Windows does not boot on new motherboard

Hi everybody.
I am lost here.
I made an upgrade to my PC: replace motherboard, CPU and RAM. Keep everything else.
I went from a celeron400 w/ intel chipset to 865 neo-2 PFISR.
The BIOS run fine. I can boot on CDs. But windows refuses to boot from c:. It looks like the MBR is fine, because I get the screen that says: "windows failed styarting, how do you want to start, fail safe mode or normal mode?" From here, any option I choose reboots the PC very quick.
I think the problem is that the geometry (CHS) of my disk is wrong. But I don't manage to find the correct values.
Does anyone has any idea of what is going wrong?
- The hard drive is a 15GB IBM DTLA 703015 (desktar 75GXP)
- I don't want to format everything....
- The drive still works on other computers.
Additionnal question: any link to installation of Windows XP pro on a SATA disk?
Thank you for any idea you might have!

In bios under Integrated Peripherals, On Chip ATA Operating Mode set
Native Mode
ATA Configuration - PATA only
SATA Keep enabled - yes
PATA Keep enabled - yes
PATA channel selection - both
You can't boot using a hard drive with windows installed on a different motherboard. There are too many differences to be successful.
Connect the SATA drive to SATA1, don't connect any PATA drives, and use the settings above. After you install Windows you can connect up the PATA drives (if any) to use for data.

Similar Messages

T60p does not boot from new primary hard disk (Single-boot Linux/Fedora 14)

Hi,
I have just upgraded the primary disk in my T60p laptop (model 8742-C4G.) The BIOS recognised the disk fine, I partitioned it, marked the first partition as bootable, and then copied the OS (Fedora 14) and all my data back onto it. Then I installed the GRUB bootloader using the following commands:
grub> root (hd0,0)
grub> find /grub/stage1
grub> setup (hd0)
grub> quit
I've also tried installing GRUB with "setup (hd0,0)" instead of "setup (hd0)", without success.
This ran fine, exactly like with all the other PCs I've successfully performed this procedure on in the past. However, this laptop is refusing to boot from the new disk. There's no sign of any activity, either - just a flashing cursor in the top-left corner of the otherwise blank LCD panel. So I'm guessing that either the bootloader is failing immediately, or the laptop isn't executing the bootloader at all.
The laptop is running the very latest v1.18 BIOS, and there are no beeps, POST errors or anything like that. My previous disk booted into Fedora 14 without any difficulty at all, of course.
Can anyone suggest why the T60p is not booting, please? And also how to fix it? Is there any extra initialisation that I need to do in the BIOS, for example? (I haven't seen any...) The disk *does* appear in the BIOS's list of bootable media. Or maybe there's some special code that needs to be written into the MBR that GRUB doesn't know about?
The disk is a 320 GB 7200rpm Western Digital drive, and the Lenovo/IBM salesperson assured me that it was fully compatible with a T60p laptop without the need for any extra firmware.
Thanks in advance for any ideas, because I'm completely stumped at this point.
Cheers,
Chris
N.B. This is a Linux laptop, and so Windows-centric suggestions aren't going to help me.

You said you can't get into Windows safe mode, have you installed Windows on the hard drive? Are you able to get into the BIOS for the controller?
If you aren't able to access the BIOS for the controller, it may be due to bad RAM. If you are comfortable installing RAM and you have some extra laptop RAM of the same type (I think it's DDR3 for your controller) laying around, you can try swapping out the RAM.
Was your hard drive damaged through some event, or did it just stop working?
AC - LV Solver

Satellite Pro L300 - Windows does not boot up

Silly person that i am, and being computer illiterate i turned off my laptop while it was downloading updates.
Now, when i turn it on it gives a black screen with 2 options for startup.
1 for start in repair/restore mode,
1 for start windows normally but neither work.
I made the recovery discs after i purchased the laptop but i am wary about using it.
Though i dont do a lot of work that needs backing up, i only surf the net and do emails.
Are there any other safer options for starting up?

