Windows does not recognize iPhone

Hi
After I upgraded my iPhone to iOS8 it won't recognized by pc ( windows 7 , 64 bit ) as portable device . I did every thing to resolve that like update iTunes , update diver , delete some photos , restart pc and iPhone , using troubleshoot , check usb cable , removing programs which I recently installed , check usb port but the problem does not resolved . iTunes recognize iPhone but not pc . I try another pc and there wasn't any problem on that pc . Please tell me what can I do ?
thanks

So just for reference, the problem has been solved. I don't know what changed, but tonight when I connected my phone, Windows tried to run the "found new hardware wizard." I can't explain why. I hadn't changed any settings since last night when I connected and reconnected my phone at least a dozen times. The only thing I did between then and now was shut down.
Anyhow, when the Wizard started, I remembered a tip I had found here several months ago when I was having a similar problem with my iPod. I directed Windows to search for drivers in C:\WINDOWS\inf. The wizard found whatever it needed in that directory and now my PC recognizes my iPhone as a camera.
Can't explain what changed, but go figure. Thank you Windows for being as inscrutable as ever.

Similar Messages

Windows does not recognize iPhone 5S as device

Hallo,
For the past two weeks, my Windows 7 does not recognize my iPhone 5S as a device. This means I cannot download any media content captured with the device.
I have already followed the instructions posted on several Apple community topics re this issue, specifically the ones on checking the Universal Serial Bus Controllers. When connecting the phone, the Apple USB driver does show as a bus controller. I've checked for updates, and it shows that I have the latest version and that the bus controller functions correctly. The phone is also picked up by iTunes, although iTunes doesn't not start automatically like before. I'm using an Apple cable. Still, the device is not picked up by Windows.
Can anyone help, please?

Did you check all of the steps in this support document iOS: Device not recognized in iTunes for Windows especially the ones about the Apple USB driver installation? Did you try removing and reinstalling iTunes as suggested and outlined in this support document? Make sure you follow those steps exactly. Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8

Iphone 3gs is not charging nor detected by i tunes and computer shows 'One of the USB devices attached to this computer has malfunctioned and windows does not recognize it'

Hello evi one .. My iphone 3gs is not charging and is not recognised by itunes .whenever i attach my iphone to my computer,it displays a message 'one of the USB devices attached to this computer has malfunctioned and windows does not recognize it ' . :-( it do charging sometime with charger but does'nt by computer . kindly please tell me the solution .. thanks

As I said above, some of the new lightning cables have been known to be causing problems for some users. Have it replaced if at all possible by bringing it into your local Apple Store's Genius Bar.
B-rock

When i attach my iphone 4 with computer it shows one of the USB devices attached to this computer has malfunctioned and windows does not recognize it,now what can i do ..plz help me

when i attach my iphone 4 with computer it shows one of the USB devices attached to this computer has malfunctioned and windows does not recognize it,now what can i do ..plz help me

I would first try unplugging All the USB devices plugged into your computer, and then plug back in just the iPhone and see if that is recognized. Also, do you have the latest version of iTunes for Windows installed on your PC, as you need to?
Hope this helps

TS1538 I have 6th gen iPod nano. When I try to sync it my computer tells me it has malfunctioned and Windows does not recognize it. My iPhone syncs fine so the problem must be the iPod. I have reset the iPod several times and no luck. Any suggestions

. I have 6th gen iPod nano. When I try to sync it my computer tells me it has malfunctioned and Windows does not recognize it. My iPhone syncs fine so the problem must be the iPod. I have reset the iPod several times and no luck. Any suggestions?

Hello Alexdad,
We've an article that can help get your iPod Nano working with your computer.
iPod nano: Error message saying that iPod 'could not be identified properly'
http://support.apple.com/kb/TS3218
Cheers,
Allen

When I connect my Iphone 5 to my computer to tranfer pictures my computer says USB device attached to the computer has malfunctioned and Windows does not recognize it. What do I do??

I do not understand why my computer is telling me that my new iphone 5 has malfunctioned and Windows does not recognize it when I plug it in the computer.
I have tried several times and gotten the same message. Any suggestions?
thanks

Make sure you can see your device in the sidebar>>
Open Itunes on your computer
Click View
_Click View Sidebar
Then Try EXPANDING all sections in the following article, pressing CTRL>p, printing it all out and following the instructions step by step. Use the instructions that apply to your computer's Operating System, but don't skip any steps.
http://support.apple.com/kb/TS1538
You are installing the Apple Mobile Device USB driver, which I did not have to do previously, so something in the updates has been left out / or changed.

