Windows could not start because the following file is missing or corrupt. Windows root\system32\hal.dll.
Windows could not start because the following file is missing or corrupt. Windows root\system32\hal.dll. anyone can help
Have a read here http://support.microsoft.com/kb/314477/en-us
Maybe it helps
Stefan
Similar Messages
-
windows could not start because the following file is missing or corrupt <Windows root>\system32\hal.dll.
then it says please re-install a copy of the above fileAny system or sys32 and any .dll files missing or corrupted errors, usually the only fix is to reinstall windows and anything on hard drive not saved on removable drives...flash, usb, cd or floppy is lost. I've had several sys32.dll file missing or corrupted errors and asked at Best Buy Geek Squad what the fix would cost and that's how I learned the only fix is installing windows.
-
Windows XP could not start because the following file is missing or corrupt - message
Hi there and apologies in advance if this is a daft or very frequently asked question.
Upon trying to boot up this Toshiba mini NB200 device last night we got this message:
Windows XP could not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM. it then asked me to press r at the forst screen to start a repair if I have the original set up cd.
The device had to be forced to shutdown previously as it hung when shutting down.
Now multiple reboots (including uncoupling/recoupling the battery) and resetting the settings from start up menu result in the same error message.
The device has no cd drive installed but previously Jerry Lippey (in 2011) saved the day by recommending purchase of a product recovery disc (R10804EN) after a 'flashing cursor issue' at logon.
Has anyone far more clever than I any thoughts (if we're able to borrow a portable cd drive) whether this disc may work again?
Windows XP was/is preinstalled on the PC (we havent the disc) and we've subsequently added MS Works. A total wipe of the device (as long as XP remains?) wont be too much hassle as we havent any data that we're too bothered about on it.
Many, many thanks in advance
Solved!
Go to Solution.Toshiba NB200-11L
Windows XP could not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM
Bad news. It means the System hive, which is the most important branch of the registry, is corrupt. Unless you have made provisions for this (we always do on XP systems), the fix is too complex for you to handle (KB307545).
I'm afraid you'll need to restore the hard disk to its original out-of-the-box contents using Toshiba recovery media as you did before. Do you have important files to rescue?
-Jerry -
Hi there...
did anyone of you guys manage to run WinXP on a Mac running Leopard (Boot camp 2.0)? I couldn't, trying to do whatever i could- repairing boot.ini according to Microsoft's support site, reinstalling Windows again and again, even copying Windows files from an existing Windows-running machine to the Boot camp partition, nothing helped...
Any suggestions what i should do?
thanx in advanceThere is a longer thread developing here.
http://discussions.apple.com/thread.jspa?messageID=5860087
My last post had some good info, here is a repost:
Emerging Info! Apparently there are files in windows that disable the means which we are supposed to format the disk. Two of these file names found so far are UNATTEND.TXT and WINNT.SIF. Some computers may have one or the other files located in the \I386 directory of you XP cd. Apparently there is a way to fix the problem my recopying your XP disc to a new CD and deleting the file out. There are directions on one of the links which I am currently following but have not finished.
http://episteme.arstechnica.com/eve/forums/a/tpc/f/8300945231/m/511003928831
http://www.macosxhints.com/article.php?story=20071028054744236 -
BLACK SCREEN stating "windows could not start because the following is miss
I installed Bootcamp update 2.1 and then XP SP3.
Now when I start up my Mac I am getting a BLACK SCREEN stating "windows could not start because the following is missing or corrupt: <windows root>\system 32-hal.dll Please re-installl a copy of hte above file"
I tried to use the option key and insert the Windows CD but it won't start up.
Also, when I start up I must use the option key and select the Mac OS and it will start up and everything is fine there. Advice appreciated.Did you ever solve this? I had updated to BC 2.1 (After updating Apple Software Update al on the Windows side) I waited & just tonight tried to install SP-3. It appeared to install & When I was prompted to restart--I also got the black screen. Mine said:
Windows could not start because the following file is missing or corrupt:\Windows\inf\biosinfo.inf
You can attempt to repair the file by starting Windows setup using the original setup CD-ROM. Select ‘r’ at the 1st screen to repair.
I just force powered off & booted into Mac.
I think I need to restart my Mac into Windows (using the Option key ) WHILE THE WINDOWS XP CD is in the optical Drive. Then maybe I’ll get a choice to select ‘r’ to repair at the 1st screen?
You may need to do essentially the same thing. I do not know if this problem is a boot camp problem of just a Windows problem.
