Windows Deployment Service Failed to Start

Hi,
I am trying to test the deplyment of Windows Vista RC1 using Windows Deployment Services (WDS). I have Installed WDS using WAIK on Windows Server 2003 Sp1. Installation completed Successfully, however i am not able to start the service of WDS. Following errors are logged in event logs:
Event ID: 257 Source: WDSServer
Description: An error occurred while trying to start the Windows Deployment Services server. Error Information: 0x54B
Event ID: 513 Source: WDSServer
Description: An error occurred while trying to initialize provider BINLSVC from C:\WINDOWS\system32\binlsvc.dll. Windows Deployment Services server will be shutdown.Error Information: 0x54B
Any help would be greatly appreciated.
Thanks in advance....
Vineet Arora

I am having a similar issue with WDS. Here is how my server is configured:
1. The server was initially a RIS Server, it was confiured with Windows Server 2003 SP1.
2. RIS was then removed, and Server 2003 SP2 was installed.
3. I then installed WDS (Obviously native mode now)
4. Configured the WDS Settings for PXE etc.
5. The WDS Server Service however just refuses to start, these are the messages in the Event viewer:
Application:
Source:WDSServer
Category: WDSServer
Type: Error
Event ID:257
An error occurred while trying to start the Windows Deployment Services server.
Error Information: 0x32
System:
Source: Service Control Manager
Category: None
Type: Error
Event ID:7024
The Windows Deployment Services (WDS) Server service terminated with service-specific error 50 (0x32).
Any ideas?
Laila*

Similar Messages

Windows Deployment Services will not start

After advertising a image to my remote client computer I receive this error:
PXE-T01: the specified file was not found
PXE-E3B: TFTP error - file not found
PXE-M0F: Exiting Broadcom PXE ROM
I logged into the server and noticed the "windows deployment service" is not running. I tried to start the service and it failed to start. I then checked the "Site System Status" log and noticed there was a "Critical" message for the PXE service point role,
and a "warning" message for the management point role.
On 8/16/10 for the PXE service point role I see this critical error: PXE Control Manager detected PXE service point is not responding to pxe requests. The error is 16389. Possible cause: pxe service point is not started or not responding.
I would greatly appreciate any assistance.
Thank you

Thank you everyone for your patience and assistance. I have resolved the issue after double, and tripple checking everything. The problem was that the boot images (x64, and x86) were not pointed to SMSPXEIMAGES$ distribution which is the server share. I
pointed it to the Server only. After pointing to both the share, and the server all works fine.
So the initial issue with the deployment service not starting was to uninstall WDS, and the PXE option in SCCM. During the troubleshooting I accidently deleted the SMSPXEIMAGES$ distribution point from the boot image which caused another issue after resolving
the windows deployment problem.
Hope this helps the next person that has this issue.
The solution exists already in the link that I gave you, see the point N°5 :)
http://blogs.technet.com/b/smsandmom/archive/2008/09/17/configmgr-2007-troubleshooting-pxe-service-point-issues-and-wds-service-not-starting.aspx

Windows Search Service fails to start in Win8.1 Pro

When I attempt to start the Windows Search service I am getting the following error:
"Windows could not start the Windows Search service on Local Computer.
Error 2: The system cannot find the file specified."
Looking at the details of the service, it appears the file in question is C:\Windows\System32\SearchIndexer.exe with the /Embedding parameter. When I look in the System32 folder, the file is clearly present with a date stamp of 08/22/2013 and a time
stamp of 04:07 (I have 24 hr clock enabled in Settings).
So I'm unsure what the problem is.
Have attempted to run the SFC tool, no problems found. Have disabled the service, restarted Windows then attempted to restart the service, getting the same error.
Have attempted to restore to a previous point and still getting the same error. Even restoring to a date same as initial installation results in the same error. Any thoughts on what I can do at this point, short of doing a fresh install?
Thanks!

