Windows detects nano but iTunes does NOT detect even aftr doing all steps
my windows detects nano but iTunes does NOT detect even after doing all the steps described in the site. Any help ??? please ....
I did all the steps described in the article in Apple site at iPod appears in Windows Explorer but does not appear in iTunes http://docs.info.apple.com/article.html?artnum=93716
Similar Messages
-
My Ipod touch says i have to connect it to iTunes so i can restore it but it will not restore even after following the steps to fix the problem.
After pressing restore and after l5 minutes or so It comes up with the error 1611 and I followed all the steps but it still won't work.
-
ITunes updates not appearing, even after showing all updates
iTunes regularly sends me to the App Store when a new version is available, but the App Store shows nothing. I have selected "Show All Software Updates," I've managed hidden updates, and searched the App Store for iTunes. But iTunes still does not appear and I cannot update iTunes.
Click the "iTunes" link at the top of this page and download the installer.
-
HT1866 I installed iTune 10 on my windows XP. But iTune is not opening / running even no Error.
I have iPhone 4S. Want to download Application. How to?
'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards? -
I have a IMac 27" Core I7 Mid 2010 w/ Upgraded OS Mountain Lion 10.8.5 but I can't start it even after follows recommendations of the community. Please Advice
I am very desappointed with AppleImagine calling to your Doctor and saying "I'm unwell. Please advice (sic)"? What would he say? I think he'd start by asking a for a whole lot more information, wouldn't he? So, same here.
-
So I tried Installing iOS 8.3 onto my iPhone 6+, updated iTunes to the latest version, 12.1.2, downloaded the update for the phone, connected my phone - it detected fine like it always does. When I tried installing, it went to about halfway or so and then iTunes said there was a problem updating the phone.
The phone icon disappeared from iTunes and when I checked the phone it was giving the blank screen. I tried turning it off and on again... It showed the apple logo, and then the connect to itunes icon, but iTunes is not detecting it.
Even if I take it out and put it back in again, even with the hard reset holding the home and power buttons. I'm running Windows 8.1. So far I've tried the hard reset, cleaning the connector pins, switching to a a different USB port, reinstalling iTunes, checking to see if the Apple Mobile Device software is up to date, even using a previous restore point in windows.
The device makes a noise when it gets plugged in, indicating that it's being detected by the computer, but iTunes... nothing. And my phone is stuck on showing the connect to iTunes picture and it's bricked and unusable and I'm wondering why I even bothered with this stupid update.Most of the recent updates showed the connect to iTunes screen for a short time. But if the update was done with the iOS device connected to the computer running iTunes, the Connect to iTunes screen appeared only briefly then the update completed. If your iPhone didn't complete the update you will have to put the iPhone into Recovery Mode. Follow the steps very carefully in the link below. You might have to try several times to get your phone into Recovery Mode.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support -
I have forgotten my passcode for ipad and itunes is asking passcode to be entered - even after following directions for computers not synced... multiple times, but iTunes is not "detecting a device in recovery mode." What do I do now?
DFU Restore
This will very likley result in loss of data.
Plug the iPhone into the computer.
Ensure that it is running the latest version of iTunes and that it has access to the internet.
Press and hold both the home and sleep/wake buttons for exactly eight seconds.
Release only the sleep/wake button but continue to hold the home button for another five seconds.
Let go of the home button, then look at the computer screen for an instructional popup.
The popup should say "iTunes has detected a device in recovery mode. . .(etc)" Click accept to all boxes and let iTunes download and install all of the latest device Firmware and Software.
If no popup appears, repeat the above DFU instructions. If you've never done a DFU, it may take about three attempts to get the timing right. -
Hi,
I updated my iTunes to version 11.1.4.62, but it does not detect my iPhone 4s any more. I have tried the following ways but still did not work:
Rebooted the computer
Rebooted the iPhone
plugged and unplugged the USB cable multiple times and to various USB ports
Uninstalled and installed the i-Tunes
Signed out the iTunes and signed in again
my USB cable and ports are all ok
my ios version on iPhone is : 7.4.4
my laptop os is windows 8.1 and my processor is: Intel Core i7-3610QM @ 2.30 GHz
I appreciate your help.I find this on another post and tried it. It WORKED. I had to modify to fit my situation but give it a try. Good luck.
Go to Windows 8.1 Control Panel.
Go to Hardware and Sound; Devices and Printers; Device Manager; Portable Devices (look for Apple IPad)
Right-click, then select properties on the menu list.
