Windows Devices are Failing Log In
I have several Windows devices failing log in on my network (according to the spice UI).
However when I check the event log on the individual machines I am seeing successful logons immediately followed by logoffs (in the same second). The account I have set up on the machines is an Admin Level user account with the same User Name and PW across the network.
Spice UI is also confirming that I have ports 445 (micro_ds), 3389 (rdp), 135 (wmi), 139 (netbios_ssn) open on the machines.
Majority of the machines are running windows 7 Pro or Ultimate, a couple are on windows 8. I do have 4 windows 7 machines that are authenticating as expected.
Any help would be appreciated.
This topic first appeared in the Spiceworks Community
I have several Windows devices failing log in on my network (according to the spice UI).
However when I check the event log on the individual machines I am seeing successful logons immediately followed by logoffs (in the same second). The account I have set up on the machines is an Admin Level user account with the same User Name and PW across the network.
Spice UI is also confirming that I have ports 445 (micro_ds), 3389 (rdp), 135 (wmi), 139 (netbios_ssn) open on the machines.
Majority of the machines are running windows 7 Pro or Ultimate, a couple are on windows 8. I do have 4 windows 7 machines that are authenticating as expected.
Any help would be appreciated.
This topic first appeared in the Spiceworks Community
Similar Messages
-
ADB and FASTBOOT on Android devices are failed in Windows 8.1 RTM
hii
I am using windows 8.1 upgrades laptop, on which i found that adb and fastboot drivers are not working. It is giving error (device
failed enumeration)
I have tried every possible way on internet to update the driver but no success.
Please provide us the solution to work with it properlyHi,
Based on my research, I suggest you try the following steps to see if it works.
1.Press "Start Key/Windows Key + C" or move your cursor to top right corner of the screen to activate the Charm Bar and click on "Settings Button" as shown in following figure.
2.The setting panel will open. Click "Change PC Settings" from the bottom as shown.
3.You will have this PC Settings screen. Click on General Tab. and scroll down to the bottom to find "Advance Start up Option" as shown below and click on Restart. This is immediate restart so make sure all programs are closed and saved.
4.Your PC will reboot into Advance Start Up option. And you will see following screen. Now simply press on "Troubleshoot" option.
5..In troubleshoot click on "Advance Options”. In advance option select "Start-Up Settings" .
6.Now just press restart button in Start-Up settings as shown below. Your system will reboot in Start-Up Option Mode.
7.After your system is rebooted you will get this following screen. Here to choose options we have to use function keys. Now press "F7" to select "Disable Driver Signature Enforcement" .
Now your PC will boot with Disabled Driver Signature Enforcement and you will be able to install Flashtool/Fastboot drivers.
You can get this drivers from Post #2.
If the issue persists, I think the ADB fast boot related driver had a compatibility problem with Windows 8.1.
Also, I will forward this case to our product team.
Regards,
Kelvin_Hsu
TechNet Community Support -
Backupu0094and u0093Redo log backupu0094;Except operation are failed
I encounter a problem when i makeing backup,i ask for help.
<b>The situation is following:</b>os: windows 2003+sp2
SAP :NetWeaver 04S(BW7.0)
DB:ORACLE 10.2
Backup Software: VERITAS Backup Exec for Windows Servers 9.1
The problem which i encounter is following:
All are successful that use BRTOOLS operate OFFLINE BACKUP and OFFLINE BACKUP.
These operation are successful to use "DB13" Operate
Whole database online + redo log backup、Whole database online backupand Redo log backup;Except Whole database offline + redo log backup" and"Whole database offline backup" these two operation are failed
