Windows could not start the Network Location Awareness service on Local computer

i have a dell inspiron 1501 laptop running windows vista home premium media center edition. i have recently been getting an error when trying to view networked computer saying "connection status: unknown" and "the dependency service or group failed to start". i started by disabling and re-enabling the driver and that did not help. i then brought up the services.msc thing and started looking at the networking services. i noticed that the Network Location Awareness service was not started so i tried to start it. i got a popup message saying "Windows could not start the Netwrok Location Awareness service on Local Computer. Error 0xc000096: 0xc0000096".
i also get an error popup when i try to start the Network List service saying "Windows could not start the Network List Service service on Local Computer. Error 1068: The dependency service or group failed to start".
what might i have done to make this happen and what can i do to try to fix it?
haus

Hi,
Thank you for the post.
I fully understand the inconvenience the issue has been caused and the current situation can be frustrating. Please try the following steps for troubleshooting.
1. Please start the computer in Safe Mode with Network and check the result. If the issue disappears, please perform a clean boot.
For the detailed steps, please refer to the step 1 and 2 in the KB article 936214 (http://support.microsoft.com/kb/936214).
2. If the issue persists, please check the system file by using the command SFC /scannow.
For more information, please refer to the KB article 929833 (http://support.microsoft.com/kb/929833).
If the above suggestions do not resolve the issue that service fails to start up, please understand that debug and dump analysis may be required for further troubleshooting. Also, in most cases, it is necessary to check the source codes. However, debugging is out of our forum’s support boundary. A support call to our product service team is needed for the debugging service. In this case, I’d like to suggest contacting Microsoft Customer Support Service (CSS) for assistance so that this issue can be resolved efficiently.
To obtain the phone numbers for specific technology request, please check the website listed below:
http://support.microsoft.com/default.aspx?scid=fh;EN-US;PHONENUMBERS
Thank you for your understanding.
Sincerely,
Joson Zhou
Microsoft Online Community Support

Similar Messages

Windows could not start the distributed transaction coordinator service on local computer

Dear All,
I'm having an issue starting the DTC service in windows 7 OS. I always got the error message below when im trying to start it.
"Windows could not start the distributed transaction coordinator service on local computer"
Thanks,
Melvin

Hi Melvin,
Please try the following methods to solve this issue:
Method 1: Re-create the MS DTC log, and then restart the service.
Click
Start, type cmd in the search box, and then press
Enter.
Type the command
msdtc -resetlog at the command prompt, and then press
Enter.
Warning: The msdtc -resetlog command can cause data corruption if it is used incorrectly. Make sure that you do not have any pending transactions when you run this
command.
Type the command net start msdtc, and then press
Enter.
Method 2: Set the logon account permissions for the MS DTC service
If Method 1 does not resolve the problem, set the logon account for the MS DTC service to have read and write permissions for the Msdtc.log file. Please follow the steps below:
Click
Start, type cmd in the search box, and then press
Enter.
Type the command
control admintools at the command prompt, and then press
Enter.
Double-click
Services.
In the Services pane, locate
Distributed Transaction Coordinator.
In the
Log On As column, note the account name. Note: The default logon account for the MS DTC service is the NETWORK SERVICE account.
Start Windows Explorer, and
then open the %windir%\System32\Msdtc folder.
Right-click the
Msdtc.log file, and then click Properties.
Click the
Security tab.
Click the logon account name that you noted
in step 5. For example, click the NETWORK SERVICE account name.
In the
Permissions pane, click to select the Allow check box for the following permissions: ◦Read & Execute
◦Read    ◦Write
Click
OK.
Click
Yes to accept the security warning.
In the
Services pane, right-click Distributed Transaction Coordinator, and then click
Start.
Method 3: Assign permissions to the NETWORK service to traverse the directory tree
Determine whether the NETWORK service has permissions to traverse through the folder. To do this, follow these steps.
Note: By default, the "Everyone" group has these permissions. For more information, go to the following Microsoft TechNet website:
Bypass traverse checking
Click
Start, type secpol.msc in the search box, and then press
Enter.
Browse through the following computer configuration:
        \Windows Settings\Security Settings\Local Policies\User Rights Assignment
Check for "Bypass traverse checking," and then add the "Everyone" group.
Update the Group Policy settings on the computer. To do this, click
Start, type gpupdate in the search box, and then press
Enter.
In the
Services pane, right-click Distributed Transaction Coordinator, and then click
Start.
Regards,
Lany Zhang

