Windows could not start the Server service on local computer Error 193:0xc1
Hello,
Not able to start Server (lanmanServer) Service in Windows Server 2008 R2
Its a VM and on logging into the Server it sometimes shows as started and then will stop by itself,
If we try to start manually it always gives the error --Windows could not start the Server service on local computer Error 193:0xc1
All dependent services are fine and running ,did sfc,did copy svchost and svcsrv.dll files from a working Server of same.but no help,no shares of this server are accessible since this service is not running
on checking the event log its shows an error "Server is not a valid win32 application"
Please help
Thanks and Regards
Jose
Hi,
Thanks for posting your question in the forum.
I noticed that you have created the same question in another thread. Please understand that we should focus on only one thread for the same question at the same time, please focus on the thread
below you created in the forum. Thanks for your understanding.
http://social.technet.microsoft.com/Forums/en-US/5ba43477-9626-4fdf-872a-d3ecd12835c5/windows-could-not-start-the-server-service-on-local-computer-error-1930xc1?forum=winserverNIS
Best Regards,
Andy Qi
Andy Qi
TechNet Community Support
Similar Messages
-
Dear Technet,
Windows could not start the Cluster Service on Local computer. For more information, review the System Event Log. If this is a non-Microsoft service, contact the service vendor, and refer to service-specific error code 2.
My cluster suddenly went disappear. and tried to restart the cluster service. When trying to restart service this above mention error comes up.
even i tried to remove the cluster through power-shell still couldn't happen because of cluster service not running.
Help me please.. thank you.
Regards
ShamilHi,
Could you confirm which account when you start the cluster service? The Cluster service is a service that requires a domain user account.
The server cluster Setup program changes the local security policy for this account by granting a set of user rights to the account. Additionally, this account is made a member
of the local Administrators group.
If one or more of these user rights are missing, the Cluster service may stop immediately during startup or later, depending on when the Cluster service requires the particular
user right.
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Windows could not start the remote services on local computer
windows could not start the remote services on local computer
1075: the dependency service does not exist or has been marked for deletionHi,
On which system you are facing this issue?
Can you ping to the remote system\server successfully?
Initially it seems that this occur due to services issue on system. Might possible that the remote Services component is not installed or is disabled. For that you can add the remote Services component by using the Add/Remove Programs tool in Control Panel
before attempting to start the service. If the service is already installed then check whether it is started properly. Additional check the relayed service for Remote and verify.
Hope it helps!
Thanks.
Dharmesh Solanki
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Could not start the OracleConcMgrVIS_apps service on Local Computer.Error 1
I have got installed Oracle Apps R 12 on my laptop. The system is running with Windows 2000 server. All went well till the time there were prop.er shusttdown of machine. The ConcMgr service stopped working when the system was turned off due to power down. First time when it happned i could got it work by installing the software agin. However it is become laborious every time to follow the same. Can any one has solution for this issue? I would appriciate your reply.
i spent 4 hrs on web for solution but no luck.
the following is the error
Services
Could not start the OracleConcMgrVIS_apps service on Local Computer.Error 1067: The process terminated unexpectedly.
OK
---------------------------Please run AutoConfig and make sure it completes successfully and try then.
Could not start the OracleConcMgrVIS_apps service on Local Computer.Error 1067: The process terminated unexpectedly.Please check the CM log file as well as the event viewer for details about the error.
Thanks,
Hussein -
Just recently, I had a problem with the AVFoundation thing on my computer. Well I got that fixed, but now it has a message coming up that says " Windows could not start the Bonjour Service service on local computer. Error 3: The system could not find the path specified.
Please tell me how to fix it.Windows could not start the Bonjour Service service on local computer. Error 3: The system could not find the path specified.
That's an unfamiliar one, steve.
Let's see what happens if we try to start the service manually.
In your Start menu, right-click Computer and select "Manage".
Expand "Services & Applications"
Open "Services". (Perhaps maximise the Window to better see what's going on.)
Select the Bonjour Service and click "Start".
Do you get an error message then? If so, what does that one say? -
Could not start the TNSListener service on Local Computer
I installed Oracle 10g rel 2 under Windows 2000. The computer is DHCP, so I installed the MS loop adapter, and am able to successfully the new IP address.
SQL*Plus returns this error:
ORA-12541: TNS:no listener
When I try to start the listener via control panel > services, I get this Microsoft Management Console error:
Could not start the OracleOraDb10g_home1TNSListener service on Local Computer. The service did not return an error. This could be an internal Windows error or an internal service error. If the problem persists, contact your system administrator.
My full computer name (via control panel) is dimension4100.ora.newmiddleclass.com and it is a member of workgroup WORKGROUP.
C:\WINNT\system32\drivers\etc\hosts contains (I added the 2nd line):
127.0.0.1 localhost
192.168.255.255 dimension4100.ora.newmiddleclass.com dimension4100
# listener.ora Network Configuration File: C:\oracle\product\10.2.0\db_1\network\admin\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oracle\product\10.2.0\db_1)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(ADDRESS = (PROTOCOL = TCP)(HOST = ora.newmiddleclass.com)(PORT = 1521))
# tnsnames.ora Network Configuration File: C:\oracle\product\10.2.0\db_1\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
HCM =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = ora.newmiddleclass.com)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = HCM.ora.newmiddleclass.com)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
My SID is HCM.
