Windows doesn't start after system recovery

I am using Presario 5180CF and my desktop has required system restore for several times with increased frequency for the past month so I decided to do a system recovery to return the computer back to its factory conditions. I managed to complete the process. However, after shutting down the computer, I couldn't start windows and it kept returning to the start up screen (with the HP/compaq logo) after loading. After 2 times, I was prompted to do a system restore but the process could never finish and it always hang after the "windows is loading files' bar has finished, sometimes it shows a blue screen. I attempted to do a system recovery again but the same thing happens. Would anyone be able to help me with this or is it time to buy a new desktop? Thanks in advance for your help!

Test the hard drive then the memory modules, post back the results.
Start at the Second Post
 http://h30434.www3.hp.com/t5/Notebook-Lockups-Freezes-Hangs/How-to-test-RAM-and-HDD-Hard-Drive/td-p/...

Similar Messages

  • Windows don't start after System restore

    Hi. I have a Pavilion dv7 6195-US bought 3 years ago. 
    I have 2 HDD x 500GB.
    There was also a partition with the system restore to factory OS, but I don't remember what I've done and didn't recognized by HP Recovery Manager, anyway, the information is safe...I mean "base.wim".
    For some reasons, I had to formatted and reinstall the windows.
    I backup all my information from my laptop. INCLUDING the image factory: base.wim and the I try to reinstall my windows.
    For this point I found 2 ways on the internet: 
    1: there are 6 steps ( http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/Another-System-Restore-question... ) but instead of connecting my hard to another PC, I use the second of my HDD to install a random win7 and to do the 6 steps. I do the exact what is there, BUT after the step 6 and restart my laptop... basically it's stop at the point with "starting Windows and Logo"... If I remember for the first time when I opened, it supose to appear a welcome screen after that...but nothing... just freeze image. 
    Anyway, I don't know WHY or WHAT I got wrong... I try another way:
    2: Here is the stept that i follow but even here nothing happend ( http://forums.whirlpool.net.au/archive/2243985 )
    Please help me out how to figure out a way to restore my factory windows on a formatted HDD.
    There is no problem with my base.wim, I restore it ok with image.exe.... but the only problem is after the restart of my laptop and basicaly start windows for the first time... doesn't work.
    Maybe is because of my partition type or what? Can anyone give me some clear ways to do that.
    Thanks a lot !
    Later edit: I don't remember wich of this 2 ways I try, but after restart seems to work until a grey background appear, ans a cmd start with "startnet.cmd"...then a text 2 seconds, but then restart... and that's it... seems like a problem of restoring windows to factory?

    Hi @Starhitect ,
    Welcome to the HP Forums!
    It is a terrific place to find answers and tips!
    For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
    I grasp you are trying to recover your notebook back to factory.
    Following the steps in the first link at Step 6 it states after reinstalling the drive to boot to a Windows CD and do a repair.  Did you do that step?
    I suggest you contact HP support and inquire about obtaining a recovery kit for your notebook and then do the recovery from them.
    Please call our technical support at 800 474 6836. If you live outside the US/Canada Region, please click the link below to get a support number for your region.
    World Wide Phone Support
    Here is a link to assist you with that process. Performing an HP system recovery (Windows 7)
    Good Luck!
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • [SOLVED] Exaile doesn't start after system update

    Hi,
    After last system update Exaile won't start I've searched forum and web and can't find solution for that.
    [lukasz@myhost ~]$ exaile
    Traceback (most recent call last):
    File "/usr/lib/exaile/exaile.py", line 32, in <module>
    import gobject
    ImportError: No module named gobject
    As You can see it says something about gobject.
    BTW. After update I also hav problems with catalyst from AUR, my Gnome wasn't starting so I had to replace it with opensource ATI drivers,
    another problem is that everytime I startup gnome it's uing very small fonts, and I have to manually change it to one I had before.
    Please help,
    Regards,
    Lukasz
    Last edited by skraburski (2009-05-31 11:18:25)

    Problem solved, had to reinstall pygobject. It looks like after last update many pacakges were corrupted and now Ia have to reinstall them, do You know any way to automatically reinstall all corrupted packages?
    Regards,
    Lukasz

  • Lion Recovery doesn't start after selecting Recovery HD at startup

    Hi there
    I start my iMac (Core 2 Duo, clean install of Snow Leopard and then clean upgrade to Lion and then migration assistant from my Time Machine)
    I press Option key
    I select Recovery HD
    and then... nothing
    My computer just shows the circle that its thinking and then after a while, the computer shuts down.
    I really need this to work because I not only am going to need recovery in the future, I also would like to start over and restore from Time Machine instead of migration assistant.
    Appreciate any help or thoughts

    Hi
    I also have two USB disks and one PGP disk, could that be the problem?
    It shows:
    /dev/disk0
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:      GUID_partition_scheme                        *500.1 GB   disk0
       1:                        EFI                         209.7 MB   disk0s1
       2:                  Apple_HFS Mac HD                  499.2 GB   disk0s2
       3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
    /dev/disk1
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:      GUID_partition_scheme                        *1.0 TB     disk1
       1:                        EFI                         209.7 MB   disk1s1
       2:                  Apple_HFS                         999.9 GB   disk1s2
    /dev/disk2
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:      GUID_partition_scheme                        *1.0 TB     disk2
       1:                        EFI                         209.7 MB   disk2s1
       2:                  Apple_HFS Lacie                   999.9 GB   disk2s2
    /dev/disk3
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:     Apple_partition_scheme                        *9.0 GB     disk3
       1:        Apple_partition_map                         32.3 KB    disk3s1
       2:                 Apple_HFSX robin.blomquist         9.0 GB     disk3s2

  • Windows 8.1 doesn't start after update. BLACK SCREEN AFTER LOGIN

     Before all, sorry my english, I'm brazilian and don't found the solution on the brazilian version of HP website.
     After I did the updates, the system ask to restart the notebook, so I did it. And now, when I do the login, after the password page, the Windows doesn't starts. Just a Black Screen appears.
      I can't open the right side window to acces the configurations, and this laptop doesn't have a battery to take out and put in again.
     I had already restore the system.
     So, I use my laptop to work, and it has only 4 days of use.
     I need help! Thanks!

