Windows does not detect Base Station
Hello,
I have a Laptop on XP that will not detect a base station. I have run AirPort assistant and Administrative Assistant, but it will not show up? How do I get it to detect the base unit on AirPort Express?
Thanks
Fujitsu & iMac Windows XP Fujitsu N Series
It will say that if you are not connected to a network.
Your laptop should be able to see the wireless network even if it is not connected to it from the wireless icon in the system tray.
iFelix
Similar Messages
-
Airport utility does not support base station? Help!
I cannot get base station light to turn green. Blinking amber. I upgraded to a new Verizon modem and since then the base station does not work. What can I do?
Make sure the new Verizon Modem is not also a WiFi Router, if it is then that may be your issue. If it is indeed just a Modem then your Ethernet Connection should work and your base station should be working. You said "Airport Utility does not support base station". Don't know what you meant by that. Do you have an Airport Extreme, Airport Express or a Airport TC as a Base Station? If yes, you should be able to set up your Network via Airport Utility. If the Verizon Modem is only a Modem then unplug the power from your Airport Base Station, then unplug the Power from your Verizon Modem for at least 1-minute. Plug the Modem back in and give it a moment or so, then make sure you do have an Ethernet cable going from your Verizon provided Modem to your WAN port on your Airport Base Station. Now power up your Airport Base Station and go to your Airport Utility. Find the Base Station and click on Edit... Make sure your Network Name is correct, your Password is Correct, your Security method is correct (example: WPA2 Personal). If all correct see if your blinking Amber light is now Solid Green.
-
Thinkpad Edge S430 - Windows does not detect external display connected via HDMI
On a Thinkpad S430 with HD4000 integrated graphics, an external display connected via a HDMI cable is not detected at all when using Windows. The system is fully updated as of the time of posting this message, both via the Lenovo Update tool as well as Windows update.
The Intel driver version is 8.15.10.2696. It appears that this is the latest version, since it does not offer an update when I try to auto-update it via Device Manager.
NB: I am running Ubuntu 12.04 with kernel 3.4.0 on the same machine, and the external display works perfectly fine with this software configuration.
Hence I think that it's very likely that this is a Windows-specific driver issue.
Would Lenovo happen to have a driver update in the works? Alternatively, I will be thankful for any suggestions about possible resolution of this problem.skn2011 wrote:
My Macbook Pro notbook 13.3" does not detect external display throught it's mini display port to HDMI connector when connected to Sony Bravia 32" LCD TV.Can anyone help me get the answer as i tried reading everywhere on internet and none does not seems to work.Please help me out guys.
Are you using the Apple adaptor or a 3rd party -
Airport Utility does not see Base Station but I'm still online
I have an original airport base station and just downloaded Airport Utility 5.5.1
The base station is working because I'm online with it posting this thread.
But Airport Utility 5.5.1 does NOT see it...
The strange thing is that I have one of the early dome Airport Extremes here as well. That one IS recognized but the Airport Utility.
Anyone have any suggestions as to why the original Airport is not showing up in the utility even when I know it's obviously being seen by my card and connecting to the web?
Thanks
gDid you power cycle your network as follows?
Power everything on the network down, order is not important
Wait a few minutes, then start the modem first and let it run a few moments by itself.
Then start the next device connected to the modem and let it run a few moments.
Then start each device the same way until everything is up on the network. -
Airport Utility does not see base station
Hello,
I just got an Airport Extreme. I am able to connect to it from mac and pc running vista but I am not able to see the base station from the airport utility on the windows platform. I can see it from the mac. Any ideas why - am I missing something on the windows platform.
Thanks
PraveenThanks for your answers. I found this answer in a different thread. Once I unchecked CheckPoint VPN software - the base stations now show up in Airport Utility.
Re: iTunes 7 for Windows Vista: AirTunes won't connect to remote speakers
Posted: Jun 25, 2007 6:06 AM in response to: Vanlew Reply Email
I had same frustrating problem.
I was able finally to restore AirTunes.
In Local Area Connection Status.Properties
In the "uses the following Items" list,
Item "Check Point SecuRemote" appears.
This is the VPN CLient that was installed to let me log in to my office network from home.
Uncheck SecuRemote, OK; iTunes Speakers button shows.
Check SecuRemote, OK; iTunes Speakers button disappears.
This looks like a bug in Checkpoint Software.
In your case, something else may be interferring.
Other OS Vista 32 bit - SecuRemote beta for Vista -
Airport utility does not recognize base station
My airport utility (5.5.3) does not recognize my base station or express after changing internet providers (moved to ATTUverse). I know the network works (recognized by wireless devices). Everytime I do a "rescan" nothing appears. Running OS 10.72 on Core 2 Duo iMac; all software up-to-date; restarted all devices. Help
It sounds like you may have an older version of the AirPort Express.
Please look on the side of the device in the faint print to locate the model number. It will start with an "A" followed by four numbers......as in A x x x x.
