Windows driver error access denied

I just bought an ipod nano 7th generation. I have windows 7. Computer does not authomatically recognized ipod. When I updated driver got the message access denied. I have tried everything I can to no avail Please help it's driving me crazy.

Hello there, kfoerton.
The following Knowledge Base article provides some great, in-depth steps for troubleshooting the issue you are describing:
iPod: Appears in Windows but not in iTunes
http://support.apple.com/kb/ts1363
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Similar Messages

File Error: Access Denied After Installing FCP X on FCP 7 Drive

Hi, after foolishing installing FCPX on the same har drive as FCP7 (I know against all sane advice and recommendations) I now get File error: Access Denied when trying to save work under FCP 7.
Does anyone have any advice re resolving this issue.
Would be much appreciated, I'm loathe to do a full reinstall if I can possibly avoid it
Thanks in adcance
john

Have you run software update and repaired premissions?
Was FCPX installed before or after FCP7?
FCP7 and the other FCS3 apps should be located in a folder in Applications if you're going to have them coexist with FCPX. If you had FCS installed prior to downloading FCPX, that relocation is done automatically. But you could also do it manually.
If you haven't sen it, here is Apple's best installation practices.
Russ

File Error: Access Denied on FCP?

I shot my documentary on a Canon T2i. I went on FCP to upload my clips and begin editing. I am not quite sure what the preset for my capture and sequence were before I started but I swtiched computers mid-way I was editing. Everything was saved my external hard-drive and now the FCP on the computer I am using will not let me render anything. It keeps saying "File Error: Access Denied". My documentary is due tomorrow and I don't know what to do.

Use Finder to select the drive your media is on, and press Cmd+i to open the information window.
At the bottom of the window, click the permissions disclosure triangle, and check 'ignore ownership of this drive'.
Hope that helps.
Andy

BSP Application Error : Access Denied

Hi Gurus,
I have developed a BSP application with an input field and a search help. I am using Java script to popup the search help window and "opener.document.<form>.<field>.value=value;" to pass selected value from search help window to main page. At BSP application level I have checked "Allows Portal Integration" check box. Now, when I try to select the value from search help at runtime, I am getting an error "Access Denied". It works perfectly fine when the check box "Allows Portal Integration" is unchecked. How do I resolve this issue keeping the check box checked.
Thanks in advance
John
<* Input Field *>
<htmlb:inputField id            = "sales_order"
                   value         = "<%= controller->sale_order %>"
                   maxlength     = "30"
                   showHelp      = "TRUE"
                   onValueHelp   = "showSalesOrderHelp()"
                   submitOnEnter = "X"
                   size          = "30" />
<* Java script routine to popup search help window *>
function showSalesOrderHelp()
   newDialog =    window.open("salesOrderHelp.htm","_blank","resizable=no,height=500,width=475");

The problem is that your popup windows probably do not have their domain relaxed. (Usually popp windows are implemented in an iframe, which must also be relaxed in the same way as the main page.)

When I try to render, it states "File Error:Access Denied"

When I try to render, it states "File Error:Access Denied". I am working with FCP 6.0.3 and am connected to a RAID with other FCP systems tied into it. Any ideas on what this means or how to fix it? Is it a permissions issue? If so, I don't understand how that works. Help!
Steve

Steve, I have the same problem... sometimes!
I have isolated it mostly to my audio files... I used to be able to use .mp3 just fine in FCP 5, but in 6, it seems to really have an affection for .aiff But today, I had to make sure the sample rate was the same! Ugh... so after re-sampling my music to match my other audio on the timeline (44.1) I'm all good...
Hope this helps... I also tried the permissions, etc... and had no needed repairs... and yes, my capture drive is set correctly, and the ownership is ignored, etc.
Michael

Error: Access Denied while opening the Sharepoint 2010 site.

Dear All,
When I am trying to open the site I am getting followinh error,
Error:
Error: Access Denied
Current User
You are currently signed in as: DomainName\Administrator
Sign in as a different user
Go
back to site
Can anybody please tell me how ro resolve this isse ?
Thanks and Regard's
Harish Patil

Hi,
Run the PowerShell cmdlet to list and check the users permisssion on SharePoint site. You may refer to the articles below.
Get Users Permissions List on SharePoint Webs – PowerShell Script
http://mkdot.net/mknetug/mk_sp/b/darko/archive/2010/10/01/get-users-permissions-list-on-sharepoint-webs-powershell-script.aspx
How to Check Effective Permissions of a User in Each Site in a Site Collection in Sharepoint 2007 and Sharepoint 2010 using Powershell
http://rahulrashu.blogspot.com/2011/12/how-to-check-effective-permissions-of_11.html
Hope that helps.
Ivan-Liu
TechNet Community Support

Render - "File Error: Access Denied"

When I attempt to Render All in a sequence I get "File Error: Access Denied". What am I doing wrong? Or is this a bug?
BTW, file is set to "Read & Write".
Thanks for any help.

David, I've just gotten back to training and I'm doing this with Lynda.com tutorials.
The problem area that I posted about has a moving clip that's in V1, overlaying that in V2 is text. From what I just figured out it's actually the text that's giving me the error. I found this out by unchecking "Clip Enable" for each and then tried rendering. It went fine for V1, but got the error on V2, the text.
Motion Clip Properties:
Quicktime
2.5mb
29.97fps
720x486
ProRes 422
NTSC
Text properties:
Layered Graphic Sequence
3.9mb
23.98fps
720x486
NTSC
Both are "Read & Write".
When I play this part of my sequence the motion clip does not move when I hit play, yet if I scrub I see the motion. This I assume is because it needs to be rendered. There's also a red line in the TL above these two clips.
Is there something more I need to post?

