Windows Error Code 127 is driving me nuts!!

I don't know what happened. It was barely a month ago when I was able to use iTunes normally. I had no problem with it and was able to add music to my library.Now, i can't open the application. I keep getting this...
Before, I used to get the whole "iAdCore.dll" error message but I've managed to get rid of that. Now, all I get is this. I searched on ways to fix this and I've had no luck. From uninstalling everything from Apple and reinstalling it, to repairing it and I still get nothing. Someone please help!

I'm having the same problem, exactly. This describes it perfectly, and it's incredibly frustrating.
In addition, I redemmed a gift card when I opened my iTunes account, and it was working fine then. Now (with credit remaining on my account) it doesn't work and I can't buy anything. Guess I lose my gift card credit.
I'm not using Speedbit, so that's not it. I've tried every other solution I can find online, and nothing has worked.
The only thing I've tried that works is this: I've been buying my music at Amazon instead.
Message was edited by: Chosen Folks

Similar Messages

Error code 2 windows error code 2

I updated my iphone yesterday to the newest os so I had to update my ITunes as well. In doing so I was left with error code 7 Windows error code 127. I looked through the forums and did what was said. I removed iTunes, bonjour, apple support, apple app support, etc. and now when I reinstall it I get error code 2 Windows error code 2. not really sure what to do now because uninstalling it and reinstalling is not working.

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if one component, such as Bonjour, won't install normally.
tt2

TS1717 When I try and start iTunes after trying to intall the 11.4 update on my Windows 7 laptop, it says to reinstall iTunes and "Windows Error Code 193" I tried ave the same failed response. Can someone help?

When I try and start iTunes after trying to intall the 11.4 update on my Windows 7 laptop, it says to reinstall iTunes and "Windows Error Code 193" I tried ave the same failed response. Can someone help?

Hi inharmony35,
If you are having issues with iTunes after an attempted update, you may want to try the steps in the following articles:
Apple Support: Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
Apple Support: Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Regards,
- Brenden

Hi- I applied the iTunes up to my Windows 7 86bit PC last Wednesday and iTunes will not load due to a Runtime error r6034Access to C Runtime Library Incorrectly. Then I get an windows error code 1114. I have tried rollling back and reinstalling but no joy

Hi- I applied the iTunes up to my Windows 7 86bit PC last Wednesday and iTunes will not load due to a Runtime error r6034Access to C Runtime Library Incorrectly. Then I get an windows error code 1114. I have tried rollling back and reinstalling but no joy

Hi Keen itunes User,
Thanks for using Apple Support Communities. This article has steps you can take for the error you're seeing:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
- Ari

RMI call resets Windows error code?

I'm attempting to retrieve a Windows error code from a remote system, using a simple call to the Windows API function getLastError() which is wrapped inside a JNI function on the remote system. getLastError() returns the last error code set for a particular process/thread.
The problem is, it appears that simply making the remote function call clears the error value before it can be returned. I can confirm that the error value was set on the remote system by printing the Process/Thread ID and getLastError() value to a console window on the remote system when one of my remote methods is called with out-of-range data. If I attempt to retrieve the error code, the Process/Thread ID match but the error code is always 0. No other methods were called on the remote system in between the initial error-generating method and the method which returns the error code.
Note that using the same JNI function calls without RMI works fine - I can generate error codes and retrieve them just fine.
Any ideas? Thanks in advance!

You're assuming that no other system calls are
executed between the one that caused the error you are
interested in and your GetLastError(). RMI executes
system calls on its own behalf, both to return the
value from the previous computation that caused the
error and to dispatch the new call into the method
that does GetLastError(). This approach is never going
to work. Why can't you call GetLAstError() straight
after the error happens, in the same remote method?This is what I suspected is happening, and if true, then I will simply have to rewrite my RMI method calls. Currently, they return -1 on error, and the error number is retrieved with a separate getLastError() call. This is done for legacy reasons (I'm calling C functions which were originally developed without Java/RMI in mind). As suggested, I'll have to call getLastError() immediately after an error occurs, and return the negative value of the error code rather than just -1. I've got about 200 remote methods to modify, so I was trying to avoid this, but hey... it's mostly search/replace.
Thanks for the help.

Make to compile the Petalinux software image, but "returned an error code (127) ;make[1]: *** [pkg_stagefs] Error 255"

Hello,
I am trying ot make to compile the Petalinux software image( make in $PETALINUX/software/petalinux-dist) . Refer to the UG977 PetaLinux SDK Getting Started Guide.pdf
However, when it gets to "[INFO ] Expanding stagefs", there is be an error . How can i do it?
My petalinux was installed in Debian-6.0.6-amd64 OS Host (in VirtualBox on my win7).
Thanks in advance!
Here is my PetaLinux compilation progress output:
$PETALINUX/software/petalinux-dist$ make
[INFO ] Saving previous build.log
[INFO ] Building ucfront tool
[INFO ] Building kernel
[INFO ] Building kernel modules
[INFO ] Building include
[INFO ] Building rootfs
[INFO ] Setting up stage config
[INFO ] Setting up romfs config
[INFO ] Updating for microblazeel-v830-bs-cmp-mh-div
[INFO ] Updating package manager
[INFO ] Expanding stagefs
[ERROR] E: Sub-process /home/focs/petalinux-v2013.04-final-full/software/petalinux-dist/tools/packagemanager/bin/dpkg returned an error code (127)
[00:02] \ make[1]: *** [pkg_stagefs] Error 255
make: *** [subdirs] Error 1

