Windows Domain in log files

When doing a show transaction-log on a CE 560 running Application and Content Networking Software Release 4.1.3 the following line shows up:
"Windows domain is not logged with the authenticated username"
How do i turn this option on?
Thanks.

Thanks for the info. That works great. Only problem now is that it won't stick between reboots of the cache. I tried copy running-config startup-config and also tried to save the config via the GUI, but this option seems to get turned off once the cache reboots.
Any ideas on getting this turned on permanently.

Similar Messages

Domain's "$DOMAIN-diagnostic.log" file contains only incident reports

Domain's "$DOMAIN-diagnostic.log" file contains only incident reports
In OSB 11.1.1.4.0, the domain's $DOMAIN-diagnostic.log file contains ONLY lines like:
[2011-04-18T11:40:55.362+10:00] [CWSOATS2_OSB1] [NOTIFICATION] [DFW-40104] [oracle.dfw.incident] [tid: [ACTIVE].ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: <WLS Kernel>] [ecid: a9082073e3c17b68:4cae68eb:12f662ee536:-8000-0000000000000634,0] [errid: 16] [detailLoc: e:\wldom\cwsoats2\servers\cwsoats2_osb1\adr\diag\ofm\cwsoats2\cwsoats2_osb1\incident\incdir_16] [probKey: BEA-337 [WebLogicServer]] incident 16 created with problem key "BEA-337 [WebLogicServer]"
Previously, this file would contain a record of the activity of my JCA DBAdapter polling adapters.
I have seen this on all instances of OSB 11.1.1.4.0 to which I have access (all on Windows: desktop Win7 and server 2003R2).
Googling hasn't explained this to me: what this really means; why it occurs and what actions (if any) are needed to rectify this situation.
Can some kind member of this forum clarify things, please?

Hi,
Do you mean that when you remove the user’s workstation computer accout from AD then re-add it, the user still can use these "elevated" privileges to access other user directories?
Please check the permssions of the user directory network share on the user’s workstation to see if the permissions are the same with other worksatations. If you enable the offline files on the user’s workstation, please also disable the offline files to check
the results.
Best Regards,
Mandy
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

How do I read the Windows 7 backup log file (.etl).

I tried Windows 7 backup yesterday and it took over 5 hours to complete. When it did it used about 135GB of my backup drive which is okay, but when I looked a the backup drive, I found a couple directories that backup created. One had over 2000 .zip files in it. Is this how Custom backup works?
I also had another folder with teh Image backup data.
I decided I didn't like it so I deleted the backups, but now I would like to look at the log file. How do I do this? When I navigate to C:\Windows\Logs\WindowsBackup I see a WindowsBackup.2.etl file. When I double click on this I get the popup saying Windows 7 does not know what to do with this file. There is no way to look at the log from the Windows Backup window that I can see either.
A Google search did not turn up anything useful.Rich

Hi Ztruker,
Windows backup creates .zip files to store file backups and a VHD format to store image backups. Is there a reason why you are bothered with this format? To browse through the contents of the file backups, you could launch the restore files dialog and browse/search. To navigate through the image backup, you can mount the VHD through Disk Management. This is of course, if you have a backup. Unfortunately, backup does not create a user-readable log. The etl files are meant for product tracing in the case of failures and are for Microrosft use. Hope this helps.
Thanks,
Sneha
[MSFT]

Could not open log file in Win2000 sp3 Message in console

I have configured log file for ias. Then restarted my Application server. It is giving Error message "Could not open log file ''logs/logVal.10817" in kas window. But logs files are there (created by the server itself) in the logs floder.
I have configured logs for two systems.
One system is noted all messages in the file
Second system did not not any messages.
But the files are existed in the logs folder in both the systems.
I need to configure logs for ias,Kjs and KXS also.
Please suggest me regarding this.
thanks
sudheer

Hi,
I'm not sure what operation are you trying to, can you please confirm that ? Please check what kind of messages did you try to log, is it only errors ? or all errors & warning or all messages ?. If it were only errors and warnings, then there is a possibility that the server did not encounter any of this, due to which the log file can be empty.
Regards
Raj

Fetch client IP addresses from the Netlogon.log file of all domain controllers in the domain