Can someone please suggest a solution? Thanks.That helped somewhat... now I am able to start the listener. However, SQP*Plus now says:
ORA-12514: TNS:listener does not currently know of service requested in connect descriptor.
My tnsnames.ora now looks like this:
# tnsnames.ora Network Configuration File: C:\oracle\product\10.2.0\db_1\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
HCM =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = dimension4100.ora.newmiddleclass.com)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = HCM.dimension4100.ora.newmiddleclass.com)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
I'm using dimension4100 for the SQL*Plus Host String in the login window. -
Could not start the oracle service on local computer
Could not start the oracle service on local computer, did not return an error blah, blah.
I am running Oracle 9i r2 Windows, and have choosen to start my instances manually. When i start them up I get the above error message. But if I am a little patient the services do start up and all is fine, so far as i can see anyway.
I am curious to know why does this error message arise.
Thanks in anticipation
FergusTo start the database in windows you have to start first the OracleService<SID> service.
These are the steps that you have to do at the command line:
NET START OracleService<SID>
SET ORACLE_SID=<database sid>
sqlplus /nolog
conn sys/password as sysdba
startupJoel Pérez
http://otn.oracle.com/experts -
Could not Start MaxDB: MDM Service on Local Computer
Hi,
I install the MaxDB to use the MDM software on to my PC. Its sucesfully completed. I uploaded the some of the repository and worked fine some 4 days.
Now my Database instance(MDM) is not at all started and If i check the status of this service in Control Panel->Administrative Tools, Showing as "Starting". It is never end and getting the error as
"Could not Start MaxDB: MDM Service on Local Computer" .
**Here MDM is the Database Instance name in my system.
Please Suggeme How to come out of this problem. Even i not able to uninstall the MaxDB.
Many Thanks in Advance,
Please help me.
Warm Regards,
VijayHi Natalia,
First, I want to Say Many Thanks for the reply.
I am using the MaxDB 7.6.02.01 Version. Actually i don't know anything about MaxDB. I am MDM Consultant, I just want to use it as MDM Database.
Why I want to uninstall is: I don't know how to solve this problem that why i will just want to uninstall everything and re-install it again to make use of it proper with MDM.
I really don't know where to execute the commands which you specified in previous post.
I didn't find the files knldiag.err & knldiag files and
Only the following information i find and Here are the details.
Waiting for you replay... Thanks
DBM.PRT Information (Part of the file - So much data is exist in that file)
2009-01-13 19:19:56 0x00000810 INF 226 DBMSrv DBM Server client disconnect: PID 2024 on computer NLYEHVSCE1NB215.code1.emi.philips.com
2009-01-14 09:38:11 0x00000a98 INF 216 DBMSrv DBM Server client connection (established at 2009-01-14 09:38:10): PID 2664 on computer NLYEHVSCE1NB215.code1.emi.philips.com
2009-01-14 09:38:11 0x00000a98 INF 283 DBMSrv command db_online
2009-01-14 09:38:14 0x00000a98 INF 1 DBMKnl Sending an administrative statement to the database
0x00000a98 INF 8 DBMKnl Statement: RESTART
2009-01-14 09:38:29 0x00000a98 INF 3 DBMKnl Received the result of an administrative statement from the database
0x00000a98 INF 9 DBMKnl Statement: RESTART
0x00000a98 INF 10 DBMKnl Returncode: 0
2009-01-14 09:38:30 0x00000a98 INF 226 DBMSrv DBM Server client disconnect: PID 2664 on computer NLYEHVSCE1NB215.code1.emi.philips.com
2009-01-14 12:01:56 0x000014d0 INF 216 DBMSrv DBM Server client connection (established at 2009-01-14 12:01:51): PID 4864 on computer NLYEHVSCE1NB215.code1.emi.philips.com
2009-01-14 12:01:56 0x000014d0 INF 283 DBMSrv command db_execute SELECT ID,CREATEDATE,USEDSIZE...
2009-01-14 12:01:56 0x000014d0 INF 283 DBMSrv command auto_extend show
2009-01-14 12:01:57 0x000014d0 INF 283 DBMSrv command auto_update_statistics show
2009-01-14 12:02:04 0x000014d0 INF 283 DBMSrv command db_execute SELECT ID,CREATEDATE,USEDSIZE...
2009-01-14 12:02:04 0x000014d0 INF 283 DBMSrv command auto_extend show
2009-01-14 12:02:04 0x000014d0 INF 283 DBMSrv command auto_update_statistics show
2009-01-14 12:03:05 0x000014d0 INF 283 DBMSrv command db_execute SELECT ID,CREATEDATE,USEDSIZE...