Wndows could not start the SQL Server (MSSQLSERVER) service on Local computer

I have 2 instance of SQL Server in same server. A is installed first and B next.
Somehow A cannot start at all when I try to start from Windows Services.
B can be started normally.
A worked normally week ago. There has been only one thing what I may have to server since that.
I have installed MondoDB. Currently MondoDB it is stopped.
windows could not start the SQL Server (MSSQLSERVER) service on Local computer
Error 31: A device attached to the system is not functioning.
Kenny_I

I don't see anything special in event logs.
Data file of both SQL Server instance are located on same C drive of same server.
Kenny_I
Hello Kenny,
The main issue is not related to SQL server .SQL is at receiving end its hardware or the cables ( not sure which one) are the one causing issue.
I serached
http://social.msdn.microsoft.com/Forums/windowsdesktop/en-US/111da2ae-0a86-41a5-ba03-7d1c0cc91ea9/windows-error-code-31a-device-attached-to-the-system-is-not-functioning-properly?forum=wdk
http://www.chicagotech.net/netforums/viewtopic.php?f=1&t=6467
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

Could not start the Oracle BI server service on local computer - error 1067

Hi Guys,
i've successfully installed the BI.however when i try to start the BI service, i get the above message.any ideas to fix this ?
Thanks
Jag

This error occurs after an initial install, when the Oracle suite is installed logged in as the user(who has admin rights on the machine). If this is the case,
1.Go to Services (Admin Tools > Services)
2.Double click the Oracle services( BI Server or Presentation or TNS Listener).
3.Go to Log On tab
4.If local system account is checked , un-check that option. Check "This Account" option
5.Give the user information for that machine(e.g domain\username)
6.Specify password associated with the user ( the username/pwd that is used to login to the machine)
7.Confirm pwd and click Apply.
8.re-start the service.
This is what i did , and it worked.
good luck and hopefully oracle addresses these issues , they become frustrating to use the product.
Thanks,
Ram

"could not start the Oracle BI Presentation Server on Local computer error"

Hello Folks,
i am trying to start the OBIEE Presentation services, The OBIEE server and Java Host Services are started.
i am getting this error and i didnt change any settings and finally getting this error
"Windows could not start the Oracle BI Presentation Server on Local Computer. For more information, review the System Even Log. If this is a non Microsoft service contact the service vendor, and refer to service-specific error code -1."
thanks

Here is the solution from another freind
1. Stop BI Server Service > Start BI Server Service > Start BI Presentation Service. If that doesn't work...
2. Restart machine and follow step 1. If that doesn't work...
3. Check instantconfig.ini file and check syntax is correct. Also check java directory path mentioned is the valid one. If that doesn't work...
4. Rename the catalog folder to something else and follow step 1. It will create new catalog folder. Then copy _Shared from old catalog folder and you are good to go.
catalog folder will be in oraclebidata/web/catalog...
either delete the folder and create a new empty one or rename it
also have a look at instanceconfig.ini file
thanks

SPP 4.30 windows could not start the rwd uperform monitoring service

Hi, i just install spp 4.30 with two servers, one for the sql databases, and the other for the search server and vignette.
Windows server 2008. 64 bits
All the installation was ok, but when you try to configure the server it doesn't show the web page.
The rwd uperform monitoring service can not start and send the following error:
Windows could not start the rwd uperform monitoring service error 1067.
Any ideas.
thanks
Edited by: Idel Gorodezky on Jun 26, 2011 3:14 AM