    Hi,
    Run through the following procedure.
    Boot the computer normally and log-in.
    At the black screen, hold down the ctrl and alt keys and press delete.
    Select Task Manager.
    Click on File and select Run new task.
    Type cmd.exe - also enter a tick in the box for 'Create this task with administrative privileges' - and click Ok.
    Type in the following command ( including spaces ) and hit enter.
    Dism /Online /Cleanup-Image /RestoreHealth
    This will take a while to complete, but when it’s finished, restart the notebook.
    If the screen is still black after you log-in, once again, hold down the ctrl and alt keys and press delete.
    Select Task Manager.
    Click on File and select Run new task.
    Type cmd.exe - also enter a tick in the box for 'Create this task with administrative privileges' - and click Ok.
    Type in the following command ( there's a space between sfc and the / ) and hit enter.
    Sfc /scannow
    When the scan has finished, check that the result is ‘No integrity violations’, then type exit and hit enter.
    Restart the notebook again.
    Any change?
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Windows 7 64-bit 8GB RAM doesn't start after installing X-Fi drivers

    I have Windows 7 64 bit, 8GB RAM for a few months. After inserting an X-Fi Platinum Fatalty Champion Series (S/N MASB046A83R0772D; OP BN 06SB046A00005 Rev A) and installing Creative Sound Blaster X-Fi series driver 2.8.003 dated 26 Jun 09. The sounds plays OK, but after rebooting Windows doesn't start, with a CorruptRegistry error. I have installed Windows from scratch, but it only works until I install the X-Fi driver and reboot. Please help. I have searched the internet and found no solution to my problem besides a Wikipedia article that X-Fi has problem with 64-bit Vista with 4GB RAM or more.

    Hi, I am also running windows 7 ultimate 64 with the same sound card and am using the july 5 driver. It works but i cant use the creative control panel as i get a black screen on start-up and when i uninstall the contol panel windows functions normally. I may have to go with the onboard sound to get all 4 speakers to work. I have 6 Gb of ram on a gigabyte X58 Mobo.

  • Installing software is happen and reboot nearly one day after system recovery.

    HP installing software is happen and reboot nearly one day after system recovery.
    I have done the  recovery for my lap
    1)After recovery done system get reboot and hp software installation menu has came.
    2)HP software get installed , and then rebooot.
    3)This HP software installation menu is come and reboot the pc and again it come. it doesn't finish
    this is running more than 24 hrs.
    4)please guide to resolve the issue.
    System Model:  HP Pavilion dv5 Notebook PC
    Operating system: Windows Vista Home Premium
    Please use the link to download the video of my problem, which used understand the issue:
    https://www.dropbox.com/s/bf7e08lmdrn32t1/HPSoftwareInstall-1.rar
    https://www.dropbox.com/s/4k4rug8pvs3w6qu/HPSoftwareInstall-2.rar

     
    Satellite C75D-A7370
    ordered recovery media from Toshiba and installed it.  ....  I tried to call Toshiba support, but because I am outside my warranty, I was told I would be charged for support. 
    It is running Windows 8..even though it is supposed to be on 8.1 (according to the sticker on the bottom of the laptop).  
    The product key is buried in the hardware.
    According to the spec above, the original model shipped with Windows 8 and needed to be upgraded. My guess is that they later shipped the same model with Windows 8.1.
    It appears Toshiba shipped the wrong recovery media.
    Explain that when you call.