2009-01-14 12:03:05 0x000014d0 INF 283 DBMSrv command auto_extend show
2009-01-14 12:03:05 0x000014d0 INF 283 DBMSrv command auto_update_statistics show
2009-01-14 12:03:10 0x000014d0 INF 283 DBMSrv command db_execute SELECT ID,CREATEDATE,USEDSIZE...
2009-01-14 12:03:10 0x000014d0 INF 283 DBMSrv command auto_extend show
2009-01-14 12:03:11 0x000014d0 INF 283 DBMSrv command auto_update_statistics show
2009-01-14 12:03:14 0x000014d0 INF 283 DBMSrv command db_execute SELECT ID,CREATEDATE,USEDSIZE...
2009-01-14 12:03:15 0x000014d0 INF 283 DBMSrv command auto_extend show
2009-01-14 12:03:15 0x000014d0 INF 283 DBMSrv command auto_update_statistics show
2009-01-14 12:10:59 0x000014d0 INF 283 DBMSrv command db_execute SELECT ID,CREATEDATE,USEDSIZE...
2009-01-14 12:10:59 0x000014d0 INF 283 DBMSrv command auto_extend show
2009-01-14 12:11:00 0x000014d0 INF 283 DBMSrv command auto_update_statistics show
2009-01-14 12:11:12 0x000014d0 INF 283 DBMSrv command db_execute SELECT ID,CREATEDATE,USEDSIZE...
2009-01-14 12:11:12 0x000014d0 INF 283 DBMSrv command auto_extend show
2009-01-14 12:11:13 0x000014d0 INF 283 DBMSrv command auto_update_statistics show
2009-01-14 12:11:16 0x000014d0 INF 283 DBMSrv command db_execute SELECT ID,CREATEDATE,USEDSIZE...
2009-01-14 12:11:16 0x000014d0 INF 283 DBMSrv command auto_extend show
2009-01-14 12:11:17 0x000014d0 INF 283 DBMSrv command auto_update_statistics show
2009-01-14 12:11:20 0x000014d0 INF 226 DBMSrv DBM Server client disconnect: PID 4864 on computer NLYEHVSCE1NB215.code1.emi.philips.com
2009-01-14 18:52:59 0x0000091c INF 216 DBMSrv DBM Server client connection (established at 2009-01-14 18:52:58): PID 2316 on computer NLYEHVSCE1NB215.code1.emi.philips.com
2009-01-14 18:52:59 0x0000091c INF 283 DBMSrv command db_online
2009-01-14 18:53:13 0x0000091c INF 1 DBMKnl Sending an administrative statement to the database
0x0000091c INF 8 DBMKnl Statement: RESTART
2009-01-14 18:53:29 0x0000091c INF 3 DBMKnl Received the result of an administrative statement from the database
0x0000091c INF 9 DBMKnl Statement: RESTART
0x0000091c INF 10 DBMKnl Returncode: 0
2009-01-14 18:53:39 0x0000091c INF 226 DBMSrv DBM Server client disconnect: PID 2316 on computer NLYEHVSCE1NB215.code1.emi.philips.com
2009-01-15 09:52:01 0x00000a90 INF 216 DBMSrv DBM Server client connection (established at 2009-01-15 09:52:00): PID 2628 on computer NLYEHVSCE1NB215.code1.emi.philips.com
2009-01-15 09:52:01 0x00000a90 INF 283 DBMSrv command db_online
2009-01-15 09:52:04 0x00000a90 INF 1 DBMKnl Sending an administrative statement to the database
0x00000a90 INF 8 DBMKnl Statement: RESTART
2009-01-15 09:52:12 0x00000a90 INF 3 DBMKnl Received the result of an administrative statement from the database
0x00000a90 INF 9 DBMKnl Statement: RESTART
0x00000a90 INF 10 DBMKnl Returncode: 0
2009-01-15 09:52:12 0x00000a90 INF 226 DBMSrv DBM Server client disconnect: PID 2628 on computer NLYEHVSCE1NB215.code1.emi.philips.com
2009-01-15 20:18:21 0x00000b00 INF 216 DBMSrv DBM Server client connection (established at 2009-01-15 20:18:20): PID 2736 on computer NLYEHVSCE1NB215.code1.emi.philips.com
2009-01-15 20:18:21 0x00000b00 INF 283 DBMSrv command db_online
2009-01-15 20:18:24 0x00000b00 INF 1 DBMKnl Sending an administrative statement to the database
0x00000b00 INF 8 DBMKnl Statement: RESTART
2009-01-15 20:18:33 0x00000b00 INF 3 DBMKnl Received the result of an administrative statement from the database
0x00000b00 INF 9 DBMKnl Statement: RESTART
0x00000b00 INF 10 DBMKnl Returncode: 0
2009-01-15 20:18:33 0x00000b00 INF 226 DBMSrv DBM Server client disconnect: PID 2736 on computer NLYEHVSCE1NB215.code1.emi.philips.com
2009-01-16 09:38:57 0x00000ab8 INF 216 DBMSrv DBM Server client connection (established at 2009-01-16 09:38:56): PID 2720 on computer NLYEHVSCE1NB215.code1.emi.philips.com
2009-01-16 09:38:58 0x00000ab8 INF 283 DBMSrv command db_online
2009-01-16 09:39:01 0x00000ab8 INF 1 DBMKnl Sending an administrative statement to the database
0x00000ab8 INF 8 DBMKnl Statement: RESTART
2009-01-16 09:39:07 0x00000ab8 INF 3 DBMKnl Received the result of an administrative statement from the database
0x00000ab8 INF 9 DBMKnl Statement: RESTART
0x00000ab8 INF 10 DBMKnl Returncode: 0
2009-01-16 09:39:07 0x00000ab8 INF 226 DBMSrv DBM Server client disconnect: PID 2720 on computer NLYEHVSCE1NB215.code1.emi.philips.com
Thanks in Advance,
Warm Regards,
Vijay -
Could not start Oracle102iSQL*Plus service on local computer.
