WINDOWS DOESNT RECOGNIZE MY 5C 7.0.4 ITUNES 11.1.3

So Ive done everything,
re installed itunes
restarted amd services
checked the apple usb driver which is working correctly
Windows recognizes my iphone 5c but itunes wont
PLEASE HELP

newmacgirl1 wrote:
So Ive done everything,
In that case, there is nothing more to do.

Similar Messages

  • Windows doesnt recognize my ipad

    Hello, here is my problem
    When i try to connect my ipad 1 through usb to my windows 7 x64 my windows doesnt recognize ipad and nothing happens on ipad's and pc's screen and when i also try to chage my ipad with DC it says not charging but it charges slowly. But i know that problem is not on the cables adn the itunes because i can connect my old iphone to my computer and it runs without any problem please help me with that.

    You might want to go through the steps in this article.
    iOS Device not Recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Don't charge your iPad by connecting to the PC. That will be a very slow trickle charge as you are seeing. Your USB port isn't supplying enough power. Use the power adapter and plug into a wall socket to charge the battery.
    iPad: Charging the Battery
    http://support.apple.com/kb/HT4060

  • My iPod doesn't work. The screen is black but it has a ticking circle in the middle. Its been stuck like that for more than an hour. My iTunes doesnt recognize the iPod Touch and says 'iTunes could nit connect to this iPhone-unknown error

    Its been stuck like that for more than an hour. My iTunes doesnt recognize the iPod Touch and says 'iTunes could nit connect to this iPhone-unknown error

    I'm soooo sorry to bump this but MAYBE someone will know what to do?! I've just tried EVERYTHING. I need help. Please, anyone?!
    *last chance and I'm backing away sloooowly*
    thanks to ANYONE who will suggest ANYTHING at all!!!

  • I purchased a used Ipod touch 4th gen and my computer (Windows XP) recognizes it as a camera but Itunes will not recognize the ipod. Old ipod works and connects fine. Any suggestions?

    I purchased a used Ipod touch 4th gen and my computer (Windows XP) recognizes it as a camera but Itunes will not recognize the ipod. Old ipod works and connects fine. Any suggestions?

    Well, there is always the possibility that it's been jailbroke, in which case, you're out of luck.  However...
    http://support.apple.com/kb/TS1369
    There have been some problems accessing pages on the Apple web site.  If the hyperlink gives you a "We're sorry" message, try again.

  • Windows doesnt recognize... blinking orange... they tell me to replace USB?

    OK, so my Shuffle 2nd Generation has the same problem as a lot of people. I plug it in, and Windows doesn't recognize it... sometimes I get an error message in my taskbar, but it never shows up in My Computer.
    So first, they told me to update my USB drivers. Tried it. Didn't work.
    Then, I called, and they said that I should purchase a USB 2.0 PCI card. The new iPod "requires" a high-powered port, he said. Let me show you why this makes me angry:
    http://docs.info.apple.com/article.html?artnum=60971
    This link says it all. The iPod shuffle is supposed to work with USB 1.1. Heck, I tried the iPod on my friend's USB 1.1 port, and while I didn't download any songs onto it, the computer recognized it immediately.
    I know my USB port works, because I tried an iPod Nano on my computer, and it worked.
    A couple of people on a different forum have told me to try an external USB hub. So here's my question: I know Apple doesn't reccommend it, but does anyone know for sure if a hub, or a PCI card, will work? (Or if either of them won't?)

