Windows device driver programs for third party pci i/o cards
hi
now i am working with i/o cards ,in our lab we are having our own designed i/o cards ,,so when we are inserting to the pci slots and turn on the system its asking some device driver .....?ok ,,now i want to access the i/o cards using labveiw. i want to install the device driver ,or other wise can i able to talk directly with the i/o cards ,
thanks in advance
Indrajit
| [email protected] | [email protected] .
Please continue this discussion here. Thanks!
Regards,
Anna M.
National Instruments
Similar Messages
-
Programming for third party DAQ
Hi all!!
i am using third party DAQ (HBM MGCplus ML01 amplifier).. i installed the instrument driver in my labview, wer i cud see my DAQ in Functions - Instrument I/O - Instr Drivers - mgcplus..
Now pls let me know how shud i configure the inputs and other settings when i interface the daq with labview, whereas with NI DAQ, we configure using measurement and automation explorer..
thanx in advance
Every Expert was once a Beginner!!I think that's a question you should be asking HBM.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines -
"Windows found driver software for your device but encountered an error installing"
I've spent hours researching this error - Seems like many people have the same issue although there is no difinitive fix or known cause.
I'm hoping someone here has an answer.
Windows 7 Home Premium x64 OEM (HP)
This is not an upgraded Vista system.
It's not a specific driver related issue as it's the same response/effect be it graphics/chip set/usb/printer drivers.
Please dont suggest to flatten and re-install or run a repair install - It's not an option, I only have remote access to the unit
as it's currently in field use.
This is a machine specific issue - identical machine purchased at the same time and configured the same has no issue.
So the story.
User has been fine for weeks - no hardware of software changes except Windows Updates.
A Camera/USB connection that was working no longer does.
Tried in all USB ports
Plug in - windows announces found new hardware, tries to install drivers then fails
with "Windows found software for your device but encountered an error installing ...."
Device manager finds and identifies device although it is in the 'Unknown Device" category.
Manually updating drivers via search/internet or point directly at a driver has exactly the same effect.
Thinking this was just the camera drivers - I researched and downloaded new drivers from camera manufacturers sites
Fuji and Canon.
Same effect.
Deleted/uninstalled drivers completely, deleted/uninstalled all USB root hub and USB devices (hidden and visible)
SFC /Scannow finds no error
Cold boot finds USB and chipset(?) devices on boot attempts to reinstall then we get
"Windows found driver software for your device but encountered an error installing"
So now I have no usb devices at all - memory stick/card reader/printer...... nada.
in fact if I try to update any device driver I get the same message generated.
Restore point does not help either.
After much trawling I found reference to a permisions issue and stale driver cache data.
(This is using an administrator account - not user with admin permissions?)
I'm willing to try anything at this time
I deleted the infcache.1 and other .dat files under c:\windows\system32\driverstore
Copied the usb .inf and .pnf from the appropriate FileRepository directory into c:\windows\inf
Uninstalled all the usb/unkown devices from device manager again.
Rebooted
Takes a little longer to boot as I take it it's rebuilding the driver cache then
a very short hurrah!!!
I can now use usb memory card and pen drives - no issue
Plug in a camera or printer...
"Windows found driver software for your device but encountered an error installing"
Several attempt at this trying different driver versions.
It should not be vendor specific, the other field machine that works is using Microsoft drivers for these devices.
I even copied the drivers from one machine to the other - repeated everything above...
"Windows found driver software for your device but encountered an error installing"
And then the nail in my sanity
Try windows update....
Reboot
"Windows found driver software for your device but encountered an error installing"
but this time its different.
The device it thinks it cannot install is the generic MTP-PTP drivers (Photo Transfer Protocol -so am I getting somewhere)
so it still finds but cannot install.
The cameras are always found but appear as 'unknown devices' and cannot be accessed
Uninstall all USB/unkown again - reboot..
Same message and this time I've lost all the USB again.
Restore point to before Win Update gets me USB back again although I still have no cameras - so theres an update issue as well.
This has to be tied down to a file access/ registry problem although I'm loath to go cutting about without some guidance.
I'm no great believer in 'registry cleaners' unless anyone can point to a definitive/no ad's/sales version that really works.
As I said above, flattening/rebuild at this time is not an option - the user is not best pleased and I'm completley stumped.
If anyone has experienced(manu of you have) and fixed(still to find one) this issue please let me know how as soon as possible.