Hi,
After installation of SAP on Oracle 10.0.2.0, iSQL*Plus service was running fine,I installed with USER:= Administrator
however after login with <SID>adm, it stopped working.I have tried to login back from Both the Users and running the service by assigning User name and Password to it.But it gave me the same error.
could not start Oracle102iSQL*Plus service on local computer.
Error 1067:The Process terminated unexpectedly
Please help me to resolve this issue.
Thanks
RahulHi,
I couldn't find anything in sqlnet.log,However in Event logs i found the following details
Faulting application isqlplussvc.exe, version 1.0.7.0, faulting module isqlplussvc.exe, version 1.0.7.0, fault address 0x000040b4.
The description for Event ID ( 17 ) in Source ( iSQL*Plus Application Server ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: Failed to find ORACLE_HOME
I have also checked the Environment Variables.
Parameter ORACLE_HOME is also set.
I m using Oracle 10.0.2.0
Please advice
Thanks
Rahul -
When I click on the Services option under Microsoft Management and try to start the FIREFOX SERVICE I get this hiccup:
'''Windows could not start the Firefox Service on Local Computer;
Error 3: the system cannot find the path selected'''
...Any suggestions on how I can hep Windows find that path?
--I have a heck of a time getting windows to signal my Firefox browser--takes several clicks and over 6 or 7 minutes to emerge!
Thank you for your attention.
marlem388Hi again, cor-el--
Many thanks for your help and diligence.
...I went through your advised operations, made sure I didn't delete my Personal Profile, and so on.
--Did not have a hard time uninstalling Firefox, and after I got rid of the downloaded file,
I continued re-installing Ff.
So all you suggested was fine and effective,
'''BUT''' I still get this weird message under Services in Administrative Tools:
'''Windows could not start the Firefox Service on Local Computer; Error 3: the system cannot find the path selected'''
--All the same, despite Local Computer's stubbornness , Firefox does emerge sooner than before, and I have you to thank for it.
Some day I will learn why Error 3 keeps being blind to Ff's path!
marlem388 -
EM console - Could not start the OracelDBConsoleSID service
Oracle 10g, Windows Server 2003
I have problem with EM console. When I restart machine OracleDBConsoleSID is stopped.
When I try to start this service:
Could not start the OracelDBConsoleSID service on Local Computer.
Error 1053: The service did not respond to the start or control request in a timely fashion.
And then this service has status: Staring. EM then work for short time but then again service is stopped.
The Database works without any problems.
Please help!
Thanks in advanceWhen I try to start the service with CMD:
c:\oracle\product\10.2.0\db_1\BIN>net start OracleDBConsoleSID
The OracleDBConsoleSID service is starting.........................................................................
The OracleDBConsoleSID service could not be started.
A service specific error occurred: 1.
More help is available by typing NET HELPMSG 3547.
+++++++++++++++++++++++++++++
In Events - Aplication:
Type: Error
Category: Disk
Event_ID: 6
Description:
An error occured while trying to initialize the service
++++++++++++++++++++++++++++++
======================================
In EM log files…
In OracleDBConsoleSIDsrvc.log
-------------- [OracleDBConsoleSID] ------------
EMDROOT=c:\oracle\product\10.2.0\db_1
ORACLE_HOME=D:\oracle\product\10.2.0\db_1
EMDSTATE=D:\oracle\product\10.2.0\db_1\...._SID
CONSOLE_CFG=dbconsole
TRACE_LEVEL=16
TIMEOUT=15
02/25/10 14:15:45 Job Process API is available
02/25/10 14:15:45 Start pending...
02/25/10 14:15:45 Verifying dbconsole is not started already. Command line "C:\oracle\product\10.2.0\db_1\bin\emctl.bat" istatus dbconsole
02/25/10 14:15:56 dbconsole launch commandline is "C:\oracle\product\10.2.0\db_1\bin\emctl.bat" istart dbconsole
02/25/10 14:15:56 Tracking process launch...
