Windows disc does not update after resizing boot camp partition

When I bought my iMac, it came with a 500 GB HDD. I used bootcamp to make a 200GB windows partition and a 300GB Mac partition. The other day I bought a 250GB SSD, and moved everything from my 300GB Mac partition onto the SSD.
My plan was to use the whole 500GB HDD for windows. So, I deleted the 300GB Mac partition and made it free space on the drive. I then expanded the boot camp partition to take up the whole drive using Mini Tool on windows 7.
Now, windows 7 shows that my drive is 465GB, but when I boot into mac, the bootcamp hard drive still reads 200GB and 300GB are "free space" even though I expanded the drive using Mini Tool.
I tried to fix this by filling up the hard drive with an extra 120 GB so it exceeded the 200GB limit that windows shows. But when I booted back into OSX to see if it had worked, none of the files were showing up in the drive, making me believe that boot camp and OS X are not reading changes I am making to the bootcamp drive when I use Windows.
How can I change this so Disk Utility shows the full size of the disc, like Mini Tool does?
I will try to upload screenshots soon.

Re-sizing Windows partitions is not supported on Bootcamp. It requires a clean install. The other option is using Winclone.
Boot Camp 5.1: Frequently asked questions
How can a Windows partition be resized after Windows is installed?
You need to delete the Windows partition using the Boot Camp Assistant, and start over to change the size of the Windows partition. Back up your important Windows files first.

Similar Messages

Resized Boot Camp partition; now I have "disk0s4"

OK so i was following this tutorial on how to increase your boot camp partition from this website.
Following this blog post:
http://blog.craigharvey.me/2012/09/02/resize-boot-camp-partition-for-free-window s-8/
I resized my Boot Camp partition to give Windows 7 more space. In Disk Utility on OS X ML, I reduced the size of my OS X partition. So then i clicked apply and now that partition says disk0s4. I tried to verfiy and repair it through disk utitlity but It wont let me as there are problems. I have reiszed my parition before and never had this problem before. What did I do wrong and will I be able to fix it?

As you have found out, those instructions do not work, so.
If you can you still boot to OSX, you can Use Boot Camp to remove the Windows partition and return the Mac to normal, then start agin.
Next time you need to resize an NTFS partition use Paragon Camp Tune, which can do it without borking things.
Do Not Ever use Disk Utility to do anything to a Windows partition, it will make the problem worse.

Windows 8 does not have a USB boot option

QuestionHow can I boot my Windows 8 laptop from a USB device? I created a recovery disk on a USB thumb drive.
So far I have:
Entered into the UEFI (BIOS) and set USB to boot first.
Disabled secure boot.
I tried to reboot using the general setup options for startup in the windows settings page. I choose boot from USB through the UEFI, but got an error message that system does not have a USB boot option.
To confirm I also created a bootable DVD with an ISO burner, but my laptop cannot detect a DVD boot option either.
I assumed that the firmware of the UEFI for this computer allowed a bootable USB but in practice I cannot seem to get this work.
AnswerTo assist with not being able to boot from a USB device on a Windows 8 laptop, perform the following:
Plug in USB bootable device.
Hold down F12 when restarting and access UEFI menu (option is below drive list). If system is set to fast boot, CLICK HERE for instructions on entering the UEFI.
Go to UEFI and make USB "1st boot".
Disable secure boot.
Go to the "Advance" Tab, select "System".
Change boot order from UEFI to CSM.
Save changes and exit (F10).
Computer will restart and boot from USB drive.
When finished go back into the UEFI and set defaults then save changes and exit (F10). Windows 8 will reboot normally next reboot.

Done that, only choices are "Set up Firefox to Sync" & "Pair a Device". No ''UNLINK THIS DEVICE". Your turn.

Chart does not update after table changes

Simple X-Y chart using a data series from a table. The chart will not update after changing the table, for example after applying a filter. The chart will update if you close and reopen the file or go to Select Data on the chart. I use named ranges
because you can't use table nomenclature directly in the chart series definition.

