Windows Defender Alert on Boot

Hello,
I'm getting the following message when I first log into my computer:
Windows Defender:
This app has been turned off and isn't monitoring your computer. If you're using another app to check for malicious or unwanted software, use Security and Maintenance to check that app's status.
Currently I'm using Avira Antivirus. So I did what the message said and looked at Security and Maintenance in the control panel. There it displays the Virus Protection is On Avira Desktop is turned on. And Spyware and unwanted software protection is On,
Avira Desktop is turned on.
So how can I get the window's defender message to go away?
Thanks in advance.

Thanks for looking into this.
I went into the Control Panel and searched for Windows Defender. When I try to click on it I get the same "This app has been turned off and isn't monitoring your computer." error.
This made me think that the issue was that Windows Defender is attempting to launch even though I have other software in place. So I went to the Task Manager and Startup and disabled Windows Defender there. I guess this should have automatically happened
when I installed AVIRA but didn't. Perhaps this issue arises when you uninstall one Antivirus and then install another without a Reboot in-between. In this case I was removing either AVG or AVAST and installing AVIRA. Please let me know if this sounds
plausible.
Thanks,

Similar Messages

Windows Defender alerts to send firefox.exe to microsoft after upgrading to 16.0.2

Windows Defender posted an message in Windows Action Center with a title "Review the files that Windows Defender will send to Microsoft (Important)"
This showed a popup message that informed that Windows Defender needed to make a Sample Submission of the following files:
"Mozilla Firefox\Firefox.exe"
"Mozilla Firefox\plugin-container.exe".
This happen both in my Desktop PC (Win 7 x64 SP1 Ultimate) and in my Laptop (Win 7 x64 SP1 Home), the difference being that in the Laptop's case one additional file was required to be reported i.e. "Mozilla Maintenace Service\maintenanceservice_tmp.exe"

hello shadownate, i think this is a normal process when you are a [http://windows.microsoft.com/en-US/windows-8/join-maps-community member of MAPS (Microsoft Active Protection Service)] and chose to submit information about unknown applications. in case microsoft defender comes across an application version that doesn't show up in ms' database yet (which might well be the case for firefox executables immediately after an update), they upload the file and analyse it - this is the way they gather new information to create signatures for unknown threats. Plugin-container.exe & maintenanceservice.exe are part of firefox and won't pose a risk to your system.

Windows Defender won't run on Twist after updating BIOS to 1.52.1.52

I ran a Windows Defender scan last night, all worked fine.
Today, I used Lenovo's system update to update the BIOS to 1.52.1.52. Immediately after the reboot, I tried another Defender scan.
It wil not complete: early into the scan, the fan speed increases and the Windows Defender service shuts down, bringing up the red "PC is at risk" banner and effectively killing the scan.
It's pretty clear that you need to issue an update/fix and FAST - my PC is no longer being protected!

Quote from: maz on 10-March-06, 02:24:20
I downloaded the w9620nms.110 version BIOS from the MSI website and flashed the BIOS. Since that time, Windows XP Pro will not load successfully. I re-flashed to go back to the 1.00 version and even tried the 1.26 version I got from this site. Each time it still didn't work. I cleared the CMOS and retried. Still no good.
I reformatted the windows partition on the HDD (nVidia RAID stripe) and reinstalled windows. The installation seemed to go fine, but when the system tried to load Windows, it failed again. Just keeps re-booting.
Is there some setting in the BIOS that got changed in the flash that I'm missing that effects this? A setting that needs changing back (other than the SATA RAID which I've re-set and whish is recognized by windows and the BIOS).
Or, it is possible the RAID stripe was corrupted somehow?
The system worked for several months before the flash.
Any help on this is much appreciated!!
Running:
K8N Master2 FAR (v1.00 original worked, now v1.00, 1.10 and 1.26 current, don't work)
Single, Dual Core AMD Opteron 265
1x1GB Kingston kvr400d4r3a PC3200 RAM
Antec Neo HE 550 power supply
1x EVGA GeForce 7800GT (non-SLI enabled)
2x 250GB WD SATA-II HDD (nVidia RAID stripe) in two partitions
Sony DVD-RW
Windows XP Professional
Thanks,
Mark
i have the same problem.... also i trie with win2000 an don,t reboot but halt on

Can windows 8.1 in boot Camp display in target display mode on an IMac?