Thank you!!! Have been looking for solution for months... even considered about reseting windows!
This solution worked for me:
Rename:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows Search\FileChangeClientConfigs
to
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows Search\FileChangeClientConfigsBAK

Make WDS Service account approve pending devices in WINDOWS DEPLOYMENT SERVICES

Hi Technet and all other people reading this.
I am at the moment trying to get a Service account(WDSService) to approve pending devices in Windoes Deployment Services on a WDS server.
I have created a domain called LALALA.dk on a server(DNS is included in the domain), and installed windows deployment services on another server. The Deployment service is setup to prestage devices, and therefore devices needs to be approved before it can
be deployed.
My problem is that at the moment, we are using Domain Admin accounts to do the approving and i wish to change that to a service account, made specially for this job which ofc. should have minimum right. Because i have a very hard time understanding
why i NEED to grant domain admin rights or local admin rights to a person just so that he can approve pending devices. There has to be a way to use a service account to do the job.
I have done some research and found out that local admin, domain admins and enterprise admins are the only onces that have the permission to approve pending devices, and that a problem for me, when i want a service account to do it for me(Not automatically)
but a service account that can name and approve devices manually.
Here is what i have allready tried.
1. making WDSService run the Windows Deployment Services (service), but this didnt work because it lacks the permissions needed.
2. I have given the read+write permissions on the remoteinstall folder, even tried with full control.
3. Delegate control on the OU in active directory, to create computer object, with full write permissions. I also tried with full control. I added both WDSServer$ and the service account(WDSService) on the OU. Still nothing.
4. I then downloaded subinacl tool, and granted WDSService account permission to start, stop the service, even tried with full control on the Windows Deployment Service(WDSServer as server_name). I get error 1297 something with priviledge missing from the
service account to perform the actions. So still nothing. Which is really weird when i ran a command i cant remember now, where i could see that the service account had full permission granted to the service, and still was'nt able to start the service.
5. I then tried to create a script using WDSUTIL, but was not able to grant the service account permissions to perform the action of approving pending devices. And i dont want to use a script everytime i need to approve a device.
6. Since the local system account is running the Windows Deployment Service , my thought was to join the WDSService account to the built-in NT AUTHORITY/local system or NT AUTHORITY/local service, this seems impossible from what i experienced, unless you
are super powershell geek i quess you can, so this option didnt get me anywhere as well.
6. I then created a gpo granting wdsservice account the "log on as a service" policy on the Windows deployment service Server, still nothing works as attended. I still get error 1297.
7.I tried copying the registry keys (WDSSERVER) from the HKEY_LOCAL_MACHINE hive on the WDS Server, and imported it into my Domain's registry, but could'nt find the service i wanted to grant permissions to in the group policy settings (computer configuration/policies/windows
settings/security settings/System Services) I then created a registry entry with group policy (computer configuration/policies/windows settings/security settings/registry) to point to (local machine/system/controlset001/services/WDSServer) and granting
WDSService account full control and deployed the policy to the Deployment server. Nothing happend and i still cant approve pending devices with my service account.
from my understanding service account where created to maintain small certain tasks or actions with limited permissions, so if comprimised they could only do very little damage, and so that this account can be setup to perform the tasks without any administation
of the account. So my question is, is it even possible to achieve what i want = granting a service account the permission to perform the action of approving pending devices on a Windows Deployment Server, and if so how ?
I am so confused over this and I am really reaching the limits of my understanding of this.
Help is very much appreciated.
Henrik Larsen

Hi ZeR1X,
The Require Administrator approval is for unknown computers.
The similar thread:
WDS - Request administrator approval not working
https://social.technet.microsoft.com/Forums/windowsserver/en-US/b9088be7-7afe-4e2b-b5fb-4554a92c4a2a/wds-request-administrator-approval-not-working
More information:
Windows Deployment Service fails to start with error information of 0x5
http://support.microsoft.com/kb/2009647
WDS 3.01 Troubleshooting Guide
http://technet.microsoft.com/en-us/library/cc754828(v=ws.10).aspx
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Windows Vista firewall fails to start. Error 1068 The dependancy service or group failed to start

I have looked at the previous blog relating to this but the remedy hasn't worked
When trying to start the firewall all I get is security center can't turn on windows fire wall
I have gone into services and tried to switch on the firewall and get error 1068 the dependancy serice or grop failed to start
I followed the previous blog,
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\BFE\Parameters\Policy
Right click the Policy key and choose
Permissions. ClickAdd and Enter
NT Service\BFE
Then click Check Names (the name will change to just bfe) and thenOk.
Click Full Control then Ok your way out.
Click Start - All Programs - Accessories - Right click Command Prompt and chooseRun As Administrator. Type (or copy the below lines and one blank line underneath and right click in the command prompt window and choose Paste).
sc start bfe
sc start MpsSvc
However i get the message
Start service failed error 1068
CAN ANYBODY HELP ME WITH WHAT TO DO?