Hi,
The event ID 5807 is logged in the system logs of domain controllers as a result of which the IP addresses for the missing subnets are logged in Netlogon.log under %systemroot%/debug. The end goal is to fetch the IP addresses along with rest of the respective
attributes from the Netlogon.log for all the domain controllers in the domain. I have the following script however, it gives me a 0KB file despite the fact that the Netlogon.log on the DC contains ample entries from last two months.
function GetDomainControllers {
$DCs=[system.directoryservices.activedirectory.domain]::GetCurrentDomain() | ForEach-Object {$_.DomainControllers} | ForEach-Object {$_.Name}
return $DCs
function GetNetLogonFile ($server) {
$path= '\\' + $server + '\c$\windows\debug\netlogon.log'
try {$netlogon=get-content -Path $path -ErrorAction stop}
catch { "Can't open $path"}
#reverse the array's order to the end of the file
[array]::Reverse($netlogon)
$IPs=@()
foreach ($line in $netlogon) {
#split the line into pieces using a space as the delimiter
$splitline=$line.split(' ')
#Get the date stamp which is in the mm/dd format
$logdate=$splitline[0]
#split the date
$logdatesplit=($logdate.split('/'))
[int]$logmonth=$logdatesplit[0]
#last month and this month
if (($logmonth -eq $thismonth) -or ($logmonth -eq $lastmonth)) {
#only push it into an array if it matches an IP address format
if ($splitline[5] -match '\b\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3}\b'){
$objuser = new-object system.object
$objuser | add-member -type NoteProperty -name IPaddress -value $splitline[5]
$objuser | add-member -type NoteProperty -name Computername -value $splitline[4]
$objuser | add-member -type NoteProperty -name Server -value $server
$objuser | add-member -type NoteProperty -name Date -value $splitline[0]
$objuser | add-member -type NoteProperty -name Time -value $splitline[1]
$IPs+=$objuser
} else {
#break out of loop if the date is not this month or last month
break
return $IPs
#Get last month's date
$thismonth=(get-date).month
$lastmonth=((get-date).addmonths(-1)).month
#get all the domain controllers
$DomainControllers=GetDomainControllers
#Get the Netlogon.log from each DC
Foreach ($DomainController in $DomainControllers) {
$IPsFromDC=GetNetLogonFile($DomainController)
$allIPs+=$IPsFromDC
$allIPs | Sort-Object -Property IPaddress -Unique | Export-Csv "E:\bin\NetlogonIPs.csv"
PLEASE HELP!!

Hi jrv,
Thanks a lot for your help.
I understand you cannot keep on iterating the code for me. However, I am stuck at this error :-
ERROR : Exception calling "Parse" with "1" argument(s): "String was not recognized as a valid DateTime."
After the following code finishes executing, I get the following output :-
$csv=cat c:\windows\debug\netlogon.log |
%{'{0}|{1}' -f $_.SubString(0,14),$_.SubString(15,$_.Length-15)}|
ConvertFrom-Csv -Delimiter '|' -header time,message
time message
04/14 01:18:45
NO_CLIENT_SITE: ServerX 10.x.x.x
04/14 01:17:45
NO_CLIENT_SITE: ServerY 10.x.x.x
04/14 01:17:44
NO_CLIENT_SITE: ServerY 10.x.x.x
04/14 01:17:43
NO_CLIENT_SITE: ServerX 10.x.x.x
However, I get the above mentioned error at the following line :-
$csv|%{$_.time=[datetime]::Parse(($_.time -replace ' ','/2015 '))}
I would later want to run the query just for logs from past day.
Entire code is as follows :-
function GetDomainControllers {
$DCs=[system.directoryservices.activedirectory.domain]::GetCurrentDomain() | ForEach-Object {$_.DomainControllers} | ForEach-Object {$_.Name}
return $DCs
function GetNetLogonFile ($server) {
$path= 'C:\Test\netlogon.log'
try {$netlogon=get-content -Path $path -ErrorAction stop}
catch { "Can't open $path"}
#reverse the array's order to the end of the file
[array]::Reverse($netlogon)
foreach ($line in $netlogon) {
$csv= $netlogon | %{'{0}|{1}' -f $_.SubString(0,14),$_.SubString(15,$_.Length-15)}| ConvertFrom-Csv -Delimiter '|' -header time,message | Out-Gridview
$csv|%{$_.time=[datetime]::Parse(($_.time -replace ' ','/2015 '))}
#get all the domain controllers
$DomainControllers=GetDomainControllers
#Get the Netlogon.log from each DC
Foreach ($DomainController in $DomainControllers) {
GetNetLogonFile($DomainController)
Please help!! Any help will be highly appreciated.