Ask your question.Can't render get File error access denied. Whats causing this? FCP 7.0.3

I Can't render get File error access denied. Whats causing this? FCP 7.0.3

Its an was update from an earlier version.
What earlier version?
And you're saying when you using File>Import>File and select a JPEG you get the error message?
You can't or shouldn't import MP3s into FCP.
Have you try creating a new porject and importing into that?

File error, access denied after software upgrade

We have three users who log on separately to the Mac. After doing a software update in standard mode, that user and administrator can no longer log and capture video, a file error, access denied warning comes up. What I have noticed is that the Final Cut Pro version number for the administrator and the user who done the update has changed to 6.04, where as the other two uses who are still able to capture video is 6.01.

Hmmm... the next step would be to trash the permissions of with FCPRescue. You can easily google for it.
But short of that... are there other system wide issues you've been having with admin vs user?
CaptM

Error Access Denied for List

I have a list for which inheritance is broken, and two SharePoint Groups were created (Read and Contribute).
There are around 30 users in the Read group and 10 in Contribute, all of which are from the same domain, and working properly.
I have two users who are in the same groups, from the same Domains, who are unable to access the list, getting Error: Access Denied.
I've tried deleting and re-adding their accounts but no change.
I've run their accounts through "Check Permissions", and both look good, identical to properly authorized users.
Any troubleshooting recommendations?
Thanks,
Scott

Hello,
Have you checked the permission of those two user at site level? if not then do so. I suspect that they are not having least permission at site level to access page or other default contents.
Another thing is, you may also try to add those user directly to list instead of group and then see the result. If this does not works then try to add them directly at site level. By doing this you can at least identify the problem.
Hemendra:Yesterday is just a memory,Tomorrow we may never see<br/> Please remember to mark the replies as answers if they help and unmark them if they provide no help

Windows Update for Security Essentials causes FDF-PDF network opening a file error:Access Denied

We open PDF files on mapped network drives, using FDF forms with fields. The latest Windows Update (12/15/14) KB2310138 is now causing the Adobe Reader application to say "Access Denied". I know it is the update for sure. I have one computer WITH the update that gets the error, another without that doesn't. If I change the "/F" reference in the FDF to use a local "C:" copy of the PDF, there is no error message.
Cannot undo the Windows Update. Although it shows on the history list, when I go into "Installed Updates" to undo it, it is not listed there.
Help!

Hi,
Are you still facing this issue?
Regards,
Ajlan Huda.

Activation Error - Access Denied when activating windows 2008 R2

I have a Windows 2008 R2 server, which was activate, now suddenly its giving an activation required message, when I try to apply my lic. key it gives an error
Windows Server 2008 R2 Activation Error 0x80070005
Access Denied
I want the error to be resolved.

Hi,
This issue may be caused by:
Lack of permission
Missing registry entries
Please try the method as Dave mentioned.
In addition, you could refer to this article for more detail information:
Activation Issue - The following Failure occurred while trying to use the product by: Code: 0x80070005 Description: Access is denied
http://panerarichang.blogspot.com/2012/02/activation-issue-following-failure.html
Please feel free to let us know if you have any update.
Regards.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

How do i fix the "Unable to install Apple Mobile Device USB Driver" problem access denied

My new iphone 5c will not work with my laptop. The apple mobile usb driver will not install. 'Access denied' is the final message in the diaolgue box of the device load error. The device is recognized but there is the yellow triangle with the exclamation point on it indicating an error installing. I've removed itunes and its components as directed step by step ..... twice..... I've disabled antivirus, firewalls, and even created a second admin profile in hopes that it would load the driver. Nothing is working. The apple person was supposed to call me back after we were on the phone 90 minutes. Well.... I guess she did not. Help!!! I would love to sync my phone. Any ideas?

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

Portlet editor's rich text editor gives javascript error 'access denied'

I created a header portlet using the Publisher's published content portlet template. When I try to edit the portlet content using the rich text editor in the portlet editor window, I get a javascript error in the status bar stating 'access denied'. I can't even type into the rich text editor window, it's totally disabled. Not that I see anything in there anyway. I'm logged in as admin. I've gone into the publisher explorer admin portlet and even 'published' the portlet's content, but to no avail. When I try to 'add header portlet' in my experience definition and try to use this portlet, nothing shows up, where the header portlet should be is just collapsed so my banner is just the top bar view bumped right on top of the nav view. (p.s. does anyone know how to take the alui doc's suggestion of 'disabling the topbar view and nav view' so that I can construct what I want entirely in a header portlet? Anyway, first things first, how do I get that access denied message to disappear in my header portlet's rich text editor and how the heck do I get it show up? Help.

There's probably not a developer in the forum that doesn't uncheck that box the moment they rebuild their machine/ennvironment. Changing the format of error messaging is hardly a fix for the error itself. Personally, I'm uploading 'file content items' now. I create the content in notepad and then upload > file content item. Then create a portlet that uses the pre-existing (was installed w/ publisher using their pte) 'published content item' web service. Go into the portlet's settings and associate the portlet w/ the content item you uploaded. Voila.
As far as using their rich text editor to create new content, I personally have no need anymore. However I'm sure our content managers will probably have to soon so I hope our latest installation will accommodate them w/o error, because I've never been aware of an actual fix to this problem.

File error: Access Denied in FCP when trying to save a project.

Can anyone help? I'm trying to save a project in FCP, however I keep getting an error stating access denied.
Thanks

Save it to a different folder or hard drive, quit and then try repairing your permissions with Disk Utility...
You could also go to the folder where you are trying to save to, press command-i and check to see if the ownership is correct... then try to save (then run the Permissions repair).

Windows driver error access denied

Similar Messages

Maybe you are looking for