TS1500 Windows does not recognize the iPhone as existing, though iTunes can see it.

Windows does not recognize the iPhone as existing, though iTunes can see it.

I found a webpage where a user reported the same issue as me.
He said he determined that "foreign pictures" -- meaning any pictures not taken using the iPhone's camera -- were the cause. Once he deleted the "foreign pictures" -- such as pictures obtained from receiving texts from others which included pictures that he saved onto the iPhone, then iTunes worked.
In my case, the fix was to upgrade the iPhone's OS from 5.1.1 to the latest version.
Now, both issues are solved:
Windows recognizes the iPhone as a storage device.
iTunes can see pictures that I've saved on the iPhone.

After installingwindow 8.1 preview, itune does not recognize iphone

After IO update and and installing window 8.1 preview, Itune does not recognize iphone.
I went to devise manager and it tells me everything is working properly, but can not read the iphone on itune.
Please help with this problem
Thanks
TOM

You shouldn't be running the "preview" anymore. Microsoft released the full 8.1 update last Friday (10/18).
The "preview" is a beta and should NOT be relied on for any further use. Microsoft explained this in their "preview" downloads.
http://windows.microsoft.com/en-us/windows-8/update-from-preview

Windows does not recognize ipod nano

i cannot get windows (or itunes) to recongize my ipod nano. once in connect the ipod, i get the 'do not disconnect' message indefinately. it used to work. it reinstalled itunes, reset my ipod, etc. any suggestions?

thanks, but the troubleshooter assumes windows is recognizing the ipod. in my case it is not. i download itune 7.0 just in case. same problem exists. in fact, since windows does not recognize the ipod, itunes eventually freezes up.

Windows does not recognize ipod whatsoever

This is so frustrating.
I just bought a new ipod video after giving up on my old ipod.
Windows does not recognize the new ipod at all, not even as an extra drive. I'm tried uninstalling and reinstalling everything, restoring the ipod, connecting to different ports. No such luck. I've read up on the past posts concerning this problem with no luck.
Can anyone help me?

here's a bit here's what microsotft says:
To resolve this problem, delete the UpperFilters registry value and the LowerFilters registry value. These values may cause access problems. To do this, follow these steps: 1. Click Start, click Run, type regedit , and then click OK.
2. Locate and then click the UpperFilters registry value. This value is located in the following registry subkey:
HKEYLOCALMACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E980-E325 11CE-BFC1-08002BE10318}
3. On the Edit menu, click Delete, and then click OK.
4. Locate and then click the LowerFilters registry value. This value is located in the following registry subkey:
HKEYLOCALMACHINE\SYSTEM\CurrentControlSet\Control\Class\4D36E967-E325-11CE-BFC1-08002BE10 318}
5. On the Edit menu, click Delete, and then click OK.
6. Exit Registry Editor.
7. Restart the computer.
it worked perfectly for me!make sure to follow the directions. it's easy and resolves many Windows XP problems related to ipods. for more info try microsoft help and support and just serch for ipod. it list a bit more info there. it doesn't say anything about reinstalling the apple software, but just to be thorough i unistalled itunes and quicktime before anything just to start with a clean slate, then reinstalled them from my ipod disk after the restart. then i downloaded all the updates from apple. my ipod has never worked better. good luck. theres no link to the page just search for ipod in windows help and support for exact wording

Cant Charge/connect ipod touch. Get an error saying "One of the USB devices attached to your computer has malfunctioned, and Windows does not recognize it" . HELP.

Ok . so my ipod touch 2G , used to be all ok . its just yesterday i went to charge my ipod it wouldnt do anything . Then after being plugged in for a bit , i got pop up saying " "One of the USB devices attached to your computer has malfunctioned, and Windows does not recognize it" .
Ive tried plugging this into 3 other computers same error message pops up .
PLEASE help me . thanks (:

Uninstall your USB drivers in your computer & reinstall.
contact your pc manufacturer for the steps.
Although I am working on behalf of HP, I am speaking for myself and not for HP.
Love Kudos! If you feel my post has helped you please click the White Kudos! Star just below my name : )
If you feel my answer has fixed your problem please click 'Mark As Solution' and make it easier for others to find help quickly : )
Happy Troubleshooting : )