Log on to an apple computer using a Windows Domain 2003 Users

I work in a Windows 2003 environment with Active Directory (AD). All of our users are store in AD. The network has one apple computer, but user need to logon to the apple computer by using their window domain account. The OS on the apple is Tiger 10.4.11 and is update. I bind the apple computer to the domain example:
Active Directory Forest = MRC.EDU
Active Directory Domain = PAT.MRC.EDU
Preferred Domain Controller = MRC01K.PAT.MRC.EDU
Able to log on with one Windows Domain account, but no other can log on. The error message I get are:
You are unable to log in the user account " " at this time.
Logging in to the account failed because an error occurred. The home folder for the user account is located on AFB or SMB Server.
(We use a SMB and all of our servers OS is Windows 2003 Server.)
AND
The system is unable to log you in at this time.
I am weak on apple OS and need some help to solve is problem.

Hi the system is unable to log, and a warm welcome to the forums!
What Workgroup & AD settin gs do you have set on the Mac in Directory Access Utility?
See if these 2 links help also...
http://www.macosxhints.com/article.php?story=20050302023720578
http://allinthehead.com/retro/218/accessing-a-windows-2003-share-from-os-x
Mac Tiger and Panther can't access Windows 2008 sharing...
http://www.chicagotech.net/netforums/viewtopic.php?t=4578&sid=85c5f48e8552283bec fa356c9c34096

How can I save my Log files (and other my own files) to windows azure ?

Hi ,Dear all
I am migrating an Asp.Net Web App to Windows Azure. It runs in IIS
In that Web App,it will:
1. save log files to a virtual path (for example, save to $WEBAPP_ROOT_DIR/LOGFILES/
2. save ViewState by session as temporary files to a virtual path (for example , save to $WEBAPP_ROOT_DIR/VIEWSTATE/
3. upload some image files to the web server virtual path at $WEBAPP_ROOT_DIR/UPLOAD/
so, when I migrate the web app to windows azure,how can I do the same job in my code?It seems so many great changes in my code ...
Any ideas and suggestions for me ? many thanks!

hi Eric,
If you use Azure website, you can save your log and files into azure storage service ,such as blob or table.
If you use VM to host your service, you can only attach a data disk or file service on your VM and save your data into data disk or file service.
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Can't install Oracle XE on Windows 7 : the install ends fine but no database created and error in log file

When i try to install Oracle XE 64bit 11g on a windows 7, the installation ends correctly, but no database is created (no datafiles) and in the log file I find :
Oracle Database 11g Clusterware Release 11.2.0.2.0 - Production Copyright 1996, 2010 Oracle. All rights reserved.
2015-03-24 15:24:14.733: [ default][3316]ut_read_reg:2:ocr registry key SOFTWARE\Oracle\olr cannot be opened. error 2
[ CLSE][3316]clse_get_crs_home: Error retrieving OLR configuration [0] [Error opening olr registry key. Le fichier spécifié est introuvable.
What's the problem?

Oracle XE 64bit 11g on a windows 7
Which edition ?