ChrisI know I am replying to an old thread - but I have the answer and resolved this error, and since this message comes up first in search results, and part of my answer came from this thread, I wanted to help someone else as this took an extra
12 hours and a lot of technical insight to resolve. See below for detailed explanation that others ask for above.
My original issue was that iTunes didnt reinstall. generating this error that said I am trying to access an unavailable network resource and to browse to find itunes64setup (again). This may partly have been due to me deleting old install version folders.
Research led me to completely uninstall apple products and reinstall per their instruction and fixed the issue with iTunes. see
Remove and reinstall iTunes and related software components for Windows Vista, Windows 7, or Windows 8 - Apple Support
The SAME error I had while updating itunes recurred while uninstalling it from my Windows 7 SP1 system...so I went to microsoft Fixit and attempted to correct and it properly uninstalled iTunes for me, which allowed the reinstall.
What didnt work was my USB web root/ root hub, which partly involved my older system and USB 1.0, and the delete/reinstall existing drivers with the c:\windows\winsxs folder as source of drivers (thank you Magon Liu!!!) which I had to figure out what/why
and how.
Then I had an intel chipset issue...my new Iphone wasn't recognizing in plug and play, and there was an error with installing the device drivers for my new iphone 6. Manual applications didn't work, even though a generic device showed in control panel -
device manager with a yellow !
Per above blog answer - I tried to remove and reinstall my USB controller or update the drivers (I have an Alienware M15 laptop - a few years old.) I discovered that the USB host controller - an Intel(R) 5 Series / 3400 Series Chipset family USB Enhanced
Host controller - (port) was not covered by current Intel chipset programs which are Series 6 and later, but did have an update (8/20/2009 v9.1.1.1020) that supported USB 2.0 (and therefore 3.0 backwards compatibility which as an issue with my new iPhone
and some USB thumb drives.) To find this I had to look at the Support - Downloads and Drivers - browse for drivers and somewhere found an option to look for older no longer supported drivers. I found infinst_autol.exe for my case.
Once downloaded I tried to install and failed. Found the log in C:\Intel\Logs and contains:
[InstallDev]
[Device]
Driver = C:\Users\DAVIDS~1\AppData\Local\Temp\IPMx7\WIN7\ibexusb.inf
INF = C:\Users\DAVIDS~1\AppData\Local\Temp\IPMx7\WIN7\ibexusb.inf
Installed INF =
Previous driver package =
! Warning 0xE0000235: DriverPackageGetPath failed.
Difx = 64 bit
Execute command: C:\Users\DAVIDS~1\AppData\Local\Temp\IPMx7\x64\Difx64.exe -DriverInf "C:\Users\DAVIDS~1\AppData\Local\Temp\IPMx7\WIN7\ibexusb.inf" -Flags 20 -KeyPath "Software\Intel\Difx64"
Using RegDeleteKeyEx
!!! ERROR 0xE0000246: DriverPackageInstall generated an unexpected error
HERE'S THE ADDED EXPLANATION TO BRIAN'S POST THAT EXPLAINS THE SECURITY ISSUE:
This turned out to be an error for two reasons. First, after manually running the command in an "run as administrator" window (same error result), thinking it related to my anti-virus (turned that off/disabled firewall and A/V), and from this thread
granting my user administrative rights to files in an install folder and trying to reinstall inf files and drivers from C:\Windows\winsxs vs my copied infinst_autol.exe expansion (as found from log in C:\Users\David Samuels\AppData\Local\Temp\IPMx7\WIN7 folder).....that
there was an easier solution as the reason this error actually happens is a permissions problem.
To access the proper windows system folders - you have to be the TrustedInstaller service - not just in the administrator group...or you have to be the actual "Administrator" account. To become actual administrator on
your own laptop, Open a command window "run CMD.exe as administrator", then execute command
> net user administrator /active:yes
This creates a local PC Administrator account with no password. Coincidentally it has proper permissions to windows directories for installing drivers. Log in as this user, go to device manager and update the USB hub and any other drivers. if updating the
USB root - it doesn't replace it right away as the system cant disable the currently resident in memory "running" driver - you have to update, then restart the system, log in as administrator and repeat at the next lower layer that has issues.
