Windows could not search for new updates after applied June 2014 Windows Updates - Error code 80244004

After applied June 2014 Windows Updates from Microsoft (Not using WSUS server to obtain WU), our Windows Server 2012 R2 and Windows Server 2008 now getting this error message when we perform the "Check for Updates":
Windows could not search for new updates. Error code 80244004.
Richard

Hi Richard,
Just addition, please refer to following KB to reset Windows Update components and monitor the result.
How do I reset Windows Update components?
If didn’t use ESET security software, please also refer to following thread and check if can help you.
Latest
version of Windows Update causing error 80244004
Hope this helps.
Best regards,
Justin Gu

Similar Messages

"Windows could not complete the installation" after restoring Lenovo T61 to factory settings, help!

Hi everyone;
I recently tried to restore T61 laptop to factory settings and I received the message "Windows could not complete the installation. To install windows on this computer, restart the installation". I used Dr. Google to see if I could fix the problem; but unfortunately after re-starting multiple times, restoring to factory settings (after changes to the Administrator account as well as "Oobe" settings, in any number of combinations); I still get the same error message. Any thoughts? I'm attempting to reinstall Windows Vista Business. I do apologize I'm not a computer person so if you need any additional details please let me know; thanks in advance!

Hi,
It may be a good idea to run a couple of hardware tests.
Shut down the notebook.
Tap away at the esc key as you start the notebook to enter the Start-up Menu. Select the Diagnostic Menu option ( f2 ) and run the tests on the Hard Drive and Memory.
If you get any error messages/codes, post back with the details.
If the tests pass, you can order a replacement set of Recovery Discs starting on the link below - the cost does vary a little depending on where you live, but they're generally inexpensive.
Order HP Recovery Media.
If you have any problem with this link, see if you can order this directly from HP.
If you live in the US, contact HP Here.
If you are in another part of the world, start Here.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Mail not checking for new mail after sleep

Mail will not check for new mail when waking from sleep unless I log off and back on first. I tried quitting Mail, which works once in a while. I tried putting all Accounts back online, which works occasionally. But most often nothing works except logging off. Must I change to another mail program, or is there a better solution.

After trying various solutions, I found that the fault was not with Apple Mail or my iMac but with Airport taking time to warm up after sleep. I switched to an Ethernet connection instead and it works fine now

Leopard-Searching for new drivers: Canon iP5000

I have recently installed Leopard. When I try to print I get a box stating that no printer is selected. I go to Add Printer . . . and another window pops up with a list and there is my Canon iP5000/USB. When I select it I get a message in the window that says "searching for new drivers" and the spinning gear goes for awhile and then just blinks. I tried installing the Canon driver update from Nov but that did not work. Can anyone help me?

I had the exact same problem, although my printer is an iP1500. I tried everything listed here, except the Gimp drivers, to no avail.
When the spinning gear froze on the Add Printer window, I opened the Activity Monitor, double clicked on the Add Printer process and listed open files. I realized that there were a lot of open EPSON driver files. I found this strange, since I have no EPSON printers anywhere in my network. I assumed that something else was interfering with the driver search process.
I solved the problem by doing the following:
- sudo mv /Library/Printers /Library/Printers_Orig
- mkdir /Library/Printers
- chmod 775 /Library/Printers
- mv /Library/Printers_Orig/Canon/ /Library/Printers/
In essence, the above instructions remove everything except the Canon drivers from the location which the Add Printer application uses to search. When I tried again, the correct driver was almost immediately loaded.
My guess is that the Add Printer application searches everything in the Printers directory and that some other driver (EPSON maybe?) is either corrupt or conflicts somehow with the Canon printer. By leaving only the relevant drivers, the problem goes away.

BLACK SCREEN stating "windows could not start because the following is miss

I installed Bootcamp update 2.1 and then XP SP3.
Now when I start up my Mac I am getting a BLACK SCREEN stating "windows could not start because the following is missing or corrupt: <windows root>\system 32-hal.dll Please re-installl a copy of hte above file"
I tried to use the option key and insert the Windows CD but it won't start up.
Also, when I start up I must use the option key and select the Mac OS and it will start up and everything is fine there. Advice appreciated.