Exchange 2013 Window Backup failure - fails to clean up log files - error FFFFFFFC

Hello,
We currently have an Exchange 2013 - Exchange 2007 coexistence setup.
1x Windows Server 2008 R2 with Exchange 2007 CAS/HUB
1x Windows Server 2008 R2 with Exchange 2007 MBX
1x Windows Server 2008 R2 with Exchange 2013 CU 3 (all roles)
Since our current backup solution (Symantec Backup Exec 2010 R3) does not support backing up Exchange 2013 CU3 databases, we are using the builtin Windows Backup feature to backup the Exchange 2013 CU3 databases.
This has functioned for a while, until all of a sudden, the log files are not cleared anymore, causing our log disk to fill up.
Our Exchange 2013 server looks like this:
C: Windows + Exchange installation
D: Databases
E: Database Log Files
F: Archive Databases
G: Archive Database Log Files
S: Dedicated backup volume
The backup is scheduled to run every day at 21:00 hours, performing a full VSS backup of D:,E:,F: and G: to the volume S:
Windows backup log says the backup completed with exceptions, leaving the Exchange logs untouched and filling the drive.
The Windows Backup Command Line tools are NOT installed since they are not compatible with Exchange 2013.
In the eventvwr we can see the following error:
The Microsoft Exchange Replication service VSS Writer (Instance a33ec440-7f12-4c50-806b-1bc5ceaf8aad) failed with error FFFFFFFC when processing the backup completion event.
The command VSSADMIN LIST WRITERS displays the following:
Writer name: 'Microsoft Exchange Writer'
   Writer Id: {76fe1ac4-15f7-4bcd-987e-8e1acb462fb7}
   Writer Instance Id: {cf84a907-76dc-428c-90e0-c18a3f9db493}
   State: [1] Stable
   Last error: Retryable error
Restarting the Microsoft Exchange Replication (MSExchangeRepl) clears the writer error, same with a reboot, however the error comes backup after the next backup.
Any thoughts on how to resolve this issue?
Thanks.

Hello,
Here is a blog for your reference.
http://blogs.technet.com/b/timmcmic/archive/2012/03/11/exchange-and-vss-my-exchange-writer-is-in-a-failed-retryable-state.aspx
If there is any useful information after you change the logging to expert, please free let me know.
Cara Chen
TechNet Community Support

Windows 8 installation error: "We couldn't create a new partition or locate an existing one. For more information, see the Setup log files."

I recently tried testing Server 2012 for installation and I had a major issue. Windows 8 also uses the same method for installation so this should also apply to Windows 8. I thought this might be helpful for other people who have the same
problem. My setup is a 1U server with no DVD drive, no hard drives, and only USB. I have a new hard drive that I wanted to install Server onto, so I put it in and ran the installer off a thumb drive. I kept receiving the following error when
I tried to format the hard drive and proceed with the installation:
"We couldn't create a new partition or locate an existing one. For more information, see the Setup log files."
After hours of troubleshooting, I determined my problem was I was using a thumb drive to install it, and Windows didn't like it. Some people had similar issues when similar devices were plugged in (i.e. external hard drives, SD cards, CF cards, etc).
In my case, it was the installation drive itself was a thumb drive. I ended up digging up an external DVD drive and placed the installation onto a DVD. Worked flawlessly. Now I am up and running.
I tried
the steps here to no avail.
Hope this helps anyone else with the same problems.

Hi,
Thanks for sharing. We really appreciate your time and efforts. Hope your experience will help other community members facing similar problems.
Leo Huang
TechNet Community Support

Lots of Bonjour Service errors 100 in my windows 7 log file

Hi there!
I have two windows 7 PC's, and both of them have a *lot* of errors 100 in the log files.
Most of them look like "Warning: Removed port mapping request 0101497C Prot 2 Int 9970 TTL 7200 duplicates existing port mapping request 0068EADC Prot 2 Int 9970 TTL 7200", where the 7200 sometimes is a 0.
Tried to open port 5353 in my Norton Internet Security, but after downloading BonjourPSsetup.exe and running it and rebooting, the problem persists.
I use Bonjour for ServeToMe, to stream to my iPad 1.
How come there are so many errors and how do I fix them and prevent them happening again?
Kind regards,
Eelco

I just google with "ORA-44003: invalid SQL name" and found below link:
http://www.oracle-base.com/articles/10g/dbms_assert_10gR2.php
SIMPLE_SQL_NAME
The SIMPLE_SQL_NAME function checks the input string conforms to the basic characteristics of a simple SQL name:
The first character of the name is alphabetic.
The name only contains alphanumeric characters or the "_", "$", "#"
Quoted names must be enclosed by double quotes and may contain any characters, including quotes provided they are represented by two quotes in a row ("").
The function ignores leading and trailing white spaces are ignored
The length of the input string is not validated.