I have given up on Windows 7 running in Boot Camp on my 15" MacBook Pro and displaying it on my 27" IMac via thunderbolt and Target Display Mode.
The FAQ concerning Target Dsiplay Mode farily clearly says Windows 7 won't work.
But it does not say Windows 8.1 will or will not drive Target Display Mode via thunderbolt.
see: http://support.apple.com/kb/HT5219, question 29
Has anyone found that running Windows 8.1 in BootCamp on a MacBook Pro Retina mid 2012 will display via a thunderbolt cable in to Target Display Mode on a late 2013 IMac 27"?
I don't want to go to the trouble of installing Windows 8.1 and trashing my otherwise functional Windows 7 Boot Camp installation unless it is going to display properly on my late 2013 27" IMac running OSX 10.9.3 via thunderbolt.
Thanks in advance!

no, tdm doesn't work under bootcamp regardless of which windows is being used, imho i don't think it will ever work under bootcamp

Problems with Windows XP SP3 in Boot Camp

Hi,
I have recently received a 21.5" iMac; it is the higher-end of the 21.5" standard configurations. The problems I am having, I believe, specifically relate to drivers.
Firstly, I get no sound whatsoever in Windows XP SP3 (boot camp); I have tried removing and reinstalling the drivers from the Snow Leopard install disc, but no success. I have no yellow question marks in the device manager window, but the absence of audio still persists.
Secondly, I cannot gain access to the special functions of the Apple wireless keyboard in Windows XP SP3 via Boot Camp. Again, I have tried reinstalling the drivers, but no success. I have read an Apple support document which states that the keys are only supported on late 2009 Macs; I own one of these Macs, so that cannot be the problem.

Problems with Windows XP SP3 in Boot Camp
Boot Camp forums are here: http://discussions.apple.com/category.jspa?categoryID=237

I have a copy of Windows 7, and I am trying to bring up Boot Camp on my MacBook with Snow Leopard. But my Snow Leopard install disk is too old for Windows 7, so attempted Boot Camp install of drivers fails.

I have a copy of Windows 7, and I am trying to bring up Boot Camp on my MacBook with Snow Leopard. But my Snow Leopard install disk is too old for Windows 7, so attempted Boot Camp install of drivers fails.
I have hand-installed the NVidia graphics driver, and I have keyboard, minimal trackpad, and hardwire to internet all working. So the WIndows machine is usable. But I am hurting for wi-fi, better trackpad, and whatever else is delivered by Boot Camp. I can't use any of the Boot Camp upgrades because I do not have XP or Vista.

While we all have MacBooks in this forum not all of us use Boot Camp. There's a Boot Camp Support Community where everybody uses Boot Camp. You should also post this question there.
https://discussions.apple.com/community/windows_software/boot_camp

I bought macbook pro at cash america used and loaded with windows 7 ultimate by boot camp.My questions is it has mountain lion loaded but original ower has name with password so how can I reload so I can sign on as administrator for downloads and upgrades

I bought a 13 inch macbook pro9.2 at Cash America with windows 7 Ultimate with boot camp program.
The Mac op sytem has Mountain Lion installed but the previous ower has his name and password attached to it and can only use as guest.
My question is how do I get around this to be administrator to reload software so i can use mountain Lion,and not loose the windows op .

If you reformat the partition that contain Mountain Lion and reinstall Mountain Lion, it should not effect the Windows pratition.
Have said that I suggest you backup everything you might want to save just in case.
Allan

I have disabled all Kaspersky security, windows firewall and windows defender and Itunes still will not update my Ipod touch 4th gen to IOS 5, Helppppp!

I can't get the IOS 5 to work for windows Vista. I'm running kaspersky pure 2.0, windows firewall and windows defender. I have turned them all off, I then attach my Ipod 4th gen and I get the "cannot connect to itunes update server". I ran diagnostics in itunes and it tells me I dont have a internet connection. I'm on the internet right now, and I DO have a internet connection, but it tells me Itunes says otherwise. I'm able to send this message on the same pc with internet connection but keep running into this error. I have now read discussiong boards through apple and disabled all my firewalls, still no luck. I was able to update the lates version of itunes, and just waiting to get my ipod updated now, please help me.