  • [SOLVED] Xorg doesn't start after upgrade to 1.17.1

    Archlinux i686
    Intel Core 2 Duo 6600
    01:00.0 VGA compatible controller: NVIDIA Corporation G71 [GeForce 7900 GT/GTO] (rev a1)
    After following upgrades:
    [2015-02-26 03:27] [PACMAN] Running 'pacman -S mesa mesa-demos mesa-libgl'
    [2015-02-26 03:27] [ALPM] transaction started
    [2015-02-26 03:28] [ALPM] upgraded mesa (10.4.2-1 -> 10.4.5-1)
    [2015-02-26 03:28] [ALPM] upgraded mesa-libgl (10.4.2-1 -> 10.4.5-1)
    [2015-02-26 03:28] [ALPM] upgraded mesa-demos (8.2.0-3 -> 8.2.0-4)
    [2015-02-26 03:28] [ALPM] transaction completed
    [2015-02-26 03:28] [PACMAN] Running 'pacman -S xorg-server xorg-server-common'
    [2015-02-26 03:29] [ALPM] transaction started
    [2015-02-26 03:29] [ALPM] removed xf86-video-vesa (2.3.2-5)
    [2015-02-26 03:29] [ALPM] removed xf86-video-nouveau (1.0.11-2)
    [2015-02-26 03:29] [ALPM] removed xf86-video-modesetting (0.9.0-2)
    [2015-02-26 03:29] [ALPM] upgraded xorg-server-common (1.16.3-2 -> 1.17.1-3)
    [2015-02-26 03:29] [ALPM] upgraded xorg-server (1.16.3-2 -> 1.17.1-3)
    Xorg doesn't start after reboot and I found following kernel message:
    kernel: [drm:drm_mmap_locked] *ERROR* Could not find map
    and /var/log/Xorg.0.log looks like this:
    [ 5.591]
    X.Org X Server 1.17.1
    Release Date: 2015-02-10
    [ 5.591] X Protocol Version 11, Revision 0
    [ 5.591] Build Operating System: Linux 3.18.6-1-ARCH i686
    [ 5.591] Current Operating System: Linux emeria7 3.18.6-1-ARCH #1 SMP PREEMPT Sat Feb 7 08:59:29 CET 2015 i686
    [ 5.591] Kernel command line: root=/dev/disk/by-label/archroot rw
    [ 5.591] Build Date: 22 February 2015 12:52:47PM
    [ 5.591]
    [ 5.592] Current version of pixman: 0.32.6
    [ 5.592] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 5.592] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 5.592] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Feb 26 14:58:35 2015
    [ 5.597] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 5.597] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    [ 5.598] (==) ServerLayout "ServerLayout0"
    [ 5.598] (==) No screen section available. Using defaults.
    [ 5.598] (**) |-->Screen "Default Screen Section" (0)
    [ 5.598] (**) | |-->Monitor "<default monitor>"
    [ 5.599] (==) No device specified for screen "Default Screen Section".
    Using the first device section listed.
    [ 5.599] (**) | |-->Device "Device0"
    [ 5.599] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 5.599] (**) Option "BlankTime" "0"
    [ 5.599] (**) Option "StandbyTime" "0"
    [ 5.599] (**) Option "SuspendTime" "0"
    [ 5.599] (**) Option "OffTime" "0"
    [ 5.599] (==) Automatically adding devices
    [ 5.599] (==) Automatically enabling devices
    [ 5.599] (==) Automatically adding GPU devices
    [ 5.608] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/OTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/
    [ 5.608] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 5.608] (**) Extension "Composite" is disabled
    [ 5.608] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 5.608] (II) Loader magic: 0x829e700
    [ 5.608] (II) Module ABI versions:
    [ 5.608] X.Org ANSI C Emulation: 0.4
    [ 5.608] X.Org Video Driver: 19.0
    [ 5.608] X.Org XInput driver : 21.0
    [ 5.608] X.Org Server Extension : 9.0
    [ 5.611] (EE) systemd-logind: failed to get session: PID 995 does not belong to any known session
    [ 5.611] (II) xfree86: Adding drm device (/dev/dri/card0)
    [ 5.612] (--) PCI:*(0:1:0:0) 10de:0291:107d:2a62 rev 161, Mem @ 0xfd000000/16777216, 0xc0000000/268435456, 0xfc000000/16777216, I/O @ 0x0000ac00/128, BIOS @ 0x????????/131072
    [ 5.612] (II) Open ACPI successful (/var/run/acpid.socket)
    [ 5.613] (II) LoadModule: "glx"
    [ 5.616] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 5.632] (II) Module glx: vendor="X.Org Foundation"
    [ 5.632] compiled for 1.17.1, module version = 1.0.0
    [ 5.632] ABI class: X.Org Server Extension, version 9.0
    [ 5.632] (==) AIGLX enabled
    [ 5.632] (==) Matched nouveau as autoconfigured driver 0
    [ 5.632] (==) Matched nv as autoconfigured driver 1
    [ 5.632] (==) Matched nouveau as autoconfigured driver 2
    [ 5.632] (==) Matched nv as autoconfigured driver 3
    [ 5.632] (==) Matched modesetting as autoconfigured driver 4
    [ 5.632] (==) Matched fbdev as autoconfigured driver 5
    [ 5.632] (==) Matched vesa as autoconfigured driver 6
    [ 5.632] (==) Assigned the driver to the xf86ConfigLayout
    [ 5.632] (II) LoadModule: "nouveau"
    [ 5.632] (WW) Warning, couldn't open module nouveau
    [ 5.632] (II) UnloadModule: "nouveau"
    [ 5.632] (II) Unloading nouveau
    [ 5.632] (EE) Failed to load module "nouveau" (module does not exist, 0)
    [ 5.633] (II) LoadModule: "nv"
    [ 5.633] (WW) Warning, couldn't open module nv
    [ 5.633] (II) UnloadModule: "nv"
    [ 5.633] (II) Unloading nv
    [ 5.633] (EE) Failed to load module "nv" (module does not exist, 0)
    [ 5.633] (II) LoadModule: "modesetting"
    [ 5.633] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
    [ 5.634] (II) Module modesetting: vendor="X.Org Foundation"
    [ 5.634] compiled for 1.17.1, module version = 1.17.1
    [ 5.634] Module class: X.Org Video Driver
    [ 5.634] ABI class: X.Org Video Driver, version 19.0
    [ 5.634] (II) LoadModule: "fbdev"
    [ 5.634] (WW) Warning, couldn't open module fbdev
    [ 5.634] (II) UnloadModule: "fbdev"
    [ 5.634] (II) Unloading fbdev
    [ 5.634] (EE) Failed to load module "fbdev" (module does not exist, 0)
    [ 5.634] (II) LoadModule: "vesa"
    [ 5.634] (WW) Warning, couldn't open module vesa
    [ 5.634] (II) UnloadModule: "vesa"
    [ 5.634] (II) Unloading vesa
    [ 5.634] (EE) Failed to load module "vesa" (module does not exist, 0)
    [ 5.634] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
    [ 5.634] (++) using VT number 7
    [ 5.635] (II) modeset(0): using drv /dev/dri/card0
    [ 5.635] (II) modeset(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 5.636] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
    [ 5.636] (==) modeset(0): RGB weight 888
    [ 5.636] (==) modeset(0): Default visual is TrueColor
    [ 5.636] (II) Loading sub module "glamoregl"
    [ 5.636] (II) LoadModule: "glamoregl"
    [ 5.636] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
    [ 5.647] (II) Module glamoregl: vendor="X.Org Foundation"
    [ 5.647] compiled for 1.17.1, module version = 1.0.0
    [ 5.647] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 5.647] (II) glamor: OpenGL accelerated X.org driver based.
    [ 5.772] (II) glamor: EGL version 1.4 (DRI2):
    [ 5.786] (II) modeset(0): glamor initialized
    [ 5.786] (II) Loading sub module "dri2"
    [ 5.786] (II) LoadModule: "dri2"
    [ 5.786] (II) Module "dri2" already built-in
    [ 5.843] (II) modeset(0): Output DVI-0 has no monitor section
    [ 5.896] (II) modeset(0): Output DVI-1 has no monitor section
    [ 5.950] (II) modeset(0): Output TV-0 has no monitor section
    [ 6.006] (II) modeset(0): EDID for output DVI-0
    [ 6.006] (II) modeset(0): Manufacturer: SAM Model: 76f Serial#: 1110590261
    [ 6.006] (II) modeset(0): Year: 2011 Week: 8
    [ 6.006] (II) modeset(0): EDID Version: 1.3
    [ 6.006] (II) modeset(0): Digital Display Input
    [ 6.006] (II) modeset(0): Max Image Size [cm]: horiz.: 51 vert.: 29
    [ 6.006] (II) modeset(0): Gamma: 2.20
    [ 6.006] (II) modeset(0): DPMS capabilities: Off
    [ 6.006] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    [ 6.006] (II) modeset(0): First detailed timing is preferred mode
    [ 6.006] (II) modeset(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
    [ 6.006] (II) modeset(0): blueX: 0.150 blueY: 0.060 whiteX: 0.312 whiteY: 0.329