1)Do u have a third party security software installed?
This could be due to that... What are the different virus scans you are already having.. there may be third party firewall or security product
which is interfering the windows firewall.. disable one by one your security scanners and try to up the windows firewall
(2)if you dont have such firewall product installed, this could be due to malware or some other problem...
if you have an antivirus solution, update it's definitions, and do a full system scan..
If you dont have a antivirus solution or your one is not working, use one of the recommended tools (use only one of
them at a time)
http://www.microsoft.com/security/scanner/en-us/default.aspx
And/Or
http://www.malwarebytes.org/products/malwarebytes_pro/
And/Or
http://www.simplysup.com/tremover/download.html (shareware
and can be activated for 30 days free)
And/Or
http://www.surfright.nl/en (shareware and can be activated for 30 days free)
And/Or
http://www.kaspersky.com/free-virus-removal-tool
if it is also not the problem, may be your firewall service is damaged..
(3) Open a command prompt run as administrator and type
sfc/scannow
(4)Try to repair the firewall service
Run the services repair tool by ESET
http://kb.eset.com/library/ESET/KB%20Team%20Only/Malware/ServicesRepair.exe
And/OR
Diagnose and fix Windows Firewall service problems automaticallyhttp://support.microsoft.com/mats/windows_firewall_diagnostic/en-us
(5)And/OR
Download and add this Windows firewall registry entry- https://www.dropbox.com/s/rdvziqlg4epaw9e/mpssvc.reg
(If you find any difficulty in adding this to registry refer this http://www.windowstechinfo.com/2013/07/solved-cannot-import-to-registry-not.html
http://blogs.technet.com/b/networking/archive/2011/06/14/the-windows-firewall-service-fails-to-start-registry-permissions.aspx
And/OR
open a command prompt using run as administrator
and copy paste these
Rundll32 setupapi,InstallHinfSection Ndi-Steelhead 132 %windir%\inf\netrass.inf
and hit enter
(6)command prompt (run as admin), type
netsh advfirewall reset
and then press "Enter."

Windows Deployment Services Unable to PXE boot clients PXE-E53: No Boot Filename Received

Hi
I'm trying to configure WDS/MDT to deploy Windows 8.1. I've captured an image and I'm ready to deploy the image to a workstation, as per the above title when I attempt to PXE boot a test workstation it just times out with the following error message PXE-E52:No
Boot Filename Recieved. I've tried a few tweaks to get it working however no such luck.
The setup is as follows it's a virtual Windows 2012 R2 machine, just a fresh member server with microsoft deployment toolkit installed and WDS role installed with the nesscary framework features installed.
I've tried tweaking the properties of most of the settings within the server settings in WDS with no such luck.
I'm a novice at WDS but from what I've read I shouldn't need configure that much in the first place to get it working.
I'm willing to bet it will be something I've overlooked so I need a 2nd opinon, could anyone provide any troubleshooting tips. If you require anymore information please let me know.
Cheers

Hi Joel,
This error may caused by the WDS server is not pushing the images because PXE Clients are not able to download or communicate with the TFTP server.
The image can’t be download generally caused by the the Vlan is not enabled IP helper/DHCP relay agent configured on it, all DHCP broadcasts on UDP port 67 by client computers
should be forwarded directly to both the DHCP server and the Windows Deployment Services PXE server.
The related KB:
PXE clients computers do not start when you configure the Dynamic Host Configuration Protocol server to use options 60, 66, 67
http://support.microsoft.com/kb/259670
The similar thread:
PXE-E53: No boot filename received
http://social.technet.microsoft.com/Forums/systemcenter/en-US/8de3bd6a-f8ec-41d9-ae0f-5b2fdb9e5831/pxee53-no-boot-filename-recieved?forum=configmgrosd
WDSServer (Windows Deployment Server) Fails to Start
http://social.microsoft.com/Forums/en-US/d96b0b86-f2b0-49a5-8946-19ab515f23e6/wdsserver-windows-deployment-server-fails-to-start?forum=windowshpcitpros
I’m glad to be of help to you!
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Can't start "Windows Deployment Services" Service

