Windows CS6 "save as" action always defaults to last save place instead of saving where action is intended to. Please help

Hi all,
I am using CS6 64bit on a Windows 7 Enterprise machine at work. I have used Macs here for years and never had this problem but when I create an action that is designed to "save as" (because I must change the file name) a single file into a specific directory on the network Photoshop always defaults to saving into the last place I saved instead of saving into the place where the action tells it to save to. The action contains 2 saves and then a close and only the first save brings up the dialogue so we can change the name of the file. That dialogue box always contains the last save location instead of the desired location the action is intended to save to. The second save always goes to the correct place and the close works fine.
The only time this does not happen is when Photoshop is first launched. In that case when I click the action it always tries to save into the original folder on the network where I opened the file from.
I have already unchecked the box in preferences for "save as to original folder" and do not know what else to try.
Previously on Macs I have never experienced this issue at all. I have been opening files on my network and saving them to other network directories for years over many different versions of Photoshop on a Mac and not once have I had an issue. Is it a PC thing? Is there something else I can try? I need to deploy these PC's to employees and can not do so unless this action works as we process high volumes of images and do not have the time to navigate manually to each directory we must save in.

Welcome to the club! I hate that but live with it.
When I download from the camera, Photoshop Bridge generates a folder according to the date shot, say 20141212. The images then are 20141212_1 to 20141212_xxx; whatever the final count is from the download. But let's say I rename the image or perhaps have a Photomerge of several frames. Then the connection is lost and Photoshop reverts to the last folder before the current one. So one has to watch to steer that "Save As" to the one you want, in this case 20141212. However, after that occurs, subsequent Saves will go to folder, 20141212. (because it is now the last one)
The principle I follow is that if the folder with the images is new, I am careful with "Save As" if the file I am saving is not directly connected with that folder"s numbering system.

Similar Messages

  • How do i set a default time of 2.0 seconds for all transitions in iMovie 10.  Please help.,

    how do i set a default time of 2.0 seconds for all transitions in iMovie 10.  Please help.,

    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    If you do not keep changes after a restart then see:
    *http://kb.mozillazine.org/Preferences_not_saved
    *https://support.mozilla.org/kb/Preferences+are+not+saved

  • I installed windows 7 on my macbook pro. all is working but lan adaptor and sound od laptop is not working. please help me or send the link where i can download the these drivers.

    I installed windows 7 on my macbook pro. all is working but lan adaptor and sound od laptop is not working. please help me or send the link where i can download the these drivers.I have lost my resource cd .

    If you are running Lion or Mountain Lion, the drivers are downloaded from within Bootcamp Assistant. If you are running Snow Leopard the drivers are on your Snow Leopard install disk.
    Read the Bootcamp Install Guide for your version of OSx. http://www.apple.com/support/bootcamp/
    Bootcamp questions should be asked in the Bootcamp forum where the Bootcamp gurus hang out https://discussions.apple.com/community/windows_software/boot_camp

  • Attempting to download Premiere CC on a second computer while my primary one is being repaired. Computer had CS6, I removed it. Now Creative Cloud thinks it's already downloaded and it is not. Please help.

    Attempting to download Premiere CC on a second computer while my primary one is being repaired. Computer had CS6, I removed it. Now Creative Cloud thinks it's already downloaded and it is not. Please help. <Removed by Moderator>

    You will need to provide more information if the following does not match your situation.
    CC desktop lists applications as "Up to Date" when not installed
    http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.html

  • HT1414 hi everyone , having trouble with restoring my iphone, i did follow the step untul extracting the update software but when the iphone start to restoring my iPhone always turn off and it say Error 21 on my PC monitor ...please help me icannot get my

    hi everyone , having trouble with restoring my iphone, i did follow the step untul extracting the update software but when the iphone start to restoring my iPhone always turn off and it say Error 21 on my PC monitor ...please help me i cannot get my iPhone turn on

    Error 20, 21, 23, 26, 28, 29, 34, 36, 37, 40
    These errors typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.

  • I need the drivers for earl 2011 macbook pro 13 inch i7 4 gigs for windows 7 64 bits i tried downloading with bootcamp butt it never completes allways ends up with an error please help

    i need the drivers for earl 2011 macbook pro 13 inch i7 4 gigs for windows 7 64 bits i tried downloading with bootcamp butt it never completes allways ends up with an error please help if any one has the drivers or knows were i can download them

    Doug...
    If you don't have it for reference, the manual might come in handy > US/Boot_Camp_Install-Setup.pdf
    After it loads, Command + F to find information regarding the drivers.

