I get a dialog box saying
Device Installer Error
Windows could not load the Installer Image. Contact your hardware vendor for assistance.
OK
Of course it is not OK hence why I am here seeking help from this fine community of users of superior Apple products

Deleted Itunes, Quicktime, apple mobile support and updater. Reinstalled and it all worked. Had to do the same thing last time. NOT TOO FUN.

Could not load library for database connection LCA

Hi,
I am facing RFC connection prblem while connectiong to database. I have installed SCM5.1 and live cache in single server
Please find the logs.
Work process log:
B Mon Jul 20 11:19:13 2009
B create_con (con_name=LCA)
B Loading DB library 'E:\usr\sap\SC7\DVEBMGS03\exe\dbsdbslib.dll' ...
M *** ERROR => DlLoadLib: LoadLibrary(E:\usr\sap\SC7\DVEBMGS03\exe\dbsdbslib.dll) Error 126 [dlnt.c       241]
M          Error 126 = "The specified module could not be found."
B *** ERROR => Couldn't load library 'E:\usr\sap\SC7\DVEBMGS03\exe\dbsdbslib.dll'
[dbcon.c      4731]
B ***LOG BYG=> could not load library for database connection LCA        [dbds#1 @ 1035] [dbds    1035 ]
A
A Mon Jul 20 11:21:58 2009
A GENER starting remote generation: /SAPAPO/OM_SYNC_LC_DB (requested by W1).
B
SM21:
No shared library found for the database with ID LCA|
No shared library found for the database with ID LCA
/SAPAPO/OM17|/SAPAPO/OM_SYNC_LC_DB|K |SAP Web AS Problem|SBAC   |
Documentation for system log message BY G :
As well as the standard connection, an attempt was made to set up
another database connection, under the specified ID. The Shared Library
for this second database could not be found.
The Shared Library is usually found in the the Executable
directory (profile parameter DIR_LIBRARY) under the name dbs
<dbs>slib<os_ext>. <dbs> stands for the database type and <os_ext>
stands for the operating system-specific extension of the Shared
Libraries.
The database type is determined from the entry that corresponds to the
specified DB ID in the table DBDCON. Check whether the data in this
entry is correct.
ST22
Runtime Errors         DBIF_DSQL2_CONNECTERR
Exception              CX_SY_NATIVE_SQL_ERROR
Date and Time          20.07.2009 11:22:21
Short text
Error setting up a secondary database connection
What happened?
Connection to database system not possible with identifier "LCA".
|----
System environment
SAP-Release 700
Application server... "
Network address...... "
Operating system..... "Windows NT"
Release.............. "5.2"
Hardware type........ "8x AMD64 Level"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 8
Shortdump setting.... "full"
Database server... "
Database type..... "ORACLE"
Database name..... "SC7"
Database user ID.. "SAPSC7"
Terminal................. " "
Char.set.... "C"
SAP kernel....... 701
created (date)... "Jul 6 2009 23:47:55"
create on........ "NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00"
Database version. "OCI_10201_SHARE (10.2.0.2.0) "
Patch level. 50
Patch text.. " "
Database............. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE 10.2.0.."
SAP database version. 701
Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2, Windows
NT 6.0"
Information on where terminated
Termination occurred in the ABAP program "SAPLSLCAPPS" - in
"LCA_EXISTS_LCA_ROUTINE".
The main program was "/SAPAPO/TS_BATCH_RUN ".
In the source code you have the termination point in line 23
of the (Include) program "LSLCAPPSU05".
The program "SAPLSLCAPPS" was started as a background job.
Job Name....... "MACROS"
Job Initiator.. "SC7GEN"
Job Number..... 10222002
The termination is caused because exception "CX_SY_NATIVE_SQL_ERROR" occurred
in
procedure "LCA_EXISTS_LCA_ROUTINE" "(FUNCTION)", but it was neither handled
locally nor declared
in the RAISING clause of its signature.
The procedure is in program "SAPLSLCAPPS "; its source code begins in line
1 of the (Include program "LSLCAPPSU05 ".
Please help me to resolve the issue.
Suraj