Hi, thanks for the Help, i am sending the logs.
- <Log>
- <Entry Type="Error" Id="f19c1f86-8e6e-4bee-8c18-312e7edb23d2">
<Date>6/27/2011 1:23:09 AM</Date>
<ThreadID>9</ThreadID>
<ErrorCode>24-01-014</ErrorCode>
<RoutineNamespace>RWD.uPerform.CMS.Vignette.VerifyLicense</RoutineNamespace>
<FriendlyMessage>An error occurred while verifying license.</FriendlyMessage>
<Message>The remote server returned an error: (401) Unauthorized.</Message>
<StackTrace>at System.Net.WebClient.DownloadDataInternal(Uri address, WebRequest& request) at System.Net.WebClient.DownloadData(Uri address) at RWD.uPerform.CMS.Vignette.GetBytesFromServer(Uri uri, CredentialSet CredentialsToUse, String postData) at RWD.uPerform.CMS.Vignette.GetStringFromServer(Uri uri, CredentialSet CredentialsToUse, String postData) at RWD.uPerform.CMS.Vignette.VerifyLicense() at RWD.uPerform.WindowsService.QueueMonitor.VerifyLicense()</StackTrace>
<Parameters />
</Entry>
- <Entry Type="Error" Id="2a9ca666-2f94-4cb0-86e9-62254c21e2ec">
<Date>6/27/2011 5:39:02 AM</Date>
<ThreadID>9</ThreadID>
<ErrorCode>24-01-014</ErrorCode>
<RoutineNamespace>RWD.uPerform.CMS.Vignette.VerifyLicense</RoutineNamespace>
<FriendlyMessage>An error occurred while verifying license.</FriendlyMessage>
<Message>The remote server returned an error: (401) Unauthorized.</Message>
<StackTrace>at System.Net.WebClient.DownloadDataInternal(Uri address, WebRequest& request) at System.Net.WebClient.DownloadData(Uri address) at RWD.uPerform.CMS.Vignette.GetBytesFromServer(Uri uri, CredentialSet CredentialsToUse, String postData) at RWD.uPerform.CMS.Vignette.GetStringFromServer(Uri uri, CredentialSet CredentialsToUse, String postData) at RWD.uPerform.CMS.Vignette.VerifyLicense() at RWD.uPerform.WindowsService.QueueMonitor.VerifyLicense()</StackTrace>
<Parameters />
</Entry>
- <Entry Type="Error" Id="7c26d18a-fadf-49f1-8f0f-881ea4d33fa0">
<Date>6/27/2011 10:59:44 AM</Date>
<ThreadID>9</ThreadID>
<ErrorCode>24-01-014</ErrorCode>
<RoutineNamespace>RWD.uPerform.CMS.Vignette.VerifyLicense</RoutineNamespace>
<FriendlyMessage>An error occurred while verifying license.</FriendlyMessage>
<Message>The remote server returned an error: (401) Unauthorized.</Message>
<StackTrace>at System.Net.WebClient.DownloadDataInternal(Uri address, WebRequest& request) at System.Net.WebClient.DownloadData(Uri address) at RWD.uPerform.CMS.Vignette.GetBytesFromServer(Uri uri, CredentialSet CredentialsToUse, String postData) at RWD.uPerform.CMS.Vignette.GetStringFromServer(Uri uri, CredentialSet CredentialsToUse, String postData) at RWD.uPerform.CMS.Vignette.VerifyLicense() at RWD.uPerform.WindowsService.QueueMonitor.VerifyLicense()</StackTrace>
<Parameters />
</Entry>
- <Entry Type="Error" Id="0bd8fe26-8265-4b2e-a192-0b6513eb5ad8">
<Date>6/27/2011 12:01:15 PM</Date>
<ThreadID>9</ThreadID>
<ErrorCode>24-01-014</ErrorCode>
<RoutineNamespace>RWD.uPerform.CMS.Vignette.VerifyLicense</RoutineNamespace>
<FriendlyMessage>An error occurred while verifying license.</FriendlyMessage>
<Message>The remote server returned an error: (401) Unauthorized.</Message>