    [ 6.006] (II) modeset(0): Supported established timings:
    [ 6.006] (II) modeset(0): 720x400@70Hz
    [ 6.006] (II) modeset(0): 640x480@60Hz
    [ 6.006] (II) modeset(0): 640x480@67Hz
    [ 6.006] (II) modeset(0): 640x480@72Hz
    [ 6.006] (II) modeset(0): 640x480@75Hz
    [ 6.006] (II) modeset(0): 800x600@56Hz
    [ 6.006] (II) modeset(0): 800x600@60Hz
    [ 6.006] (II) modeset(0): 800x600@72Hz
    [ 6.006] (II) modeset(0): 800x600@75Hz
    [ 6.006] (II) modeset(0): 832x624@75Hz
    [ 6.006] (II) modeset(0): 1024x768@60Hz
    [ 6.006] (II) modeset(0): 1024x768@70Hz
    [ 6.006] (II) modeset(0): 1024x768@75Hz
    [ 6.006] (II) modeset(0): 1280x1024@75Hz
    [ 6.006] (II) modeset(0): 1152x864@75Hz
    [ 6.006] (II) modeset(0): Manufacturer's mask: 0
    [ 6.006] (II) modeset(0): Supported standard timings:
    [ 6.006] (II) modeset(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
    [ 6.006] (II) modeset(0): #1: hsize: 1280 vsize 800 refresh: 60 vid: 129
    [ 6.006] (II) modeset(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
    [ 6.006] (II) modeset(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    [ 6.006] (II) modeset(0): #4: hsize: 1440 vsize 900 refresh: 60 vid: 149
    [ 6.006] (II) modeset(0): #5: hsize: 1440 vsize 900 refresh: 75 vid: 3989
    [ 6.007] (II) modeset(0): #6: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
    [ 6.007] (II) modeset(0): #7: hsize: 1680 vsize 1050 refresh: 60 vid: 179
    [ 6.007] (II) modeset(0): Supported detailed timing:
    [ 6.007] (II) modeset(0): clock: 148.5 MHz Image Size: 509 x 286 mm
    [ 6.007] (II) modeset(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
    [ 6.007] (II) modeset(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
    [ 6.007] (II) modeset(0): Supported detailed timing:
    [ 6.007] (II) modeset(0): clock: 74.2 MHz Image Size: 509 x 286 mm
    [ 6.007] (II) modeset(0): h_active: 1280 h_sync: 1390 h_sync_end 1430 h_blank_end 1650 h_border: 0
    [ 6.007] (II) modeset(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
    [ 6.007] (II) modeset(0): Ranges: V min: 50 V max: 75 Hz, H min: 31 H max: 81 kHz, PixClock max 175 MHz
    [ 6.007] (II) modeset(0): Monitor name: SMBX2331
    [ 6.007] (II) modeset(0): Supported detailed timing:
    [ 6.007] (II) modeset(0): clock: 74.2 MHz Image Size: 509 x 286 mm
    [ 6.007] (II) modeset(0): h_active: 1920 h_sync: 2448 h_sync_end 2492 h_blank_end 2640 h_border: 0
    [ 6.007] (II) modeset(0): v_active: 540 v_sync: 542 v_sync_end 547 v_blanking: 562 v_border: 0
    [ 6.007] (II) modeset(0): Supported detailed timing:
    [ 6.007] (II) modeset(0): clock: 74.2 MHz Image Size: 509 x 286 mm
    [ 6.007] (II) modeset(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
    [ 6.007] (II) modeset(0): v_active: 540 v_sync: 542 v_sync_end 547 v_blanking: 562 v_border: 0
    [ 6.007] (II) modeset(0): Supported detailed timing:
    [ 6.007] (II) modeset(0): clock: 74.2 MHz Image Size: 509 x 286 mm
    [ 6.007] (II) modeset(0): h_active: 1280 h_sync: 1720 h_sync_end 1760 h_blank_end 1980 h_border: 0
    [ 6.007] (II) modeset(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
    [ 6.007] (II) modeset(0): Supported detailed timing:
    [ 6.007] (II) modeset(0): clock: 27.0 MHz Image Size: 509 x 286 mm
    [ 6.007] (II) modeset(0): h_active: 720 h_sync: 732 h_sync_end 796 h_blank_end 864 h_border: 0
    [ 6.007] (II) modeset(0): v_active: 576 v_sync: 581 v_sync_end 586 v_blanking: 625 v_border: 0
    [ 6.007] (II) modeset(0): Supported detailed timing:
    [ 6.007] (II) modeset(0): clock: 27.0 MHz Image Size: 509 x 286 mm
    [ 6.007] (II) modeset(0): h_active: 720 h_sync: 736 h_sync_end 798 h_blank_end 858 h_border: 0
    [ 6.007] (II) modeset(0): v_active: 480 v_sync: 489 v_sync_end 495 v_blanking: 525 v_border: 0
    [ 6.007] (II) modeset(0): Number of EDID sections to follow: 1
    [ 6.007] (II) modeset(0): EDID (in hex):
    [ 6.007] (II) modeset(0): 00ffffffffffff004c2d6f0735433242
    [ 6.007] (II) modeset(0): 0815010380331d782aee91a3544c9926
    [ 6.007] (II) modeset(0): 0f5054bfef80714f8100814081809500
    [ 6.007] (II) modeset(0): 950fa940b300023a801871382d40582c
    [ 6.007] (II) modeset(0): 4500fd1e1100001e011d007251d01e20
    [ 6.007] (II) modeset(0): 6e285500fd1e1100001e000000fd0032
    [ 6.007] (II) modeset(0): 4b1f5111000a202020202020000000fc
    [ 6.007] (II) modeset(0): 00534d4258323333310a2020202001ee
    [ 6.007] (II) modeset(0): 02031cf14890041f0514131203230907
    [ 6.007] (II) modeset(0): 078301000066030c00100080011d80d0
    [ 6.007] (II) modeset(0): 721c1620102c2580fd1e1100009e011d
    [ 6.007] (II) modeset(0): 8018711c1620582c2500fd1e1100009e
    [ 6.007] (II) modeset(0): 011d00bc52d01e20b8285540fd1e1100
    [ 6.007] (II) modeset(0): 001e8c0ad090204031200c405500fd1e
    [ 6.007] (II) modeset(0): 110000188c0ad08a20e02d10103e9600
    [ 6.007] (II) modeset(0): fd1e110000180000000000000000004c
    [ 6.007] (II) modeset(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
    [ 6.007] (II) modeset(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
    [ 6.007] (II) modeset(0): Printing probed modes for output DVI-0
    [ 6.007] (II) modeset(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
    [ 6.007] (II) modeset(0): Modeline "1920x1080"x50.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
    [ 6.007] (II) modeset(0): Modeline "1920x1080"x59.9 148.35 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.4 kHz e)
    [ 6.007] (II) modeset(0): Modeline "1600x1200"x65.0 175.50 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (81.2 kHz d)
    [ 6.007] (II) modeset(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
    [ 6.007] (II) modeset(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
    [ 6.007] (II) modeset(0): Modeline "1400x1050"x74.8 155.80 1400 1464 1784 1912 1050 1052 1064 1090 +hsync +vsync (81.5 kHz d)
    [ 6.007] (II) modeset(0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
    [ 6.007] (II) modeset(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [ 6.007] (II) modeset(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 6.007] (II) modeset(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
    [ 6.007] (II) modeset(0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
    [ 6.007] (II) modeset(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
    [ 6.007] (II) modeset(0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
    [ 6.007] (II) modeset(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
    [ 6.007] (II) modeset(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
    [ 6.007] (II) modeset(0): Modeline "1280x720"x50.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
    [ 6.007] (II) modeset(0): Modeline "1280x720"x59.9 74.18 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
    [ 6.007] (II) modeset(0): Modeline "1024x768"x75.0 170.24 1024 1108 1220 1416 768 768 770 801 doublescan -hsync +vsync (120.2 kHz d)
    [ 6.007] (II) modeset(0): Modeline "1024x768"x60.0 133.47 1024 1100 1212 1400 768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
    [ 6.007] (II) modeset(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
    [ 6.007] (II) modeset(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz d)
    [ 6.007] (II) modeset(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
    [ 6.007] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 6.008] (II) modeset(0): Modeline "960x720"x75.0 148.50 960 1032 1144 1320 720 720 722 750 doublescan -hsync +vsync (112.5 kHz d)
    [ 6.008] (II) modeset(0): Modeline "960x720"x60.0 117.00 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
    [ 6.008] (II) modeset(0): Modeline "928x696"x75.0 144.00 928 992 1104 1280 696 696 698 750 doublescan -hsync +vsync (112.5 kHz d)