Did you ever solve this? I had updated to BC 2.1 (After updating Apple Software Update al on the Windows side) I waited & just tonight tried to install SP-3. It appeared to install & When I was prompted to restart--I also got the black screen. Mine said:
Windows could not start because the following file is missing or corrupt:\Windows\inf\biosinfo.inf
You can attempt to repair the file by starting Windows setup using the original setup CD-ROM. Select ‘r’ at the 1st screen to repair.
I just force powered off & booted into Mac.
I think I need to restart my Mac into Windows (using the Option key ) WHILE THE WINDOWS XP CD is in the optical Drive. Then maybe I’ll get a choice to select ‘r’ to repair at the 1st screen?
You may need to do essentially the same thing. I do not know if this problem is a boot camp problem of just a Windows problem.
Sure is annoying,
Good luck!

Windows could not start the Network Location Awareness service on Local computer

i have a dell inspiron 1501 laptop running windows vista home premium media center edition. i have recently been getting an error when trying to view networked computer saying "connection status: unknown" and "the dependency service or group failed to start". i started by disabling and re-enabling the driver and that did not help. i then brought up the services.msc thing and started looking at the networking services. i noticed that the Network Location Awareness service was not started so i tried to start it. i got a popup message saying "Windows could not start the Netwrok Location Awareness service on Local Computer. Error 0xc000096: 0xc0000096".
i also get an error popup when i try to start the Network List service saying "Windows could not start the Network List Service service on Local Computer. Error 1068: The dependency service or group failed to start".
what might i have done to make this happen and what can i do to try to fix it?
haus

Hi,
Thank you for the post.
I fully understand the inconvenience the issue has been caused and the current situation can be frustrating. Please try the following steps for troubleshooting.
1. Please start the computer in Safe Mode with Network and check the result. If the issue disappears, please perform a clean boot.
For the detailed steps, please refer to the step 1 and 2 in the KB article 936214 (http://support.microsoft.com/kb/936214).
2. If the issue persists, please check the system file by using the command SFC /scannow.
For more information, please refer to the KB article 929833 (http://support.microsoft.com/kb/929833).
If the above suggestions do not resolve the issue that service fails to start up, please understand that debug and dump analysis may be required for further troubleshooting. Also, in most cases, it is necessary to check the source codes. However, debugging is out of our forum’s support boundary. A support call to our product service team is needed for the debugging service. In this case, I’d like to suggest contacting Microsoft Customer Support Service (CSS) for assistance so that this issue can be resolved efficiently.
To obtain the phone numbers for specific technology request, please check the website listed below:
http://support.microsoft.com/default.aspx?scid=fh;EN-US;PHONENUMBERS
Thank you for your understanding.
Sincerely,
Joson Zhou
Microsoft Online Community Support

June 2014 Muse Update Fail

I've tried to update to the June 2014 Muse update. I sign in at Adobe and click on download. The window says the file is downloading, but nothing happens, I've tried using Firefox and Safari. not sure what else to do.
Also, I'm not sure what the AAR window is prompting me to do. It says to pick an application, but I'm not sure what application to pick. I chose Muse (since I am updating that application), but that just sent me back to the original Muse update window to start all over again.
I am on OSX 10.9.3
Is anyone else having this problem?