Seems to update for me OK. You need to apply the entire unfiltered range to the chart before filtering. Did you do this or filter first and only apply the visible range?
If not the answer to you query then maybe I am not understanding the problem correctly so can you upload an example workbook?
Guidelines to post a workbook on OneDrive
Zip your workbooks. I prefer that you do not just save to OneDrive. (To Zip a file, in Windows Explorer Right click on the selected file and select Send to -> Compressed (zipped) folder.)
Go to this link. https://onedrive.live.com
Use the same login Id and Password that you use for this forum.
Select Upload in the blue bar across the top and browse to the zipped folder to be uploaded and select Open (or just double click). (Be patient and give it time to display the file after initially seeing the popup indicating it is done.)
Right click the file on OneDrive and select Share.
Do NOT fill in the form; "Select Get a Link" on the left side.
Click the button "Create a Link"
Click in the box where the link is created and it will highlight.
Copy the link and paste into your reply on this forum.
Regards, OssieMac

How do install windows hard drive (from dead pc) into boot camp partition

My Windows 7 desktop died recently, so I took the opportunity to buy a Mac Mini (latest version as of Feb 2012) as a replacement. I want to transfer the Windows 7 installation (from the dead PC) including all applications, accounts, settings, user files, etc to the Boot Camp Partition. Can someone please provide the steps on how to perform the Win 7 migration to the Mac Mini.

Just to clarify:
I want to install the Windows 7 installation from dead the PC into the Mac Mini's Boot Camp partition.
I installed the PC's hard drive into an enclosure and connected it to the Mac Mini via the USB port.
What I want to do is the following:
1) Do a Windows 7 "fresh" install in the Mac Mini Boot Camp partition.
2) Migrate all the applications installed on the Windows 7 PC and their associated data.
3) Migrate all user accounts and data.
Is there a tool that can transfer all applications and user accounts from the Windows 7 Hard Drive to the Boot Camp partition on the Mini?
Based on the documentation the Window Migration tool is Lion OS utility and does not perform a complete migration of all applications installed on the Windows machine.
thank you.

Windows XP Setup doesn't recognize my Boot Camp partition! HELP!!!

I just got my MacBook two days ago, and as soon as I got it, the first thing I did was partition the hard drive using Boot Camp Assistant, but didn't have an XP installation disk, so just left the partitions until I got the disk. But then today I got a Windows XP Home Edition SP2 Install Disk. I followed all of the instructions in Boot Camp, and I started the setup. When I got to the menu that said to choose a partition, it only showed my Mac OS X partition and not the Boot Camp partition. The only partition there was Partition 1, file system unknown, and so I quit the setup and booted up into Mac, and deleted the partition, then made another one in Boot Camp Assistant. I then tried the setup again, and got the same exact thing. Has anybody else had this problem, and if you have, how did you resolve it? This is very annoying, and any help would be appreciated.

dcarmody wrote:
I called AppleCare and they told me that it is doing this because it is an OEM version that came with my sister's Dell. You need either a retail copy or the other type of OEM OS disk.
This is nonsense. I installed from an OEM disk yesterday. The Windows OEM & retail installation disks are barely any different.
Note that Microsoft maintain that legally, as per the EULA, you can't buy an OEM version yourself & install it, and also that the license sticker's key may only ever be used on the PC it was originally stuck to. Here in Europe they suffered a court defeat on that latter point - you certainly need a separate license key for each computer but it maybe transferrable if you uninstall from the original PC. Nevertheless, Microsoft still insist to anyone who pays them attention that this condition holds, and indeed your jurisdiction may vary.
Unfortunately, this makes it frustrating to argue with anyone who maintains that you can't use an OEM disk (but nevertheless OEM disks DO work - I have used them on multiple occasions).
Stroller

Resizing Boot Camp Partition

Is it possible to dynamically reduce the size of my Boot Camp partition to allow room to increase my OS X partition. I really don't want to delete Boot Camp and then reinstall everything from XP to the applications so was hoping I can painlessly take 5GB out of it.

Backup both - WinClone for Windows, SuperDuper or Disk Utility Restore for OS X.
Head over to Paragon Software and download CampTune and read the directions.
For 5GB???
As for OS X, it has a fit if it doesn't have 10-20% free space, less than 10% and it can belly-up, loss of btree directory.
Sounds like time for hard drive swap actually.

Oracle 10 g OEM does not start after XP boot

Hallo!I am currently studying for the Oracle 10g Administration OCA
I installed Oracle 10 g on Windows XP but once I boot the OS and enter the OEM url on the browser,OEM does not load.
I am forced to go to the command prompt and manually start OEM via the command
emctl start dbconsole.
How can I configure my oracle to enable OEM to automatically start after booting the OS?
Thanks.