<b>successful AllOnl+Log</b> BRABCKUP Detail log for database BWD
Detailliertes Protokoll: bdvvpedp.anf
BR0051I BRBACKUP 7.00 (18)
BR0055I Start of database backup: bdvvpedp.anf 2007-08-03 13.32.37
BR0477I Oracle pfile D:\oracle\BWD\102\database\initBWD.ora created from spfile D:\oracle\BWD\102\database\spfileBWD.ora
BR0280I BRBACKUP time stamp: 2007-08-03 13.32.40
BR0319I Control file copy created: D:\oracle\BWD\sapbackup\CNTRLBWD.DBF 12664832
BR0101I Parameters
Name Value
oracle_sid BWD
oracle_home D:\oracle\BWD\102
oracle_profile D:\oracle\BWD\102\database\initBWD.ora
sapdata_home D:\oracle\BWD
sap_profile D:\oracle\BWD\102\database\initBWD.sap
backup_mode ALL
backup_type online
backup_dev_type util_file
util_par_file D:\usr\sap\BWD\SYS\exe\uc\NTI386\biparam.ini
system_info SAPServiceBWD KHBWDEV Windows 5.2 Build 3790 Service Pack 2 Intel
oracle_info BWD 10.2.0.2.0 8192 826 6112865 KHBWDEV UTF8 UTF8
sap_info 700 SAPSR3 BWD TEMPLICENSE R3_ORA INITIAL
make_info NTintel OCI_10201_SHARE Oct 27 2006
command_line brbackup -u / -jid ALLOG20070803133227 -c force -t online -m all -p initBWD.sap -a -c force -p initBWD.sap -cds
BR0116I ARCHIVE LOG LIST before backup for database instance BWD
Parameter Value
Database log mode Archive Mode
Automatic archival Enabled
Archive destination C:\oracle\BWD\oraarch\BWDarch
Archive format ARC%S_%R.%T
Oldest online log sequence 823
Next log sequence to archive 826
Current log sequence 826 SCN: 6112865
Database block size 8192 Thread: 1
Current system change number 6123378 ResetId: 628786982
BR0118I Tablespaces and data files
Tablespace TS-Status F-Status File Size Id. Device Link Type MaxSize IncrSize BlkSize
PSAPSR3 ONLINE* ONLINE+ D:\ORACLE\BWD\SAPDATA2\SR3_1\SR3.DATA1 2243960832 4 3 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ D:\ORACLE\BWD\SAPDATA2\SR3_2\SR3.DATA2 2327846912 5 3 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ D:\ORACLE\BWD\SAPDATA2\SR3_3\SR3.DATA3 2243960832 6 3 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ D:\ORACLE\BWD\SAPDATA2\SR3_4\SR3.DATA4 2243960832 7 3 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ D:\ORACLE\BWD\SAPDATA2\SR3_5\SR3.DATA5 2243960832 16 3 NOLINK FILE 3145728000 20971520 8192
PSAPSR3700 ONLINE* ONLINE+ D:\ORACLE\BWD\SAPDATA3\SR3700_1\SR3700.DATA1 3795853312 8 3 NOLINK FILE 10485760000 20971520 8192
PSAPSR3700 ONLINE* ONLINE+ D:\ORACLE\BWD\SAPDATA3\SR3700_2\SR3700.DATA2 3942653952 9 3 NOLINK FILE 10485760000 20971520 8192
PSAPSR3700 ONLINE* ONLINE+ D:\ORACLE\BWD\SAPDATA3\SR3700_3\SR3700.DATA3 3732938752 10 3 NOLINK FILE 10485760000 20971520 8192
PSAPSR3700 ONLINE* ONLINE+ D:\ORACLE\BWD\SAPDATA3\SR3700_4\SR3700.DATA4 3670024192 11 3 NOLINK FILE 10485760000 20971520 8192
PSAPSR3700 ONLINE* ONLINE+ D:\ORACLE\BWD\SAPDATA3\SR3700_5\SR3700.DATA5 3670024192 17 3 NOLINK FILE 4194304000 20971520 8192
PSAPSR3DB ONLINE* ONLINE+ D:\ORACLE\BWD\SAPDATA4\SR3DB_1\SR3DB.DATA1 2097160192 13 3 NOLINK FILE 10485760000 20971520 8192
PSAPSR3DB ONLINE* ONLINE+ D:\ORACLE\BWD\SAPDATA4\SR3DB_2\SR3DB.DATA2 2097160192 14 3 NOLINK FILE 10485760000 20971520 8192
PSAPSR3DB ONLINE* ONLINE+ D:\ORACLE\BWD\SAPDATA4\SR3DB_3\SR3DB.DATA3 1048584192 15 3 NOLINK FILE 10485760000 20971520 8192
PSAPSR3USR ONLINE* ONLINE+ D:\ORACLE\BWD\SAPDATA4\SR3USR_1\SR3USR.DATA1 20979712 12 3 NOLINK FILE 10485760000 20971520 8192
PSAPTEMP ONLINE# ONLINE+ D:\ORACLE\BWD\SAPDATA1\TEMP_1\TEMP.DATA1 1048584192 -1 3 NOLINK FILE 10485760000 20971520 8192
PSAPUNDO ONLINE- ONLINE+ D:\ORACLE\BWD\SAPDATA1\UNDO_1\UNDO.DATA1 8115986432 2 3 NOLINK FILE 10485760000 20971520 8192
SYSAUX ONLINE* ONLINE+ D:\ORACLE\BWD\SAPDATA1\SYSAUX_1\SYSAUX.DATA1 209723392 3 3 NOLINK FILE 10485760000 20971520 8192
SYSTEM ONLINE* SYSTEM+ D:\ORACLE\BWD\SAPDATA1\SYSTEM_1\SYSTEM.DATA1 524296192 1 3 NOLINK FILE 10485760000 20971520 8192
BR0119I Redo log files
File Size Group Device Status Link Type
D:\ORACLE\BWD\ORIGLOGA\LOG_G11M1.DBF 52429312 1 3 INUSE NOLINK FILE
C:\ORACLE\BWD\MIRRLOGA\LOG_G11M2.DBF 52429312 1 2 INUSE NOLINK FILE
D:\ORACLE\BWD\ORIGLOGB\LOG_G12M1.DBF 52429312 2 3 INUSE NOLINK FILE