    [ 6.008] (II) modeset(0): Modeline "928x696"x60.1 109.15 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
    [ 6.008] (II) modeset(0): Modeline "896x672"x75.0 130.50 896 944 1052 1228 672 672 674 708 doublescan -hsync +vsync (106.3 kHz d)
    [ 6.008] (II) modeset(0): Modeline "896x672"x60.0 102.40 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
    [ 6.008] (II) modeset(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
    [ 6.008] (II) modeset(0): Modeline "800x600"x75.0 101.25 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (93.8 kHz d)
    [ 6.008] (II) modeset(0): Modeline "800x600"x70.0 94.50 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (87.5 kHz d)
    [ 6.008] (II) modeset(0): Modeline "800x600"x65.0 87.75 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (81.2 kHz d)
    [ 6.008] (II) modeset(0): Modeline "800x600"x60.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
    [ 6.008] (II) modeset(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
    [ 6.008] (II) modeset(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
    [ 6.008] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 6.008] (II) modeset(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 6.008] (II) modeset(0): Modeline "720x576"x50.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
    [ 6.008] (II) modeset(0): Modeline "700x525"x74.8 77.90 700 732 892 956 525 526 532 545 doublescan +hsync +vsync (81.5 kHz d)
    [ 6.008] (II) modeset(0): Modeline "700x525"x60.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
    [ 6.008] (II) modeset(0): Modeline "720x480"x60.0 27.03 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
    [ 6.008] (II) modeset(0): Modeline "720x480"x59.9 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
    [ 6.008] (II) modeset(0): Modeline "640x512"x75.0 67.50 640 648 720 844 512 512 514 533 doublescan +hsync +vsync (80.0 kHz d)
    [ 6.008] (II) modeset(0): Modeline "640x512"x60.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
    [ 6.008] (II) modeset(0): Modeline "640x480"x60.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
    [ 6.008] (II) modeset(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
    [ 6.008] (II) modeset(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
    [ 6.008] (II) modeset(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz d)
    [ 6.008] (II) modeset(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz d)
    [ 6.008] (II) modeset(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
    [ 6.008] (II) modeset(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 6.008] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 6.008] (II) modeset(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
    [ 6.008] (II) modeset(0): Modeline "576x432"x75.0 54.00 576 608 672 800 432 432 434 450 doublescan +hsync +vsync (67.5 kHz d)
    [ 6.008] (II) modeset(0): Modeline "512x384"x75.0 39.38 512 520 568 656 384 384 386 400 doublescan +hsync +vsync (60.0 kHz d)
    [ 6.008] (II) modeset(0): Modeline "512x384"x70.1 37.50 512 524 592 664 384 385 388 403 doublescan -hsync -vsync (56.5 kHz d)
    [ 6.008] (II) modeset(0): Modeline "512x384"x60.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
    [ 6.008] (II) modeset(0): Modeline "416x312"x74.7 28.64 416 432 464 576 312 312 314 333 doublescan -hsync -vsync (49.7 kHz d)
    [ 6.008] (II) modeset(0): Modeline "400x300"x72.2 25.00 400 428 488 520 300 318 321 333 doublescan +hsync +vsync (48.1 kHz d)
    [ 6.008] (II) modeset(0): Modeline "400x300"x75.1 24.75 400 408 448 528 300 300 302 312 doublescan +hsync +vsync (46.9 kHz d)
    [ 6.008] (II) modeset(0): Modeline "400x300"x60.3 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
    [ 6.008] (II) modeset(0): Modeline "400x300"x56.3 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
    [ 6.008] (II) modeset(0): Modeline "320x240"x72.8 15.75 320 332 352 416 240 244 246 260 doublescan -hsync -vsync (37.9 kHz d)
    [ 6.008] (II) modeset(0): Modeline "320x240"x75.0 15.75 320 328 360 420 240 240 242 250 doublescan -hsync -vsync (37.5 kHz d)
    [ 6.008] (II) modeset(0): Modeline "320x240"x60.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
    [ 6.063] (II) modeset(0): EDID for output DVI-1
    [ 6.116] (II) modeset(0): EDID for output TV-0
    [ 6.116] (II) modeset(0): Output DVI-0 connected
    [ 6.116] (II) modeset(0): Output DVI-1 disconnected
    [ 6.116] (II) modeset(0): Output TV-0 disconnected
    [ 6.116] (II) modeset(0): Using exact sizes for initial modes
    [ 6.116] (II) modeset(0): Output DVI-0 using initial mode 1920x1080
    [ 6.116] (II) modeset(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 6.116] (==) modeset(0): DPI set to (96, 96)
    [ 6.116] (II) Loading sub module "fb"
    [ 6.116] (II) LoadModule: "fb"
    [ 6.117] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 6.118] (II) Module fb: vendor="X.Org Foundation"
    [ 6.118] compiled for 1.17.1, module version = 1.0.0
    [ 6.118] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 6.118] (==) Depth 24 pixmap format is 32 bpp
    [ 6.462] (==) modeset(0): Backing store disabled
    [ 6.462] (==) modeset(0): Silken mouse enabled
    [ 6.464] (II) modeset(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 6.535] (==) modeset(0): DPMS enabled
    [ 6.535] (WW) modeset(0): Option "EXANoComposite" is not used
    [ 6.535] (II) modeset(0): [DRI2] Setup complete
    [ 6.535] (II) modeset(0): [DRI2] DRI driver: nouveau
    [ 6.535] (II) modeset(0): [DRI2] VDPAU driver: nouveau
    [ 6.535] (--) RandR disabled
    [ 6.551] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    [ 6.551] (II) AIGLX: enabled GLX_ARB_create_context
    [ 6.551] (II) AIGLX: enabled GLX_ARB_create_context_profile
    [ 6.551] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
    [ 6.551] (II) AIGLX: enabled GLX_INTEL_swap_event
    [ 6.551] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    [ 6.551] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
    [ 6.551] (II) AIGLX: enabled GLX_ARB_fbconfig_float
    [ 6.551] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    [ 6.552] (II) AIGLX: Loaded and initialized nouveau
    [ 6.552] (II) GLX: Initialized DRI2 GL provider for screen 0
    [ 6.559] (II) modeset(0): Setting screen physical size to 507 x 285
    [ 6.741] (II) config/udev: Adding input device Power Button (/dev/input/event3)
    [ 6.741] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 6.741] (**) Power Button: Applying InputClass "Keyboard Defaults"
    [ 6.741] (II) LoadModule: "evdev"
    [ 6.741] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 6.744] (II) Module evdev: vendor="X.Org Foundation"
    [ 6.744] compiled for 1.16.2, module version = 2.9.1
    [ 6.744] Module class: X.Org XInput Driver
    [ 6.744] ABI class: X.Org XInput driver, version 21.0
    [ 6.744] (II) Using input driver 'evdev' for 'Power Button'
    [ 6.744] (**) Power Button: always reports core events
    [ 6.744] (**) evdev: Power Button: Device: "/dev/input/event3"
    [ 6.744] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 6.744] (--) evdev: Power Button: Found keys
    [ 6.744] (II) evdev: Power Button: Configuring as keyboard
    [ 6.744] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
    [ 6.744] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 6.744] (**) Option "xkb_rules" "evdev"
    [ 6.744] (**) Option "xkb_model" "pc104"
    [ 6.744] (**) Option "xkb_layout" "us"
    [ 6.744] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
    [ 6.780] (II) config/udev: Adding input device Power Button (/dev/input/event2)
    [ 6.780] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 6.780] (**) Power Button: Applying InputClass "Keyboard Defaults"
    [ 6.780] (II) Using input driver 'evdev' for 'Power Button'
    [ 6.780] (**) Power Button: always reports core events