Windows Server 2012r2 Failover Cluster Event Trace Log files

Hi
The only documentation I can find regarding event trace log files (Diagnostic.etl.*) for Failover Clustering relate to Server 2008/2008r2, which state that the etl files should be in C:\Windows\System32\winevt\Logs.
I have been exploring a clustering lab for Server 2012r2 and cannot find these files in that folder.
Strangely the PS cmdlet Get-ClusterLog still works!
Where are the etl files?
TIA

Hi,
Please check if the log is available in C:\ProgramData\Microsoft\Windows\WER\ReportQueue\.
If not, you can use Get-ClusterLog with the Destination parameter to get the log file.
Destination
Specifies the location to copy the cluster log(s) to. To copy to the current folder use "-Destination ." for this parameter.
http://technet.microsoft.com/en-us/library/ee461045.aspx
Thanks.
Jeremy Wu
TechNet Community Support

Seeing ORABPEL-12164 error message in domain.log file.

Hi,
Can someone help me in debugging the ORABPEL-12164 error seen in domain.log
<2007-06-15 11:40:36,521> <INFO> <NTAPDEV.collaxa.cube.ws> <AdapterFramework::Outbound> file:/E:/OraHome_1/integration/orabpel/domains/NTAPDEV/tmp/.bpel_NAPP_PO_PUBLISHER_1.0.jar/publish3A6BAM.wsdl [ Produce_Message_ptt::Produce_Message(STATE_MSG) ] - Using JCA Connection Pool - max size = <unbounded>
<2007-06-15 11:40:36,521> <INFO> <NTAPDEV.collaxa.cube.ws> <AdapterFramework::Outbound> file:/E:/OraHome_1/integration/orabpel/domains/NTAPDEV/tmp/.bpel_NAPP_INVOICE_1.0.jar/publishStatusToOracleBAM.wsdl [ Produce_Message_ptt::Produce_Message(STATE_MSG) ] - Using JCA Connection Pool - max size = <unbounded>
<2007-06-15 11:40:36,568> <ERROR> <NTAPDEV.collaxa.cube.ws> <AdapterFramework::Outbound> file:/E:/OraHome_1/integration/orabpel/domains/NTAPDEV/tmp/.bpel_NAPP_PO_PUBLISHER_1.0.jar/publish3A6BAM.wsdl [ Produce_Message_ptt::Produce_Message(STATE_MSG) ] - Could not invoke operation 'Produce_Message' against the 'JMSAdapter' due to:
ORABPEL-12164
ERRJMS_MSGPROD_CONSTR_ERR.
Unable to construct MessageProducer.
Please examine the log file to determine the problem.
<2007-06-15 11:40:36,568> <INFO> <NTAPDEV.collaxa.cube.ws> <AdapterFramework::Outbound> Change logging level for Logger 'NTAPDEV.collaxa.cube.ws' to DEBUG to see full error stack
<2007-06-15 11:40:36,568> <ERROR> <NTAPDEV.collaxa.cube.ws> <AdapterFramework::Outbound> file:/E:/OraHome_1/integration/orabpel/domains/NTAPDEV/tmp/.bpel_NAPP_PO_PUBLISHER_1.0.jar/publish3A6BAM.wsdl [ Produce_Message_ptt::Produce_Message(STATE_MSG) ] - Rolling back JCA LocalTransaction
Thanks, G

I recently took over this system, I believe all the configuration you mentioned should have been done.
Any pointers in verifying is highly appreciated.
Thanks, G

Log file window

I´m using a string indicator to display a log file of the program, showing the command executed whithin a time stamp. I pass the data between VI´s trough references.
This object is quite big, and difficult to place it in the user interface window. So, now I would like to take it into a floating window, hence when the user runs the test, it opens (and going on writing the commands on it). How can I do to implement that? I have to create another vi, but how to take the data there dinamically?