On the computer you should be able to go to the network properites. Go to the TCP part and unchec the line that says obtaind DNS automatically and check the one that says use the following. Add the 8.8.8.8 and Google other 8.8.4.4.
For more info see:
https://developers.google.com/speed/public-dns/

Windows Defender Beta 2 Stops iTunes 6.03 From Installing Completely

Hey,
There is a bug with Windows Defender Beta 2 and iTunes.
I thought I would tell apple and Microsoft about it. Check microsoft beta newsgroups.
When you install iTunes 6.03 and have Windows Defender Beta 2 running it will cause iTunes setup to error with the following:
http://img324.imageshack.us/img324/2262/itunesinstallerror5it.png
Clicking ok and install continues like normal and iTunes is installed ok. Have not run into any problems because of the errror in iTunes.
Now after installing iTunes Windows Defender Beta 2 flags its install since its trying to install a service.
See:
http://img324.imageshack.us/img324/8954/windowsdefenderbeta2allowerror.png
And:
http://img324.imageshack.us/img324/5468/windowsdefenderbeta2allowerror1.png
So here is to hoping Apple and Microsoft work this out sooner than later.
Take Care,
Will
Custom Build Windows XP Geforce 6800

Katrina--Correct me if I'm wrong but there is no way to turn off the new Windows Defender software (it's the replacement for the Microsoft Anti-Spy beta software). Fortunately, I already had iTunes 6.02.23 installed before I installed Windows Defender earlier this week. I had some big problems accessing the music store yesterday, but I've resolved them. (And I really don't think Defender was causing the problems. I think the music store home page was overwhelmed by people participating in the current contest.) If there's a conflict between Defender and iTunes it helps those of us using both to know this. Then we can figure out troubleshooting solutions to resolve the problem. If we come up with workarounds, it helps everyone on this board, doesn't it?
P.S., I understand Spybot has problems with the newest version of iTunes too. The mini-store is the culprit. I don't think these programs prevent you from using iTunes they just don't like some of the features in the mini store--so they warn you about them.

Error Message 0x80073afc trying to open Windows Defender

I was working on my mother's computer and somehow Windows Defender got turned off. There is spyware all over the computer, on every website popups, ads, highlighted words that lead to websites. I tried turning on Windows Defender, but I get this
message: "An error has occurred in the program during initialization. If this problem continues, please contact your system administrator." Error Code: 0x80073afc
I would like to know how to get Windows Defender to work properly and to rid my mother's computer of all of this. I tried system restore and it only goes back a couple of weeks. I did Microsoft Safety Scanner, and it removed at least 2 viruses.

Hi McWeid,
According to your description ,it seems that the machine has been injected by virus .
I suggest to run the Microsoft Safety Scanner in safe mode .
To get into safe mode ,restart the machine and keep pressing "Shift",troubleshoot ,advanced ,startup settings ,then restart to choose safe mode with network.
Then we can run "dism /online /cleanup-image /restorehealth" or "sfc /scannow"to check the health of the whole system files .
Best regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Desktop PC with Windows Vista won't boot up

My Acer Aspire 180 Desktop PC with Windows Vista won't boot up and has a Recovery error message that says it shut down unsuccessfully. Can someone help me with this issue?

If you have Recovery Disk then try to repair install. If you do not have then you have to contact Acer Support for getting them.
Once it is recovered you must update the Graphic Card Driver. Visit the website of the Graphic Card manufacturer to update it.
S.Sengupta, Windows Experience MVP

Windows 8 will not boot

Windows 8 will not boot, gives Bad_System_Config_Info error.
It will not boot from disk, let me refresh, or let me reset my windows system.
A couple of times i have gotten windows to boot from the disk and it asks if i want to instal windows 8 or there is a tab to repair my computer.
Should i just go ahead and click instal windows 8, and then backup that fresh instal with my backup drive?
Or will this complicate the problem?.........
I am running OS X 10.8.3 Macbook pro retina
Thanks
Todd

Wow, how about you guys just answer the dude's question instead of posting useless garbage. thanks for wasting everyone's time.
The only way I know of fixing this right now is unfortunately by doing a clean install. Thats not to say however that you won't run into the same problem down the road. To be honest, even tho Templeton's answer was useless, he's right. Seven is currently way more stable.