    [ 6.780] (**) evdev: Power Button: Device: "/dev/input/event2"
    [ 6.780] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 6.780] (--) evdev: Power Button: Found keys
    [ 6.780] (II) evdev: Power Button: Configuring as keyboard
    [ 6.780] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event2"
    [ 6.780] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
    [ 6.780] (**) Option "xkb_rules" "evdev"
    [ 6.780] (**) Option "xkb_model" "pc104"
    [ 6.780] (**) Option "xkb_layout" "us"
    [ 6.780] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
    [ 6.781] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event4)
    [ 6.781] (II) No input driver specified, ignoring this device.
    [ 6.781] (II) This device may have been added with another device file.
    [ 6.782] (II) config/udev: Adding input device HDA Intel Line Out Side (/dev/input/event10)
    [ 6.782] (II) No input driver specified, ignoring this device.
    [ 6.782] (II) This device may have been added with another device file.
    [ 6.782] (II) config/udev: Adding input device HDA Intel Rear Mic (/dev/input/event5)
    [ 6.782] (II) No input driver specified, ignoring this device.
    [ 6.782] (II) This device may have been added with another device file.
    [ 6.782] (II) config/udev: Adding input device HDA Intel Line (/dev/input/event6)
    [ 6.782] (II) No input driver specified, ignoring this device.
    [ 6.782] (II) This device may have been added with another device file.
    [ 6.783] (II) config/udev: Adding input device HDA Intel Line Out Front (/dev/input/event7)
    [ 6.783] (II) No input driver specified, ignoring this device.
    [ 6.783] (II) This device may have been added with another device file.
    [ 6.783] (II) config/udev: Adding input device HDA Intel Line Out Surround (/dev/input/event8)
    [ 6.783] (II) No input driver specified, ignoring this device.
    [ 6.783] (II) This device may have been added with another device file.
    [ 6.783] (II) config/udev: Adding input device HDA Intel Line Out CLFE (/dev/input/event9)
    [ 6.783] (II) No input driver specified, ignoring this device.
    [ 6.783] (II) This device may have been added with another device file.
    [ 6.784] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/event1)
    [ 6.784] (**) Logitech USB-PS/2 Optical Mouse: Applying InputClass "evdev pointer catchall"
    [ 6.784] (II) Using input driver 'evdev' for 'Logitech USB-PS/2 Optical Mouse'
    [ 6.784] (**) Logitech USB-PS/2 Optical Mouse: always reports core events
    [ 6.784] (**) evdev: Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event1"
    [ 6.784] (--) evdev: Logitech USB-PS/2 Optical Mouse: Vendor 0x46d Product 0xc050
    [ 6.784] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found 12 mouse buttons
    [ 6.784] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s)
    [ 6.784] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found relative axes
    [ 6.784] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found x and y relative axes
    [ 6.784] (II) evdev: Logitech USB-PS/2 Optical Mouse: Configuring as mouse
    [ 6.784] (II) evdev: Logitech USB-PS/2 Optical Mouse: Adding scrollwheel support
    [ 6.784] (**) evdev: Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5
    [ 6.784] (**) evdev: Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 6.784] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1:1.0/0003:046D:C050.0001/input/input1/event1"
    [ 6.784] (II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE, id 8)
    [ 6.784] (II) evdev: Logitech USB-PS/2 Optical Mouse: initialized for relative axes.
    [ 6.784] (**) Logitech USB-PS/2 Optical Mouse: (accel) keeping acceleration scheme 1
    [ 6.784] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration profile 0
    [ 6.784] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration factor: 2.000
    [ 6.784] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration threshold: 4
    [ 6.785] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/mouse0)
    [ 6.785] (II) No input driver specified, ignoring this device.
    [ 6.785] (II) This device may have been added with another device file.
    [ 6.785] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 6.785] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 6.785] (**) AT Translated Set 2 keyboard: Applying InputClass "Keyboard Defaults"
    [ 6.785] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    [ 6.785] (**) AT Translated Set 2 keyboard: always reports core events
    [ 6.785] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [ 6.785] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
    [ 6.785] (--) evdev: AT Translated Set 2 keyboard: Found keys
    [ 6.785] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
    [ 6.785] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
    [ 6.785] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
    [ 6.785] (**) Option "xkb_rules" "evdev"
    [ 6.785] (**) Option "xkb_model" "pc104"
    [ 6.785] (**) Option "xkb_layout" "us"
    [ 6.785] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
    [ 6.803] (EE)
    [ 6.803] (EE) Backtrace:
    [ 6.803] (EE) 0: /usr/lib/xorg-server/Xorg (OsLookupColor+0x132) [0x81df9e2]
    [ 6.804] (EE) 1: ? (?+0x132) [0xb7787cc5]
    [ 6.804] (EE) 2: /usr/lib/xorg/modules/drivers/modesetting_drv.so (_init+0x4cd7) [0xb6e2a1c7]
    [ 6.806] (EE) 3: /usr/lib/xorg-server/Xorg (xf86_show_cursors+0x688) [0x80f9008]
    [ 6.806] (EE) 4: /usr/lib/xorg-server/Xorg (xf86DestroyCursorInfoRec+0xcf8) [0x8103fc8]
    [ 6.806] (EE) 5: /usr/lib/xorg-server/Xorg (RamDacHandleColormaps+0x67b) [0x810218b]
    [ 6.807] (EE) 6: /usr/lib/xorg-server/Xorg (miPointerUpdateSprite+0x25d) [0x81c648d]
    [ 6.808] (EE) 7: /usr/lib/xorg-server/Xorg (miPointerUpdateSprite+0x4c1) [0x81c6b31]
    [ 6.808] (EE) 8: /usr/lib/xorg-server/Xorg (CompositeRegisterImplicitRedirectionException+0x4199) [0x8114399]
    [ 6.809] (EE) 9: /usr/lib/xorg-server/Xorg (PanoramiXRenderReset+0x72a) [0x815915a]
    [ 6.810] (EE) 10: /usr/lib/xorg-server/Xorg (ConfineToShape+0x9f1) [0x80843b1]
    [ 6.810] (EE) 11: /usr/lib/xorg-server/Xorg (WindowHasNewCursor+0x3b) [0x8084f2b]
    [ 6.810] (EE) 12: /usr/lib/xorg-server/Xorg (ChangeWindowAttributes+0xb7c) [0x80aa9ec]
    [ 6.811] (EE) 13: /usr/lib/xorg-server/Xorg (ProcBadRequest+0x209) [0x8074a49]
    [ 6.811] (EE) 14: /usr/lib/xorg-server/Xorg (SendErrorToClient+0x3a6) [0x807abf6]
    [ 6.811] (EE) 15: /usr/lib/xorg-server/Xorg (remove_fs_handlers+0x42f) [0x807edaf]
    [ 6.811] (EE) 16: /usr/lib/xorg-server/Xorg (miPolyFillRect+0x27f) [0x8068ddf]
    [ 6.814] (EE) 17: /usr/lib/libc.so.6 (__libc_start_main+0xde) [0xb72d864e]
    [ 6.814] (EE) 18: /usr/lib/xorg-server/Xorg (_start+0x21) [0x8068bd9]
    [ 6.814] (EE)
    [ 6.814] (EE) Segmentation fault at address 0x0
    [ 6.814] (EE)
    Fatal server error:
    [ 6.814] (EE) Caught signal 11 (Segmentation fault). Server aborting
    [ 6.814] (EE)
    [ 6.814] (EE)
    Please consult the The X.Org Foundation support
    at http://wiki.x.org
    for help.
    [ 6.814] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
    [ 6.814] (EE)
    [ 6.815] (II) AIGLX: Suspending AIGLX clients for VT switch
    [ 6.817] (EE) Server terminated with error (1). Closing log file.
    Note the segfault in modesetting_drv.so!
    Any help?
    I tried to reinstall dependencies of xorg-server and mesa. And then I even went through with the whole system update which I postponed for a few weeks because of the KDE changes. Sadly even the whole system update didn't help.
    Is it possible that any old config files can cause this?
    EDIT:
    I tried kernel parameter "nouveau.modeset=0" but it didn't help.
    Last edited by cro (2015-02-26 16:33:19)