No problem - here you are. There are also examples shipped with LV.
Thomas
Using LV8.0
Don't be afraid to rate a good answer...
Attachments:
Writer.vi ‏21 KB
Reader.vi ‏21 KB

DataGuard Windows 9201 - log file transfer interrupt with a big redo log

OS WINDOWS
Oracle 9201
Primary: service_name orcl1 db_name orcl1
Standby: service_name orcl2 db_name orcl1
Same dir structure distribute on different VMware machine but connect with a real physical fiber network enviorment, two node distance more than 20km.
LOG FILE - 100M
MAX PERFORMACE MODE
we can got succesful result when input 'alter system switch log file' manually, the log usually small than 20m.
but when we try to switch a full redo log the error occur, log can't transfer to standby site.
it's seem to a transfer interrupt by some unnameable reason.
we check the network ping, lsnrctl service_name status, dataguard configration and windows tcpip configration, but have no conclusion.
we will crzy!! help
the log trace that use log_archive_trace=128 on primary site show:
Destination LOG_ARCHIVE_DEST_2 is in CLUSTER CONSISTENT mode
Destination LOG_ARCHIVE_DEST_2 is in MAXIMUM PERFORMANCE mode
- Created archivelog as 'C:\ORACLE\ORAARCH\ARC00095.001'
*** 2010-09-02 15:30:39.000
Fail to ping standby 'orcl2', error = 12571
Error 12571 when pinging standby orcl2.
*** 2010-09-02 15:30:39.000
kcrrfail: dest:2 err:12571 force:0
*** 2010-09-02 15:31:40.000
Fail to ping standby 'orcl2', error = 1010
Error 1010 when pinging standby orcl2.
*** 2010-09-02 15:31:41.000
kcrrfail: dest:2 err:1010 force:0
*** 2010-09-02 15:32:32.000
Setting trace level: 31 (1f)
*** 2010-09-02 15:32:32.000
ARC0: Evaluating archive log 3 thread 1 sequence 97
VALIDATE
PREPARE
*** 2010-09-02 15:32:32.000
Acquiring global enqueue on thread 1 sequence 97
*** 2010-09-02 15:32:32.000
Acquired global enqueue on thread 1 sequence 97
INITIALIZE
SPOOL
*** 2010-09-02 15:32:32.000
ARC0: Beginning to archive log 3 thread 1 sequence 97
*** 2010-09-02 15:32:32.000
Creating archive destination LOG_ARCHIVE_DEST_2: 'orcl2'
Network re-configuration required
Detaching RFS server from standby instance at 'orcl2'
RFS message number 151
Error 1010 detaching RFS from standby instance at host 'orcl2'
Disconnecting from destination LOG_ARCHIVE_DEST_2 standby host 'orcl2'
Ignoring kcrrvnc() detach error 1010
Primary database is in CLUSTER CONSISTENT mode
Primary database is in MAXIMUM PERFORMANCE mode
Connecting to destination LOG_ARCHIVE_DEST_2 standby host 'orcl2'
Attaching RFS server to standby instance at 'orcl2'
RFS message number 152
Dest LOG_ARCHIVE_DEST_2 standby mount ID: '42590f20'
Standby database restarted; old mount ID 0x4258a5ae now 0x42590f20
Destination LOG_ARCHIVE_DEST_2 is in CLUSTER CONSISTENT mode
Destination LOG_ARCHIVE_DEST_2 is in MAXIMUM PERFORMANCE mode
Issuing standby Create archive destination at 'orcl2'
RFS message number 153
*** 2010-09-02 15:32:32.000
Creating archive destination LOG_ARCHIVE_DEST_1: 'C:\ORACLE\ORAARCH\ARC00097.001'
- Created archivelog as 'C:\ORACLE\ORAARCH\ARC00097.001'
Dest LOG_ARCHIVE_DEST_1 primary mount ID: '0x42586021'
Archiving block 1 count 2048 block(s) to 'orcl2'
Issuing standby archive of block 1 count 2048 to 'orcl2'
RFS message number 154
Archiving block 1 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 2049 count 2048 block(s) to 'orcl2'
Issuing standby archive of block 2049 count 2048 to 'orcl2'
RFS message number 155
Archiving block 2049 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 4097 count 2048 block(s) to 'orcl2'
Issuing standby archive of block 4097 count 2048 to 'orcl2'
RFS message number 156
Archiving block 4097 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 6145 count 2048 block(s) to 'orcl2'
Issuing standby archive of block 6145 count 2048 to 'orcl2'
RFS message number 157
Archiving block 6145 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 8193 count 2048 block(s) to 'orcl2'
Issuing standby archive of block 8193 count 2048 to 'orcl2'
RFS message number 158
Archiving block 8193 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 10241 count 2048 block(s) to 'orcl2'
Issuing standby archive of block 10241 count 2048 to 'orcl2'
RFS message number 159
Archiving block 10241 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 12289 count 2048 block(s) to 'orcl2'
Issuing standby archive of block 12289 count 2048 to 'orcl2'
RFS message number 160
Archiving block 12289 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 14337 count 2048 block(s) to 'orcl2'
Issuing standby archive of block 14337 count 2048 to 'orcl2'
RFS message number 161
Archiving block 14337 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 16385 count 2048 block(s) to 'orcl2'
Issuing standby archive of block 16385 count 2048 to 'orcl2'
RFS message number 162
Archiving block 16385 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 18433 count 2048 block(s) to 'orcl2'
Issuing standby archive of block 18433 count 2048 to 'orcl2'
RFS message number 163
Archiving block 18433 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 20481 count 2048 block(s) to 'orcl2'