Hans Forbrich wrote:
user11114098 wrote:
During installation,the computer was connected to the internet via a modem that uses DHCP?So typical.
How do I resolve this issue?Microsoft Loopback Adapter. Force it to a static IP value, and enter that value in the hosts. table.
How?: Discussed more than a few times in these forums. Discussed in Microsoft forums. Discussed on internet.Also discussed in the Fine Installation Guide ... ;-)

Firefox 15 UI does not update after wake from sleep

On my Netbook running Windows XP 32-bit, if I leave Firefox open when I put the computer to sleep (by closing its lid), then when I wake it up from sleep, the user interface elements (like the tab bar) won't respond to mouse clicks. This does not happen 100% of the time; in particular it won't happen for a freshly restarted Firefox that is put to sleep, making the problem rather annoying to reproduce. As far as I can tell, I might have to visit some set of websites with Javascript or Flash or something.
Here are some more details about the user interface, because it is not as simple as non-responsiveness. When I wake it up, when I click on a tab to switch to it, the Windows title bar actually changes to display that tab's page title, but nothing else in the UI updates including the URL bar and the actual page displayed. Similarly for closing a tab; the tab remains, but the title bar shows the title of the tab that would receive focus next. After I "pseudo" close a tab and then restart Firefox, it does not remember that I closed the tab (I save sessions) and restarts with the same set of tabs before I tried to close one.
I get the problem even after disabling all extensions and resetting all toolbars to defaults. I have not tried to create a new profile because I have a lot invested in my current profile.

I am going to respond to my self and say I am nuts.
Canon does not seem to have any uninstaller for this scanner on their site:
http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=DownloadDet ailTabAct&fcategoryid=351&modelid=17104
Which is rather odd since they have installers. this is different from most of their other older scanners. But if you just plugged in our scanner and things worked in OSX, which it should have, then you should be OK.
However I can confirm that others see this issue (like my dad) and here is the official Canon response to the issue:
+Dear XXXX:+
+In some cases, coming out of sleep mode may not properly reinitialize+
+the USB bus on Macintosh Operating Systems. Unfortunately, the only+
+work around when this happens is to restart the computer.+
Of course this in not exactly true as logging out and back in fixes it.

Firefox window sometimes does not redraw after I close a tab

This started a while ago and has persisted through multiple updates of Firefox and my display drivers. It's straightforward: sometimes when I close a tab (via keyboard or mouse) Firefox does not redraw its window and I am left looking at a "ghost" version of the tab.
If I move my mouse over the window I can see it responding to links in the tab that Firefox has switched to, but the display will not update until I do something to trigger the browser to redraw its whole window (e.g. resizing it).
I am using Firefox 36 beta and have a GTX 560 Ti graphics card with the latest Nvidia drivers. As I mentioned above though, this issue has been around for a while and is not specific to the version of Firefox (I don't normally use betas) or drivers I am currently using. I don't have problems in any other program.
Has anyone else experienced this?

You can try to disable OMTC and leave hardware acceleration in Firefox enabled.
*about:config page: layers.offmainthreadcomposition.enabled = false
You can open the about:config page via the location/address bar.
You can accept the warning and click "I'll be careful" to continue.
*http://kb.mozillazine.org/about:config
Start Firefox in [[Safe Mode|Safe Mode]] to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
See also:
*https://support.mozilla.org/kb/upgrade-graphics-drivers-use-hardware-acceleration

Outlook 2010 SP1 Profile Does Not Update After Moving Mailbox Between Exchange 2010 SP2 Sites

I am working on a large mailbox migration from one AD site to another.
Exchange version at both sites:Exchange 2010 SP2
Two Mailbox Servers: MBX01 in site A / MBX02 in site B
(There is a DAG but keeping this simple)
Two CAS Arrays: CASA.domain.com / CASB.domain.com
The RPCClientAccessServer property is set accordingly. Where MBX01 is set to CASA.domain.com and MBX02 is set to CASB.domain.com
Clients:Outlook 2010 SP1
Scenario: I successfully move a mailbox from Site A to Site B. The Outlook client does not automatically update its server settings to point to the new cas array (CASB.domain.com) and continues to connect to the old CAS server (CASA.domain.com).
I have seen a few articles regarding this pointing to workarounds such as:
- repairing the outlook profile on the client
- delete the existing outlook profile
- run a script to update the prf file (re-cache's email at the client)
I am interested in knowing if anyone else has experienced this, what their solution was for a large migration and if any roll-ups or service packs have possibly fixed this problem.
I would also like to know if you have seen this affect ActiveSync devices. I am getting mixed results in my tests and thought it may be contributed toward different device types, mobile os versions, etc...
I have posted this to the Exchange 2010 forum as well, just wasn't sure where to start.
Thanks.
Mike

Hi,
Seems you got several replies in the thread below that you posted in Exchange forum:
http://social.technet.microsoft.com/Forums/exchange/en-US/68ae67c1-59f5-44bb-aadc-0aea3f72ad2d/outlook-profile-not-updated-to-new-cas-array-after-mailbox-move-between-sites?forum=exchange2010#68ae67c1-59f5-44bb-aadc-0aea3f72ad2d
Please come back to the thread above and check if the replies are helpful.
Since this issue is more related to Exchange, we can provide rarely assistance on this problem. If you need any help on Outlook client side, please don't hesitate to let me know.
I would appreciate it if you could post the solution here when you found it, so that other community members who have same question in this forum will benefit from it.
Best Regards,
Steve Fan
TechNet Community Support