    Ok, I guess I solved it by reinstalling xf86-video-nouveau.
    Funny business! Why did the upgrade to xorg-server 1.17.1 force me to remove it when it is still needed??
    And why does that lead to mysterious error messages and segfault??
    I discovered it accidentally when I stumbled upon the fact that the package was still installed on my newer x86-64 Arch installation despite being on xorg-server 1.17.1.

  • DBConsole Service doesn't start after Install OAS F&R-Services Win 10g

    Windows DBConsole Service doesn't start after Install OAS F&R-Services
    Hello,
    we have installed:
    WINDOWS Server 2003 with SP 2
    Oracle 10.2.0.1
    OAS F&R Services 10.1.2.0.2
    after Install DBR2 EM / DBConsole did work
    after Install OAS F&R-Service
    the windows-service for DBConsole
    doesn't start, return with an Error Code 2
    see below
    the file named emdbconsole.nohup from output log
    is not to find
    the ias_console does work fine
    OAS F_R-Services do work too
    whats may be wrong ?
    regards
    Norbert
    OracleDBConsoleorclsrvc.log :
    EMDROOT=D:\oracle\product\10.2.0\db_1
    ORACLE_HOME=D:\oracle\product\10.2.0\db_1
    EMDSTATE=D:\oracle\product\10.2.0\db_1\kfin_orcl
    CONSOLE_CFG=dbconsole
    TRACE_LEVEL=16
    TIMEOUT=15
    12/14/09 13:13:08 Start pending...
    12/14/09 13:13:08 Verifying dbconsole is not started already. Command line "D:\oracle\product\10.2.0\db_1\bin\emctl.bat" istatus dbconsole
    12/14/09 13:13:09 dbconsole launch commandline is "D:\oracle\product\10.2.0\db_1\bin\emctl.bat" istart dbconsole
    12/14/09 13:13:09 Tracking process launch...
    12/14/09 13:13:39 dbconsole exited with retCode 2.
    12/14/09 13:13:39 Check D:\oracle\product\10.2.0\db_1\kfin_orcl\sysman\log\emdbconsole.nohup for details
    Edited by: astramare on Dec 15, 2009 8:43 AM