Hi Natalia Khlopina,
I have raised OSS message to SAP.
Below is the information
E:\usr\sap\SC7\SYS\exe\uc\Copy_ of_NTAMD64_15062009>sdbregview -l
Server Utilities    e:/sapdb/programs      7.7.02.08     64 bit    valid
DB Analyzer         e:/sapdb/programs      7.7.02.08     64 bit    valid
PCR 7301            e:/sapdb/programs      7.3.01.21               valid
PCR 7500            e:/sapdb/programs      7.5.00.42     64 bit    valid
SAP Utilities       e:/sapdb/programs      7.7.02.08     64 bit    valid
APO LC APPS         f:/sapdb/lcs/db/sap    6.00.004      64 bit    valid
Redist Python       e:/sapdb/programs      7.7.02.08     64 bit    valid
Base                e:/sapdb/programs      7.7.02.08     64 bit    valid
JDBC                e:/sapdb/programs      7.6.03.02               valid
Messages            e:/sapdb/programs      MSG 0.5010              valid
ODBC                e:/sapdb/programs      7.7.02.08     64 bit    valid
SQLDBC 77           e:/sapdb/programs      7.7.02.08     64 bit    valid
Database Kernel     f:/sapdb/lcs/db        7.7.02.08     64 bit    valid
Loader              e:/sapdb/programs      7.7.02.08     64 bit    valid
SQLDBC              e:/sapdb/programs      7.7.02.08     64 bit    valid
SQLDBC 76           e:/sapdb/programs      7.6.01.15     64 bit    valid
Fastload API        e:/sapdb/programs      7.7.02.08     64 bit    valid
C:\Documents and Settings\sc7adm>disp+work
disp+work information
kernel release                701
kernel make variant           701_REL
compiled on                   NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00
compiled for                  64 BIT
compilation mode              UNICODE
compile time                  Jul 6 2009 23:47:55
update level                  0
patch number                  50
source id                     0.050
supported environment
database (SAP, table SVERS)   700
                              701
operating system
Windows NT 5.0
Windows NT 5.1
Windows NT 5.2
Windows NT 6.0
Thanks for quick responce.
Suraj

Having problem purchasing credit on my apps.....giving me an error message that my purchase could not be completed for assistance contact itune support

having problem purchasing credit on my apps.....giving me an error message that my purchase could not be completed for assistance contact itune support

If you haven't already done so, then to do so as the message says and contact iTunes Support (these are user-to-user forums) :
- go to http://www.apple.com/support/itunes/ww
- click on your country's flag
- click on the Contact Support at the bottom of the left-hand column
- click on Contact iTunes Store Support on the right-hand side of the page
- then Purchases, Billing & Redemption

Hi there, i erased my macbook and trying to reinstall it, i keep getting an error message"could not find installation for this machine" please what can i do?

Hi There,
I erased my macbook and trying to reinstall it, i keep getting an error message "could not find installation for this machine" what must i do please?

It is the internet connection.
Try again or another internet connection.

I have a problem I'm trying to buy in a particular application, but show me a message as the picture We have allowed the purchase of applications and still show me message " your purchase could not be completed " for assistance contact itunes

I have a problem I'm trying to buy in a particular application, but show me a message as the picture We have allowed the purchase of applications and still show me message " your purchase could not be completed " for assistance contact itunes

Then do as the message says and contact Apple
ITUNES SUPPORT BILLINGS etc
http://www.apple.com/emea/support/itunes/contact.html or https://expresslane.apple.com/Issues.action

Every time i want to buy something it tells me could not be completed for assistance contact itunes support help me plz????

every time i want to buy something it tells me could not be completed for assistance contact itunes support help me plz????

If you haven't already done so then you can contact iTunes support via this page and ask them why the message is appearing (these are user-to-user forums, we won't know why) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then try selecting Purchases, Billing & Redemption

HT1933 Hello, I can not buy the Interior in-app purchases, says that I turned to Sapport.Pliz help me! Here's Your Purchase Could not be Completed.For assistance.contact Itunse Support

Hello, I can not buy the Interior in-app purchases, says that I turned to Sapport.Pliz help me! Here's Your Purchase Could not be Completed.For assistance.contact Itunse Support

These are mainly user-to-user forums, you can contact iTunes support via this page and ask them why the message is appearing (we won't know why) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then try selecting Purchases, Billing & Redemption

Please help I cannot buy anything in AppStore I'm here in Dubai it says YOUR PURCHASE COULD NOT BE COMPLETED FOR ASSISTANCE, CONTACT ITUNES SUPPORT Help me please I need to buy something please asap

Please help I cannot buy anything in AppStore I'm here in Dubai it says YOUR PURCHASE COULD NOT BE COMPLETED FOR ASSISTANCE, CONTACT ITUNES SUPPORT Help me please I need to buy something please asap

Click here and request assistance.
(84901)

HT201272 your purchase could not be completed for assistance contact itunes support

Hi I play "clash of clans" and I want to buy gems but it show a pop message "your purchase could not be completed for assistance contact iTunes support at www.apple.com/support/itunes/we." Can you help me to solve it. Thanks
<Email Edited by Host>

To Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

HT204074 your purchase could not be completed for assistance contact itunes support at

i cant by gem on castle clash game
when i want to buy gem this massage appear (your purchase could not be completed for assistance contact itunes support at
please help me to solve problem

Have you considered doing exactly what it told you to do?
Contact itunes support

Missing/empty symbols, "Could not load scene into memory. Your document may be damaged." CS6