02/25/10 14:16:31 Received exitCode 1 from emctl istatus
02/25/10 14:16:40 Received exitCode 1 from emctl istatus
02/25/10 14:26:24 Received exitCode 1 from emctl istatus
02/25/10 14:26:32 Received exitCode 1 from emctl istatus
02/25/10 14:26:37 Timedout while tracking process to start. Terminating..
In emdctl.trc
2010-02-25 14:26:16 Thread-3200 ERROR http: 1748: Unable to initialize ssl connection with server, aborting connection attempt
2010-02-25 14:26:24 Thread-320 ERROR ssl: nzos_Handshake failed, ret=29024
2010-02-25 14:26:24 Thread-320 ERROR http: 1748: Unable to initialize ssl connection with server, aborting connection attempt
2010-02-25 14:26:32 Thread-2832 ERROR ssl: nzos_Handshake failed, ret=29024
2010-02-25 14:26:32 Thread-2832 ERROR http: 1748: Unable to initialize ssl connection with server, aborting connection attempt
2010-02-25 14:26:36 Thread-3048 ERROR ssl: nzos_Handshake failed, ret=29024
2010-02-25 14:26:36 Thread-3048 ERROR http: 1736: Unable to initialize ssl connection with server, aborting connection attempt
In emagent.trc
2010-02-25 14:26:11 Thread-2240 ERROR ssl: nzos_Handshake failed, ret=29024
2010-02-25 14:26:11 Thread-2240 ERROR http: 1152: Unable to initialize ssl connection with server, aborting connection attempt
2010-02-25 14:26:11 Thread-2240 ERROR pingManager: nmepm_pingReposURL: Cannot connect to https://...:5501/em/upload/: retStatus=-1
2010-02-25 14:26:20 Thread-2508 ERROR ssl: nzos_Handshake failed, ret=29024
2010-02-25 14:26:20 Thread-2508 ERROR http: 1148: Unable to initialize ssl connection with server, aborting connection attempt
2010-02-25 14:26:20 Thread-2508 ERROR command: nmejcn: failed http connection to https://...:5501/em/upload/: retStatus=-1
Edited by: user9106065 on Feb 25, 2010 8:53 AM -
SPP 4.30 windows could not start the rwd uperform monitoring service
Hi, i just install spp 4.30 with two servers, one for the sql databases, and the other for the search server and vignette.
Windows server 2008. 64 bits
All the installation was ok, but when you try to configure the server it doesn't show the web page.
The rwd uperform monitoring service can not start and send the following error:
Windows could not start the rwd uperform monitoring service error 1067.
Any ideas.
thanks
Edited by: Idel Gorodezky on Jun 26, 2011 3:14 AMHi, thanks for the Help, i am sending the logs.
- <Log>
- <Entry Type="Error" Id="f19c1f86-8e6e-4bee-8c18-312e7edb23d2">
<Date>6/27/2011 1:23:09 AM</Date>
<ThreadID>9</ThreadID>
<ErrorCode>24-01-014</ErrorCode>
<RoutineNamespace>RWD.uPerform.CMS.Vignette.VerifyLicense</RoutineNamespace>
<FriendlyMessage>An error occurred while verifying license.</FriendlyMessage>
<Message>The remote server returned an error: (401) Unauthorized.</Message>
<StackTrace>at System.Net.WebClient.DownloadDataInternal(Uri address, WebRequest& request) at System.Net.WebClient.DownloadData(Uri address) at RWD.uPerform.CMS.Vignette.GetBytesFromServer(Uri uri, CredentialSet CredentialsToUse, String postData) at RWD.uPerform.CMS.Vignette.GetStringFromServer(Uri uri, CredentialSet CredentialsToUse, String postData) at RWD.uPerform.CMS.Vignette.VerifyLicense() at RWD.uPerform.WindowsService.QueueMonitor.VerifyLicense()</StackTrace>
<Parameters />
</Entry>
- <Entry Type="Error" Id="2a9ca666-2f94-4cb0-86e9-62254c21e2ec">
<Date>6/27/2011 5:39:02 AM</Date>
<ThreadID>9</ThreadID>
<ErrorCode>24-01-014</ErrorCode>
<RoutineNamespace>RWD.uPerform.CMS.Vignette.VerifyLicense</RoutineNamespace>
<FriendlyMessage>An error occurred while verifying license.</FriendlyMessage>
<Message>The remote server returned an error: (401) Unauthorized.</Message>
<StackTrace>at System.Net.WebClient.DownloadDataInternal(Uri address, WebRequest& request) at System.Net.WebClient.DownloadData(Uri address) at RWD.uPerform.CMS.Vignette.GetBytesFromServer(Uri uri, CredentialSet CredentialsToUse, String postData) at RWD.uPerform.CMS.Vignette.GetStringFromServer(Uri uri, CredentialSet CredentialsToUse, String postData) at RWD.uPerform.CMS.Vignette.VerifyLicense() at RWD.uPerform.WindowsService.QueueMonitor.VerifyLicense()</StackTrace>
<Parameters />