Sure is annoying,
Good luck! -
"Windows could not start because of a computer disk hardware configuration problem. "
My hp mini notebook 100-300 is continues reboot, i have done format os and try to install window xp thorough bootable pendrive, after finished installation, system is restart as show message as " "Windows could not start because of a computer disk hardware configuration problem. Could not read from the selected boot disk. Check boot path and disk hardware. Please check the Windows documentation about hardware disk configuration and your hardware reference manuals for additional information."
so please help me what i do next...........AmitNandha wrote:
My hp mini notebook 100-300 is continues reboot, i have done format os and try to install window xp thorough bootable pendrive, after finished installation, system is restart as show message as " "Windows could not start because of a computer disk hardware configuration problem. Could not read from the selected boot disk. Check boot path and disk hardware. Please check the Windows documentation about hardware disk configuration and your hardware reference manuals for additional information."
so please help me what i do next...........
Here's the problem XP will not install and work correctly that is why your getting that message.....Stay with the O/S that came with the laptop if you want to have stability in software and hardware operations.
I am a Volunteer to help others on here-not a HP employee.
Replies aren't online 24/7 because of Time Zone differences.
Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015- -
HT201210 the iphone could not restored because the firmware file is not compatible
this my qeustion ?
the iphone could not restored because the firmware file is not compatibleGenerally a sign that the iPhone has been hacked or modified
to work with other than the original wireless carrier or an attempt
was made to return to a version of iOS earlier than the version
currently installed on the iPhone.
Google may provide some direction, but discussion of hacked
iPhones is prohibited by Terms of Service for this forum. -
AutoConfig could not successfully instantiate the following files
Dear Gurus,
We have just migrated to Autoconfig on DB tier and after running the autoconfig on DB tier we are getting the following error:
[AutoConfig Error Report]
The following report lists errors AutoConfig encountered during each
phase of its execution. Errors are grouped by directory and phase.
The report format is:
<filename> <phase> <return code where appropriate>
[INSTANTIATE PHASE]
AutoConfig could not successfully instantiate the following files:
Directory: /volora/oracle9/app/oracle/product/9i/appsutil/install/MSBEP004_dcpsr006osm
adcrobj.sh INSTE8_APPLY
addbprf.sh INSTE8
adsvdb.sh INSTE8
adsvdcnv.sh INSTE8
adsvdlsn.sh INSTE8
afdbprf.sh INSTE8_PRF
afmkinit.sh INSTE8_SETUP
Directory: /volora/oracle9/app/oracle/product/9i/appsutil/install
adlnkoh.sh INSTE8
Directory: /volora/oracle9/app/oracle/product/9i/appsutil/scripts/MSBEP004_dcpsr006osm
adautocfg.sh INSTE8
addbctl.sh INSTE8
addlnctl.sh INSTE8
adlsnodes.sh INSTE8
adpreclone.pl INSTE8
Directory: /volora/oracle9/app/oracle/product/9i/rdbms/lib
config.s INSTE8
AutoConfig is exiting with status 14
Please suggest what could be the problem
Thanks in Advance
Regards
Kiran Ranahi guru
The logfile given bellow error
AC-00423: Template file: /volora/oracle9/app/oracle/product/9i/appsutil/template/adpreclone.pl missing from file system.
Raised by oracle.apps.ad.autoconfig.InstantiateFile
AC-00423: Template file: /volora/oracle9/app/oracle/product/9i/appsutil/template/adsvdb.sh missing from file system.
Raised by oracle.apps.ad.autoconfig.InstantiateFile
AC-00423: Template file: /volora/oracle9/app/oracle/product/9i/appsutil/template/adsvdlsn.sh missing from file system.
Raised by oracle.apps.ad.autoconfig.InstantiateFile
AC-00423: Template file: /volora/oracle9/app/oracle/product/9i/appsutil/template/adsvdcnv.sh missing from file system.
Raised by oracle.apps.ad.autoconfig.InstantiateFile
AC-00423: Template file: /volora/oracle9/app/oracle/product/9i/appsutil/template/addbprf.sh missing from file system.
Raised by oracle.apps.ad.autoconfig.InstantiateFile
AC-00423: Template file: /volora/oracle9/app/oracle/product/9i/appsutil/template/afdbprf.sh missing from file system.
Raised by oracle.apps.ad.autoconfig.InstantiateFile
AC-00423: Template file: /volora/oracle9/app/oracle/product/9i/appsutil/template/addbctl.sh missing from file system.