Me Too,
It's really grating me that there seems no response from adobe, I would have expected they produce a troubleshooting guide for common problem's regarding loading new updates, but hey ho there you go ! maybe i'm missing it

Windows could not start after SP-3 update

Windows could not start after SP-3 update
After I updated Apple Software Update to 2.1 and then updated to BC 2.1 successfully I D/L & Installed SP-3. Even got the Wizard & seemed to go OK. Got prompt “Installation Complete, Need to restart.” I did. I got a black screen with text:
Windows could not start because the following file is missing or corrupt:\Windows\inf\biosinfo.inf
You can attempt to repair the file by starting Windows setup using the original setup CD-ROM. Select ‘r’ at the 1st screen to repair.
I used the power button to shut down Windows & then booted into Mac OS X normally.
I think I need to restart my Mac into Windows (using the Option key ) WHILE THE WINDOWS XP installation CD is in the optical Drive. Then maybe I’ll get a choice to select ‘r’ to repair at the 1st screen?
Has anyone done this with a similar error & successfully repaired their Windows installation? I don’t know if this is a Boot Camp problem or not. XP SP 2 had been working just fine.
Thanks for any help.

Solved! It apparently was NOT a Boot Camp Issue. The fix was to obtain the file “biosinfo.inf” and from the Mac side, go into my WIndows XP HDD & add that file to: Windows/INF folder. (Yes, it was missing). Why my XP SP2 installation worked fine w/o this file is beyond my knowledge. Perhaps this file is needed only when doing a type of major update yet not needed for simply starting & running Windows? There are web pages stating that upgrading to SP 3 can cause this problem if using 3rd party software such as Norton Anti-Virus (I don’t have that but DO have Zone Alarm). There are also various complicated, long fixes out there. For me, replacing that file did the trick & everything seems fine now. (As far as where one “obtains” that file--long story)
Message was edited by: growler62000

I purchased field runners for iPad, but after I backed up and updated to ios5, I could not find it

I purchased field runners for iPad, but after I backed up and updated to ios5.01, I could not find it and when I went to the apps store, it shows that I have to purchase it. What do I do? Tks

Contact iTunes
http://www.apple.com/support/itunes/contact/

Windows could not start DBConsole for new database instance

Hi,
I am getting this error "Windows could not start the OracleDBConsoleOracleInstance2 on Local Computer. For more information, review the System Event Log. If this is a non-Microsoft service, contact the system vendor, and refer to service-specific error code 1".
I installed Oracle 11g on Windows 7 and created my 1st database instance (oracleInstance1) successfully with a listener and service configured. I could access this database using DBconsole URL: https://hostname:1158/em.
I see the services started for:
OracleDBConsoleOracleInstance1
OracleOraDb11g_home1TNSListener
OracleServiceOracleInstance1
Next, I created a second database instance (oracleInstance2) and have configured a new service for this database. I am using the same listener as I intend to use one database instance at any point of time.
However, I got this warning message during configuration:
"Enterprise manager configuration succeeded with the following warning - Error starting Database Control. Please execute the following command(s).
1. Set the environment variable ORACLE_UNQNAME to Database unique name.
2. C:\Oracle\product\11.2.0\dbhome_1\bin\emctl.bat start dbconsole"
To start the new database console, I stopped the previously running DBConsole, OracleDBConsoleOracle1 and started the new DBConsole OracleDBConsoleOracle2 and get the above error.
When I try to start dbconsole manually using "emctl dbconsole start", it starts OracleDBConsoleOracle1 instead.
I changed environment variables ORACLE_SID=oracle2 and ORACLE_UNQNAME=oracle2
What am I missing here. Please help!
Thank you.