</Entry>
- <Entry Type="Error" Id="7c26d18a-fadf-49f1-8f0f-881ea4d33fa0">
<Date>6/27/2011 10:59:44 AM</Date>
<ThreadID>9</ThreadID>
<ErrorCode>24-01-014</ErrorCode>
<RoutineNamespace>RWD.uPerform.CMS.Vignette.VerifyLicense</RoutineNamespace>
<FriendlyMessage>An error occurred while verifying license.</FriendlyMessage>
<Message>The remote server returned an error: (401) Unauthorized.</Message>
<StackTrace>at System.Net.WebClient.DownloadDataInternal(Uri address, WebRequest& request) at System.Net.WebClient.DownloadData(Uri address) at RWD.uPerform.CMS.Vignette.GetBytesFromServer(Uri uri, CredentialSet CredentialsToUse, String postData) at RWD.uPerform.CMS.Vignette.GetStringFromServer(Uri uri, CredentialSet CredentialsToUse, String postData) at RWD.uPerform.CMS.Vignette.VerifyLicense() at RWD.uPerform.WindowsService.QueueMonitor.VerifyLicense()</StackTrace>
<Parameters />
</Entry>
- <Entry Type="Error" Id="0bd8fe26-8265-4b2e-a192-0b6513eb5ad8">
<Date>6/27/2011 12:01:15 PM</Date>
<ThreadID>9</ThreadID>
<ErrorCode>24-01-014</ErrorCode>
<RoutineNamespace>RWD.uPerform.CMS.Vignette.VerifyLicense</RoutineNamespace>
<FriendlyMessage>An error occurred while verifying license.</FriendlyMessage>
<Message>The remote server returned an error: (401) Unauthorized.</Message>
<StackTrace>at System.Net.WebClient.DownloadDataInternal(Uri address, WebRequest& request) at System.Net.WebClient.DownloadData(Uri address) at RWD.uPerform.CMS.Vignette.GetBytesFromServer(Uri uri, CredentialSet CredentialsToUse, String postData) at RWD.uPerform.CMS.Vignette.GetStringFromServer(Uri uri, CredentialSet CredentialsToUse, String postData) at RWD.uPerform.CMS.Vignette.VerifyLicense() at RWD.uPerform.WindowsService.QueueMonitor.VerifyLicense()</StackTrace>
<Parameters />
</Entry>
- <Entry Type="Error" Id="b8b0694b-5214-4871-9bc6-b8af11dadf6f">
<Date>6/27/2011 1:06:19 PM</Date>
<ThreadID>9</ThreadID>
<ErrorCode>24-01-014</ErrorCode>
<RoutineNamespace>RWD.uPerform.CMS.Vignette.VerifyLicense</RoutineNamespace>
<FriendlyMessage>An error occurred while verifying license.</FriendlyMessage>
<Message>The remote server returned an error: (401) Unauthorized.</Message>
<StackTrace>at System.Net.WebClient.DownloadDataInternal(Uri address, WebRequest& request) at System.Net.WebClient.DownloadData(Uri address) at RWD.uPerform.CMS.Vignette.GetBytesFromServer(Uri uri, CredentialSet CredentialsToUse, String postData) at RWD.uPerform.CMS.Vignette.GetStringFromServer(Uri uri, CredentialSet CredentialsToUse, String postData) at RWD.uPerform.CMS.Vignette.VerifyLicense() at RWD.uPerform.WindowsService.QueueMonitor.VerifyLicense()</StackTrace>
<Parameters />
</Entry>
- <Entry Type="Error" Id="370efaa4-1f71-413c-a027-126b31693932">
<Date>6/27/2011 4:17:07 PM</Date>
<ThreadID>9</ThreadID>
<ErrorCode>24-01-014</ErrorCode>
<RoutineNamespace>RWD.uPerform.CMS.Vignette.VerifyLicense</RoutineNamespace>
<FriendlyMessage>An error occurred while verifying license.</FriendlyMessage>
<Message>The remote server returned an error: (401) Unauthorized.</Message>
<StackTrace>at System.Net.WebClient.DownloadDataInternal(Uri address, WebRequest& request) at System.Net.WebClient.DownloadData(Uri address) at RWD.uPerform.CMS.Vignette.GetBytesFromServer(Uri uri, CredentialSet CredentialsToUse, String postData) at RWD.uPerform.CMS.Vignette.GetStringFromServer(Uri uri, CredentialSet CredentialsToUse, String postData) at RWD.uPerform.CMS.Vignette.VerifyLicense() at RWD.uPerform.WindowsService.QueueMonitor.VerifyLicense()</StackTrace>
<Parameters />
</Entry>
</Log>
<configuration>
<appSettings>
<add key="DataSource" value="fifcrsppdb01" />
<add key="Database" value="uperformGlossarydef" />
<add key="DatabaseEngine" value="SQLserver" />
<add key="DatabasePort" value="1433" />
<add key="DatabaseSchema" value="glossaryPublic10" />
<add key="ConnectionModifier" value=";pooling=false" />
<add key="DatabasePassword" value="Zn4Od3shJCfR6hrx0ALMNg==" />
<add key="DatabaseUser" value="glossaryPublic10" />
<add key="Flags" value="0" />
<add key="SMTPServer" value="172.16.3.114" />
<add key="SMTPDomain" value="16.3.114" />