C:\ORACLE\BWD\MIRRLOGB\LOG_G12M2.DBF 52429312 2 2 INUSE NOLINK FILE
D:\ORACLE\BWD\ORIGLOGA\LOG_G13M1.DBF 52429312 3 3 INUSE NOLINK FILE
C:\ORACLE\BWD\MIRRLOGA\LOG_G13M2.DBF 52429312 3 2 INUSE NOLINK FILE
D:\ORACLE\BWD\ORIGLOGB\LOG_G14M1.DBF 52429312 4 3 INUSE NOLINK FILE
C:\ORACLE\BWD\MIRRLOGB\LOG_G14M2.DBF 52429312 4 2 INUSE NOLINK FILE
BR0120I Control files
File Size Id. Device Link Type
D:\oracle\BWD\origlogA\cntrl\cntlrBWD.dbf 12664832 0 3 NOLINK FILE
D:\oracle\BWD\origlogB\cntrl\cntrlBWD.dbf 12664832 0 3 NOLINK FILE
D:\oracle\BWD\sapdata1\cntrl\cntrlBWD.dbf 12664832 0 3 NOLINK FILE
BR0616I Tablespaces in table TSORA for SAP owner SAPSR3:
PSAPSR3, PSAPSR3700, PSAPSR3USR
BR0280I BRBACKUP time stamp: 2007-08-03 13.32.40
BR0057I Backup of database: BWD
BR0058I BRBACKUP action ID: bdvvpedp
BR0059I BRBACKUP function ID: anf
BR0110I Backup mode: ALL
BR0077I Database file for backup: D:\oracle\BWD\sapbackup\CNTRLBWD.DBF
BR0061I 18 files found for backup, total size 42192.211 MB
BR0143I Backup type: online
BR0130I Backup device type: util_file
BR0109I Files will be saved by backup utility
BR0289I BRARCHIVE will be started at the end of processing
BR0134I Unattended mode with 'force' active - no operator confirmation allowed
BR0280I BRBACKUP time stamp: 2007-08-03 13.32.41
BR0315I 'Alter database begin backup' successful
BR0280I BRBACKUP time stamp: 2007-08-03 13.32.41
BR0229I Calling backup utility with function 'backup'...
BR0280I BRBACKUP time stamp: 2007-08-03 13.34.10
#FILE..... D:\oracle\BWD\sapbackup\CNTRLBWD.DBF
#SAVED.... 1186119250
BR0280I BRBACKUP time stamp: 2007-08-03 13.34.29
#FILE..... D:\ORACLE\BWD\SAPDATA1\SYSAUX_1\SYSAUX.DATA1
#SAVED.... 1186119250
BR0280I BRBACKUP time stamp: 2007-08-03 13.35.13
#FILE..... D:\ORACLE\BWD\SAPDATA1\SYSTEM_1\SYSTEM.DATA1
#SAVED.... 1186119250
BR0280I BRBACKUP time stamp: 2007-08-03 13.46.48
#FILE..... D:\ORACLE\BWD\SAPDATA1\UNDO_1\UNDO.DATA1
#SAVED.... 1186119250
BR0280I BRBACKUP time stamp: 2007-08-03 13.49.58
#FILE..... D:\ORACLE\BWD\SAPDATA2\SR3_1\SR3.DATA1
#SAVED.... 1186119250
BR0280I BRBACKUP time stamp: 2007-08-03 13.53.15
#FILE..... D:\ORACLE\BWD\SAPDATA2\SR3_2\SR3.DATA2
#SAVED.... 1186119250
BR0280I BRBACKUP time stamp: 2007-08-03 13.56.26
#FILE..... D:\ORACLE\BWD\SAPDATA2\SR3_3\SR3.DATA3
#SAVED.... 1186119250
BR0280I BRBACKUP time stamp: 2007-08-03 13.59.36
#FILE..... D:\ORACLE\BWD\SAPDATA2\SR3_4\SR3.DATA4
#SAVED.... 1186119250
BR0280I BRBACKUP time stamp: 2007-08-03 14.02.46
#FILE..... D:\ORACLE\BWD\SAPDATA2\SR3_5\SR3.DATA5
#SAVED.... 1186119250
BR0280I BRBACKUP time stamp: 2007-08-03 14.08.08
#FILE..... D:\ORACLE\BWD\SAPDATA3\SR3700_1\SR3700.DATA1
#SAVED.... 1186119250
BR0280I BRBACKUP time stamp: 2007-08-03 14.13.42
#FILE..... D:\ORACLE\BWD\SAPDATA3\SR3700_2\SR3700.DATA2
#SAVED.... 1186119250
BR0280I BRBACKUP time stamp: 2007-08-03 14.18.59
#FILE..... D:\ORACLE\BWD\SAPDATA3\SR3700_3\SR3700.DATA3
#SAVED.... 1186119250
BR0280I BRBACKUP time stamp: 2007-08-03 14.24.10
#FILE..... D:\ORACLE\BWD\SAPDATA3\SR3700_4\SR3700.DATA4
#SAVED.... 1186119250
BR0280I BRBACKUP time stamp: 2007-08-03 14.29.21
#FILE..... D:\ORACLE\BWD\SAPDATA3\SR3700_5\SR3700.DATA5
#SAVED.... 1186119250
BR0280I BRBACKUP time stamp: 2007-08-03 14.32.18
#FILE..... D:\ORACLE\BWD\SAPDATA4\SR3DB_1\SR3DB.DATA1
#SAVED.... 1186119250
BR0280I BRBACKUP time stamp: 2007-08-03 14.35.16
#FILE..... D:\ORACLE\BWD\SAPDATA4\SR3DB_2\SR3DB.DATA2
#SAVED.... 1186119250
BR0280I BRBACKUP time stamp: 2007-08-03 14.36.45
#FILE..... D:\ORACLE\BWD\SAPDATA4\SR3DB_3\SR3DB.DATA3
#SAVED.... 1186119250
BR0280I BRBACKUP time stamp: 2007-08-03 14.36.47
#FILE..... D:\ORACLE\BWD\SAPDATA4\SR3USR_1\SR3USR.DATA1
#SAVED.... 1186119250
BR0280I BRBACKUP time stamp: 2007-08-03 14.55.51
BR0232I 18 of 18 files saved by backup utility
BR0230I Backup utility called successfully
BR0280I BRBACKUP time stamp: 2007-08-03 14.55.56
BR0317I 'Alter database end backup' successful
BR0280I BRBACKUP time stamp: 2007-08-03 14.55.56
BR0340I Switching to next online redo log file for database instance BWD ...