Raised by oracle.apps.ad.autoconfig.InstantiateFile
AC-00423: Template file: /volora/oracle9/app/oracle/product/9i/appsutil/template/addlnctl.sh missing from file system.
Raised by oracle.apps.ad.autoconfig.InstantiateFile
AC-00423: Template file: /volora/oracle9/app/oracle/product/9i/appsutil/template/adlsnodes_ux.sh missing from file system.
Raised by oracle.apps.ad.autoconfig.InstantiateFile
AC-00423: Template file: /volora/oracle9/app/oracle/product/9i/appsutil/template/adlnkoh.sh missing from file system.
Raised by oracle.apps.ad.autoconfig.InstantiateFile
AC-00423: Template file: /volora/oracle9/app/oracle/product/9i/appsutil/template/adautocfg_ux.sh missing from file system.
Raised by oracle.apps.ad.autoconfig.InstantiateFile
AC-00423: Template file: /volora/oracle9/app/oracle/product/9i/appsutil/template/adcrobj.sh missing from file system.
Raised by oracle.apps.ad.autoconfig.InstantiateFile
File /volora/oracle9/app/oracle/product/9i/dbs/initMSBEP004.ora of type INSTALL already exists, this file will not be instantiated.
File /volora/oracle9/app/oracle/product/9i/network/admin/MSBEP004_dcpsr006osm/listener.ora of type INSTALL already exists, this file will not be instantiated.
AC-00423: Template file: /volora/oracle9/app/oracle/product/9i/appsutil/template/afmkinit.sh missing from file system.
Raised by oracle.apps.ad.autoconfig.InstantiateFile
AC-00423: Template file: /volora/oracle9/app/oracle/product/9i/appsutil/template/config_aix_64.s missing from file system.
Raised by oracle.apps.ad.autoconfig.InstantiateFile
AutoConfig Setup Phase
Running Setup Process 2 of 2 for AppsUtil
AC-50400: Script file /volora/oracle9/app/oracle/product/9i/appsutil/install/MSBEP004_dcpsr006osm/afmkinit.sh missing.
Raised by oracle.apps.ad.autoconfig.InstantiateFile
AutoConfig Profile Phase
Running Profile Process 1 of 1 for AppsUtil
AC-50400: Script file /volora/oracle9/app/oracle/product/9i/appsutil/install/MSBEP004_dcpsr006osm/afdbprf.sh missing.
Raised by oracle.apps.ad.autoconfig.InstantiateFile
AutoConfig Services Phase
Running Service Process 1 of 1 for AppsUtil
AC-50400: Script file /volora/oracle9/app/oracle/product/9i/appsutil/install/MSBEP004_dcpsr006osm/adcrobj.sh missing.
Raised by oracle.apps.ad.autoconfig.InstantiateFile -
Windows could not start after SP-3 update
Windows could not start after SP-3 update
After I updated Apple Software Update to 2.1 and then updated to BC 2.1 successfully I D/L & Installed SP-3. Even got the Wizard & seemed to go OK. Got prompt “Installation Complete, Need to restart.” I did. I got a black screen with text:
Windows could not start because the following file is missing or corrupt:\Windows\inf\biosinfo.inf
You can attempt to repair the file by starting Windows setup using the original setup CD-ROM. Select ‘r’ at the 1st screen to repair.
I used the power button to shut down Windows & then booted into Mac OS X normally.
I think I need to restart my Mac into Windows (using the Option key ) WHILE THE WINDOWS XP installation CD is in the optical Drive. Then maybe I’ll get a choice to select ‘r’ to repair at the 1st screen?
Has anyone done this with a similar error & successfully repaired their Windows installation? I don’t know if this is a Boot Camp problem or not. XP SP 2 had been working just fine.
Thanks for any help.Solved! It apparently was NOT a Boot Camp Issue. The fix was to obtain the file “biosinfo.inf” and from the Mac side, go into my WIndows XP HDD & add that file to: Windows/INF folder. (Yes, it was missing). Why my XP SP2 installation worked fine w/o this file is beyond my knowledge. Perhaps this file is needed only when doing a type of major update yet not needed for simply starting & running Windows? There are web pages stating that upgrading to SP 3 can cause this problem if using 3rd party software such as Norton Anti-Virus (I don’t have that but DO have Zone Alarm). There are also various complicated, long fixes out there. For me, replacing that file did the trick & everything seems fine now. (As far as where one “obtains” that file--long story)
Message was edited by: growler62000 -
Hi !!!
i got a problem with my Windos Xp professional OS.when iam trying to boot my system there is a critical error
saying that :
"Windows could not start bcoz the following file is missing or corrupt :\windows\systm32\cofig\system.
you can attempt to repair this file by starting windowssetup by using the original setupcd-rom.select 'R' at the first screen to start repair."
as i put the Xp Cd-Rom , ther is no such first screen to repair .instead it copies all it's files to the system as if it is going to start fresh installation of xp.how can i repair this by doing simple things.
can i change Windows activation key ?plz ......clearly explain me.