Under the "Driver" tab menu, confirm the update driver button is not greyed out. If the update driver button is grey and unselectable, you need to select and click "Change Settings" button located near the lower left corner.
Now you can click the "Driver" tab menu near the top, so you can see the "Update Driver" button.
Select "Update Driver".
Select and click "Browse my computer for driver software".
For Windows 8.1 64 bit, it should be located in the folder: C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers.
Click Next, and let the driver re-install.
iTunes 11.1.4.62 should open automatically if your iphone is connected already. -
i just downloaded the latest version of itunes but i cant zync my iphone nor my ipod. it just to work perfectly with the older version of itunes but now itunes does not detect my ipod nor iphone. i have a windows pd and iwindows detects the iphone and ipod. what is something i can do to fix the problem??
See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Featurs appin the Window Control Panel. Then reinstall all the Apple software components
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests -
My iphone4s does not turn on,when I connect to power ,it shows the message "connect to itunes" but when I connect to iTunes,my pc does not detect my phone,so iTunes does not detect my iPhone.
Are you running the most recent version of iTunes for Windows on your PC? You may be running an older version that is incompatible with the 4s.
Hope this helps -
when I connect my iPod touch to your computer, itunes does not detect it ... but in My computer is detected as an external disk why?
See:
iOS: Device not recognized in iTunes for Windows
IOt is normal and expected for the iPod to appear in My Computer -
I recently updated my iTunes with the lates version but now it does not detect my iPhone 5 which it was working with the old version!!!
Hi, M_ghaderi.
Thank you for visiting Apple Support Communities.
If your device is not recognized by iTunes, I would recommend the steps in the article below. Start with the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver.
iPhone, iPad, or iPod touch not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
Jason H. -
my sony vaio laptop with windows 7 ultimate OS does not detect my iphone thru itunes 11.1.0.126. Any suggestions how to fix this?
windows 8 has been out long enough to have fixed this issue you would think Its bad enough my last computer hard drive went out and i lost all on it but now i cant backup my phone so if I lose it or something happens to it Ill be in bad shape lol PLEASE fix this issue!!! Too much info to store on Icloud but could be apples way of getting people to use the icloud and buy extra storage on icloud
-
ITunes V12.1.2.27 on Windows 8 does not detect iPhone 6 with IOS v8.3
Hello there,
It all began when I installed the latest IOS 8.3 and iTunes V12.1.2.27. iTunes simply does not detect my iPhone 6 any longer, but it does detect my old iPod mini. Everything used to be working just fine until the software update was done.
I've run thru all the steps on the Apple support page and spent over an hour on the phone with customer support. Checked the Apple mobile device driver, deinstalled iTunes, reinstalled iTunes, changed connecting cables etc etc. Nothing works!!
Help!
LESexact same issue. And I can be TOTALLY sure it is related to the update since I was at the birthday party of my little nephew taking photo and everything were just fine. Then my brother asked me if I had already updated my iPhone. I said no and then I updated it while I was still there. From the moment the phone ended the update, I ended taking photos... The update screwed the camera focus mechanism somehow. I'm trying to downgrade to 8.1.3 and see if it will be back to normal. In this case it is a software issue, otherwise it will be a hardware failure caused by the update. I'm dowloading 8.1.3 ipsw right now.
-
i just got an ipod touch but it will not sync to itunes. my itunes will not detect it. but my computer does. what do i do???
Start here:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
Maybe you are looking for
-
[SOLVED] Problem with murmur after upgrading to 1.2.3-4
I've been running Murmur on my server for a long time without problems. The last version I had running was 1.2.3-3. After upgrading to 1.2.3-4, the already-running murmurd process crashed after a while (some hours after the upgrade, after constant us
-
HT201182 Where can I get a replacement power supply for my 12 inch I book G4
G 4 power supply replacement
-
How do I get my security questions answers
I forgot my security questions
-
hi all i have just bought a antec smart power 350 watts power supply. its has a connector to connect to the motherboard (sfan connection), till now i cannot seem to be able to enable the sfan,i can see the spd of it or the temp its running. im using
-
Inserting current pathname and filename into Pages documents?????
Pages help explicitly says you can put "filenames" and "pathnames" into formatted text fields just as you can put in page numbers and the date. It does NOT tell you how to do this!!! What do I type so that my current pathname appears in pages? Or the