Hey folks,
we've been getting this problem a lot. We had it in Flash CS5.5 and still have it CS6.
We're animating a series in Flash and this problem keeps cropping up way to often, but seems totally random.
Basically I'll be working on a .fla saving regular versions through out the day, no problems. I'll close the file down. Then I (or someone else on a different computer) will open it up and I'll get the error msg "Could not load scene into memory. Your document may be damaged." Everything will be fine except for a few missing graphic symbols. Sometimes just the one, sometimes a whole bunch. So where the symbol should be on the stage, instead you get a small white square, but it still contains the animation information. So it will still move about the stage. If I bring in the same symbol from an old scene I can swap them out and the problem is fixed, (until it does it again on a totally different graphic symbol).
If i select the symbol in the library the preview is white/blank and i can't go into it to edit. When I select the symbol on the stage, the "instance of:" gives me a blank "_ _ _" in the properties tab. How ever if i right click show in library it does show me the correct (although broken as in blank) symbol in the library.
I havent been able to reproduce this problem on purpose but I'd say it happens in roughly one scene out of 10. Its seems to happen at random, I know there must be something in common but i havent figured out what. Its going on in heavy scenes (large library multipule characters), lite scenes (just the one character). Its not like it happens to the same symbol, different ones each time. Everything is local to the scene, all elements are created in flash. We are working across a network but as everything is local to the scene i don't see how that would be a problem. Also we don't have duplicate named symbols. It also won't necessarily affect something that has been changed since the last version. could be a background element thats been there, untouched since the first version of the scene.
One point on how we set up our scenes which may be relevant. Start with empty scene, copy and paste symbols from other scenes to populate. Save.
The problem could appear on say version 4 or version 36. Older versions are usually fine.
So to sum up. Flash file is fine when we save it, open it up again later and a symbol will have disappeared. It's happening far too often.
I know how to fix the problem, thats not what I'm asking. I need to know WHY its doing it so we can stop this from happening in the first place.
Phew! Thanks for reading this far. Any help would be highly appreciated.
Sander/

Can you elaborate on how you use the network? Are you working from FLA/XFLs stored on a machine across a network (and saving them across the network)? I had plenty of those issues and Adobe has always warned not to work across a network. I just fell into the habit of copying over what I need to work on locally, then updating the file servers at the end of the day. Nothing was corrupt after that.
Also lately in CS5.5 (not CS6 yet) I had noticed that I could change some graphics assets, close the document in OS X and open in Windows only to find freshly updated graphics reverted back. What's even more odd is if the OS X machine that made the changes opens it the changes are still made. This happens vice versa as well. My only solution on that was not to work cross-platform with other machines on a network unless absolutely necessary.

Flash Pro CC saved fla project - "Could not load scene into memory. Your document may be damaged."

Hi all, I've been working on a project in Flash Professional CC in windows 7 that was started in a previous version of Flash Pro and occasionally after I've saved the project and tried to open it the next day I get the "Could not load scene into memory. Your document may be damaged." message and only a blank Scene 2 in the project. I've previously been reverting back to the old saved project file and starting over. Its wasted a lot of time so far.
I can still open the same exact project in CS6 on another older computer but not in CC. I can also save the fla in CS6, transfer it to the other computer and then it will work again (for now). This isn't going to be an option in the future as CS6 was a trial version that is on its last use today.
I've tried to create a new flash pro cc project and just copied and pasted the library and scene layout from the old project into the new project. This worked for a couple of saves/ opens but the error has happened again. I'm scared that now that I've reached the point in the project were my work in the animation/ visual side will start to be more intensive that I will continuosly have to worry about losing all of my work. I'm using a document class so the AS3 code hasn't been an issue thankfully. Any help would be appreciated.

Thanks for the reply Amy, that is essentially what I am doing already only I'm not using version control software I'm just managing it on my own since its a solo project, though I have been considerring using git anyway. It still doesn't explain why I can open and save the supposedly damaged project (according to CC) in CS6 and only then will it work again in CC. Also I'm not gettting a chance to save as a new version over and over for long. Its only a couple of days max, usually just over one day, and I've primarily been working on the code in Flash Builder with little functional change in the actual fla project. Its primarily changing movieclips instance names, which in this project is tedious and time consuming. Having to revert back to the older working version is exaclty what I'm trying to avoid. I shouldn't have to commit the project to a repository every little change that I make to the fla file.

"Windows could not start because of a computer disk hardware configuration problem. "

My hp mini notebook 100-300 is continues reboot, i have done format os and try to install window xp thorough bootable pendrive, after finished installation, system is restart as show message as " "Windows could not start because of a computer disk hardware configuration problem. Could not read from the selected boot disk. Check boot path and disk hardware. Please check the Windows documentation about hardware disk configuration and your hardware reference manuals for additional information."
so please help me what i do next...........

AmitNandha wrote:
My hp mini notebook 100-300 is continues reboot, i have done format os and try to install window xp thorough bootable pendrive, after finished installation, system is restart as show message as " "Windows could not start because of a computer disk hardware configuration problem. Could not read from the selected boot disk. Check boot path and disk hardware. Please check the Windows documentation about hardware disk configuration and your hardware reference manuals for additional information."
so please help me what i do next...........
Here's the problem XP will not install and work correctly that is why your getting that message.....Stay with the O/S that came with the laptop if you want to have stability in software and hardware operations.
I am a Volunteer to help others on here-not a HP employee.
Replies aren't online 24/7 because of Time Zone differences.
Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

Windows could not load installer for volume. Contact your hardware vendor

Similar Messages

Maybe you are looking for