Issuing standby archive of block 20481 count 2048 to 'orcl2'
RFS message number 164
Archiving block 20481 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 22529 count 2048 block(s) to 'orcl2'
Issuing standby archive of block 22529 count 2048 to 'orcl2'
RFS message number 165
Archiving block 22529 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 24577 count 2048 block(s) to 'orcl2'
Issuing standby archive of block 24577 count 2048 to 'orcl2'
RFS message number 166
Archiving block 24577 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 26625 count 2048 block(s) to 'orcl2'
Issuing standby archive of block 26625 count 2048 to 'orcl2'
RFS message number 167
Archiving block 26625 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 28673 count 2048 block(s) to 'orcl2'
Issuing standby archive of block 28673 count 2048 to 'orcl2'
RFS message number 168
Archiving block 28673 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 30721 count 2048 block(s) to 'orcl2'
Issuing standby archive of block 30721 count 2048 to 'orcl2'
RFS message number 169
Archiving block 30721 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 32769 count 2048 block(s) to 'orcl2'
Issuing standby archive of block 32769 count 2048 to 'orcl2'
RFS message number 170
Archiving block 32769 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 34817 count 2048 block(s) to 'orcl2'
Issuing standby archive of block 34817 count 2048 to 'orcl2'
RFS message number 171
Archiving block 34817 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 36865 count 2048 block(s) to 'orcl2'
Issuing standby archive of block 36865 count 2048 to 'orcl2'
RFS message number 172
Archiving block 36865 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 38913 count 2048 block(s) to 'orcl2'
Issuing standby archive of block 38913 count 2048 to 'orcl2'
RFS message number 173
Archiving block 38913 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 40961 count 2048 block(s) to 'orcl2'
Issuing standby archive of block 40961 count 2048 to 'orcl2'
RFS message number 174
Archiving block 40961 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 43009 count 2048 block(s) to 'orcl2'
Issuing standby archive of block 43009 count 2048 to 'orcl2'
RFS message number 175
Archiving block 43009 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 45057 count 2048 block(s) to 'orcl2'
Issuing standby archive of block 45057 count 2048 to 'orcl2'
RFS message number 176
*** 2010-09-02 15:33:22.000
RFS network connection lost at host 'orcl2'
Error 3114 writing standby archive log file at host 'orcl2'
*** 2010-09-02 15:33:22.000
ARC0: I/O error 3114 archiving log 3 to 'orcl2'
*** 2010-09-02 15:33:22.000
kcrrfail: dest:2 err:3114 force:0
Local destination LOG_ARCHIVE_DEST_1 is still active
ORA-03114: not connected to ORACLE
Archiving block 45057 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 47105 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 49153 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 51201 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 53249 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 55297 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 57345 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 59393 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 61441 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 63489 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 65537 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 67585 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 69633 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 71681 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 73729 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 75777 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 77825 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 79873 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 81921 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 83969 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 86017 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 88065 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 90113 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 92161 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 94209 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 96257 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 98305 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 100353 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 102401 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 104449 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 106497 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 108545 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 110593 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 112641 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 114689 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 116737 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 118785 