I have a Windows 2003 Server that has WDS SP1 installed. The Windows
Deployment Services Server Service isn't started and when I try to
start it I get a message that says:
Windows could not start the Widows Deployment Services Server on Local
Computer. For more information, review the System Event Log. If this
is a non-Microsoft service, contact the service vendor, and refer to
server-specific error code 2310.
Event viewer lists Event ID 257 and this:
An error occurred while trying to start the Windows Deployment Services
server.
Error Information: 0x906
When I go to the actual WDS application, my server isn't listed. If
I try and add it, I get a message that says "The Windows Deployment
Services configuration is corrupt. Would you like to add it anyway?"
If I say yes, the server is added, but it has a red x through it.
I thought about removing WDS and then re-installing it, but it listed a
number of programs that might fail if I did that.
What should I do?

Thanks, my problem was exactly that:
..................The error you are receiving generally indicates that you have a networking configuration problem on your server that
is causing the domain to be unreachable...............
They exchanged the Firewall and forgot to unlock the doors. After review and release back to work.
Thank you.________________
Moura

WDS Server Service won't start - 'An error occurred trying to start the Windows Deployment Services Server.'

I'm having issues installing starting the WDS server service on Win 2008 R2, this is happening on multiple (all 2008 R2) systems on this domain so I'm beginning to think it's either AD or network related, in event viewer I get the following error.
'An error occurred trying to start the Windows Deployment Services Server.'
Error Information: 0x0906
EventID : 257
single domain, single forest, 2008 R2 functional level, both system are virtual plugged into same vswitch on a flat network.
any ideas what might be the issue? I've never had an issue getting this working on many occasions before today and I've come to many a dead end looking at other articles thus far...
With WDS tracing enabled I get the following error information:
[4304] 09:22:11: ===>Starting logging of module [WDSServer]
[4304] 09:22:11: [UDPPorts] Policy: 1, Dynamic Port Range: 64001-65000.
[4304] 09:22:11: [RPC] Using Tcp Port 5040 for Rpc Calls.
[4304] 09:22:11: [RPC] Client Impersonation Logging=Disabled
[4304] 09:22:11: [RPC] Host Name: sccm.domain.local
[4304] 09:22:11: [RPC] NTLM/Kerberos Spn: ldap/sccm.domain.local
[4304] 09:22:11: [RPC] Initialized
[3756] 09:22:11: [RPC] Server Started.
[4304] 09:22:11: [BINLSVC][RPC][Ep={5F4FB9F0-C0E3-41C1-AA00-9A7C690AC3A3}] Registered
[4304] 09:22:11: [BINLSVC] Provider Initialized.
[4304] 09:22:11: [WDSDDPS][RPC][Ep={FA0A27E1-C2BA-4B3B-94B2-025E82FFAA6D}] Registered
[4304] 09:22:11: [WDSDDPS][RPC][Ep={011D24AC-CB3A-4739-A339-5D2E1B5306CE}] Registered
[4304] 09:22:11: [51][WDSDDPS] [d:\w7rtm\base\ntsetup\opktools\wds\ddp\server\ddpprovider.cpp:196] Expression: , Win32 Error=0x906
[4304] 09:22:11: [WDSDDPS][RPC][Ep={FA0A27E1-C2BA-4B3B-94B2-025E82FFAA6D}] Closed
[4304] 09:22:11: [WDSDDPS][RPC][Ep={011D24AC-CB3A-4739-A339-5D2E1B5306CE}] Closed
[4304] 09:22:11: [d:\w7rtm\base\ntsetup\opktools\wds\wdssrv\server\src\wdsprovider.cpp:144] Expression: , Win32 Error=0x906
[4304] 09:22:11: [WDSDDPS] Initialization Failed (rc=2310)
[4304] 09:22:11: [d:\w7rtm\base\ntsetup\opktools\wds\wdssrv\server\src\wdsprovhdl.cpp:172] Expression: , Win32 Error=0x906
[4304] 09:22:11: [WDSDDPS] Deleted.
[4304] 09:22:11: [d:\w7rtm\base\ntsetup\opktools\wds\wdssrv\server\src\wdsservice.cpp:178] Expression: , Win32 Error=0x906
[4304] 09:22:11: [Udp] Listen Shutdown.
[3756] 09:22:11: [RPC] Server terminated (rc=0)
[4304] 09:22:11: [RPC] Listen Stopped.
[4304] 09:22:11: [BINLSVC] Shutting down
[4304] 09:22:11: [BINLSVC][RPC][Ep={5F4FB9F0-C0E3-41C1-AA00-9A7C690AC3A3}] Closed
[4304] 09:22:11: [BINLSVC] Deleted.