Hi
If you have no important data on the HDD then you can use the Recovery disk in order to reinstall the OS again and to set up the unit back to factory settings.
The recovery disk will format the HDD and will erase everything from the HDD.
The installation procedure does not take a long time you need to boot from Recovery disk and have to follow the instruction on the screen. Thats all!
Greets

Pxie 8108 does not boot with new hard disk

Hi
I'm currently using PXIe 8108 with PXIe-1062Q.
The previous hard disk was borken so I had to install a new hard disk.
The new hard disk is fommatted as NTFS format, and it is currently mounted on 8108.
Unfortunately I don't have recovery disk avaialble so I'm trying to install Windows 7 on empty hard disk.
When you boot, the PWK OK LED light is on all the time, DRIVE orange LED is on for few seconds only when I turn the switch on.
Labview RT switches are all off, I cleared CMOS many times from the board but, the screen shows nothing.
I have tried use my DVI monitor with other device as well, and it worked so there is no problem with the monitor.
In addition, I tried to go to window safe mode by pressing F8 or Del it didn't work, so I see nothing on the screen when its booted up.
I tried to put as much information I can it will be very appreciated if you can help me with this issue please.

You said you can't get into Windows safe mode, have you installed Windows on the hard drive? Are you able to get into the BIOS for the controller?
If you aren't able to access the BIOS for the controller, it may be due to bad RAM. If you are comfortable installing RAM and you have some extra laptop RAM of the same type (I think it's DDR3 for your controller) laying around, you can try swapping out the RAM.
Was your hard drive damaged through some event, or did it just stop working?
AC - LV Solver

Windows does not recognize ipod whatsoever

This is so frustrating.
I just bought a new ipod video after giving up on my old ipod.
Windows does not recognize the new ipod at all, not even as an extra drive. I'm tried uninstalling and reinstalling everything, restoring the ipod, connecting to different ports. No such luck. I've read up on the past posts concerning this problem with no luck.
Can anyone help me?

here's a bit here's what microsotft says:
To resolve this problem, delete the UpperFilters registry value and the LowerFilters registry value. These values may cause access problems. To do this, follow these steps: 1. Click Start, click Run, type regedit , and then click OK.
2. Locate and then click the UpperFilters registry value. This value is located in the following registry subkey:
HKEYLOCALMACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E980-E325 11CE-BFC1-08002BE10318}
3. On the Edit menu, click Delete, and then click OK.
4. Locate and then click the LowerFilters registry value. This value is located in the following registry subkey:
HKEYLOCALMACHINE\SYSTEM\CurrentControlSet\Control\Class\4D36E967-E325-11CE-BFC1-08002BE10 318}
5. On the Edit menu, click Delete, and then click OK.
6. Exit Registry Editor.
7. Restart the computer.
it worked perfectly for me!make sure to follow the directions. it's easy and resolves many Windows XP problems related to ipods. for more info try microsoft help and support and just serch for ipod. it list a bit more info there. it doesn't say anything about reinstalling the apple software, but just to be thorough i unistalled itunes and quicktime before anything just to start with a clean slate, then reinstalled them from my ipod disk after the restart. then i downloaded all the updates from apple. my ipod has never worked better. good luck. theres no link to the page just search for ipod in windows help and support for exact wording

Windows Server 2008 R2 Does not boot When Back up drive removed

I have a windows Server 2008 R2 Standard server RAID 10 installed. I have a non raid drive installed as the backup HD. The Backup drive is now failing. When I went to switch it with a new one the system does not boot and is asking for
a boot drive. I have been searching for solutions and cannot find any. Any ideas?

Hi,
Could you confirm if your boot volume is on that non-RAID disk (maybe 2 volumes on that disk and one of them is the boot volume)?
At current situation, first please test to connect the failed disk back to the device and see if it will help.
Or you may need to run a boot-up repair with an installation disk.
If you have any feedback on our support, please send to [email protected]

New MBP i5 does not boot after hard disk swap

Hi there,
I received my new i5 MBP today. After booting it once with the installed HDD to check if it's ok, I exchanged the hard disk for the one in my Late 2008 Macbook Pro. After doing this, my Late 2008 Macbook Pro boots fine with the (new) hard disk from the new i5 MBP, but the i5 MBP does not boot with my old hard disk.
To give you some details:
- I have installed 10.6.3 on the (old) hard disk that's not booting.
- The i5 MBP boots fine from the installation DVD
- Disk utility finds and can read my hard disk, no errors
- PRAM NVRAM reset did not help
- when booting in safe mode, I can see the system stop booting after or while loading Extensions.mkext
My guess is, it tries to boot and load the wrong Extensions for the new system (CPU? GPU?). I have no idea how to fix this.
Any help would be greatly appreciated!