<StackTrace>at System.Net.WebClient.DownloadDataInternal(Uri address, WebRequest& request) at System.Net.WebClient.DownloadData(Uri address) at RWD.uPerform.CMS.Vignette.GetBytesFromServer(Uri uri, CredentialSet CredentialsToUse, String postData) at RWD.uPerform.CMS.Vignette.GetStringFromServer(Uri uri, CredentialSet CredentialsToUse, String postData) at RWD.uPerform.CMS.Vignette.VerifyLicense() at RWD.uPerform.WindowsService.QueueMonitor.VerifyLicense()</StackTrace>
<Parameters />
</Entry>
- <Entry Type="Error" Id="b8b0694b-5214-4871-9bc6-b8af11dadf6f">
<Date>6/27/2011 1:06:19 PM</Date>
<ThreadID>9</ThreadID>
<ErrorCode>24-01-014</ErrorCode>
<RoutineNamespace>RWD.uPerform.CMS.Vignette.VerifyLicense</RoutineNamespace>
<FriendlyMessage>An error occurred while verifying license.</FriendlyMessage>
<Message>The remote server returned an error: (401) Unauthorized.</Message>
<StackTrace>at System.Net.WebClient.DownloadDataInternal(Uri address, WebRequest& request) at System.Net.WebClient.DownloadData(Uri address) at RWD.uPerform.CMS.Vignette.GetBytesFromServer(Uri uri, CredentialSet CredentialsToUse, String postData) at RWD.uPerform.CMS.Vignette.GetStringFromServer(Uri uri, CredentialSet CredentialsToUse, String postData) at RWD.uPerform.CMS.Vignette.VerifyLicense() at RWD.uPerform.WindowsService.QueueMonitor.VerifyLicense()</StackTrace>
<Parameters />
</Entry>
- <Entry Type="Error" Id="370efaa4-1f71-413c-a027-126b31693932">
<Date>6/27/2011 4:17:07 PM</Date>
<ThreadID>9</ThreadID>
<ErrorCode>24-01-014</ErrorCode>
<RoutineNamespace>RWD.uPerform.CMS.Vignette.VerifyLicense</RoutineNamespace>
<FriendlyMessage>An error occurred while verifying license.</FriendlyMessage>
<Message>The remote server returned an error: (401) Unauthorized.</Message>
<StackTrace>at System.Net.WebClient.DownloadDataInternal(Uri address, WebRequest& request) at System.Net.WebClient.DownloadData(Uri address) at RWD.uPerform.CMS.Vignette.GetBytesFromServer(Uri uri, CredentialSet CredentialsToUse, String postData) at RWD.uPerform.CMS.Vignette.GetStringFromServer(Uri uri, CredentialSet CredentialsToUse, String postData) at RWD.uPerform.CMS.Vignette.VerifyLicense() at RWD.uPerform.WindowsService.QueueMonitor.VerifyLicense()</StackTrace>
<Parameters />
</Entry>
</Log>
<configuration>
<appSettings>
    <add key="DataSource" value="fifcrsppdb01" />
    <add key="Database" value="uperformGlossarydef" />
    <add key="DatabaseEngine" value="SQLserver" />
    <add key="DatabasePort" value="1433" />
    <add key="DatabaseSchema" value="glossaryPublic10" />
    <add key="ConnectionModifier" value=";pooling=false" />
    <add key="DatabasePassword" value="Zn4Od3shJCfR6hrx0ALMNg==" />
    <add key="DatabaseUser" value="glossaryPublic10" />
    <add key="Flags" value="0" />
    <add key="SMTPServer" value="172.16.3.114" />
    <add key="SMTPDomain" value="16.3.114" />
    <add key="HostName" value="FIFCRSPPAP01.ccr.co.cr" />
    <add key="HostPort" value="80" />
    <add key="HostProtocol" value="http" />
    <add key="GlossaryEnabled" value="True" />
    <add key="GlossaryUseRTF" value="True" />
    <add key="GlossaryDefaultLanguage" value="en-US" />
    <add key="VignetteIntegrated" value="True" />
    <add key="InstallLocation" value="C:\Vignette\Collaboration\" />
    <add key="ErrorLog" value="WWW\uPerformWS\logs\ServerErrors.xml" />
    <add key="DataFolder" value="WWW\RWD\Data\" />
    <add key="LibraryStructure" value="en-US_rwdDocLib.xml" />