It seems I've found out the solution myself, the issue seems to be caused when DHCP and WDS are on the same server, The installation must identify this during the first installation of WDS but not on subsequent installations, the method to
get it working again is:
1.
Install WDS Role (using defaults)
2.
Make the following registry change:
HKLM\SYSTEM\CurrentControlSet\services\WDSServer\Providers\WDSPXE\UseDhcpPorts = 0
3.
Run the following command line to initialize Windows Deployment Services:
wdsutil /initialize-server /reminst:D:\RemoteInstall
4.
Run the following command to enable the DHCP port registry setting
wdsutil /Set-Server /UseDHCPPorts:No /DHCPOption60:Yes

An error occurred while trying to start the Windows Deployment Services server

After rebooting the server, I cannot start the Windows Deployment Services anymore.
It worked perfectly before the reboot. When starting it manually these errors appear in the event log:
The Windows Deployment Services Server service terminated with service-specific error 1460 (0x5B4).
An error occurred while trying to initialize multicast manager. Windows Deployment Services server will be shutdown.
Error Information: 0x5B4
An error occurred while trying to start the Windows Deployment Services server.
Error Information: 0x5B4
This is on server standard beta 3.

I have removed the server from the WDS, then I have uninstalled the role, rebooted, reinstalled the role.
When I started the WDS the server was back in there, but when I wanted to start the service I got the message "the windows deployment services configuration is corrupt". I have triggered these commands to reset this:
Code Snippet
wdsutil /Verbose /Progress /Uninitialize-Server
Windows Deployment Services Management Utility [Version 6.0.6001.16510]
Copyright (C) Microsoft Corporation. All rights reserved.
Tearing down server...
== Original server operational mode: Native ==
-> Resetting setup state
-> Disabling and resetting Windows Deployment Services services
-> Removing server BINL SCP
-> Removing Windows Deployment Services share at \\LH-AJGG6OZWH9Z4.longhorn.offi
ce\REMINST
== Final server operational mode: Not Configured ==
The command completed successfully.
Then i did this command, but again it failed to start at the end.
Code Snippet
C:\Windows\system32>wdsutil /Verbose /Progress /Initialize-Server /REMINST:"c:\R
emoteInstall"
Windows Deployment Services Management Utility [Version 6.0.6001.16510]
Copyright (C) Microsoft Corporation. All rights reserved.
Setting up server...
-> Creating Windows Deployment Services installation tree
---> Creating Windows Deployment Services installation root at \\LH-AJGG6OZWH9Z4
.longhorn.office\c$\RemoteInstall
---> Creating Windows Deployment Services share at \\LH-AJGG6OZWH9Z4.longhorn.of
fice\REMINST
---> Creating Windows Deployment Services folder \\LH-AJGG6OZWH9Z4.longhorn.offi
ce\REMINST\Images
---> Creating Windows Deployment Services folder \\LH-AJGG6OZWH9Z4.longhorn.offi
ce\REMINST\Boot
---> Creating Windows Deployment Services folder \\LH-AJGG6OZWH9Z4.longhorn.offi
ce\REMINST\Boot\x86\Images
---> Creating Windows Deployment Services folder \\LH-AJGG6OZWH9Z4.longhorn.offi
ce\REMINST\Boot\ia64\Images
---> Creating Windows Deployment Services folder \\LH-AJGG6OZWH9Z4.longhorn.offi
ce\REMINST\Boot\x64\Images
---> Creating Windows Deployment Services folder \\LH-AJGG6OZWH9Z4.longhorn.offi
ce\REMINST\Boot\Fonts
---> Creating Windows Deployment Services folder \\LH-AJGG6OZWH9Z4.longhorn.offi
ce\REMINST\Tmp
---> Creating Windows Deployment Services folder \\LH-AJGG6OZWH9Z4.longhorn.offi
ce\REMINST\Mgmt
---> Creating Windows Deployment Services folder \\LH-AJGG6OZWH9Z4.longhorn.offi
ce\REMINST\WdsClientUnattend
---> Creating Windows Deployment Services folder \\LH-AJGG6OZWH9Z4.longhorn.offi