968952 wrote:
Hi,
I am getting this error "Windows could not start the OracleDBConsoleOracleInstance2 on Local Computer. For more information, review the System Event Log. If this is a non-Microsoft service, contact the system vendor, and refer to service-specific error code 1".
I installed Oracle 11g on Windows 7 and created my 1st database instance (oracleInstance1) successfully with a listener and service configured. I could access this database using DBconsole URL: https://hostname:1158/em.
I see the services started for:
OracleDBConsoleOracleInstance1
OracleOraDb11g_home1TNSListener
OracleServiceOracleInstance1
Next, I created a second database instance (oracleInstance2) and have configured a new service for this database. I am using the same listener as I intend to use one database instance at any point of time.
However, I got this warning message during configuration:
"Enterprise manager configuration succeeded with the following warning - Error starting Database Control. Please execute the following command(s).
1. Set the environment variable ORACLE_UNQNAME to Database unique name.
2. C:\Oracle\product\11.2.0\dbhome_1\bin\emctl.bat start dbconsole"
To start the new database console, I stopped the previously running DBConsole, OracleDBConsoleOracle1
Why?
and started the new DBConsole OracleDBConsoleOracle2 and get the above error.
When I try to start dbconsole manually using "emctl dbconsole start", it starts OracleDBConsoleOracle1 instead.
I changed environment variables ORACLE_SID=oracle2 and ORACLE_UNQNAME=oracle2
What am I missing here. Please help!First thing you are missing is showing us what you did. Instead you just described it, and that leaves a lot of room for questions. Copy and paste from a command prompt can work wonders here.
From a command prompt, enter the following:
set ORACLE_SID=oracle2
set ORACLE_UNQNAME=oracle2
set | sort
net start
emctl start dbconsolecopy the entire session, commands and full responses, and paste back here.
>
Thank you.Just to take a side road ...
"I am using the same listener as I intend to use one database instance at any point of time. "
Doesn't' matter if you use one instance or 100. The listener was DESIGNED to service multiple instances of multiple versions running from multiple homes. It is nothing but a connection broker. A telephone switchboard, if you will. All you need is a single listener, with the default name of LISTENER, running on the default port of 1521. It will handle all the database instances you care to throw at it. More instances than anyone in their right mind would ever put on a single server. Your server will run out of capacity to host additional instances before the listener runs out of capacity to service them. Especially since your 'server' is really just a toy in the Oracle world.

Windows Could Not parse or process unattend answer file for pass [specialize] after WDT Litetouch 'sysprep and capture'