    <add key="WorkingLocation" value="WWW\uPerformWS\WorkingFolder\" />
    <add key="ErrorMaxSize" value="1000000" />
    <add key="ErrorHistory" value="30" />
    <add key="GlossaryQueue" value=".\private$\GlossaryQueue" />
    <add key="PublishingQueue" value=".\private$\PublishingQueue" />
    <add key="ImportExportQueue" value=".\private$\ImportExportQueue" />
    <add key="ErrorQueue" value=".\private$\ErrorQueue" />
    <add key="UserManagementQueue" value=".\private$\UserManagementQueue" />
    <add key="Transforms" value="WWW\uPerformWS\ms\PublishingData\Base Static\xml\transforms" />
    <add key="CurrentVersion" value="4.30" />
    <add key="TrustAllCertificates" value="True" />
    <add key="WebRequestTimeout" value="600000" />
    <add key="LdapAuthentication" value="ServerBind" />
    <add key="WordtoHTML" value="True" />
    <add key="WordtoPDF" value="True" />
    <add key="PPTtoPDF" value="True" />
    <add key="ExceltoPDF" value="True" />
    <add key="WordtoSource" value="True" />
    <add key="PPTtoSource" value="True" />
    <add key="ExceltoSource" value="True" />
    <add key="PublishedContent" value="WWW\ucontent\" />
    <add key="PublisherConfig" value="WWW\uPerformWS\ms\PublishingData\configuration files\transformation.settings" />
    <add key="Templates" value="WWW\uPerformWS\ms\PublishingData\Base AppData\templates\" />
    <add key="BaseStatic" value="WWW\uPerformWS\ms\PublishingData\Base Static\" />
    <add key="BaseAppData" value="WWW\uPerformWS\ms\PublishingData\Base AppData\" />
    <add key="PensListenerPath" value="WWW\uPerformWS\" />
    <add key="Upgrade" value="WWW\uPerformWS\ms\PublishingData\Upgrade\" />
    <add key="EnableDocSIM" value="True" />
    <add key="EnableDocXHTML" value="True" />
    <add key="EnableDocPDF" value="True" />
    <add key="EnableDocWORD" value="True" />
    <add key="EnableDocPPT" value="True" />
    <add key="EnableCourseSIM" value="True" />
    <add key="EnableCoursePDF" value="True" />
    <add key="EnableCourseWORD" value="True" />
    <add key="EnablePPTXsource" value="True" />
    <add key="EnablePPTXpdf" value="True" />
    <add key="EnableXLSXsource" value="True" />
    <add key="EnableXLSXpdf" value="True" />
    <add key="EnableDOCXsource" value="True" />
    <add key="EnableDOCXhtml" value="True" />
    <add key="EnableDOCXpdf" value="True" />
    <add key="SystemPassword" value="" />
    <add key="IntegrationEnabled" value="False" />
    <add key="IntegrationUserName" value="" />
    <add key="IntegrationPassword" value="" />
    <add key="IntegrationURL" value="" />
    <add key="IntegrationOutgoingPolicy" value="" />
    <add key="IntegrationIncomingPolicy" value="" />
    <add key="PolicyFile" value="WWW\uPerformWS\wse3policyCache.config" />
    <add key="WebRequestQueryString" value="SMSESSION=NO" />
    <add key="SiteMinderCookie" value="SMCHALLENGE" />
    <add key="SiteMinderDomain" value="" />
    <add key="TivoliCookieName" value="" />
    <add key="TivoliCookieDomain" value="" />
    <add key="TivoliWebSEALJunction" value="" />
    <add key="TivoliWebSEALBaseURL" value="" />
    <add key="AuthenticationType" value="Basic" />
    <add key="LDAPTimeout" value="10" />
    <add key="UserPageSize" value="2000" />
</appSettings>
</configuration>