Focx,
Welcome to Apple Discussions.
Inserting the drive from an earlier model MBP will probably not work. The version of the system you have on that HD is designed for earlier hardware so when you put in in your new machine it's going to be recognized. What I'd recommend is re-installing the disk that came with the new machine and of course putting the 2008's disk back in the old machine. Then use Migration Assistant on the new machine and migrate your data from the old machine into the new machine.
This will provide a much more stable system and should work just fine.
Regards,
Roger

Clicking the scroll wheel does not open a new firefox window

I'm running Windows 7 x64 SP1. I use the scroll wheel to click items in the task bar to open another instance of those items. Eg I scroll-click a Firefox or Excel or Explorer or whatever item in the taskbar, and it opens another instance of that program. I use this feature to open a new instance of FireFox rather than switching to the FF window, then using control-n to open a new window.
I just upgraded to FireFox 6 from FF4.x. Since doing so, scroll-clicking the FF item in the taskbar does not open a new FF window. It does, well, nothing.
I installed FF6 on a clean Win7 x86 (RTM) build in a VM. When I use the scroll-click feature in the taskbar, it works as expected: it opens a new FF window.
Things I have tried: A different mouse; updating video drivers (I doubted this would make a difference, but it needed to be done anyway, so I thought I'd mention it); running FF in safe mode (ie with all plugins etc disabled).
I'm doing a little experimentation right now with respect to x86/x64, RTM/SP1, clean FF6/upgrade from 4.x and other differences that might highlight why it works as expected in my VM but not on my physical machine.
I'm curious to know if anyone else has experienced this problem since upgrading to FF6.
Max

Respectfully, that answer isn't particularly helpful. I have already demonstrated that middle-clicking (mouse wheel click) will open a new instance of FF, and other programs. This was true before the upgrade from FF4 to FF6, and is true on all my VM builds (Windows 7 default install with nothing but FF installed).
Nevertheless, I've tried shift-left-click, and it does not open a new instance. It will only open a new instance if I pin FF to the taskbar, which I have already stated I do not want to do. This new behaviour is unique to FF. Other applications (Word, Excel, Internet Explorer, whatever) all behave as expected. It is only Firefox that is misbehaving, and it is only misbehaving since the upgrade.
My issue is that FF has changed its behaviour with respect to middle-clicking since upgrading from 4 to 6. I'd welcome helpful comments about getting FF to behave.
Max

X102e - Hard drive does not boot into Windows

Hi, I was trying to reinstall Windows on my X120e.
I tried clean install with Windows 7 Professional, but the hard drive does not boot into the Windows once it has done the first phase of the install(you know, the copying part)
After the restart done by Windows, it goes as far as "Starting Windows" but does not actually boot into the Windows.
When I try to install Windows with another HDD, the device works well, but I can't swap the HDD because it is not 7.5mm think HDD.
Is there any possibility the HDD will work trough any software-level process? The HDD works fine as external HDD when tested with external HDD adapter, and installs well. only problem is that it fails to boot
Kim
W540( ), Helix(Sold), Tablet 2(Sold) Tablet 2( ), X120e(Sold), X201 Tablet, X41 Tablet(Sold), X41, X32*4, 701C*4

Thank you for reply.
This is not exactly the issue. I was talking about the HDD originally installed in the PC.
The PC successfully recognizes the external disk I used to install the Windows, but the problem was that I did not boot into the "First boot" screen, which basically works on the already installed data.
As of now I have installed an SSD and is working fine. strange part is that HDD works just fine when I use it as an external HDD via adapter. Strange huh?
Kim
W540( ), Helix(Sold), Tablet 2(Sold) Tablet 2( ), X120e(Sold), X201 Tablet, X41 Tablet(Sold), X41, X32*4, 701C*4