BR0321I Switch to next online redo log file for database instance BWD successful
BR0117I ARCHIVE LOG LIST after backup for database instance BWD
Parameter Value
Database log mode Archive Mode
Automatic archival Enabled
Archive destination C:\oracle\BWD\oraarch\BWDarch
Archive format ARC%S_%R.%T
Oldest online log sequence 824
Next log sequence to archive 827
Current log sequence 827 SCN: 6126274
Database block size 8192 Thread: 1
Current system change number 6126276 ResetId: 628786982
BR0018I Waiting for the next offline redo log file...
BR0280I BRBACKUP time stamp: 2007-08-03 14.56.02
BR0229I Calling backup utility with function 'backup'...
BR0280I BRBACKUP time stamp: 2007-08-03 14.57.29
#PFLOG.... D:\oracle\BWD\102\database\initBWD.ora
#SAVED.... 1186124248
BR0280I BRBACKUP time stamp: 2007-08-03 14.57.29
#PFLOG.... D:\oracle\BWD\102\database\initBWD.sap
#SAVED.... 1186124248
BR0280I BRBACKUP time stamp: 2007-08-03 14.57.30
#PFLOG.... D:\oracle\BWD\102\database\spfileBWD.ora
#SAVED.... 1186124248
BR0280I BRBACKUP time stamp: 2007-08-03 14.57.30
#PFLOG.... D:\oracle\BWD\sapbackup\backBWD.log
#SAVED.... 1186124248
BR0280I BRBACKUP time stamp: 2007-08-03 14.57.31
#PFLOG.... D:\oracle\BWD\sapbackup\bdvvpedp.anf
#SAVED.... 1186124248
BR0280I BRBACKUP time stamp: 2007-08-03 14.57.31
#PFLOG.... D:\oracle\BWD\sapreorg\spaceBWD.log
#SAVED.... 1186124248
BR0280I BRBACKUP time stamp: 2007-08-03 14.57.31
#PFLOG.... D:\oracle\BWD\sapreorg\strucBWD.log
#SAVED.... 1186124248
BR0280I BRBACKUP time stamp: 2007-08-03 14.57.33
#PFLOG.... D:\usr\sap\BWD\SYS\exe\uc\NTI386\biparam.ini
#SAVED.... 1186124248
BR0280I BRBACKUP time stamp: 2007-08-03 15.01.28
BR0232I 8 of 8 files saved by backup utility
BR0230I Backup utility called successfully
BR0056I End of database backup: bdvvpedp.anf 2007-08-03 15.01.28
BR0280I BRBACKUP time stamp: 2007-08-03 15.01.28
BR0052I BRBACKUP completed successfully
BR0280I BRBACKUP time stamp: 2007-08-03 15.01.28
BR0291I BRARCHIVE will be started with options '-U -jid ALLOG20070803133227 -d util_file -c force -p initBWD.sap -cds'
BR0280I BRBACKUP time stamp: 2007-08-03 15.15.55
BR0292I Execution of BRARCHIVE finished with return code 0
Failed AllOff+Log
BRABCKUP Detail log for database BWD
Detailliertes Protokoll: bdvvvghm.aff
BR0051I BRBACKUP 7.00 (18)
BR0055I Start of database backup: bdvvvghm.aff 2007-08-04 19.14.26
BR0477I Oracle pfile D:\oracle\BWD\102\database\initBWD.ora created from spfile D:\oracle\BWD\102\database\spfileBWD.ora
BR0101I Parameters
Name Value
oracle_sid BWD
oracle_home D:\oracle\BWD\102
oracle_profile D:\oracle\BWD\102\database\initBWD.ora
sapdata_home D:\oracle\BWD
sap_profile D:\oracle\BWD\102\database\initBWD.sap
backup_mode ALL
backup_type offline_force
backup_dev_type util_file
util_par_file D:\usr\sap\BWD\SYS\exe\uc\NTI386\biparam.ini
system_info SAPServiceBWD KHBWDEV Windows 5.2 Build 3790 Service Pack 2 Intel
oracle_info BWD 10.2.0.2.0 8192 829 6191434 KHBWDEV UTF8 UTF8
sap_info 700 SAPSR3 BWD TEMPLICENSE R3_ORA INITIAL
make_info NTintel OCI_10201_SHARE Oct 27 2006
command_line brbackup -u / -jid ALGOF20070804191417 -c force -t offline_force -m all -p initBWD.sap -a -c force -p initBWD.sap -cds
BR0116I ARCHIVE LOG LIST before backup for database instance BWD
Parameter Value
Database log mode Archive Mode
Automatic archival Enabled
Archive destination C:\oracle\BWD\oraarch\BWDarch
Archive format ARC%S_%R.%T
Oldest online log sequence 826
Next log sequence to archive 829