[Forum FAQ]How to customize Windows 7 & Windows 8.1 dual boot menu

Scenario 1:
When you install Windows 8.1 on Windows 7 based computer, the default boot option is Windows 8.1 boot options menu which is shown as Figure 1:
If you want to use the old Windows 7 boot menu, follow these steps:
Start the computer and then go into
Windows 8.1 boot options menu which is shown as Figure 1.
Click
Change defaults or choose other options, and Options menu appears which is shown as Figure 2.
Click
Choose a default operation system option.
Click
Windows 7 Enterprise option to set Windows 7 as the default operating system in the Choose a default operating system menu which is shown as Figure 3.
Restart, and it will be changed to
Windows 7 boot options menu which is as shown as Figure
Scenario 2:
If you have Windows 7 and Windows 8.1 dual-boot configuration, and the default boot menu is Windows 7 boot options menu which is shown as Figure 4.
If you want to get the GUI as Windows 8.1 style, follow these steps:
Boot into Windows 8.1 computer, open the
command Prompt (Admin).
Type the following command
bcdboot c:\Windows and press Enter.
Restart, and you'll see the Windows 8.1 boot options menu which is as shown Figure 1.
Scenario 3:
When you have dual-boot system, one of the system disappear from the boot menu. We could follow these steps to get it back:
Boot the computer from the installation media (Here my example is Windows 7) that works fine system.
Go into
System Recovery Options menu, which is as shown as Figure 6.
Click
Command Prompt link to open the command prompt window
Use the
diskpart and list volume commands to confirm the OS boot drive, the commands are shown as Figure 7.
Backup the bcd file, rename it.
Rebuild a new bcd file. It will scan all disk to confirm all Windows installation on your computer and ask if you want to add them to boot list.
Type
Y to agree with adding to boot list. In next boot, you will get all boot options back in the boot menu.
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Since you've selected as default OS as Windows 8.1 you can go to disk management console and format the drive as required.
You can remove the Win 7 entry from boot loader:
To launch msconfig:
Click Start
In the Search text box, type msconfig
Launch msconfig by selecting it from the search results above the search text box.
After msconfig is launched:
Go to the Boot tab
Slect the boot entry you want to delete.
Click the Delete button and then click OK.
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

Windows Update on Windows 7 (x64) on boot camp fails

Running Windows 7 x64 on Boot Camp and trying to install an "important" update from windows update, but it fails:
Update for Windows 7 for x64-based Systems (KB2506014) - Published: 4/12/2011.
I received error code 80073712 and ran System Update Readiness Tool to no avail. Microsoft recommends repairing Windows from the install disc if using that tool fails, but I'm not willing to go that far just yet.
KB 2506014 title is "Update for the Windows Operating System Loader", so I am wondering if there is something about how Boot Camp is configured that is preventing this from installing.
Has anyone else running Windows 7 x64 on Boot Camp received the same error for this particular update, or been successful in installing it? It is thus far the only windows update that has failed to install for me.

KB 2506014 2011-04-13 (important) http://support.microsoft.com/kb/2506014
Reason description -
http://www.microsoft.com/technet/security/advisory/2506014.mspx
Re-download?
http://www.microsoft.com/downloads/en/details.aspx?FamilyId=348f56f3-eb07-42f4-9 dd2-eadc7251fe34&displaylang=en
Try Search, pasting data from between {} {"windows 7"+KB2506014+fails} into search argument. This shows problems with Norton etc.
You could download "Autoruns" to see drivers etc. that are loaded - good coding 606K - from Sysinternals - Mark Russinovich and Bryce Cogswell. http://technet.microsoft.com/en-us/sysinternals/bb545021
Good for Windows 7, this allows disable of questionable/unwanted drivers
I uninstall bootcamp wireless etc. drivers such as broadcom, bluetooth that I do not use on Mac Pro.
There are some utilities not compatible with Windows 7 which you do not want to use.

How can I force mount a dvd that isn't even seen by Disk Utility? I can see it on the Mac when using my Windows 7 partition via Boot Camp, but not in Lion, which is how I would rather be running.

How can I force mount a dvd that isn't even seen by Disk Utility? I can see it on the Mac when using my Windows 7 partition via Boot Camp, but not in Lion, which is how I would rather be running.

Well if there is a EFI block, then running a program in OS X isn't going to do a lick of good.
After all EFI was designed for Trusted Computing and Digital Rights Management, to act between the OS and hardware, can read drives, contact the Internet and everything.
Windows doesn't use EFI, will have UEFI in Windows 8 though.

Windows Defender Alert on Boot

Similar Messages

Maybe you are looking for