Once completed - log in as yourself again and disable the administrator account in a command window with > net user administrator /active:no
This in my case enabled all my USB 2.0 and 3.0 devices on my originally only USB 1.0 laptop and everything else works properly again - I hope this helps many of you to resolve your own issues that were difficult to find and resolve and that got as far as
this thread. Good luck!
Regards,
Dave Samuels -
How to develop 64-bit Windows device driver for NI-6602?
Due to the fact that NI-VISA doesn’t support 64 bit Windows, how can I do to develop a 64 bit Windows device driver for NI 6602 (Counter/timer) PCI card. The possible jobs include:
Develop a Windows Kernel Mode Driver (“Device Driver”);
Make it to comply with VISA in order to utilize “osiBus Generic IO Interface” and MH DDK.
Could anyone please give me some advices as soon as possible?
William Liao
Message Edited by Wiliao on 07-22-2005 04:12 PMHi All,
I am currently working on getting the health parameters
from the motherboard like voltage fan and temperature. I have already
already done this using 32 bit winio driver but i am not able to work
on 64 bit version. is there any driver availbale in 64 bit for
obtaining this parametes or some one help me to get a 64 bit winio
driver.
Regards,
Senthil prabu R -
After several hours trying the troubleshooting options provided by the apple support site, I have come to what I think is the issue here. My girlfriend recently got an ipod shuffle and when plugging it into her computer the dialog pops up saying it is installing device driver software for the ipod. Eventually it asks me to insert the CD that came with the ipod. No CD came with the ipod, so I click the option that says "I do not have my cd". Then it gives me the option of searching automatically or manually for the driver software. The automatic way can't find it. Doing it manually, with the help of the troubleshooting page, didn't work either. google search can't seem to help me on this one. Also, I tried plugging the ipod into my computer (not hers) and it worked fine, it was able to install the device driver software on its own. Does anybody know the issue here? My computer has windows 7, and hers has vista. Hers is Serice Pack 1. When I tried installing service pack 2 it wouldnt work. I don't know if that is the issue though. I have tried just about everything, I think the issue is finding the device driver software. When I do a google search nothing comes up, so I have no idea what to do at this point. Any help would be appreciated, thanks.
Well its surprising to know that! But even have an ipod shuffle 3rd gen n dint face any problem like that. FYI no cd comes with the ipod jus take ur ipod to an apple exoert n he will solve ur problem .
-
Alarms for Third party devices on Cisco PI v 2.1
Is it possible to receive alarms for third party devices in Cisco Prime Infrastructure 2.1? If so how do i configure PI to show the alarms?
Hi,
AFAIk, It is not possible to receive alarms for third party devices in Cisco Prime Infrastructure 2.1.
we have very limited support of 3rd party devices in PI. third party devices only snmp polling, snmp traps and syslog will work
Third-party support
● Ability to discover and monitor third-party (non-Cisco) switches that support RFC 1213 and wireless controllers/access points from Aruba Networks
Thanks-
Afroz
****Ratings Encourages Contributors **** -
This is the messsage i get when trying to install nano 7th Generation........windows found driver software for your device but encountered as error whille attempting to install it .......what do i do help plzs.
How to restart the Apple Mobile Device Service (AMDS) on Windows
-
I am using I phone 5c after connected with my HP elite book 6930p laptop, (Installed Window 7 32 bit). automatic software driver is not deducting, and display Windows found driver software for your device (MTP USD Device) but encountered an error while attempting to install it.
I did install itunes and update also. but the above problem still same.
Kindly give me solution of it. awaiting.
Regards
Abbas Kadertry it with another computer to check if it shows up
if so
uninstall all apple software
reboot
use regedit to search and remove all itunes keys
reboot
resinstall apple software
if non of that helps then try another cable
if that don't help could be your phones connector is damaged -
I have Mac Pro 2007, which have no bluetooth hardware. What should I do to use Apple wireless keyboard and magic mouse??? Can 'third party's internal bluetooth card' be used for this purpose? Help me please...