Current log sequence 829 SCN: 6191434
Database block size 8192 Thread: 1
Current system change number 6215407 ResetId: 628786982
BR0118I Tablespaces and data files
Tablespace TS-Status F-Status File Size Id. Device Link Type MaxSize IncrSize BlkSize
PSAPSR3 ONLINE* ONLINE+ D:\ORACLE\BWD\SAPDATA2\SR3_1\SR3.DATA1 2243960832 4 3 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ D:\ORACLE\BWD\SAPDATA2\SR3_2\SR3.DATA2 2327846912 5 3 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ D:\ORACLE\BWD\SAPDATA2\SR3_3\SR3.DATA3 2243960832 6 3 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ D:\ORACLE\BWD\SAPDATA2\SR3_4\SR3.DATA4 2243960832 7 3 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ D:\ORACLE\BWD\SAPDATA2\SR3_5\SR3.DATA5 2243960832 16 3 NOLINK FILE 3145728000 20971520 8192
PSAPSR3700 ONLINE* ONLINE+ D:\ORACLE\BWD\SAPDATA3\SR3700_1\SR3700.DATA1 3795853312 8 3 NOLINK FILE 10485760000 20971520 8192
PSAPSR3700 ONLINE* ONLINE+ D:\ORACLE\BWD\SAPDATA3\SR3700_2\SR3700.DATA2 3942653952 9 3 NOLINK FILE 10485760000 20971520 8192
PSAPSR3700 ONLINE* ONLINE+ D:\ORACLE\BWD\SAPDATA3\SR3700_3\SR3700.DATA3 3732938752 10 3 NOLINK FILE 10485760000 20971520 8192
PSAPSR3700 ONLINE* ONLINE+ D:\ORACLE\BWD\SAPDATA3\SR3700_4\SR3700.DATA4 3670024192 11 3 NOLINK FILE 10485760000 20971520 8192
PSAPSR3700 ONLINE* ONLINE+ D:\ORACLE\BWD\SAPDATA3\SR3700_5\SR3700.DATA5 3670024192 17 3 NOLINK FILE 4194304000 20971520 8192
PSAPSR3DB ONLINE* ONLINE+ D:\ORACLE\BWD\SAPDATA4\SR3DB_1\SR3DB.DATA1 2097160192 13 3 NOLINK FILE 10485760000 20971520 8192
PSAPSR3DB ONLINE* ONLINE+ D:\ORACLE\BWD\SAPDATA4\SR3DB_2\SR3DB.DATA2 2097160192 14 3 NOLINK FILE 10485760000 20971520 8192
PSAPSR3DB ONLINE* ONLINE+ D:\ORACLE\BWD\SAPDATA4\SR3DB_3\SR3DB.DATA3 1048584192 15 3 NOLINK FILE 10485760000 20971520 8192
PSAPSR3USR ONLINE* ONLINE+ D:\ORACLE\BWD\SAPDATA4\SR3USR_1\SR3USR.DATA1 20979712 12 3 NOLINK FILE 10485760000 20971520 8192
PSAPTEMP ONLINE# ONLINE+ D:\ORACLE\BWD\SAPDATA1\TEMP_1\TEMP.DATA1 1048584192 -1 3 NOLINK FILE 10485760000 20971520 8192
PSAPUNDO ONLINE- ONLINE+ D:\ORACLE\BWD\SAPDATA1\UNDO_1\UNDO.DATA1 8115986432 2 3 NOLINK FILE 10485760000 20971520 8192
SYSAUX ONLINE* ONLINE+ D:\ORACLE\BWD\SAPDATA1\SYSAUX_1\SYSAUX.DATA1 209723392 3 3 NOLINK FILE 10485760000 20971520 8192
SYSTEM ONLINE* SYSTEM+ D:\ORACLE\BWD\SAPDATA1\SYSTEM_1\SYSTEM.DATA1 524296192 1 3 NOLINK FILE 10485760000 20971520 8192
BR0119I Redo log files
File Size Group Device Status Link Type
D:\ORACLE\BWD\ORIGLOGA\LOG_G11M1.DBF 52429312 1 3 INUSE NOLINK FILE
C:\ORACLE\BWD\MIRRLOGA\LOG_G11M2.DBF 52429312 1 2 INUSE NOLINK FILE
D:\ORACLE\BWD\ORIGLOGB\LOG_G12M1.DBF 52429312 2 3 INUSE NOLINK FILE
C:\ORACLE\BWD\MIRRLOGB\LOG_G12M2.DBF 52429312 2 2 INUSE NOLINK FILE
D:\ORACLE\BWD\ORIGLOGA\LOG_G13M1.DBF 52429312 3 3 INUSE NOLINK FILE
C:\ORACLE\BWD\MIRRLOGA\LOG_G13M2.DBF 52429312 3 2 INUSE NOLINK FILE
D:\ORACLE\BWD\ORIGLOGB\LOG_G14M1.DBF 52429312 4 3 INUSE NOLINK FILE
C:\ORACLE\BWD\MIRRLOGB\LOG_G14M2.DBF 52429312 4 2 INUSE NOLINK FILE
BR0120I Control files
File Size Id. Device Link Type
D:\oracle\BWD\origlogA\cntrl\cntlrBWD.dbf 12664832 0 3 NOLINK FILE
D:\oracle\BWD\origlogB\cntrl\cntrlBWD.dbf 12664832 0 3 NOLINK FILE
D:\oracle\BWD\sapdata1\cntrl\cntrlBWD.dbf 12664832 0 3 NOLINK FILE
BR0616I Tablespaces in table TSORA for SAP owner SAPSR3:
PSAPSR3, PSAPSR3700, PSAPSR3USRThanks, I'm actually on 12 and facing the same issue. did you replace your executables as well?