USB device (1 day old nano) has malfunctioned & windows does not recognize

Please can someone help a non-tech savy new ipod user. I have loaded the latest itunes, but not only does itunes not see my ipod, I get the following windows error when I plug it in. "One of the USB devices attached to this computer has malfunctioned and windows does not recognize it". It says no drivers are loaded for this device. I have followed the 5Rs including the windows updates with no luck. If anyone can help I would really appreciate it.
Thanks
sampsona

You listed as having an IBM r40. If I'm not mistaken, that's a laptop. The usb ports on many laptops aren't USB 2.0 or are low power ones. This can cause problems with a nano being able to charge.
One thing to try is to get a wall adapter to charge the nano separately, then connect to your computer for syncing only. You can find adapters locally and through Apple Store. http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?mco=C39 415D1&nclm=iPodPower
You can also try buying a POWERED usb hub. Make sure it has it's own power source so that its ports have enough charge to support the nano.
Custom PC & iMac (DV Special Edition), iPod Nano 1st, iPod Click Wheel Windows XP Pro Work in a variety of PC and Mac environments

Windows says "device is not functioning" and "Windows does not recognize"

I lost my USB dock connector cable for my ipod. I just went out today and bought a brand new "Cygnett GrooveLink Strech Retractable USB Cable for iPod". I was pumped when I came home to finally be able to add music to my ipod again, but alas when I plug the iPod in, Windows pops up saying that the device is not functional and that Windows does not recognize it. I tried everything from rebooting the iPod to re-downloading iTunes and iPod updater. After searching this site for the past few hours, I figured I'd try and possibly find some real answers here. Please Help!!

Hey everyone,
I had the same problems all of you are having. I
just got a 5th generation video ipod. For a few
days, my computer a) wouldn't recognize it; b) froze
up when I connected it; c) mistook it for a mass
storage device ("drive E"). I bought a USB 2.0
notebook card which didn't work either and actually
seemed to make the problem worse because when I
connected the iPod to it my computer froze up.
I was very confused because my new iPod worked on my
brother's computer--which is much older than mine but
still recognized the iPod and connected to it.
Then I noticed that my brother's computer is running
an older version of the ipod software. I used his
disk to install "Ipod Updater 2005-06-26" rather than
the new version of the software on the Apple Web
site. Then I plugged my iPod into a USB 1.1 port.
To my surprise, my computer finally recognized the
iPod and is now loading music onto it. I cannot
believe this worked. I wonder if the latest version
of the software is faulty in some way.
Try it! I hope it will work for you too. You will
need an older version of the iPod updater software,
so borrow it from a friend with an older ipod.
I am having this problem also...It will work fine on the 1.1 but when i plug it into the 2.0 it has trouble recognizing it...

One of the usb devices attached to your computer has malfunctioned, and windows does not recognize i

I am a damsel in distress. Every time I turn on my printer, I get ths message: "One of the USB devices attatched to your computer has malfunctionedand windows does not recognize it: . All was fine until I put in new ink today. I had not used the printer for about ten days prior to this. I went through the HP line of troubleshooting but nothing has worked. I have Windows 7 64 bit
Thank you
Katt

Uninstall your USB drivers in your computer & reinstall.
contact your pc manufacturer for the steps.
Although I am working on behalf of HP, I am speaking for myself and not for HP.
Love Kudos! If you feel my post has helped you please click the White Kudos! Star just below my name : )
If you feel my answer has fixed your problem please click 'Mark As Solution' and make it easier for others to find help quickly : )
Happy Troubleshooting : )

I have a ipod nano 1st and 2nd generation and am trying to put music on it but every time windows says one of the usb devices attached to this computer has malufunctioned and windows does not recognize it code 43 can someone help me please

i have a ipod nano 1st and 2nd generation and am trying to put music on it but every time windows says one of the usb devices attached to this computer has malufunctioned and windows does not recognize it code 43 can someone help me please

Try putting it into "Disk Mode" http://docs.info.apple.com/article.html?artnum=93651
Then with it in this mode connect it to the PC and try to run the latest iPod updater to do a restore and update software if you have the option. the latest iPod updater is 2006-03-23 and can be downloaded here http://www.apple.com/ipod/download/

Windows does not recognize iPhone

Similar Messages

Maybe you are looking for