I setup an ACER VM6620G (Win7x86) how I wanted, including disabling the administrator account and creating an administrator user "PVA"
Navigated to \\wds\DeploymentShare$\Scripts and ran the litetouch script. Chose my "Sysprep and Capture" task.
Everything went off without a hitch until I restarted the technician pc.
I got the dreaded
"Windows could not parse or process unattend answer file [C:\windows\Panther\unattend.xml] for pass [specialize]. A component or setting specified in the answer file does not exist"
I tried to deploy the captured image to the same computer and got the same error
I've scoured the internet for solutions (Shift+10 opens command prompt. Good to know!) with no luck.
I've saved the unattend.xml and looked for errors- going as far as to install an x86 Win7 virtual machine to validate the unattend.xml file in WISM
Other information that might be useful:
I never used WISM to create an unattend.xml nor did I attach one to the image.
I didn't try to copy user profiles/settings/migrate etc
I imported the captured image to WDT. Created a standard task and added 2 nodes
-Inject Drivers
-Install Application
As a side, I've got another image that I've already injected the drivers/installed the application as a test. Everything went smoothly.
+-----------------+
| Unattend.xml:
+-----------------+
<?xml version="1.0" encoding="utf-8"?>
<unattend xmlns="urn:schemas-microsoft-com:unattend">
<settings pass="windowsPE">
<component name="Microsoft-Windows-Setup" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State">
<ImageInstall>
<OSImage>
<WillShowUI>OnError</WillShowUI>
<InstallTo>
<DiskID>0</DiskID>
<PartitionID>2</PartitionID>
</InstallTo>
<InstallFrom>
<Path>\\10.0.0.1\deploymentshare$\Operating Systems\ACER Win7 x86 Capture\ACER Win7 x86 Capture.wim</Path>
<MetaData>
<Key>/IMAGE/INDEX</Key>
<Value>1</Value>
</MetaData>
</InstallFrom>
</OSImage>
</ImageInstall>
<Display>
<ColorDepth>16</ColorDepth>
<HorizontalResolution>1024</HorizontalResolution>
<RefreshRate>60</RefreshRate>
<VerticalResolution>768</VerticalResolution>
</Display>
<ComplianceCheck>
<DisplayReport>OnError</DisplayReport>
</ComplianceCheck>
<UserData>
<AcceptEula>true</AcceptEula>
</UserData>
</component>
<component name="Microsoft-Windows-International-Core-WinPE" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<SetupUILanguage>
<UILanguage>en-US</UILanguage>
</SetupUILanguage>
<InputLocale>0409:00000409</InputLocale>
<SystemLocale>en-US</SystemLocale>
<UILanguage>en-US</UILanguage>
<UserLocale>en-US</UserLocale>
</component>
</settings>
<settings pass="generalize">
<component name="Microsoft-Windows-Shell-Setup" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<DoNotCleanTaskBar>true</DoNotCleanTaskBar>
</component>
</settings>
<settings pass="specialize">
<component name="Microsoft-Windows-UnattendedJoin" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State">
<Identification>
<JoinWorkgroup>WORKGROUP</JoinWorkgroup>
</Identification>
</component>
<component name="Microsoft-Windows-Shell-Setup" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State">
<ComputerName>PVA-PC</ComputerName>
<RegisteredOrganization>PVA</RegisteredOrganization>
<RegisteredOwner>PVA</RegisteredOwner>
<TimeZone>"Eastern Standard Time"</TimeZone>
<DoNotCleanTaskBar>true</DoNotCleanTaskBar>
</component>
<component name="Microsoft-Windows-IE-InternetExplorer" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<Home_Page>about:blank</Home_Page>
<IEWelcomeMsg>false</IEWelcomeMsg>
</component>
<component name="Microsoft-Windows-Deployment" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<RunSynchronous>
<RunSynchronousCommand wcm:action="add">
<Description>EnableAdmin</Description>
<Order>1</Order>
<Path>cmd /c net user Administrator /active:yes</Path>
</RunSynchronousCommand>
<RunSynchronousCommand wcm:action="add">
<Description>UnfilterAdministratorToken</Description>
<Order>2</Order>
<Path>cmd /c reg add HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System /v FilterAdministratorToken /t REG_DWORD /d 0 /f</Path>
</RunSynchronousCommand>
<RunSynchronousCommand wcm:action="add">
<Description>disable user account page</Description>
<Order>3</Order>
<Path>reg add HKLM\Software\Microsoft\Windows\CurrentVersion\Setup\OOBE /v UnattendCreatedUser /t REG_DWORD /d 1 /f</Path>
</RunSynchronousCommand>
</RunSynchronous>
</component>
<component name="Microsoft-Windows-International-Core" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<InputLocale>en-US</InputLocale>
<SystemLocale>en-US</SystemLocale>
<UILanguage>en-US</UILanguage>
<UserLocale>en-US</UserLocale>
</component>
<component name="Microsoft-Windows-TapiSetup" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<TapiConfigured>0</TapiConfigured>
<TapiUnattendLocation>
<AreaCode>""</AreaCode>
<CountryOrRegion>1</CountryOrRegion>
<LongDistanceAccess>9</LongDistanceAccess>
<OutsideAccess>9</OutsideAccess>
<PulseOrToneDialing>1</PulseOrToneDialing>
<DisableCallWaiting>""</DisableCallWaiting>
<InternationalCarrierCode>""</InternationalCarrierCode>
<LongDistanceCarrierCode>""</LongDistanceCarrierCode>
<Name>Default</Name>
</TapiUnattendLocation>
</component>
<component name="Microsoft-Windows-SystemRestore-Main" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<DisableSR>1</DisableSR>
</component>
</settings>
<settings pass="oobeSystem">
<component name="Microsoft-Windows-Shell-Setup" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State">
<UserAccounts>
<AdministratorPassword>
<Value></Value>
<PlainText>true</PlainText>
</AdministratorPassword>
</UserAccounts>
<AutoLogon>
<Enabled>true</Enabled>
<Username>Administrator</Username>
<Domain>.</Domain>
<Password>
<Value></Value>
<PlainText>true</PlainText>
</Password>
<LogonCount>999</LogonCount>
</AutoLogon>
<Display>
<ColorDepth>32</ColorDepth>
<HorizontalResolution>1024</HorizontalResolution>
<RefreshRate>60</RefreshRate>
<VerticalResolution>768</VerticalResolution>
</Display>
<FirstLogonCommands>
<SynchronousCommand wcm:action="add">
<CommandLine>wscript.exe %SystemDrive%\LTIBootstrap.vbs</CommandLine>
<Description>Lite Touch new OS</Description>
<Order>1</Order>
</SynchronousCommand>
</FirstLogonCommands>
<OOBE>
<HideEULAPage>true</HideEULAPage>
<NetworkLocation>Work</NetworkLocation>
<ProtectYourPC>1</ProtectYourPC>
</OOBE>
<RegisteredOrganization>PVA</RegisteredOrganization>
<RegisteredOwner>PVA</RegisteredOwner>
<TimeZone>"Eastern Standard Time"</TimeZone>
</component>
<component name="Microsoft-Windows-International-Core" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<InputLocale>en-US</InputLocale>
<SystemLocale>en-US</SystemLocale>
<UILanguage>en-US</UILanguage>
<UserLocale>en-US</UserLocale>
</component>
</settings>
<settings pass="offlineServicing">
<component name="Microsoft-Windows-PnpCustomizationsNonWinPE" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<DriverPaths>
<PathAndCredentials wcm:keyValue="1" wcm:action="add">
<Path>\Drivers</Path>
</PathAndCredentials>
</DriverPaths>
</component>
</settings>
</unattend>