    So, it works now... Whew.
    Right before I was about to buy an externally powered USB hub, my hard drive randomly died, so I had to replace it with a new one. Replaced it, with a clean re-install of Windows XP Home, and the iPod still didn't work, but then I switched around my USB printer and my iPod just for kicks, and it works.
    But it's still a bit finicky.
    It seems to work only if i unplug and replug my printer with the iPod attached in the "on" position. I've only uploaded music onto it a couple of times though... It always gives me the "Windows doesn't recognize... seems to have malfunctioned... yadda yadda" message, but then it switches to "Your device might work faster on a USB 2.0 Port" if I don't touch anything. (Which is weird, because I'm pretty sure all of my USB ports are 2.0.)
    Then it recognizes the iPod, although only as "USB Mass Storage Device," but it still brings up iTunes and works.
    No idea if the new hard drive had anything to do with it.
    Message was edited by: GrantM

  • Ipod nano 2nd generation malfunctioned, and windows doesnt recognize it.

    When i connect my ipod a message comes up in the corner saying device malfunctioned, and windows doesn't recognize it.I tried reseting it but it didnt work. So i cant edit pics. or songs or charge it. And i shut the computer down and reset it and it still wont work.

    Hey Steve,
    Thanks for the question, and welcome to Apple Support Communities.
    I understand that your iPod shuffle (2nd Generation) is not recognized in iTunes. The following troubleshooting assistant may provide a resolution:
    Apple - Support - iPod nano - iTunes Troubleshooting Assistant
    http://www.apple.com/support/ipodnano/assistant/itunes/
    If the above did not resolve your issue, choose an applicable article below that best describes your issue.
    Windows
    iPod appears in Windows but not in iTunes
    iPod not recognized in 'My Computer' and in iTunes for Windows
    iTunes reports that "iTunes cannot recognize this iPod at this time"
    Mac OS X
    iPod not recognized in iTunes and Mac Desktop
    MacBook and MacBook Air: iPod won't mount when connected via USB hub
    What to do if your computer won't recognize a USB or FireWire device
    Thanks,
    Matt M.

  • My Ipod touch 2nd gen will not sync for some reason to itunes. I've tried almost every possible solution I can find on the internet. The ipod charges fine when connected and Windows also recognizes it as a device but itunes refuses to. What should I do?

    Any help would be greatly appreciated.

    Thank you for the reply. Your answer crossed my mind but I havent downloaded songs in a while so I never paid attention to whether it was syncing or not. However, in my sync history I see that it successfully synced 3 months ago....

  • HT1926 I updated itunes and now it doesnt recognize my CD drive

    I updated Itunes and now it doesnt recognize my CD drive

    See Empty/corrupt iTunes library after upgrade/crash.
    tt2

  • I have windows 7 and it doesnt recognize my ipod

    i have windows 7 and it doesnt recognize my ipod, does anybody have any suggestions?

    Try here >  iOS: Device not recognized in iTunes for Windows
    Most likely the security software is preventing iTunes from recognizing the iPod.
    iTunes for Windows: Troubleshooting security software issues

  • I tunes doesnt recognize devices on windows 8

    I Connect my iphone & my mini ipad to thenew red itunes on windows 8 & it doesnt recognize both
    any suggestion ?

    Hey there amirabicha,
    If neither of your two devices are recognized in iTunes on your PC, I would recommend you use troubleshooting in the following article, named:
    iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

  • When i connect my ipod touch it doesnt recognize it and cant sync

    when i connect my new ipod touch to my computer it doesnt recognize it and doesnt sync

    Assuming you have a PC start here:
    iPod not recognized in 'My Computer' and in iTunes for Windows
    For Mac:
    Mac OS X v10.6 or later: iOS device not recognized in iTunes after restart
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X

  • When connecting IPOD to pc it doesnt recognize it said to try again nothing

    I bought my daughters the 7th generation IPOD nanos, when connecting to PC it said it doesnt recognize them, disconnect try again but it still does the same thing. Also we verified accts for yahoo and ITunes they have money in their acct's however when we try to click buy it does nothing any help on this?

    When I connect my ipod to USB immediately following taking it off my AC adapter, it causes my computer (PC, XP) to restart.
    Reinstall Windows. This has nothing to do with iTunes or any other Apple software, because that functionality is entirely Windows based.
    If reinstalling windows fresh (and doing all the updates) doesn't fix it, then you have a hardware problem on the PC.