  • Hi...i cannot connect to my imessage it always show a message says network error even though i have a network..please help..tnx..

    Hi...i cannot connect to my imessage it always show a message says network error even though i have a network..please help..tnx..
    [email protected]

    Both parties must be connected to wifi to use FaceTime (and you must have FaceTime turned on in Settings>Facetime).  If you're phone shows 3G at the top when it's on, you're not connect to wifi; you'll have to solve that problem first.

  • I do a movie whith iMovie. I finalize the project and I pass it to iDvd. Then I do a little menu and I burn my DVD. When I play my DVD on a computer or in my TV it ALWAYS begins directly with the movie and not with the menu... PLEASE HELP!!!!

    I do a movie whith iMovie. I finalize the project and I pass it to iDvd. Then I do a little menu and I burn my DVD. When I play my DVD on a computer or in my TV it ALWAYS begins directly with the movie and not with the menu... PLEASE HELP!!!!

    Go to the Map mode in your iDVD project and make sure the blue bin at the left is empty.  That's where you drag slideshows to if you want the DVD to open immediately to that slideshow and bypass the menu. 
    Click to view full size
    If there is an item in there drag it out.
    OT

  • Tried to install iTunes 10.5 this morning but an error appeared saying "problem with windows installer package. A program required for this install to complete could not be run." Can someone please help

    I tried to install iTunes 10.5 this morning but an error appeared saying "problem with windows installer package. A program required for this install to complete could not be run." Can someone please help

    Firstly, are you installing iTunes for the first time or are you updating your current version of iTunes?
    If you're installing iTunes for the first time have you tried redownloading the installer package? Perhaps the file you downloaded originally is corrupted...
    http://www.apple.com/itunes/
    If you've tried that, then try installing iTunes as your computer's administrator. To do this right-click the install package and choose "Run as administrator".
    If you're updating iTunes to the most recent version try repairing the Apple Software Update program on your computer. It's under the add/remove programs.
    1. Open the control panel
    2. Open Add/Remove programs (called "Programs and Features" in Windows 7)
    3. Navigate to "Apple Software Update" in the list and click on it
    4. Click on "Change" then select "Repair" (or just select the repair option in Windows 7)
    Once you repair this, try running iTunes and the update again.
    Fingers crossed!

  • HT2521 A pop up window in my safari is not closing. Even after several clicks on OK it keeps popping up. And the open window is not allowing me to use the Safari nor is it allowing to restart/Shutdown the Mac. Please help me rectify this error.

    A pop up window on my Safari does not close even after several clicks on OK... this window keeps popping up and is not allowing using the safari nor is it alowing to close the browser. The open Safari is also not allowing to restart or shutdown the notebook. Please help me rectify the problem.

    Force Quit .
    Press command + option + esc keys together at the same time.    Wait.
    When Force Quit window appears, select  Safari, if not already.
    Press Force Quit button at the bottom of the window.      Wait.
    Application will quit.
    If this does not help, press the power button for 7 or more seconds.
    Computer will shut down.
    Restart.
    Hold the shift key down and launch Safari.
    Best.

  • I have Dreamweaver CS5 with Windows 8 and it won't stay connected to the server and it says I need flash plug in, please help

    I have a Gateway computer with Windows 8 installed.  I have installed Dreamweaver CS5 to manage my website and it won't stay connected to the server.  It also won't play flash and says I need a flash plug in.  Please help

    #1  Try toggling Passive FTP on/off in your remote server's site definition.
    #2 Except for a handful of gaming sites, Flash is a dead web technology.  It's not supported by iPhone, iPad, iTouch, Android, etc...  I don't recommend using Flash for anything these days.  Better to use HTML5, CSS level 3 and JavaScript.
    Nancy O.

  • TS1814 I can't seem to get the drivers downloaded on my windows laptop for my iphone 5s, the info is coming up generic and im getting a code 1.  Please help

    I can't seem to get the drivers downloaded on my windows laptop for my iphone 5s, the info is coming up generic and im getting a code 1.  Please help

    All necessary drivers are included in the iTunes install package.
    Please clarify exactly what the problem is.
    the info is coming up generic and im getting a code 1
    That's not very informative.