Hi,
Thank you for your post! Unfortunately there is not a current forum to post the question you are asking so I would recommend that you post you question to one of the microsoft.public.windowsxp.setup_deployment newsgroup located here: http://www.microsoft.com/communities/newsgroups/list/en-us/default.aspx?dg=microsoft.public.windowsxp.setup_deployment&cat=en_us_426c225c-4227-431b-8068-ccad54bb9d7a&lang=en&cr=us
Hope that helps!
Sudarshan shindode Tier 2 Application Support Server and Tools Online Engineering Live Services Team -
I can't sync my iphone to itunes i get this error message "Iphone could not sync because the sync failed to start" Help? both my computer windows and my phone are on the current versions of ios and itunes
Hello lenmin,
Thanks for using Apple Support Communities.
To help resolve this issue where you're repeatedly prompted to authorize with your Apple ID in iTunes when syncing, please follow the directions in the article below.
iTunes: Missing folder or incorrect permissions may prevent authorization - Apple Support
Have a great weekend,
Alex H. -
Using Windows 8.1 Pro on Toshiba Satellite i7 Laptop with 8Gb Ram
After upgrade from Windows 8 Pro to 8.1 Pro, the Offline Files/CSC service refuses to start and gives the error message:
"Windows could not start the offline files service on local computer. Error 3: The system cannot find the path specified"
Before the upgrade, offline files worked fine... how do I re-enable offline files?I had a similar issue - couldn't make any files available offline.
I found that the offline folder service would not start
This was because the CSC permission were totally screwed. I had to take ownership of each folder and file, one by one, then grant everyone full access.
then delete the full contents of the CSC folder
format the CSC database using the registry fix then reboot
in control panel, disable the offline files, reboot, then re-enable. and now its working :)
2hrs to resolve this, with grateful thanks to this thread and some others.
damn windows8 -
I have been making Christmas Cards, working in layers and then flattening the image. However, I am unable to save the final image as I get the following message: Could not save because the disk is full. Looking at the system report for my laptop shows there is 52GB of free space.
Well, running on a 2006 model. I did not have a startup disc. Initially, it booted up on original software in 2006. Since then, I've upgraded to 10.6 via a box set. And, since then I think I popped it up to lion.
All I have on a disc is snow leopard. And, I can't get farther than the setup screen due to hard drive. I'm taking to a apple authorized repair store right now. We'll see what they tell me . I'm just going to weigh the cost of repair vs. buying new.
Another bad, stupid thing is I had no means of backing up my stuff. So, I might have lost things like music, vids, etc. we'll see if they can recover. If the cost is too much for repair I might just forget it and start over with a new system. Just not sure at this point. -
Windows could not start the distributed transaction coordinator service on local computer
Dear All,
I'm having an issue starting the DTC service in windows 7 OS. I always got the error message below when im trying to start it.
"Windows could not start the distributed transaction coordinator service on local computer"
Thanks,
MelvinHi Melvin,
Please try the following methods to solve this issue:
Method 1: Re-create the MS DTC log, and then restart the service.
Click
Start, type cmd in the search box, and then press
Enter.
Type the command
msdtc -resetlog at the command prompt, and then press
Enter.
Warning: The msdtc -resetlog command can cause data corruption if it is used incorrectly. Make sure that you do not have any pending transactions when you run this
command.
Type the command net start msdtc, and then press
Enter.
Method 2: Set the logon account permissions for the MS DTC service
If Method 1 does not resolve the problem, set the logon account for the MS DTC service to have read and write permissions for the Msdtc.log file. Please follow the steps below:
Click
Start, type cmd in the search box, and then press
Enter.
Type the command
control admintools at the command prompt, and then press
Enter.
Double-click
Services.
In the Services pane, locate
Distributed Transaction Coordinator.
In the
Log On As column, note the account name. Note: The default logon account for the MS DTC service is the NETWORK SERVICE account.