You can find the Apple Bluetooth card on eBay for as little ten dollars (says its for the 2008 model Mac Pro, not sure about the 2007).
http://www.ebay.com/itm/Bluetooth-Board-iMac-and-Mac-Pro-922-8233-922-8233-/1208 49278570
Here is a link to a full explanation of the card and how to install it. Part numbers may differ a bit as that is an old article and newer models have come out.
http://www.xlr8yourmac.com/systems/Mac_Pro/Bluetooth_MacPro_install/Bluetooth_Ma cPro_install.html
Just make sure that the part will work in your model Mac Pro. To that end, you may be better off avoiding eBay and going to a parts reseller. There are even third party cards that use the internal Apple bluetooth slot.
http://fastmac.com/bluetooth.php
In theory, using a USB or PCI card will work at login so long as it is recognized by Apples drivers. You say you need to launch an application to use your current USB Bluetooth dongle? If it is not controlled by the Bluetooth icon in the menu bar then it must be using a third party driver of some sort. Unfortunately, I don't know off hand which USB and PCI cards are supported. -
Cannot close sales order for third party sales
Hello Gurus,
I cant seem to close a third party sales order even after it has been delivered and the incoming reciept match the sales order as well as purchase requisition or purchase order. at first I thought it was the difference in the unit of measure b/w the delivered products and the ordered products, but that is not the case because even when they are still the same and the quantities match I still have an issue and when I run VA05 (list of sales order) the sales order for the third party sales still shows up. An example is sales order XXX / PO XYZ/ Inv XYY u2013 ordered 45,000, shipped 39,980), we resolve it with the following steps below
1. change the PO quantity to match the invoice quantity
2. the requisition then re-opened itself automatically.
3. I then changed the requisition and marked it closed.
4. I then could go to the sales order and change the order quantity to match the billed and invoiced quantity. The rejection code 52 did not work u2013 I received a hard error: PO XYZ must be deleted before the line item could be rejected.
This is a whole lot of steps to perform just to correct 1 backorder. The reason that it had to be corrected is that the sales order mfg line stays on the Billing Due list and does not clear it self out unless you perform the steps above.
Also like I said even when all the quantities are the same I still have this issue so is ther any thing I can do to resolve this issue in configuration or otherwise and also we are using the satndard item category "TAS" for third party sales.
I will appreciate you contribution and help to resolve this matter
ThanksUnfortunately, all the steps need to be performed to close the status. I think even giving tolerances will not close the status. If it is a regular sale order, a small BDC program may be written to change the sale order quantity to match the invoice quantity. Since its a third party and there are too many documents which are involved in the process using ABAP programs is not a convenient option.
Regards,
GSL. -
Custom Template for Third Party Balance Summary Report(Java type executable
Hi Al,l we have a requirment to have a layout with some of the fields from
Third Party Balance Summary Report( Which is a Java type executable and
Data definition has Data Template attached(.xml)).
I tried in below way.
Coppied the Third Party Balance Summary Report program with same application and parameters
with. Then defined a Datadefinition with my concurrent prog short name
attached the same standard .xml file(Not sure what it is) and developed a custom template with
a custom rtf(excel output type), and submitted the program
the output is generated in excel but my custom .rtf layout is not getting applied
rather it is showing same layout as in standard.
Some thing I am missing here or else it is not the way of changing the
template.
If any one know how to do this please let me know.
My client want only some files from the standard report(no need of new fileds)
with output type xls.
Thanks in Advance.
The same content is posted in Custom Template for Third Party Balance Summary Report(Java type executable sorry for duplicating the thread, just for increase the visibility for my issue I did this.I gave up on using a different font or figuring out if I could use Times New Roman's built-in fractions visible in Font Book (as unicodes) and did a work-around based on Michael Wasley's tips in this discussion.
https://discussions.apple.com/message/11622842#11622842
I adapted it however and think it looks a little better.
Font: Times New Roman 12 point
I used the fraction bar in 12-point (Shift-Option-1) for automatic kerning.
For the numerator, I changed the font style to superior (12-point).
For the denominator, I changed the font style to subscript (Shift-Command-hyphen) and reduced the font size to half, or 6-point using the short-cut Shift-Command-<.
When the fractions occured in my footnotes (9-point), I used 4-point in the denominator; 10- and 11-point, I used 5-point in the denominator. This seemed to produce the best result when printing.
Thank you, Michael.
-Dottie -
Dump in smartform driver program for purchase order
i created one smartform with driver program for purchase order.
in smartfrom i gave
form interface: p_ebeln as import,
tables as it_ekpo like ekpo.
global definitions are
wa_ekko type ekko for printing the ekko data in one window,
wa_ekpo type ekpo .
in main window i took the one table and loop the ekpo table for printing the item details.
no errors is there.but ; when i call this generated function module to my driver program it goes to dump.
in driver program i declare structures,internal tables,work areas, and parameter as p_ebeln .
and also select statements for my table all are good.but its not work.
in function module i pass the details as export p_ebeln = p_ebeln and table it_ekpo = it_ekpo.
and also i done debugging in this data come to the internal table and work areas.
but it goes to dump.
if u dont mind plz solve my problem.