<add key="HostName" value="FIFCRSPPAP01.ccr.co.cr" />
<add key="HostPort" value="80" />
<add key="HostProtocol" value="http" />
<add key="GlossaryEnabled" value="True" />
<add key="GlossaryUseRTF" value="True" />
<add key="GlossaryDefaultLanguage" value="en-US" />
<add key="VignetteIntegrated" value="True" />
<add key="InstallLocation" value="C:\Vignette\Collaboration\" />
<add key="ErrorLog" value="WWW\uPerformWS\logs\ServerErrors.xml" />
<add key="DataFolder" value="WWW\RWD\Data\" />
<add key="LibraryStructure" value="en-US_rwdDocLib.xml" />
<add key="WorkingLocation" value="WWW\uPerformWS\WorkingFolder\" />
<add key="ErrorMaxSize" value="1000000" />
<add key="ErrorHistory" value="30" />
<add key="GlossaryQueue" value=".\private$\GlossaryQueue" />
<add key="PublishingQueue" value=".\private$\PublishingQueue" />
<add key="ImportExportQueue" value=".\private$\ImportExportQueue" />
<add key="ErrorQueue" value=".\private$\ErrorQueue" />
<add key="UserManagementQueue" value=".\private$\UserManagementQueue" />
<add key="Transforms" value="WWW\uPerformWS\ms\PublishingData\Base Static\xml\transforms" />
<add key="CurrentVersion" value="4.30" />
<add key="TrustAllCertificates" value="True" />
<add key="WebRequestTimeout" value="600000" />
<add key="LdapAuthentication" value="ServerBind" />
<add key="WordtoHTML" value="True" />
<add key="WordtoPDF" value="True" />
<add key="PPTtoPDF" value="True" />
<add key="ExceltoPDF" value="True" />
<add key="WordtoSource" value="True" />
<add key="PPTtoSource" value="True" />
<add key="ExceltoSource" value="True" />
<add key="PublishedContent" value="WWW\ucontent\" />
<add key="PublisherConfig" value="WWW\uPerformWS\ms\PublishingData\configuration files\transformation.settings" />
<add key="Templates" value="WWW\uPerformWS\ms\PublishingData\Base AppData\templates\" />
<add key="BaseStatic" value="WWW\uPerformWS\ms\PublishingData\Base Static\" />
<add key="BaseAppData" value="WWW\uPerformWS\ms\PublishingData\Base AppData\" />
<add key="PensListenerPath" value="WWW\uPerformWS\" />
<add key="Upgrade" value="WWW\uPerformWS\ms\PublishingData\Upgrade\" />
<add key="EnableDocSIM" value="True" />
<add key="EnableDocXHTML" value="True" />
<add key="EnableDocPDF" value="True" />
<add key="EnableDocWORD" value="True" />
<add key="EnableDocPPT" value="True" />
<add key="EnableCourseSIM" value="True" />
<add key="EnableCoursePDF" value="True" />
<add key="EnableCourseWORD" value="True" />
<add key="EnablePPTXsource" value="True" />
<add key="EnablePPTXpdf" value="True" />
<add key="EnableXLSXsource" value="True" />
<add key="EnableXLSXpdf" value="True" />
<add key="EnableDOCXsource" value="True" />
<add key="EnableDOCXhtml" value="True" />
<add key="EnableDOCXpdf" value="True" />
<add key="SystemPassword" value="" />
<add key="IntegrationEnabled" value="False" />
<add key="IntegrationUserName" value="" />
<add key="IntegrationPassword" value="" />
<add key="IntegrationURL" value="" />
<add key="IntegrationOutgoingPolicy" value="" />
<add key="IntegrationIncomingPolicy" value="" />
<add key="PolicyFile" value="WWW\uPerformWS\wse3policyCache.config" />
<add key="WebRequestQueryString" value="SMSESSION=NO" />
<add key="SiteMinderCookie" value="SMCHALLENGE" />
<add key="SiteMinderDomain" value="" />
<add key="TivoliCookieName" value="" />
<add key="TivoliCookieDomain" value="" />
<add key="TivoliWebSEALJunction" value="" />
<add key="TivoliWebSEALBaseURL" value="" />
<add key="AuthenticationType" value="Basic" />
<add key="LDAPTimeout" value="10" />
<add key="UserPageSize" value="2000" />
</appSettings>
</configuration> -
Today I installed Adobe Director 11.5. I received a couple of errors in the FLEXnet Licensing Service. It looks It could not start. I tried to download the Licence fix what I found on Google but that doesn't work, so I checked the 'Service' at service (windows).
It's status is empty. When I double click on the FLEXnet Licensing Service, clicked on start at the opened window and an error is coming:
Windows could not start the FLEXnet Licensing Service service on Local Computer
Error 1068: The dependency service or group failed to start.