cheers
kev -
iTunes on my Windows Vista has failed to update over several weeks. Audio will not play out. Attempting uninstal/reinstall according to iTunes support page. Will not uninstall 'Apple Mobile Device Support' - goes to 99% then progress bar unwinds completely. Tried rebooting. Any clues??
Hey petanque1,
Thanks for the question. I understand that you are experiencing issues installing iTunes for Windows. The following article outlines the error message you are receiving and a potential resolution:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Some Windows customers may experience installation issues while trying to install or open iTunes 11.1.4.
Symptoms may include:
"The program can't start because MSVCR80.dll is missing from your computer"
"iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows Error 126)”
"Runtime Error: R6034 - An application has made an attempt to load the C runtime library incorrectly"
"Entry point not found: videoTracks@QTMovie@@QBE?AV?$Vector@V?$RefPtr@VQTTrack@@@***@@$0A@VCrashOnOverf low@@***@@XZ could not be located in the dynamic link library C:\Program Files(x86)\Common Files\Apple\Apple Application Support\WebKit.dll”
Resolution
Follow these steps to resolve the issue:
Check for .dll files
1. Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
2. If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
3. Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
1. Uninstall iTunes and all of its related components.
2. Reboot your computer. If you can't uninstall a piece of Apple software, try using theMicrosoft Program Install and Uninstall Utility.
3. Re-download and reinstall iTunes 11.1.4.
Thanks,
Matt M. -
Mid way through download of I-Tunes after clearing every Apple program from my computer I get "Apple Mobile Device Service" failed to start message. Eventually leading to Windows error 193 (error 7). How do I get Apple Mobile Device Service to start so I do not get error messages and failure of I-Tunes to install?
If you have a 64-bit machine, then try the "for older video cards" version...
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2 -
Sorry for the repeat post but I want to get more help with this.
Prior to problem: All devices surfing wirelessly on Airport Express.
Replaced Airport Express with Time Capsule.
Problem: Wife's iPhone4 (5.1.1) can not surf on wifi provided by my time capsule. All my other devices (iMac, Mac Air, iPad and my iPhone) can. Wife's iPhone can surf on an unsecure network somewhere nearby in my apartment complex. (Which to me, rules out a hardware problem).
Steps taken: Tapped iPhone wifi On/Off multiple times with no change. "Forget this network" multiple times with no change. Reset iPhone Network Settings multiple times with no change. Restored iPhone using iTunes as New iPhone once with no change. (Since doing that, I have restored with back up of iPhone settings and data.) Powered Time Capsule on/off several times with no change. Turned wireless security off with no change. Security is back on. It is WPA 2 Personal with a lengthy password. I'm not getting the "incorrect password" msg. Renewed lease multiple times with no change.
Other indications: 3G is in upper left. Status wheel is spinning next to my network's name. On the initial "Settings" window, my network name is shown (as if it were connected. But tapping it and going to the "wifi networks" window shows the list of available networks with the status wheel spinning next to mine.) Tapping the blue arrow on my network name leads to the window that has "forget this network" at the top, and a list of blank fields: IP address, subnet mask, router and so on. DHCP is chosen, HTTP proxy is OFF. Sometimes, the top two fields (ip address and subnet mask) have values filled in, but the rest of the fields don't.
On my Time Capsule, as seen via Airport Utility (V5.5.3), 3 devices are shown as connected. Clicking this provides a listing. My wife's iPhone wi-fi address is listed. It's "rate" however is 1. My imac is 216 and my iphone is 65. BTW, iOS devices drop off the list when they go to sleep. No big deal there.
Back to Airport Utility, in the summary tab... status is normal, version is 7.6.1, wireless mode is "create a wireless network", security is "wpa/wpa2 personal", channel is 149 auto and 1 auto (I tried changing 1 to 11 with no change), connect using "ethernet" and finally my IP address begings with 76. 76.xxx.xxx.xxx
Moving to the "Wireless" tab of Airport utility... wireless mode is "create a wireless network", radio mode is auto, radio ch. selection is auto, wireless security is wpa/wpa2 personal, "remember password in keychain" is checked. Now Clicking on the "wireless network options" button..... 5ghz is not checked, country is USA, multicast rate is "low", t-mit power is "100%", WPA group key timeout is 1 day (it used to be 1 hour but this has made no change in the problem), "use wide channels" is not checked, "create a closed network" is not checked.