https://skydrive.live.com Here's the end of the log file:
2013-03-27 17:39:05, Info 2013-03-27 17:39:05, Info 2013-03-27 17:39:05, Info 2013-03-27 17:39:05, Info 2013-03-27 17:39:05, Info 2013-03-27 17:39:06, Info 2013-03-27 17:39:06, Info 2013-03-27 17:39:06, Info 2013-03-27 17:39:06, Error 2013-03-27 17:39:06, Error 2013-03-27 17:39:06, Info 2013-03-27 17:39:06, Error 2013-03-27 17:39:06, Error 2013-03-27 17:39:06, Info 2013-03-27 17:39:06, Info 2013-03-27 17:39:06, Info 2013-03-27 17:39:06, Info 2013-03-27 17:39:06, Info 2013-03-27 17:39:06, Info 2013-03-27 17:39:06, Error 2013-03-27 17:39:06, Info 2013-03-27 17:39:06, Info Also, here's my [Settings]
Priority=Default
Properties=MyCustomProperty
[Default]
SkipDomainMembership=YES
DomainAdmin=Administrator
DomainAdminDomain=go.local
DomainAdminPassword=************
SkipTimeZone=YES
TimeZone="035"
TimeZoneName="Eastern SkipLocaleSelection=YES
KeyboardLocale=en-US
UserLocale=en-US
UILanguage=en-US
Bootstrap.ini:
[Settings]
Priority=Default
[Default]
DeployRoot=\\10.0.0.1\Dep UserID=Administrator
UserDomain=go.local
UserPassword=***********
KeyboardLocale=en-US
SkipAdminPassword=YES
SkipProductKey=YES
SkipBitLocker=YES /redir?resid=55C3109D61329D02!108&authkey=!AG793wDwQuFZa1s
CMI CBS_Core_Finalize:Calling cbs core finalize complete
CMI Callback_CMI_ConfigInstall: CBS startup processing re-run complete.
[0x030023] CMI Callback_CMI_ConfigInstall: Exit.
[setup.exe] UnattendSearchExplicitPath: Found unattend file at [C:\windows\Panther\unattend.xml]; examining for applicability.
[setup.exe] UnattendSearchExplicitPath: Found usable unattend file for pass [specialize] at [C:\windows\Panther\unattend.xml].
IBS Callback_Unattend_InitEngine:Using unattend file found at [C:\windows\Panther\unattend.xml].
[setup.exe] ValidateSMIPass: serialized settings stream; status 0x00000000
[setup.exe] ValidateSMIPass: construct settings context; status 0x00000000
[setup.exe] SMI data results dump: Source = Name: Microsoft-Windows-IE-InternetExplorer, Language: neutral, ProcessorArchitecture: x86, PublicKeyToken: 31bf3856ad364e35, VersionScope: nonSxS, /settings/IEWelcomeMsg
[setup.exe] SMI data results dump: Description = Setting is not defined in this component.
[setup.exe] ValidateSMIPass: load SMI settings; status 0x00000001
[0x060432] IBS The provided unattend file is not valid; hrResult = 0x80220001
[0x060565] IBS Callback_Unattend_InitEngine:The provided unattend file [C:\windows\Panther\unattend.xml] is not a valid unattended Setup answer file; hr = 0x1, hrSearched = 0x1, hrDeserialized = 0x0, hrImplicitCtx = 0x0, hrValidated = 0x1, hrResult = 0x80220001
IBS UnattendErrorFromResults: Hit an unattend error; dumping any info we have about the failure...
IBS UnattendDumpSetting: ------Unattend setting error / warning------
IBS UnattendDumpSetting: Error code = 0x80220001
IBS UnattendDumpSetting: Pass = specialize
IBS UnattendDumpSetting: --------------------------------------------
IBS UnattendErrorFromResults: Error text = Windows could not parse or process unattend answer file [C:\windows\Panther\unattend.xml] for pass [specialize]. A component or setting specified in the answer file does not exist.
[0x0600c2] IBS Callback_Unattend_InitEngine:An error occurred while finding/loading the unattend file; hr = 0x1, hrResult = 0x80220001[gle=0x00000490]
IBSLIB PublishCriticalError: Publishing blocked message [Windows could not parse or process unattend answer file [C:\windows\Panther\unattend.xml] for pass [specialize]. A component or setting specified in the answer file does not exist.]
This installation is blocked from completing due to compliance failures or invalid input; this is not an internal error.
customsettings.ini as I think it changes the unattend?
Standard Time"
loymentShare$