  • Put new battery in ipod. works fine but windows doesnt see

    a few days ago I successfully put a new battery in my ipod.
    it has worked fine: charges plays all the music nothing weird.
    Then I tried to hook it up to my computer and my itunes doesnt recognize it, windows sees it but I cant access it (says Ipod on drive G). i am in the process of updating it (2005-11-17) now but it appears to be frozen. the drive is full so i dont really know how long it will take and maybe its not frozen.
    i also got this prompt:
    - drive not ready prompt:
    "the drive is not ready for use; its door may be open. Please check drive and make sure that a disk is insterted and that the drive door is closed"
    I did theother 4 R's as well before this and even changed the cable just to make sure. any thoughts???

    they are these blue straight plastic things with a little wedge hook doo dad on the end. they couldnt open the ipod initially , i used an exacto knife and pryed it open a little then got the plastics in there. Like changing a bike tube they give you two "irons" to work with. one to hold it open and the other to slid towards the top and bottom. it pops right open. you need to open it from the sides not the bottom or top. The mini i have no idea how to open i also thing the nano is built like the mini. I am sure if you google the battery replacement product it comes with instructions (but make sure you have good eyes, the writing and examples are TINY.

  • Hp g62 120eg notebook doesnt recognize my cd-room/win7/64bit

    i dont know why my computer doesnt recognize my cd-room..i have windows 7/64bit and i tryed to update my device driver but no result. code39.i am sure that is not a technique problem inside of it because i have not shake it or something like this.i make every they scan of my norton anti-virus.....  it worked(cd-dvd-room/writer) very well so far and i bought my pc a month ago. i don„t know what to do.please help me with some ideas.thx
    This question was solved.
    View Solution.

    Try MS Fixit Center:
    http://fixitcenter.support.microsoft.com/Portal?gssnb=1
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • Computer doesnt recognize my zen sleek ph

    the zen sleek says that it;s docked but? window's player says that it doesnt recognize it. help!

    It's MTP, there are no drivers. but the principal is correct.
    First of all are you sure your brother has USB .0? Because it is NOT designed to work with USB .0, it needs AT LEAST ., preferably 2.0. Whether it works or not I'd suggest buying a USB 2.0 PCI expansion card...
    Now, there is a certain update for DRM devices that needs to be installed sometimes.
    IF this is the case you will find it if you go to Windows Updates and select custom instead of express.
    You will find it under software updates... If you do then this means you don't have it which subsequently means that you'll need to install it...
    Also look in the CD your player came with, you MAY find it there, or you may simply find WMP0, try also re-installing it again.
    Hope that helps
    Cheers!

Maybe you are looking for

  • Report S_ALR_87012000 Asset Register does not show correct values sums

    Hi, I've taken a look at S_ALR_87012000 transaction - Asset Register (Italy) after an Assets Data transfer and something strange happens: 1-  the sum of column Depreciation for year is not correct. It is a little bit strange because the single assets

  • Missing config tabs in imanager

    Hi all: I am flat out missing the authentication tabs under proxy in imanager 2.7. I have all plugins installed and updated. What the heck am I missing??

  • Problem: could not be updated because the firmware file could not be found

    Hello, this is the same topic i have write in French. I have a problem with my ipod nano silver 4go, when i try to update my firmware, this message apears: "the ipod could not be updated because the firmware file could not be found" does someone know

  • Send email for approval before update of customer master

    i have to update the customer master XD02 or FD02 and then i have to sent mail to an external system for approval .How to send this mail while saving the transaction XD02 or FD02 is there any Badi or exit by which i can add this functionality.please

  • The "print" button doesn't work

    Hello, I have a problem with the "print" button, in a Macbook Pro 15" 2.8GHz. In all the programs, when I want to print anything, I go to file/print/print. Well, when I press the "print" button, it doesn't work, but in "Word" when I press the "print"