Thanks
Navya.
Moderator message: empty lines removed, subject corrected, please use meaningful subject lines when posting!
Edited by: Thomas Zloch on Mar 24, 2011 10:10 AMHi Navya,
Your smartform is correct. But, as per my understanding, the dump comes when you call the smartform from the driver program. If that is the case, please check the input parameters and all th parameters in the program should be same as used in samrtform. Any deviation would lead to a dump.
Analyse and resolve!!!
Regards
Atul Sachdeva -
How to know Delivery Note no. for Third Party sales
Hello Experts,
I am configuring Third party sales process.and got the suffcient help from old posts.But i got stuck in MIGO step.While doing MIGO we have to enter PO and Delivery Note No so where to find delivery note no.?
Another confusion is, In some of the posts in community,for third party sales configuratuion MIGO is one of the step while in other similar posts there is no MIGO step instead they have shown direct MIRO after PO creation so which i should follow ?
Thanks in advance
Regards,
VikalDo you really just follow what others have posted and do not double check with the SAP documentation and even more important with your business needs and some logical thoughts?
In all our >750 plants is a guy who receives the material that is coming in, he compares the paperwork with the goods and then enters the receipt in SAP.
This is the normal and logical process of a receipt in your warehouse.
And now compare this with a 3rd party sales, where the goods are shipped from your vendor directly to your customer.
The warehouse guy does not get any papers from a truck driver, he can't count any goods before he could do something in SAP, he does not even know about this order. And exact this situation is the basis for the standard design: no goods receipt, just invoice.
And any deviation is made because of some special requirements (legal and country specific, or just because of an almighty finance department which can't understand that some of their requirements do not make much sense in logistics. e.g. mandatory 3way matches PO - GR - IR which is not worth the name if you force warehouse people to make theoretical receipts which physically never happened and cannot be verified. -
User Exit for third party order processes.Missing in ECC 6.
Hi All,
There is a user exit EXIT_SAPLJ3AM_003 which exist in 4.6C version of SAP for AFS.
This user exit is for Third Party order processes. This is called within the include LJ3AMFD1 of the main program SAPLJ3AM.
But this User exit is missing in ECC version of SAP for AFS.
Could anyone please let me know how I can resolve this issue as I need this User exit for my requirement. Has SAP provided any enhancement spots for this?
I tried to search the enhancement spots and OSS notes but couldnu2019t get any useful information.
Please advice.
Thanks,
Ameeshachanged our requirement
-
is there a way of finding out if a given program is a driver program for scripts.
reply asap.
points will be rewarded.Hi..
You can find the link between the Form and the Print program in Table <b>TNAPR</b>.
<b>Fields</b>
FONAM -> FORMNAME
PGNAM -> PROGRAM NAME
The other way to find is Open the Text elements of any window
and Select the Menu path Sytax->check
<b>Reward if Helpful</b>
Maybe you are looking for
-
How to sign into the iTunes store without a credit card?
For the past little while I have been very frustrated with itunes. I don't have an apple device, but I want to start legitimately purchasing the music I listen to (I live in Canada, so downloading music is legal, but I'd still like to purchase music
-
Canon 50D RAW files not showing
Hi all, I just got a Canon 50D as an addition to the current 400D (Rebel in the USA). I am shooting 100% RAW files, and I am having a problem with previewing them. I downloaded and installed the Camera RAW 5.2 fro Adobe and Lightroom and Photoshop ha
-
How to find source of Virtual Infoprovider
Hi HANA Experts, Greetings of the day. I created a virtual infoprovider by using a HANA Calculation view. So far so good. Per say if some body looking at my Virtual Provider want to know what is the source of it. Is there way where i can find this in
-
Can someone explain the basic differences between the T3, T3i and T4i ?
Solved! Go to Solution.
-
I have try to create sharepoint 2010 Project in VisualStudio 2012. but give me error A Sharepoint server is not installed on this computer.A sharepoint server must be installed to work with sharepoint Project.