    Hi,
    1. Stop the DBConsole. (set ORACLE_SID first & ORACLE_HOME)
    cd %ORACLE_HOME%\bin
    emctl stop dbconsole
    2. Update the <ORACLE_HOME>/<hostname_sid>/sysman/config/emd.properties file.
    Change line from:
    tracelevel.main=WARN
    To
    tracelevel.main=DEBUG
    Decomment this line, so that the line becomes :
    EMAGENT_PERL_TRACE_LEVEL=DEBUG
    3. Update the <ORACLE__HOME>/<hostname_sid>/sysman/config/emomslogging.properties
    Change line from:
    log4j.rootCategory=WARN, emlogAppender, emtrcAppender
    To
    log4j.rootCategory=DEBUG, emlogAppender, emtrcAppender
    4. Remove/backup all log files from ORACLE_HOME/<hostname_sid>/sysman/log
    5. Start the dbconsole and upload the output of each command
    - start the dbconsole: "emctl start dbconsole"
    - issue "emctl clearstate"
    - status the dbconsole: "emctl status dbconsole"
    - check the status of the agent until it comes up: "emctl status agent"
    - force an upload: emctl upload
    6. Check If you are able to view the dbconsole Page & login
    check below logs may be you can see the close error messages to solve the issue.
    <ORACLE_HOME>/<hostname_sid>/sysman/log directory
    <ORACLE_HOME>/<hostname_sid>/sysman/config/emoms.properties
    Otherwise re-create the DBconsole using the metalink doc 278100.1 : How To Drop, Create And Recreate DB Control In A 10g Database. (Please check the steps from Recreate/ReConfig DB Control, if you want to re-create)
    Thanks.

  • Unable to reinstall HP MediaSmart Photo/Video/Movie after System Recovery

    My NoteBook originally came w/ Vista Ultimate & HP gave me a a disk for upgrade to Windows 7.
    Doing another System Recovery and while upgrading to Windows 7 it was recomended I uninstall HP MediaSmart Photo/Video/Movie since it might not be compatible w/ W7, which I did. After recovery/upgrade I find out HP has me reinstalling the same version. However, it will not install. I get the following message:
    "Error applying transforms, Verify that the specified paths are valid. C:\HP\tmp\src\1033.mst"
    product #: HP DDX16 Premium Series 
    p/n: NK135AV
    model # X16t-1200
    Windows 7 Ultimate 64bit (Upgarde to Windows 7 Ultimate provided by HP. Originally came w/ Vista Ultimate.)

    Hi,
    The download page for a lot of notebooks often has multiple entries for the same software - for both drivers and other software, just install the latest version.
    When you believe that you have installed all relevant software and drivers, you can always check by opening windows Control Panel and then opening Device Manager - look for any entry here that has a warning icon ( yellow triangle ) next to it.  If you find any, right click on the problem device and select Properties.  Click the Details tab, choose Hardware Ids from the dropdown box and post back with the details shown under Value.
    Best regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • The browser doesn't start after turning off and turning on the computer

    The browser doesn't start after turning off and turning on the computer. I tried to delete the program entirely (along with personal preferences), create a new account, install a different browser versions. All this did not help. (I have Windows 7.) Help, please! Every day I have to reinstall Firefox!

    Hello Nastena, try a clean re-install, certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you '''remove Firefox program files''' and then reinstall Firefox. Please follow these steps:
    '''Note:''' You might want to print these steps or view them in another browser.
    #Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
    #After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
    #Delete the Firefox installation folder, which is located in one of these locations, by default:
    #*'''Windows:'''
    #**C:\Program Files\Mozilla Firefox
    #**C:\Program Files (x86)\Mozilla Firefox
    #*'''Mac:''' Delete Firefox from the Applications folder.
    #*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
    #Now, go ahead and reinstall Firefox:
    ##Double-click the downloaded installation file and go through the steps of the installation wizard.
    ##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
    Please report back to see if this helped you!
    * check also if your antivirus or other security software(firewall, antispyware etc) blocks firefox access.
    thank you

  • After system recovery on a Pavilion 513n with XP SP2 I cannot run CD's created with Iomega Hotburn.

    I have a 9 year old Pavilion 513n running Windows XP SP2.  I have two RAM sticks, one of 1GB (added) and one of 256MB (the original with the computer).  The hard drive is a Western Digital 80 GB.  The CD/DVD drive is the original with the computer.  I recently had to do a system recovery due to a corrupted Windows file using the HP System Recovery Disks and an SP2 disk from Microsoft.  Since then, the computer will not recognize nor read CD's created on an Iomega external CD burner using Iomega Hotburn software.  These CD's worked fine previously even after system recoveries.  Other CD's run fine.  I have done previous system recoveries in the last nine years, and have never encountered this problem before.  I am hoping someone else may have run into this and can help me.
    Thanks

    I think this problem is more of a hardware issue.  Have you tried using a linux live cd?
    If it boots fine into safe mode then it is an installation/driver issue.  Safe mode bypasses most driver problems.  I would suggest you try using virtual pc from microsoft it is free and try it withing windows it is very, very easy to use to set up a virtual machine.
    It COULD be a hard drive issue, if so i would try a low level seek format, and then install windows.  Low level formats are NOT windows formats. Try installinf say PCLinuxos 2007 and if that works there is a problem with your drivers.
    Ultimately it may well come down to hardware, just use other options to actually isolate if it is a hardware problem or not.

  • How do I fix a initializing problem with my macbook pro? I only get to the blank screen with the apple logo and the "processing something"sign... it just doesn't start the system....

    How do I fix a initializing problem with my macbook pro? I only get to the blank screen with the apple logo and the "processing something" sign... it just doesn't start the system....
    Please help
    Marcelo

    If there is no loading bar, it's usually a problem with a third party kext file in OS X itself.
    You can press the power button down to force a hardware shutdown, then reboot holding the shift key down on a wired or built in keyboard, this will disable them and you go around and update your third party software.
    Gray, Blue or White screen at boot, w/spinner/progress bar
    Also take this time to backup your users files off the machine if possible.
    Most commonly used backup methods
    Sometime that won't work and you need to do more
    ..Step by Step to fix your Mac

  • FF doesn't start after update to version 27.0.1

    FF doesn't start after update to version 27.0.1
    Crash ID: bp-2bc18734-d643-4843-a10f-fd6102140214

    Firefox 27.0.1 is too new for me to know what unique issues it might have. I will message you a link to download the installer for Firefox 27.0 to see whether that reverses the problem.

  • Lost Quickbooks data after System Recovery

    Is there anyway to recover Quickbooks data after system recovery?

    Quickbooks is an accounting tool designed and marketed by the Intuit Inc. mostly used for financially-related processes anywhere in any big or small organization. So, financial means quite important and very useful data to store..so there are number of possibilities of QBW file or QuickBooks database corruption.
    Read More:  http://www.filesrecoverytool.com/quickbooks-recovery.html
    use free trail version demo

Maybe you are looking for