HT1926 Windows could not start the Apple Mobile Device service on iTunes install

Trying to install the latest update to iTunes on Wind 7 x64 box... Died during installation with error "Service 'Apple Mobile Device' failed to start... havee uninstalled itunes and am running a fresh install as Administrator... Get the same message...
Tried to start the Mobile Device service from computer>manage>services but recieve the error 'Windows could not start the AppleMobile... Error 1053 The service did not respond to the start or conrol request in a timely fashion..
Any ideas??? thanks.............

Hello thezerfi,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
How to restart the Apple Mobile Device Service (AMDS) on Windows
http://support.apple.com/kb/ts1567
Close iTunes and disconnect the iPhone, iPad, or iPod touch.
Click the Windows Start button .
In the Start Search field type Services.
In the Programs section of the search results, Click "Services".
Select Apple Mobile Device and click Stop the service as shown below:
After the service has stopped, click Start the service.
After the Apple Mobile Device service has started again, open iTunes and connect the device.
Best of luck,
Mario

I get an error message when downloading ITunes :could not access the network location %public%\desktop\

I get an error message when downloading ITunes "could not access the network location" %public%\desktop\?
windows vista 32 bit

Try the following user tip:
"Could not access network location %PUBLIC%\Desktop\" install errors

Windows could not start the FLEXnet Licensing Service service on Local Computer Error 1068: The dependency service or group failed to start.

Today I installed Adobe Director 11.5. I received a couple of errors in the FLEXnet Licensing Service. It looks It could not start. I tried to download the Licence fix what I found on Google but that doesn't work, so I checked the 'Service' at service (windows).
It's status is empty. When I double click on the FLEXnet Licensing Service, clicked on start at the opened window and an error is coming:
Windows could not start the FLEXnet Licensing Service service on Local Computer
Error 1068: The dependency service or group failed to start.
I don't understand what it says with this message, only that it is impossible to start. However, that is not what I am trying of course, I want to start the FLEXnet Licensing Service, service.
Re-installing of the software, doesn't make any change. How can I start it so Director is also working?

Hi Don1233,
Please consider seek help at the software vendor side.
For the services didn't start, follow the suggestions posted by Elton in the thread below:
https://social.technet.microsoft.com/Forums/en-US/e35da253-f0df-41d1-8df2-b73fa54742a0/windows-could-not-start-the-flexnet-licensing-service-service-on-local-computer-error-1068-the?forum=w7itproinstall
Best regards
Michael Shao
TechNet Community Support

"Windows could not start the offline files service on local computer. Error 3: The system cannot find the path specified"

Using Windows 8.1 Pro on Toshiba Satellite i7 Laptop with 8Gb Ram
After upgrade from Windows 8 Pro to 8.1 Pro, the Offline Files/CSC service refuses to start and gives the error message:
"Windows could not start the offline files service on local computer. Error 3: The system cannot find the path specified"
Before the upgrade, offline files worked fine... how do I re-enable offline files?

I had a similar issue - couldn't make any files available offline.
I found that the offline folder service would not start
This was because the CSC permission were totally screwed. I had to take ownership of each folder and file, one by one, then grant everyone full access.
then delete the full contents of the CSC folder
format the CSC database using the registry fix then reboot
in control panel, disable the offline files, reboot, then re-enable. and now its working :)
2hrs to resolve this, with grateful thanks to this thread and some others.
damn windows8

Windows could not start the DHCP Client service on Local Computer, Error 2

Hi everyone,
I assign IP addresses via my router but today installed OpenVPN and it depends on the DHCP Client service. I checked in services and found it wasn't running. If I try starting it I get this message "Windows could not start the DHCP Client
service on Local Computer." "Error 2: The system cannot find the file specified.".
There's plenty of info out there about this issue but nothing seems to fix it for me. I've tried the following as an administrator,
"sfc /scannow" - It reported and error which it fixed but after a restart the problem persists.
"NET LOCALGROUP administrators "NT Authority\Local Service" /add"
"netsh winsock reset catalog"
I also checked that all dependencies of the DHCP Client service are working. I used "CMD /K
SC QC DHCP" to check the dependencies and compared them to an identical computer and they are. Hope someone can help. Thanks in advance.