MAC access control is not enabled. But it was enabled previously and I added my devices by their Wi-Fi addresses one at a time until i decided to turn it off due to this problem. this resulted in no change with the problem.
Personally, I feel the prob lies with the DHCP and ip address and related fields, but I don't know enough about what their values should be in relation to my other devices to alter them on my own.I pasted below a response that helped.... sort of. I followed the directions below. At the end, all my devices were connected to my network. BUT, the last device I connected, my MacAir, did not stay connected for long. It now has the exclamation point in the middle of the wi-fi icon in the top right of the screen.
This event agrees with my original problem: It was my wife's iPhone that was the last to be connected to my network and the only one to fail to connect.
Is there a limit to how many devices can be connected to my time capsule? I have 5 devices. What is "extending?" Do I need to do that?
Bob Timmons Texas
This solved my questionRe: Airport Express wifi network not working
Mar 1, 2012 1:46 PM (in response to Don_McCracken)
Open AirPort Utility and click Manual Setup
Click the Internet icon, then click the Internet Connection tab
Make sure that the setting for Connection Sharing = Off (Bridge Mode)
Update to save any changes
Then power down the entire network...all devices....power down order is not important
Wait a few minutes
Power up the modem/router first and let it run a full minute by itself
Power up the Express the same way
Continue powering up devices one at a time the same way until everything is powered back up
You should be able to connect through the Express and on to the Internet -
Help! Following a standard upgrade I got the error message "iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows Error 193).
I am running Windows 7 and installing again brings the message "Apple Mobile Device Service failed to start. Verify that you have sufficient privileges to start system services"
I have uninstalled everything Apple, deleted all related folders and run as administrator numerous times with no luck.
I had hoped that iTunes 12.1.2 would resolve the issue, unfortunately it failed to do so leaving me iTunes free which is driving me mad!
Can anyone advise what else I can do to resolve the error and bring back iTunes?
ThanksFor general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version, or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2 -
Windows Server 2008 R2 - No Audio Devices are installed
I have a Vm that is running windows Server 2008 R2. I says there are "No Audio Devices are installed" I have tried everything!!!
this :
Please launch Device Manager, right click on the sound card and select “Update Driver Software” to check if it can be updated via Windows Update.
everything!!!
please help!!!
I am using a VM from AWSQuote from irfan H
The error message indicates that the Audio service is failing to start on your computer.
You can try the below methods to fix this issue:
Method 1:
Run Audio troubleshooter that will automatically diagnose and fix any audio issues. You can refer this article to run Audio troubleshooter:
http://windows.microsoft.com/en-US/windows7/Open-the-Playing-Audio-troubleshooter
Method 2:
Check the services manually.
I suggest that you check if the dependency services are started and check if you have the same issue.
a. Click Start, type Services.msc in the Start Search box.
b. Scroll down the list of services, right-click Windows Audio and select Start.
c. Select Properties for Windows Audio and set its Startup Type to Automatic.
If the Windows Audio service does not start and you get the error ‘Error 1068: The dependency service or group failed to start, then make sure that the following services are started and their Startup Type is set to Automatic’
a. Plug and Play
b. Multimedia Class Scheduler
c. Windows Audio Endpoint Builder
Method 3:
If the dependency services are not starting, you can uninstall and reinstall the Audio drivers. This will reset all the Audio components on your computer.
To uninstall a device with Device Manager:
a. Click on start and type devmgmt.msc
b. In Device Manager's left panel, open the node that represents. You should be able to find the Audio device under the Sound, Audio and Game controller. Uninstall and then right-click the device entry.
c. On the shortcut menu, click Uninstall.
d. On the Confirm Device Removal dialog box, click OK to start the uninstall process.
Once you uninstall the device, install the latest drivers by downloading it from the manufacturers’ website (Realtek).
Note:Make sure that you have the source to install the Audio drivers before you install it. Also create a System restore point before uninstalling the device.
Thanks,
Irfan H, Microsoft Answers Support Engineer. Visit our Microsoft Answers Feedback Forum and let us know what you think. -
Upgrade from windows vista to windows 7. No audio devices are installed.
Monitor with built in speakers= HP w2007
Desktop= HP Pavillion a6050e
Did support chat with microsoft and they cannot solve the issue.
Running the original disc that came with the monitor did no solve the issue. Running it in vista compatibility did not solve the issue either.
Tried to update from HP support drivers for vista and it didn't not solve the issue.
There are no driver updates fround for windows 7 in hp support.
-audio symbol in task bar shows red x
-device manager shows: other devices/multimedia audio control/the drivers for this device are not installed. (code 28)
----when i try to update the driver it says windows cannot find driver software for your device.
Please help, this is frustrating.after hours of dealing with microsoft suppor and HP support I got annoyed and tired. I then decided to check out the bios and figured out the solution myself!!!!
when booting computer do F10 setup. Change the audio from auto to enabled. Then the computer recognizes the audio device and installs updates. right click on the audio icon in the taskbar and select playback devices then pick your device.