  • Since Firefox just upgraded, every LINK opens in a new window instead of a new or current tab. PLEASE HELP

    Since install of version 3.6.8, every link I click on opens a new window instead of the current or new tab. No changes in my settings were made. I had no problems until the 3.6.8 was installed.

    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
    If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
    You have to close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

  • IChat always makes me enter an AOL password. I DON"T USE AOL. Please help

    When ever I try to make my iChat status to available a box pops up with the heading AOL Instant Messenger password and under it it says iChat can’t log in to (my account) because your login ID or password is incorrect. My iChat password is only 7 characters. This is really frustrating. I don't have an AOL account and my iChat is under mac.com. PLEASE HELP

    HI,
    If in iChat > Preferences > General Section you elect to have all the Buddy List gathered  in one list
    then they can look like this.  (It is Default to Collect them in one list)
    Uploaded with Skitch!
    As you can see my GoogleTalk ID has dropped out  (Not a Status setting by me to Off Line or anything else)
    It has the Sharply pointed Tilde like Symbol ~
    Clicking that symbol confirm it is Off Line and that I should wait a few minutes and try again.
    As you have a different Message it would seem that iChat is not accessing the KeyChain Properly.
    Open Keychain Access in Application/Utilities
    Highlight Login in the top left area if needed.
    Highlight Passwords in lower left in needed.
    Find the @mac.com name in th eright hand panel
    Highlight and then use the i Button
    In the new Panel, tick the Show Password Box
    (enter your Password for your Login and Allow Once Button)
    Does the Password now Show Up ?
    Is it what you think it is ?
    Edit if required and Save.
    We may need to check if you have Ownership and Read and Write permissions on the Keychain if that does not help.
    It is late where I am and it will be a while before I get back to further replies.
    10:43 PM      Thursday; March 8, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Lion 10.7.3)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • Script to Perform Live Trace then in Illustrator Run Action... Please Help

    Hello Everyone, I am brand new to scripting and need some help... I would like to create an inter-application javascript (.jsx) file that will perform the following steps in sequence:
    1) Target Bridge CS3 and:
    a) Automatically select files (thumbnails) (the names of, and path to these files never change so scripting them is no problem). Path & Files are: C:\files\1.psd, C:\files\2.psd and C:\files\3.psd.
    b) Run Tools > Illustrator > Live Trace [Live Trace Dialogue Box Settings (Tracing Preset: Color 16, Save & Close Results (checked), Document Profile: "Basic RGB", Width: "576", Height: "720", Units: Pixels, Destination: "C:\files\, File Naming: Document Name + .ai)].
    After Live Trace finishes, C:\files\1.ai, C:\files\2.ai and C:\files\3.ai are created.
    and then....
    2) Target Illustrator CS3 and:
    Run my Illustrator precreated Action: "Add Border". This action adds a precreated border to the files. The action is coded with the paths and file names of the .ai files as well as saving instructions.
    To summarize:
    1) In Bridge, run Live Trace on precreated .psd files
    2) In Illustrator run an action on the files that were live traced
    That's it. It seems straight forward when I write it out but trying to figure out how to script it is boggling my mind.
    Thank you for your help!