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 120833 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 122881 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 124929 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 126977 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 129025 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 131073 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 133121 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 135169 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 137217 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 139265 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 141313 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 143361 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 145409 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 147457 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 149505 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 151553 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 153601 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 155649 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 157697 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 159745 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 161793 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 163841 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 165889 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 167937 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 169985 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 172033 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 174081 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 176129 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 178177 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 180225 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 182273 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 184321 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 186369 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 188417 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 190465 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 192513 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 194561 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 196609 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 198657 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 200705 count 2048 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Archiving block 202753 count 2024 block(s) to 'C:\ORACLE\ORAARCH\ARC00097.001'
Closing archive destination LOG_ARCHIVE_DEST_1: C:\ORACLE\ORAARCH\ARC00097.001
FINISH
Archival failure destination LOG_ARCHIVE_DEST_2: 'orcl2'
Archival success destination LOG_ARCHIVE_DEST_1: 'C:\ORACLE\ORAARCH\ARC00097.001'
COMPLETE, min-succeed count met
*** 2010-09-02 15:33:27.000
ArchivedLog entry added for thread 1 sequence 97 ID 0x42585a2b: C:\ORACLE\ORAARCH\ARC00097.001
Marking [1] log 3 thread 1 sequence 97 spooled
Updating thread 1 sequence 97 archive SCN 0:4503061
Scanning 'to be archived' list': kcrrdal
log 2 thread 1 sequence 98
Completed 'to be archived' list
*** 2010-09-02 15:33:27.000
Releasing global enqueue
ARCHIVED
*** 2010-09-02 15:33:27.000
ARC0: Completed archiving log 3 thread 1 sequence 97
Scanning 'to be archived' list': kcrrwk
log 2 thread 1 sequence 98
Completed 'to be archived' list
Scanning 'to be archived' list': kcrrwk
log 2 thread 1 sequence 98
Completed 'to be archived' list
*** 2010-09-02 15:34:29.000
ARC0: Heartbeat ticks... (thread 1)
Establishing link for destination LOG_ARCHIVE_DEST_2 to standby orcl2
Primary database is in CLUSTER CONSISTENT mode
Primary database is in MAXIMUM PERFORMANCE mode
Connecting to destination LOG_ARCHIVE_DEST_2 standby host 'orcl2'
Attaching RFS server to standby instance at 'orcl2'
RFS message number 177
Dest LOG_ARCHIVE_DEST_2 standby mount ID: '42590f20'
Pinging destination LOG_ARCHIVE_DEST_2 at standby orcl2
RFS message number 178
Not in RAC mode
*** 2010-09-02 15:35:30.000
ARC0: Heartbeat ticks... (thread 1)
Establishing link for destination LOG_ARCHIVE_DEST_2 to standby orcl2
Pinging destination LOG_ARCHIVE_DEST_2 at standby orcl2
RFS message number 179
Not in RAC mode
*** 2010-09-02 15:36:22.000
ARC0: Heartbeat ticks... (thread 1)
Establishing link for destination LOG_ARCHIVE_DEST_2 to standby orcl2
Pinging destination LOG_ARCHIVE_DEST_2 at standby orcl2
RFS message number 180
Not in RAC mode
*** 2010-09-02 15:36:39.000
Setting trace level: 128 (80)
Setting trace level: 128 (80)
Destination LOG_ARCHIVE_DEST_2 is in CLUSTER CONSISTENT mode
Destination LOG_ARCHIVE_DEST_2 is in MAXIMUM PERFORMANCE mode
- Created archivelog as 'C:\ORACLE\ORAARCH\ARC00099.001'
Setting trace level: 128 (80)
*** 2010-09-02 15:37:32.000
Setting trace level: 128 (80)

Something is going on in your network:
RFS network connection lost at host 'orcl2'
Error 3114 writing standby archive log file at host 'or
Network Administrators may help

Windows Domain in log files

Similar Messages

Maybe you are looking for