Windows Could not find the Driver for your Apple iPod USB Device (5G 30GB)

I have a 8GB iPod Nano. My roommate has a 30GB 5G Video. Black.
My iPod syncs flawlessly. His is not recognized by Windows or iTunes. Every time we plug in the iPod, it prompts us for the driver. I tried to install the update apple mentions through the windows process, but after going through the tedious Windows Genuine Verification process, I was told that the update didn't apply to my computer.
We use a Lenovo Thinkpad T60p, which shipped with Windows Vista Business.
We are running iTunes 7.3.1.3, and there are no windows updates available for the computer.
I have...
...reset
...reinstalled 7.3.1.3 (over and over and over)
...tried different USB ports. (Early on, we saw it once after swapping ports).
...tried turning off the ability of the computer to 'Turn this device off to save power."
I have also verified that the iPod works on my work Dell Lattitude D620 running XP, and that it's not the cord, as we've used the cord that came with my Nano as well.
So, the problem seems to be with vista, as many people seem to have had. The best thread I found that deals with this was http://discussions.apple.com/thread.jspa?threadID=995793.
But even after having tried everything, I still have an unrecognizable iPod.
When I run iPod diagonostics, everything seems okay, except for the iPod connection, which says failed. I've had difficulty working with the iPod service under Computer/Device Manager - it doesn't ever seem to stop or start, with the iPod plugged in or not.
And interestingly enough, the FAT32 external harddrive that I use to back up my data exhibits exactly the same problem ("Windows could not find the driver for your USB Mass Storage Device). This device worked great in XP, and even odder, I have a FAT32 partition of the main HD as a swap space between my VistaOS and my Ubuntu installation.
Do I have to chalk this up to another issue with Windows Vista? What bothers me there is that you're a ping-pong between windows support and apple support - no one really owns up the problem.

Bill, I've been stuck in this loop for 3 months since buying a new laptop with Vista Basic. I've tried everything to no avail. I don't know what else to do apart from buying a cheap PC running XP. Let me know if you manage to find a solution and I'll do the same.
Regards. Adam

I have using I phone 5c after connected with my HP elite book 6930p laptop, Automatic software driver is not deducting, and display Windows found driver software for your device (MTP USD Device) but encountered an error while attempting to install it.