Windowed CLOCK does not update correctly

My floating desktop clock [digital with date] is one hour earlier than it should be and will not update correctly on startup. The time shown is correct if I switch to the menubar version, as is the time in the time update slot on the Time & Date tab in Preferences. But the analog clock below the time update slot shows one hour earlier also. Am not sure how long this has been a problem since I haven't traveled to a different timezone in two months. At this stage in the lifecycle of Tiger, these kinds of petty annoyances should NOT be occurring as new issues.
14" iBook G4 Mac OS X (10.4.6) 768-Mb RAM

klimew,
Welcome to Apple Discussions.
Go to System Preferences>International>Formats>Times
and explore the Customize...features.
Since you are new to Apple Discussions, you may not
have noticed that there is a Tiger Forum. If my
suggestion is unproductive, you may want to repost
your question in the Tiger Forums: Finder, Dock & Dashboard.
;~)
Thanks for the info but the answer does not lie in International. It's a bug in my clock and apparently only for EDT for some cities, like New York NY (my closest city for the summer). When I switch to Ottawa Canada IN THE SAME TIME ZONE everything is OK. Weirdski.
14" iBook G4 Mac OS X (10.4.6) 768-Mb RAM

Hi I have subvi in subpanel does not update after opening

Hi I have a problem with subvi updating inside the subpanel, after opening.
I need your advice, I am using LabView 7.1.
I am asking for your opinion before I can post my code because it is very large and made of many files outside the folder.
Here's the description of my problem.
- In the main vi, it has an event structure to open 3 references of the files, based on the ring control, Not only that, it also has events for many controls.
- In each subvi, it also has an event structure ofr it's own controls to work inside
- After opening the subvi in the subpanel, the controls like strings, are not updated, till the main vi is minimised and maximised again. Then the controls are updated. Weird... But then other controls are unresponsive and in the end I aborted it.
Funny thing is that, when I stripped most of the parts, leaving the essential ones I wanted to focus and debug.
It seems working and no problem.
How am I going to troubleshoot? I don't have any faintest idea as to how to find the cause of trouble?
Clement

astroboy wrote:
Funny thing is that, when I stripped most of the parts, leaving the essential ones I wanted to focus and debug.
It seems working and no problem.
The only think i can think of, strip the parts one by one ... when it works, probably you will have find the prolem (the last stripped).

Firefox does not update after downloading updates on restart. How to fix?

For quite some time now I receive the auto-notification that an update is ready to download. I proceed with the download and restart Firefox, yet the browser never updates. How do I fix this short of doing manual downloads every time?
MacBook Pro Mac OS 10.6 FF v 10.0

Thanks for your reply, Matt. I already read the knowledge base article, and it doesn't specifically address my issue. The update IS being downloaded, yet it is not updating the FF app - even on restart. As I indicated in my initial question, I've been experiencing this for the last year. To finally upgrade to v.10.0 I had to download a fresh copy of FF. Now, again, for the last two updates that I've been notified on - 10.1 and 10.2 I've followed the same procedure - allowed the downloads, did the restart and NO UPDATE to the app.

Windows 7 Freezes at Restart After Installing Boot Camp Drivers

Hi,
I have a MacBook Pro and am having troubles installing 32-Bit Windows 7. All seems to be functional until I install the Boot Camp drivers included on the Install Disk. I have tried using the Boot Camp 3.1 update, but the same problem occurs. After the computer freezes on the install page, I can no longer access Windows (even in Safe Mode) and am forced to restart the entire process (that is, repartition the hard drive and reinstall Windows).
If I don't install the Boot Camp drivers, Windows seems to be functional, so I'm pretty sure it's something in the Boot Camp package causing the trouble.
Is anyone else having this problem? Any ideas or workarounds?

I finally got it to work. You need to go to the NVidia website and install their drivers. I think the Apple supplied ones are out of date and are causing Windows to hang. Install Boot Camp from the supplied DVD, install the update that Apple supplies through the newly installed Boot Camp, and then go to the NVidia website to manually download the drivers. I used the GeForce 300M series installer. Make sure you do all of this before letting Windows restart.
I had a few issues with it hanging a few times, but once I was able to get into Windows it seems to be working. All of the other Apple supplied drivers seem to work.

Windows disc does not update after resizing boot camp partition

Similar Messages

Maybe you are looking for