I don't understand what it says with this message, only that it is impossible to start. However, that is not what I am trying of course, I want to start the FLEXnet Licensing Service, service.
Re-installing of the software, doesn't make any change. How can I start it so Director is also working?Hi Don1233,
Please consider seek help at the software vendor side.
For the services didn't start, follow the suggestions posted by Elton in the thread below:
https://social.technet.microsoft.com/Forums/en-US/e35da253-f0df-41d1-8df2-b73fa54742a0/windows-could-not-start-the-flexnet-licensing-service-service-on-local-computer-error-1068-the?forum=w7itproinstall
Best regards
Michael Shao
TechNet Community Support -
Using Windows 8.1 Pro on Toshiba Satellite i7 Laptop with 8Gb Ram
After upgrade from Windows 8 Pro to 8.1 Pro, the Offline Files/CSC service refuses to start and gives the error message:
"Windows could not start the offline files service on local computer. Error 3: The system cannot find the path specified"
Before the upgrade, offline files worked fine... how do I re-enable offline files?I had a similar issue - couldn't make any files available offline.
I found that the offline folder service would not start
This was because the CSC permission were totally screwed. I had to take ownership of each folder and file, one by one, then grant everyone full access.
then delete the full contents of the CSC folder
format the CSC database using the registry fix then reboot
in control panel, disable the offline files, reboot, then re-enable. and now its working :)
2hrs to resolve this, with grateful thanks to this thread and some others.
damn windows8 -
Windows could not start the distributed transaction coordinator service on local computer
Dear All,
I'm having an issue starting the DTC service in windows 7 OS. I always got the error message below when im trying to start it.
"Windows could not start the distributed transaction coordinator service on local computer"
Thanks,
MelvinHi Melvin,
Please try the following methods to solve this issue:
Method 1: Re-create the MS DTC log, and then restart the service.
Click
Start, type cmd in the search box, and then press
Enter.
Type the command
msdtc -resetlog at the command prompt, and then press
Enter.
Warning: The msdtc -resetlog command can cause data corruption if it is used incorrectly. Make sure that you do not have any pending transactions when you run this
command.
Type the command net start msdtc, and then press
Enter.
Method 2: Set the logon account permissions for the MS DTC service
If Method 1 does not resolve the problem, set the logon account for the MS DTC service to have read and write permissions for the Msdtc.log file. Please follow the steps below:
Click
Start, type cmd in the search box, and then press
Enter.
Type the command
control admintools at the command prompt, and then press
Enter.
Double-click
Services.
In the Services pane, locate
Distributed Transaction Coordinator.
In the
Log On As column, note the account name. Note: The default logon account for the MS DTC service is the NETWORK SERVICE account.
Start Windows Explorer, and
then open the %windir%\System32\Msdtc folder.
Right-click the
Msdtc.log file, and then click Properties.
Click the
Security tab.
Click the logon account name that you noted
in step 5. For example, click the NETWORK SERVICE account name.
In the
Permissions pane, click to select the Allow check box for the following permissions: ◦Read & Execute
◦Read ◦Write
Click
OK.
Click
Yes to accept the security warning.
In the
Services pane, right-click Distributed Transaction Coordinator, and then click
Start.
Method 3: Assign permissions to the NETWORK service to traverse the directory tree
Determine whether the NETWORK service has permissions to traverse through the folder. To do this, follow these steps.
Note: By default, the "Everyone" group has these permissions. For more information, go to the following Microsoft TechNet website:
Bypass traverse checking
Click
Start, type secpol.msc in the search box, and then press
Enter.
Browse through the following computer configuration:
\Windows Settings\Security Settings\Local Policies\User Rights Assignment
Check for "Bypass traverse checking," and then add the "Everyone" group.
Update the Group Policy settings on the computer. To do this, click
Start, type gpupdate in the search box, and then press
Enter.
In the
Services pane, right-click Distributed Transaction Coordinator, and then click
Start.
Regards,
Lany Zhang
Maybe you are looking for
-
How to send error message via a mail to the customers email id
HI experts , i have a requirement,In idoc where i have to send the error message via email to a perticular emailid? please help me n tell also which fm is used for that? Thanks RAhul Sisodia
-
Weblogic Integration 10r3 error in msg-header-2_0.xml
Hello, I am trying to go through te WLI workshops, but cannot publish a WLI process. The Tutorial_Process_Application RequestQoute.java has the following error in the msg-header-2_0.xml: Severity and Description Path Resource Location
-
Email message in the body of the email does not appear
The plug to the BBQ appliance under the bench in the alfresco is not compatible can this be checked Glass missing to the canopy when will it be completed
-
ARD 3.6.1 broken in Mac OS X 10.7.5
I upgraded my client from 10.7.4 to 10.7.5. ARD 3.6.1 can't connect anymore to a Mac OS X server 10.6.8. Someone an idea how I an fix that?
-
Saving crop setting to a preset is not an option in my Lightroom 5. Why not?
I've seen crop checkbox on other versions and even on the current help but it's not on my Lightroom 5 that I'm using on my PC. Did they take it away?