I am using I phone 5c after connected with my HP elite book 6930p laptop, (Installed Window 7 32 bit). automatic software driver is not deducting, and display Windows found driver software for your device (MTP USD Device) but encountered an error while attempting to install it.
I did install itunes and update also. but the above problem still same.
Kindly give me solution of it. awaiting.
Regards
Abbas Kader

try it with another computer to check if it shows up
if so
uninstall all apple software
reboot
use regedit to search and remove all itunes keys
reboot
resinstall apple software
if non of that helps then try another cable
if that don't help could be your phones connector is damaged

Getting "Windows could not parse or process the unattend answer file for pass [specialize]" with IE10 integration? Read this...

Hey guys,
I just discovered an issue with using MDT to integrate Internet Explorer 10 into Windows 7 & 2008 R2 image files. Building the images was no problem at all, but when I tried to deploy them it would bomb with this error every time:
"Windows could not parse or process the unattend answer file for pass [specialize]."
So a very annoying and cryptic error to say the least. Obviously the issue was with the unattend.xml file that gets auto-generated by MDT, but all the items under "specialize" had worked just fine when I built the image and the IE version
was the only item that had changed. After comparing the Windows 7 & Server 2008 R2 unattend.xml files to my Windows 8 & Server 2012 unattend.xml files (because they have IE 10 native) I discovered that the following flag was missing
from the Windows 8 & Server 2012 unattend.xml files:
<IEWelcomeMsg>false</IEWelcomeMsg>
So I simply commented it out like so:
Re-ran my test deployment and viola, 100% successful with zero errors. I was a little embarrassed/annoyed that this took me so long to track down, then I realized others might be struggling with this too so thought I'd share.
Hope my time spent saves someone else some grief!

I know the last reply was from a couple weeks ago, but honestly, I haven't been able to find anything else in the last week of searching Google. I'm new to the MDT process but I'm having the same issue with what you posted. I can shift-F10 during the "Applying
system settings" and open my unattend.xml file and remove the IEWelcomeMsg line and the image deploys perfectly, so I know that's my problem. I can't figure out where that line is coming from. I have edited every unattend.xml file in the Templates folder under
MDT and also the one in my deployment task sequence, but somewhere during that deployment, that one setting gets added back to the unattend file and nukes the whole image. I'm about to pull my hair out. I'm implementing MDT to save time but I feel like the
last couple of weeks trying to get it to work have been a waste. I have thought about backing my reference image back to IE9, but having to deploy IE10 post image seems like it's an unnecessary burden. Any help would be appreciated.
~Adam

Windows could not update the computer's boot configuration. via UEFI installation

I recently performed a clean WIndows 8.1 installation using my new Hard drive. However, under UEFI mode from BIOS, everytime the setup process reaches the "Installing Updates" stage, I kept on receiving an error "Windows could not update the
computer's boot configuration, Installation cancelled.
I was a bit puzzled as everytime I install Windows 8.1 via LEGACY mode from BIOS, setup finishes! I cannot tell whether I need to mod my BIOS or what.
please help.
raymund r

Hi,
Please make sure that Delete all partitions/volumes on the disk # (ex: Disk 0) that you want to install Windows 8.1 as UEFI on until that disk # shows as unallocated space.
Try again to install Windows 8.1 again.
If it still fails, please post back the setuperr.log and setupact.log under C:\$WINDOWS.~BT\Sources\Panther\ for our research. You can copy them out in WinPE command mode.
Also, I would like to check if you use bootcamp to install Windows 8.1 on Mac computer. If so, check the solution here:
https://discussions.apple.com/thread/5491283?tstart=0
Please Note: Since the website is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Kate Li
TechNet Community Support

Windows could not search for new updates after applied June 2014 Windows Updates - Error code 80244004

Similar Messages

Maybe you are looking for