If you could post back with that information, we will know more about how to answer your question. -
Airport Management Utility on new MacBook Pro does not see base station
I have an old "flying saucer" Airport base station. I
recently started using a new MacBook Pro. Airport
connection is fine, Airport Admin Utility works normally,
but Airport Client Monitor 1.0 shows blank graphs and
Airport Management Utility 1.0 does not "see" the
base station. I don't know if the problem is the
change to Tiger, to Intel, or to AE card. MacStumbler
and friends also are "blind".
MacBook Pro Core 2 Duo Mac OS X (10.4.8)Try rebooting the airport, then going to airport utilities and go thru the set up proceedure following the prompts. Also go to system prefernces in location select automatic.
-
Airport Extreme utility does not see base station.
The utility doesn't see the base station, yet I can connect and surf the internet. I have noticed that the light is flashing yellow, but I don't know how to stop it or turn it to green. I am using XP.
If you have wireless turned on and you do not have security enabled, it will flash amber. You can over ride the flashing amber in the utility, or if you are hardwired, just turn the wireless function off.
-
AirPort Utility does not support base station
"This version of AirPort Utility doesn’t support this base station. Go to AirPort Service and Support for more information." What?
Support for any older, 802.11b-g only AirPort Base Stations is gone in Mavericks.
The last of them has been discontinued for over six years. -
Windows does not detect my sound card
Hello, I have a thinkcentre m58p dt. I had to reinstall windows(same version which was already installed before) but since I did it integratedsound behaves a strange way. Windows detects it and it appears in the device windows menu. I can use headphones but I can’t use the speaker like I used to do. Windows says the device is not connected.
Spinedoc,
This problem may be caused by the USB ports on your system not providing the required amount of power at device start. There are a few ways to get around this problem:
) Make sure that you have all of your motherboard, chipset, and USB updates available for your system installed.
2) Go into Device Manager/Uni'versal Serial Bus Controllers and double click on one of your USB root hubs (or USB 2.0 root hub). Go to the power management tab and take the checkmark out of the top option that says to allow Windows to disable power to the device. Repeat this for all the root hubs.
3) If none of the others work, then you will want to try the card on another system, or with a powered USB hub to ensure that there is no problem with the sound device itself. If it works on another system then you will want to try it with a powered USB hub on the system in question.
Jeremy -
Just got a second hand iPhone 4s and tried to connect to iTunes on laptop running windows 8.1 does not detect iPhone, iPad or iPod. Can any help please? iPhone is version 7.1 and running latest itunes
Hello HungryHoover,
It sounds like you are not able to see any iOS devices in iTunes on your PC. I recommend the following article to help you troubleshoot that named:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Thank you for using Apple Support Communities.
Regards,
Sterling -
Windows detects nano but iTunes does NOT detect even aftr doing all steps
my windows detects nano but iTunes does NOT detect even after doing all the steps described in the site. Any help ??? please ....
I did all the steps described in the article in Apple site at iPod appears in Windows Explorer but does not appear in iTunes http://docs.info.apple.com/article.html?artnum=93716
-
Probook 4520s does not detect external monitor on Windows 8.1
I have problem, when I connect my laptop on external monitor LG Flatron W 2240. Laptop does not detect. I make conection with VGA cable (cable checked and it works). I try to reinstall my grphic driver, but it does'nt help. I use graphic driver for Windows 7 Professional 64 bit. I had Windows 8 and the external monitor worked fine, but now I have only black screen on monitor LG.
@Rebeca1986
Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP -
HP x720w 64GB Pen Driver Does not detect on Windows 7 Laptop
HP x720w 64GB Pen Driver Does not detect on Windows 7 Laptop. While it detects on my PC. Same OS. Pls advise.
I will have to wait until a Moderator inspects your image and makes it viewable.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer -
my sony vaio laptop with windows 7 ultimate OS does not detect my iphone thru itunes 11.1.0.126. Any suggestions how to fix this?
windows 8 has been out long enough to have fixed this issue you would think Its bad enough my last computer hard drive went out and i lost all on it but now i cant backup my phone so if I lose it or something happens to it Ill be in bad shape lol PLEASE fix this issue!!! Too much info to store on Icloud but could be apples way of getting people to use the icloud and buy extra storage on icloud
Maybe you are looking for
-
I've downloaded Dreamweaver CC, but it won't launch. The icon bounces and then that's it. I've uninstalled, reinstalled and I get the same result. Any ideas?
-
Can anyone tell me how to scan documents to the icloud, so they will be on the ipad? My husband is planning on using his ipad for business. I haven't been able to even find anywhere that I could read about scanning documents.
-
I'm new and want to find out how to start.
I have tried everything I could think of.....not clicking. I am trying to convert a Judicial Council Form Online form to PDF in order to save it. However, Adobe requests I search my files to convert to PDF. The Online form won't allow me to save to
-
Problem generating RoboHelp AIR file
Hi: I installed the RoboHelp Packager for Air to work with my Adobe RoboHelp 7 on Windows XP Professional. I get a "WebHelp folder could not be copied" message after I click the "Generate" button in the AIR wizard. It does show me the progress bar wi
-
Quick way to create Lower thirds from Spreadsheet
Maybe everyone knows this already since it came out when I was away from the forums, but I searched the Premiere Pro forums for the word "spreadsheet" and got no related results, so here goes.... There is a way to type all of your information for low