Start Windows Explorer, and
then open the %windir%\System32\Msdtc folder.
Right-click the
Msdtc.log file, and then click Properties.
Click the
Security tab.
Click the logon account name that you noted
in step 5. For example, click the NETWORK SERVICE account name.
In the
Permissions pane, click to select the Allow check box for the following permissions: ◦Read & Execute
◦Read ◦Write
Click
OK.
Click
Yes to accept the security warning.
In the
Services pane, right-click Distributed Transaction Coordinator, and then click
Start.
Method 3: Assign permissions to the NETWORK service to traverse the directory tree
Determine whether the NETWORK service has permissions to traverse through the folder. To do this, follow these steps.
Note: By default, the "Everyone" group has these permissions. For more information, go to the following Microsoft TechNet website:
Bypass traverse checking
Click
Start, type secpol.msc in the search box, and then press
Enter.
Browse through the following computer configuration:
\Windows Settings\Security Settings\Local Policies\User Rights Assignment
Check for "Bypass traverse checking," and then add the "Everyone" group.
Update the Group Policy settings on the computer. To do this, click
Start, type gpupdate in the search box, and then press
Enter.
In the
Services pane, right-click Distributed Transaction Coordinator, and then click
Start.
Regards,
Lany Zhang -
Windows could not start the Network Location Awareness service on Local computer
i have a dell inspiron 1501 laptop running windows vista home premium media center edition. i have recently been getting an error when trying to view networked computer saying "connection status: unknown" and "the dependency service or group failed to start". i started by disabling and re-enabling the driver and that did not help. i then brought up the services.msc thing and started looking at the networking services. i noticed that the Network Location Awareness service was not started so i tried to start it. i got a popup message saying "Windows could not start the Netwrok Location Awareness service on Local Computer. Error 0xc000096: 0xc0000096".
i also get an error popup when i try to start the Network List service saying "Windows could not start the Network List Service service on Local Computer. Error 1068: The dependency service or group failed to start".
what might i have done to make this happen and what can i do to try to fix it?
hausHi,
Thank you for the post.
I fully understand the inconvenience the issue has been caused and the current situation can be frustrating. Please try the following steps for troubleshooting.
1. Please start the computer in Safe Mode with Network and check the result. If the issue disappears, please perform a clean boot.
For the detailed steps, please refer to the step 1 and 2 in the KB article 936214 (http://support.microsoft.com/kb/936214).
2. If the issue persists, please check the system file by using the command SFC /scannow.
For more information, please refer to the KB article 929833 (http://support.microsoft.com/kb/929833).
If the above suggestions do not resolve the issue that service fails to start up, please understand that debug and dump analysis may be required for further troubleshooting. Also, in most cases, it is necessary to check the source codes. However, debugging is out of our forum’s support boundary. A support call to our product service team is needed for the debugging service. In this case, I’d like to suggest contacting Microsoft Customer Support Service (CSS) for assistance so that this issue can be resolved efficiently.
To obtain the phone numbers for specific technology request, please check the website listed below:
http://support.microsoft.com/default.aspx?scid=fh;EN-US;PHONENUMBERS
Thank you for your understanding.
Sincerely,
Joson Zhou
Microsoft Online Community Support
Maybe you are looking for
-
IOS 8 creating multiple group messages with same recipients
After updating to iOS 8.0, my iPhone 5s has started creating multiple group messages with the same recipients. For example, my phone has created three group threads with the exact same people in it. Different friends' messages go to different threads
-
Hello, Odd behavior in Keynote 4.0.4. I recently upgraded to Lion on a late 2011 MBP. Good news is that my version of Keynote still seems to work just fine. Bad news is that something odd is happening when opening existing presentations. - If I ju
-
Urgent !!!!! Authentication scheme to include a password policy
Hi all, Any one please tell me the steps to include passwordpolicy in my form based authentication. It's very urgent. Thanks in advance. Siva Pokuri. Edited by: spokuri on Sep 4, 2009 7:34 AM
-
Can someone tell me what are the specs for a fully charged new battery for a 2008 MB (aluminum)? i.e. full charge capacity, voltage, amperage, etc. My current battery shows 3276 charge capacity, 12419 volts, 0 amperage, 551 cycles. It used to say "re
-
Laptop can not find the router.
Yeah. First of all I'm not so technical so... sorry. Fancy internet talk and such would most likely confuse me. First of all, I bought a WRT54G2 router. The Staples employee assured me that I'd be able to connect me and my sister's laptops to the int