What a waste of a day..... hopefully this helps out other people and HP/Microsoft needs to put this on their support site. -
I have the following:-
VMWare workstation version 9 , with windows server 2008 R2 data center installed.
- I have installed the windows 2008 R2 inside the VM using an iso image.
- The host is windows 7.
I use to work well with the VM, but after adding a new VM to the same workstation . I start getting the following error when starting my old VM
ramdisk device creation failed sue to insufficient memory.
And on the windows boot manger screen they mentioned to :-
inset my windows installation dis and restart my PC.
click “repair your computer”
but not sure if this will fix the problem , baring in mind that the RAM assigned to the VM
is 24 GB & 80 GB hard disk.
The error is
Link.
so can any one advice what is causing this error?
ThanksYou might start by checking the RAM.
http://windows.microsoft.com/en-US/windows7/Diagnosing-memory-problems-on-your-computer
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights. -
After downloading latest Reader software (11) on my Mac (OS10.7.5) I cannot print pdf files on either of my two printers. I suspect corrupt software. How do I uninstall and reinstall the software? Adobe's on-line instructions are only for Window devices.
You can just drag the file to the trash. If you want you can remove the pdf plug-in from the internet-plug in folder, but that should not be necessary to correct your problem.
-
I just want to see what devices are logged in under my apple I.D and be able to log them out
You cannot see which devices are logged in to your Apple ID but you can see which devices is using your iCloud account for Find My iPhone. See this article on how to remove devices from your iCloud account remotely iCloud: Remove your device from Find My iPhone.
Edit: You do however get an email notification when someone signs in to your Apple ID on a new device.
Message was edited by: Monstermoster -
Windows 8.1 and updated iTunes. My devices are not recognized.
Windows 8.1 and updated iTunes. My devices are not recognized. Uninstalled and reinstalled iTunes and the AMDS isn't installed. Extracted the setup files and ran the AppleMobileSupport64.msi but the install states my system is not configured....
Apple Mobile Device Support wasn't installed on your computer.
The installer encountered errors before Apple Mobile Device Support could be configured.
Your system has not been modified. To retry these operations at a later time, please run the installer again. -
Buttons created with edge animate are not working on android and windows devices
Hello, I created a moble version of my website with edge animate (3.0).
The menue-bars/buttons work fine with iphone and ipad, but not with android and windows devices.
http://www.design-werk.org/buchgestaltung_kunstbuch.html
Does anyone have an idea and can help me with that?
Thank you guys,
WolframHello, I created a moble version of my website with edge animate (3.0).
The menue-bars/buttons work fine with iphone and ipad, but not with android and windows devices.
http://www.design-werk.org/buchgestaltung_kunstbuch.html
Does anyone have an idea and can help me with that?
Thank you guys,
Wolfram -
I have a dell 64 bit pc and had an older version of ITunes installed. When I tried to install the 12--- version, the install stopped with the message, "Apple Mobile Device Services failed to start, verify that you have sufficient privileges to start systems services". I have no clue what that means. can anyone help. ????
Hi doywks,
The Apple Mobile Device is a component of iTunes that communicates between your computer and your iPhone or iOS device. The error message you are seeing "verify that you have sufficient privileges to start system services" has to do with the Windows operating system. It's possible that you are not logged in as the administrator for your Windows PC. Or, you may have antivirus software stopping the Apple Mobile Device from running.
If you are having issues updating iTunes on your PC, follow the steps in the article below.
If you can't install or update iTunes for Windows - Apple Support
https://support.apple.com/en-us/HT201668
How to restart the Apple Mobile Device Service (AMDS) on Windows - Apple Support
https://support.apple.com/en-us/HT203188
I hope this information helps ....
- Judy
Maybe you are looking for
-
I have tried transferring my iphoto library to my external hard drive and it's not working.
I have a Macbook Pro. I have recently gotten into photography and to save space on my internal hard drive, I bought an external hard drive to keep all of my photos on. It's a Toshiba with 1 TB of memory. I have searched and searched on how to transfe
-
Configuring Apache HTTP as an RPS
Longback i configured Apache HTTP as an Reverse proxy to weblogic for singlesignon with OAM. that time i downloaded the Apache HTTP server Plugin from the below link http://e-docs.bea.com/wls/docs92/plugins/apache.html but after oracle aquiring the o
-
Clone database with no archive log mode and downtime with new file structure
We need to clone database with following business requirements : No downtime at all can be afford databases are in no archive log mode data-file locations need to be change to new mount points while cloning for space management factor Please suggest
-
ITunes 10.7 copies podcasts twice
My computer installed iTunes 10.7 this morning and proceded to copy my library into the new version. It copied most, but not all, of my podcasts twice. In most cases, it left one episode out of one of the copies. If I try to remove one copy of a podc
-
How to delete icloud and still use find my iphone and delete old purchases
hi everyone, i want to get rid of my i cloud accout as i think i use nothing on it. how do i do this? if i delete it can i use find my iphone? also in itunes, purchases,app there are about 100 apps i would like to DELETE not hide, this somehow is als