ce\REMINST\Templates
-> Installing Windows Deployment Services files
---> Installing system files
---> Installing boot files for x86
---> Installing boot files for ia64
---> Installing boot files for x64
-> Updating registry
-> Configuring the TFTPD service
-> Configuring BINL SCP
Enabling Windows Deployment Services services...
Starting Windows Deployment Services services...
An error occurred while trying to execute the command.
Error Code: 0x41D
Error Description: The service did not respond to the start or control request in a timely fashion.
Anyone have an idea what could be the cause? I found this additional error in the event log, but distributed file system hasn't been installed since the beginning.
DFS could not access its private data from the Active Directory. Please manually check network connectivity, security access, and/or consistency of DFS information in the Active Directory. This error occurred on root REMINST.

Trying to install the latest iTunes on my Gateway w/ Windows XP. I keep getting the message "Service 'Bonjour Service' (Bonjour Service) failed to start. Verify that you have sufficient privileges to start system services."

Hi, I'm trying to re-install the latest iTunes on my Gateway w/ Windows XP. I had to update it a while back to put songs on my brother's iPod, but my computer froze halfway through and nothing has worked right since.
I keep getting the message "Service 'Bonjour Service' (Bonjour Service) failed to start. Verify that you have sufficient privileges to start system services."
I looked through older discussions that told me to go to right click My Computer - Manage - Services and Applications - Services - Find Bonjour and restart it.
Well, the only option that I can click on is Start. When I do, it says "Windows could not restart the Bonjour Service service on Local Computer. Error 2: The system cannot find the file specified."
Where do I go from here? Help would be greatly appreciated, I've been trying to fix this for over a year now with no dice. Also, I cannot do a factory reset (last effort) because it says the administor's account is disabled and I do not have the disc.

Sorry if double posting is a no-no here, but I forgot to add that I've already tried disabling Spyware Doctor.

Apple Mobile Device Service failed to start which eventually leads to windows error 193 which never goes away no matter what I do and the dreaded

Mid way through download of I-Tunes after clearing every Apple program from my computer I get "Apple Mobile Device Service" failed to start message. Eventually leading to Windows error 193 (error 7). How do I get Apple Mobile Device Service to start so I do not get error messages and failure of I-Tunes to install?

If you have a 64-bit machine, then try the "for older video cards" version...
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2

Windows could not start the windows deployment services server Error 1067: The Process terminated unexpectedly - Please help

Hello All
I am trying to set up a PXE service point on my DP in SCCM 2012 R2
1) I have enabled the role on the DP
2) rebooted and verified WDS installed as a role.( I let SCCM enable this role as instructed)
3) When I tried to start the role from services I get the error below:
Note: I also followed the troubleshooting steps in this technet article but still it stops at the half way point
http://support.microsoft.com/kb/2009647/en-us
Phil Balderos

Hi,
Here is a similar post for your reference.
Windows Deployment Service
http://www.windows-noob.com/forums/index.php?/topic/3938-windows-deployment-service/
Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Help!!! iTunes install error "Apple Mobile Device Service Failed To Start". Error 7 (Windows Error 193)