    I will go check that error meantime try this… The Photoshop export looks OK to me but I have no idea about SVG files as I don't use them… This should be getting closer… You will need to make the same 2 typo changes…
    #target illustrator
    while (app.documents.length) {
      app.activeDocument.close(SaveOptions.PROMPTTOSAVECHANGES);
    var traceFolder = new Folder ('~/Desktop/Live Trace/');
    var fileList = traceFolder.getFiles(/\.psd$/i);
    if (fileList.length > 0) {
         var svg = new Folder(traceFolder.fsName+'/SVG Files');
         if (!svg.exists) svg.create();
         var psd = new Folder(traceFolder.fsName+'/PSD Files');
         if (!psd.exists) psd.create();
         var ai = new Folder(traceFolder.fsName+'/AI Files');
         if (!ai.exists) ai.create();
         main(fileList);
    } else {
         alert('This Folder contained NO Photoshop PSD files!');
    function main(fileObjs) {
         with (app) {
              var orginalUIL = userInteractionLevel;
              userInteractionLevel = UserInteractionLevel.DONTDISPLAYALERTS;
              for (var i = 0; i < fileObjs.length; i++) {
                   if (fileList[i] instanceof File) {
                        var fileName = fileList[i].name.slice(0, -4);
                        var docRef = documents.add(DocumentColorSpace.RGB, 576, 720);
                        with (docRef) {
                             var thisPlace = placedItems.add();
                             thisPlace.file = fileObjs[i];
                             var thisImage = placedItems[0].trace();
                             redraw();
                             thisImage.tracing.tracingOptions.loadFromPreset('Color 16');
                             thisImage.tracing.expandTracing();
                             redraw();
                             var svgOptions = exportAsSVGFile();
                             svgFilePath = new File(svg.fsName + '/' + fileName + '.svg');
                             exportFile(svgFilePath, ExportType.SVG, svgOptions);
                             var psdOptions = exportAsPSDFile();
                             psdFilePath = new File(psd.fsName + '/' + fileName + '.psd');
                             exportFile(psdFilePath, ExportType.PHOTOSHOP, psdOptions);
                             var aiOptions = saveAsAiFile();
                             aiFilePath = new File(ai.fsName + '/' + fileName + '.ai');
                             saveAs(aiFilePath, aiOptions);
                             close(SaveOptions.DONOTSAVECHANGES);                         
              userInteractionLevel = orginalUIL;
    function exportAsSVGFile() {
         var svgOptions = new ExportOptionsSVG();
         with (svgOptions) {
                compressed = true;
              coordinatePrecision = 3;
              //cssProperties = SVGCSSPropertyLocation.ENTITLES;
              documentEncoding = SVGDocumentEncoding.UTF16
              //DTD = SVGDTDVersionSVG1_0;
              embedRasterImages = true;
              fontSubsetting = SVGFontSubsetting.ALLGLYPHS;
              fontType = SVGFontType.CEFFONT;
              includeFileInfo = false;
              includeVariablesAndDatasets = false;
              optimizeForSVGViewer = true;
              preserveEditability = true;
              slices = true;
              sVGAutoKerning = true;
              sVGTextOnPath = true;
         return svgOptions;
    function exportAsPSDFile() {
         var psdOptions = new ExportOptionsPhotoshop();
         with (psdOptions) {
              antiAliasing = true;
              compatibility = PhotoshopCompatibility.PHOTOSHOP8;
              editableText = true;
              embedICCProfile = true;
              maximumEditability = true;
              resolution = 150;
              warnings = true;
              writeLayers = true;
         return psdOptions;
    function saveAsAiFile() {
         var aiOptions = new IllustratorSaveOptions();
         with (aiOptions) {
              compatibility = Compatibility.ILLUSTRATOR12;
              compressed = true;
              embedICCProfile = true;
              embedLinkedFiles = true;
              flattenOutput = OutputFlattening.PRESERVEAPPEARANCE;
              fontSubsetThreshold = 0;
              overprint = PDFOverprint.PRESERVEPDFOVERPRINT;
              pdfCompatible = true
         return aiOptions;

Maybe you are looking for

  • Missing Tables and Indexes greyed out in DBACOCKPIT

    Hi All, I use Solution Manager 7.01 with MS SQL Server 2008 DB. I want to monitor with DBACOCKPIT a MS SQL Server 2005 DataBase of a SAP BPC 5.1. I connected the DB but in DBACOCKPIT some functionality are greyed out. I want to use in Diagnostics sec

  • Problems with template

    I have made some changes in my Template file ( dwt) and normally then i save it, it ask for update changes in all other files build on this template, but not after I have upgrade til Dreamweaver CS3 - Why ? Have I the possibility to force this action

  • Version 1.2.0.2998 Format SQL (Ctrl-B) bug

    When I invoke this feature on any of my packages, part-way through it stops un-indenting the "END;" statements at the end of functions in the package body, so each subsequent function is indented one level more than the one before. It seems to handle

  • Selecting multiple photos to upload to web album

    I need to upload a bunch of photos to Shutterfly. I want to view the images in iPhoto in "full screen view" (since the thumbnail view is too small to tell if I'd want to add the particular file to the Shutterfly album) and select photos as I flip thr

  • Channel Templete,IS

    Hi All, I need to configure close to 30 objects which has a same flow ie pick up an xml idoc invoices file from JMS Queue and post idoc. Now to minimise the effrort we had a common design object for Mapping and interfaces. I made an Intregation Scena