Hi,
Did you mean after the restart the sfc /scannow command still could find the corrupted files?
Have you check this these related registry entries permission for your account?
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Dhcp
permission needed: Query value, Create value, Enumerate Subkeys, Notify, Read Control
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Dhcp\Configurations
permission needed: Full Control, Read
for more information, read this article:
Some services do not start in Windows Vista and Windows 7
https://support.microsoft.com/kb/943996?wa=wsignin1.0
If the issue still cannot be resolved, I would like to suggest you use the recovery media to repair your computer.
Karen Hu
TechNet Community Support

When I open Itunes it says,Windows could not start the bonjour service on local computer.

Just recently, I had a problem with the AVFoundation thing on my computer. Well I got that fixed, but now it has a message coming up that says " Windows could not start the Bonjour Service service on local computer. Error 3: The system could not find the path specified.
Please tell me how to fix it.

Windows could not start the Bonjour Service service on local computer. Error 3: The system could not find the path specified.
That's an unfamiliar one, steve.
Let's see what happens if we try to start the service manually.
In your Start menu, right-click Computer and select "Manage".
Expand "Services & Applications"
Open "Services". (Perhaps maximise the Window to better see what's going on.)
Select the Bonjour Service and click "Start".
Do you get an error message then? If so, what does that one say?

Windows could not start the Cluster Service on Local computer. For more information, review the System Event Log. If this is a non-Microsoft service, contact the service vendor, and refer to service-specific error code 2.

Dear Technet,
Windows could not start the Cluster Service on Local computer. For more information, review the System Event Log. If this is a non-Microsoft service, contact the service vendor, and refer to service-specific error code 2.
My cluster suddenly went disappear. and tried to restart the cluster service. When trying to restart service this above mention error comes up.
even i tried to remove the cluster through power-shell still couldn't happen because of cluster service not running.
Help me please.. thank you.
Regards
Shamil

Hi,
Could you confirm which account when you start the cluster service? The Cluster service is a service that requires a domain user account.
The server cluster Setup program changes the local security policy for this account by granting a set of user rights to the account. Additionally, this account is made a member
of the local Administrators group.
If one or more of these user rights are missing, the Cluster service may stop immediately during startup or later, depending on when the Cluster service requires the particular
user right.
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Windows could not start the Server service on local computer Error 193:0xc1

Hello,
Not able to start Server (lanmanServer) Service in Windows Server 2008 R2
Its a VM and on logging into the Server it sometimes shows as started and then will stop by itself,
If we try to start manually it always gives the error --Windows could not start the Server service on local computer Error 193:0xc1
All dependent services are fine and running ,did sfc,did copy svchost and svcsrv.dll files from a working Server of same.but no help,no shares of this server are accessible since this service is not running
on checking the event log its shows an error "Server is not a valid win32 application"
Please help
Thanks and Regards
Jose

Hi,
Thanks for posting your question in the forum.
I noticed that you have created the same question in another thread. Please understand that we should focus on only one thread for the same question at the same time, please focus on the thread
below you created in the forum. Thanks for your understanding.
http://social.technet.microsoft.com/Forums/en-US/5ba43477-9626-4fdf-872a-d3ecd12835c5/windows-could-not-start-the-server-service-on-local-computer-error-1930xc1?forum=winserverNIS
Best Regards,
Andy Qi
Andy Qi
TechNet Community Support

TS1567 its denied, it says that "windows could not start the apple mobile service on Local Computer"?

its denied, it says that "windows could not start the apple mobile service on Local Computer"? What do I have to do?

http://support.apple.com/kb/TS1567

Windows could not start the Network Location Awareness service on Local computer

Similar Messages

Maybe you are looking for