Help! Following a standard upgrade I got the error message "iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows Error 193).
I am running Windows 7 and installing again brings the message "Apple Mobile Device Service failed to start. Verify that you have sufficient privileges to start system services"
I have uninstalled everything Apple, deleted all related folders and run as administrator numerous times with no luck.
I had hoped that iTunes 12.1.2 would resolve the issue, unfortunately it failed to do so leaving me iTunes free which is driving me mad!
Can anyone advise what else I can do to resolve the error and bring back iTunes?
Thanks

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version, or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2

Windows 8 Hyper-V - Virtual Machine Management Service failed to start the virtual machine

I have Hyper-v running on Dell Precision T3600 with Windows 8 OS. I am trying to start a VM (called Windows8VM) to install Windows 8 in the hyper-v virtual machine, but I keep getting the following message:
"Windows8VM" failed to start.
Failed to start the virtual machine "Windows8VM" because one of the Hyper-V components is not running.
"Windows8VM" failed to start. (Virtual machine ID D670D3BB-9AE2-0453D-9191-EA6EFC242A9C)
The Virtual Machine Management Services failed to start the virtual machine "Windows8VM" because one of the Hyper-V components is not running.
I have turned the hyper-v feature on in the "Turn Windows feature on or off. The BIOS has virtualization enable. Help!!! driving me nuts for a week now.
Nick :(

Okay, I turned off hyper-v, went to bios and enabled Intel TXT(LT-SX) Configuration. Made sure that both Virtualization and VT for Direct I/0 are on. Next, I turned on Hyper-V and I create a brand new Virtual Machine call Windows8 and had
the DVD point to Windows8 ISO file on hard drive. When I clicked on start, it stayed in the Starting status mode for about 5 minutes. Then of course it failed. I looked at the Hyper-V-VMMS log and here is what it output:
Log Name: Microsoft-Windows-Hyper-V-VMMS/Admin
1) Error: The virtualization infrastructure driver (VID) is not running.
2) Info: Found a certificate for server authentication. Remote access to virtual machines is now possible.
3) Info: Successfully started the Virtual Machine migration connection manager.
4) Info: Virtual Machine Management service is started successfully.
5) Info: The WMI provider 'VmmsWmiInstanceAndMethodProvider' has started.
6) Info: The WMI provider 'VmmsWmiEventProvider' has started.
7) Info: The WMI provider 'VmmsWmiInstanceAndMethodProvider' has started.
8) Info: The WMI provider 'VmmsWmiEventProvider' has started.
9) Info: The Integration Services Setup Disk image was successfully updated.
10) Error: The virtual machine bus is not running.
11) Error: 'Virtual Machine Bus' driver required by the Virtual Machine Management service is not installed or is disabled. Check your settings or try reinstalling the Hyper-V role.
12) Error: 'Storage Virtualization Service Provider' driver required by the Virtual Machine Management service is not installed or is disabled. Check your settings or try reinstalling the Hyper-V role.
13) Error: The Virtual Machine Management Service failed to start the virtual machine 'Window8' because one of the Hyper-V components is not running (Virtual machine ID 2B393AF4-7B7E-4243-805B-23C09D20F4FB).
14) Error: 'Window8' failed to start. (Virtual machine ID 2B393AF4-7B7E-4243-805B-23C09D20F4FB)
Nick

When i try to download itunes on my windows computer it says apple mobile services failed to start and then i cant open itunes

I can not download itunes it says apple mobile services failed to start verify that you haves sufficient privileges to start system services help please

Hi mish11mish11,
Lets see if we can get that working again. If you are having issues with the Apple Mobile Device Service you may need to just restart the service. Check out the first article to walk you through that process. If you are still having issues, take a look at the second article to continue your troubleshooting.
How to restart the Apple Mobile Device Service (AMDS) on Windows
https://support.apple.com/en-us/HT203188
If you can't install or update iTunes for Windows
https://support.apple.com/en-us/HT201668
Take it easy,
-Norm G.

Windows Deployment Service Failed to Start

Similar Messages

Maybe you are looking for