New system does not boot properly

I just set up a new system with:
a MS-6728 Neo2 FIS2R Mobo,
1gb Geil PC-3500 RAM (2x512),
2.6C proc.
2 Maxtor 120gb IDE drives RAID 0 with the onboard promise controller.
Lite-On DVD burner
ATI radeon 9800 video card
Enermax 300 watt power supply with:
3.3v - 28amp
5v - 30amp
12v 22amp
170watt total 3.3/5 combined
My problem is that my system NEVER boots up normally. It always freezes in the bios startup. The D-bracket stops at almost every possible combination of led's, which according to the manual the problems were: Testing RTC, Initialize Video interface, Testing memory, Initializing floppy controller, Memory detection, Decompressing bios to ram, possibly more. Sometimes I also just get beeping, either a continuous beep or 8 beeps. A few times it would display the bios startup screen, but halfway down would be gibberish characters and would be locked up. When I then turn the computer off then on again, the bios is reset at least somewhat(i know because I usually disable the full screen image on startup) and says memory timings are too tight, and I have the choice to enter bios or hit any key to automatically fix things. If I hit any key it will boot up ok. However when I restart/turn off the computer, the next time it again does not boot. I tried upping the ram voltages from 2.5-2.9v, and that seems to stay that way in the bios, even when it resets itself. Everything else is set to auto/slow. If I try to manually adjust the memory timings, even to the slowest possible settings, it does not boot, and I must turn it on/off a few times till the bios resets again, with the boot process stopping at one of the possiblilitys mentioned above. Using the info tab on speedfan, I got the memory info, and it displayed the voltage at 2.5v, not sure what that means but it is strange.
What I have already attempted:
I sent back the ram and got a new set, which hasn't changed anything. The first time the other ram failed memtest, this time it passed(for about 2 hrs). So I don't think its the ram.
I borrowed an antec truepower 430w powersupply, which had no effect.
I went back to bios version 1.3 from 1.9, which also seems to have no effect.
I was hoping to overclock the system a bit and enable performance mode etc etc, but now I'll be happy to just not have to go through a song and dance everytime I restart the computer. This is only the second computer I have built from scratch, and the first with raid, but that seemed to all go ok. Please help me diagnose the problem!

I too am having problems with my system.
865PE Neo2-FIS2R
2 Maxtor 120GB S-ATA drives, RAID 0, Promise
2 512MB Geil Ultra CL2-3-3-6
HP CD-RW
What IDE settings are you using?
E.g...Native? P-ATA Only...all of those settings
For me...sometimes XP will install and boot...but eventually system is unstable and XP crashes and corrupts itself...Event Manager errors different each time
Someone mentioned problems with Maxtor and AMI BIOS...anything I should keep in mind?
Sorry about all the different questions. I'm sure exactly where my problem lies. MSI thinks it may be my memory AND/OR on-board IDE controller since I can't get the on-board Intel RAID setup to consistently "see" and setup my RAID drives...even when it has worked...XP doesn't like the Intel configured RAID drives. Also tried just one S-ATA drive through on-board Intel and Promise. Next I will try a plain old IDE Hard Drive...no S-ATA...and make sure my memory passes memtest86+ testing.
Any other gems you can offer for this config??? Thanks.

HT201209 The buy button in itunes does not open a new window and allow me to buy a purchase

Hello
We are having problems with iTunes. We have redeemed a voucher which does appear £25 but we can not Buy a purchase. The new window does not open like it used to.
We can not download the free singles either.
This has been happening for 2 weeks.
Any help would be much appreciated.
Thanks

Middle-click or click the scroll-wheel on a hyperlink has always opened a '''new Tab'''. Any chance you had an add-on that changed that action, and now that add-on is disabled or incompatible?

I cannot open a new tab - when I restart firefox (or my computer), ctrl T does not work, and the "+" tab next to the single tab on my browser window does NOT open a second tab

Firefox3.6.18, running on WinXP (all the Microsoft patches), opens with a single tab. Clicking the Add Tab "+" or pressing CTRL T does not open a new tab, although I can open a new window. Also, when exiting from Firefox, my tab location is not saved.

Please disable or uninstall the Ask toolbar extension to solve your problem. It has a known incompatibility with Firefox. See [[Uninstalling add-ons]].

New Message, reply, or forward window does not open in Outlook for Mac 2011

New Message, reply, or forward window does not open in Outlook for Mac 2011
Outlook acts as if I am pressing a dummy button.

Hi friends,
I have the same problem.
Mountain Lion + Office 2011 + Safari 6.1.2 (8537.74.9)
It is not clear to me what is the relation between Safari and this problem.
I have Chrome installed as well and it is set as default browser. Is this involved?
If yes how can I solve the problem?
Please let me know.
Many thanks.
Best regards
Peval

The wheel click button does not open a new window since the latest update (9.0.1)

Hi
I just want to report this bug in hope it will be fixed asap
The wheel click button does not open a new window since the latest update (9.0.1)
Thank you

Middle-click or click the scroll-wheel on a hyperlink has always opened a '''new Tab'''. Any chance you had an add-on that changed that action, and now that add-on is disabled or incompatible?

Command click in Yosemite does not open a new window

Command click in Yosemite does not open a new window. ??

Is the checkbox in this screenshot checked for your Finder preferences. If so uncheck it and try again.

Windows does not boot on new motherboard

Similar Messages

Maybe you are looking for