I am seeing the same error.
Environment:
Host PC : CentOS-6.5-x86_64
Xilinx Tools: Vivado 2013.3
PetaLinux Release: 2013.10
Page 11 of The Petalinux Installation guide document shows the packages required for Petalinux installation in the 1st column. I have installed all these packages except libstdc++-4.4.6-4.el6.i686. The only version readily available was libstdc++-4.4.7-4.el6.i686.
http://www.xilinx.com/support/documentation/sw_manuals/petalinux2013_10/ug976-petalinux-installation.pdf
sudo yum install dos2unix iproute gawk gcc git gnutls-devel net-tools ncurses-devel tftp-server zlib-devel flex bison libstdc++-devel.i686 glibc.i686 libgcc.i686
Loaded plugins: fastestmirror, refresh-packagekit, security
Loading mirror speeds from cached hostfile
* base: centos.mirror.lstn.net
* extras: mirror.ubiquityservers.com
* updates: centos.gravityfish.com
Setting up Install Process
Package dos2unix-3.1-37.el6.x86_64 already installed and latest version
Package iproute-2.6.32-31.el6.x86_64 already installed and latest version
Package gawk-3.1.7-10.el6.x86_64 already installed and latest version
Package gcc-4.4.7-4.el6.x86_64 already installed and latest version
Package git-1.7.1-3.el6_4.1.x86_64 already installed and latest version
Package gnutls-devel-2.8.5-10.el6_4.2.x86_64 already installed and latest version
Package net-tools-1.60-110.el6_2.x86_64 already installed and latest version
Package ncurses-devel-5.7-3.20090208.el6.x86_64 already installed and latest version
Package tftp-server-0.49-7.el6.x86_64 already installed and latest version
Package zlib-devel-1.2.3-29.el6.x86_64 already installed and latest version
Package flex-2.5.35-8.el6.x86_64 already installed and latest version
Package bison-2.4.1-5.el6.x86_64 already installed and latest version
Package libstdc++-devel-4.4.7-4.el6.i686 already installed and latest version
Package glibc-2.12-1.132.el6.i686 already installed and latest version
Package libgcc-4.4.7-4.el6.i686 already installed and latest version
Nothing to do
When I run petalinux-buiild from the project Xilinx-ZC702-2013.3 directory, I see the same error.
$ cd petalinux-v2013.10-final/
$ source settings.sh
PetaLinux environment set to '/home/logic/petalinux-v2013.10-final'
INFO: Checking free disk space
INFO: Checking installed tools
INFO: Checking installed development libraries
INFO: Checking network and other services
$ cd ../Xilinx-ZC702-2013.3/
$ petalinux-build
INFO: Checking component...
INFO: Generating make files and build linux
INFO: Generating make files for the subcomponents of linux
INFO: Building linux
[INFO ] pre-build linux/rootfs/fwupgrade
[INFO ] pre-build linux/rootfs/peekpoke
[INFO ] pre-build linux/rootfs/uWeb
[INFO ] build linux/kernel
[INFO ] update linux/u-boot source
[INFO ] generate linux/u-boot configuration files
[INFO ] build linux/u-boot
[INFO ] Setting up stage config
[INFO ] Setting up rootfs config
[INFO ] Updating for armv7a-vfp-neon
[INFO ] Updating package manager
[INFO ] Expanding stagefs
[ERROR] E: Sub-process /home/logic/petalinux-v2013.10-final/tools/packagemanager/bin/dpkg returned an error code (127)
[ERROR] make[2]: *** [pkg_stagefs] Error 255
[ERROR] make[1]: *** [sub_build_component_/none/packages-repo/single/plnx-repo] Error 2
ERROR: Failed to build linux

I can't install Itunes 11.1.2 on Windows, Error Code 2324

I connected my iPhone 4S to my Windows 7 Computer to synch my music. My older iTunes said that i have to update to 11.1.2. So i tried to update it with the apple software updater 4 times, but it did not work. i also tried to load the files only and then install it. It says to me that there is an error code 2324. I am very frustrated, please help me.
Taxla

Let's try the fixit from the following Microsoft document with that one:
Fix problems with programs that can't be installed or uninstalled

Windows error code 0xc0000034

Recently, when I switch on my laptop, this error code appear 0xc0000034.
My question is, why Windows can fail? I keep my Windows updated, installed anti-virus, scan my laptop every week, de-fragment my hard disk every fortnight.
Some say my hard disk may have problem, but it is okay. Then I try to repair using Windows Repair Environment. It did the trick but I have no idea how it's fixed.
Any of you facing the same problem? I search the internet and there appears a lot of people facing this issue. If it is a common problem, why Microsoft fail to fix it?
Thank goodness my laptop is recoverable, if not, imagine the time I lost just to do a fresh installation to my laptop and copy all my backup.
Chiyawa

Solved - for the record - followed the directions in this link:
http://pcsupport.about.com/od/fixtheproblem/ht/rebuild-bcd-store-windows.htm

My Satellite C wont load Windows - error code 0xcoooooe9

Hi,
get a status error come up when the laptop is turned on. The error code is 0xcoooooe9, windows does not load up and the diagnostics tool does not work.
Tried to recover to factory settings but this crashed out saying partition could not be created and only had an option to turn the laptop off.
Was bought from argos's ebay store less than 12 months ago and should still be under warranty but can not find out if it is on here.
Any help please ??
Message was edited by: MasterG

On this virtual way it is not easy to say what the problem is but maybe HDD make problems.
I recommend you to contact nearest Toshiba service provider and ask for help. They can check it.
At first clarify the warranty and I hope they will fix it for free.
Phone numbers and addresses you can find on http://www.toshiba.eu/innovation/generic/ASP_SUPPORT/

Windows error code 14

Sadly When i try to use spotify since after the update .. which seem to be faulty on my endso i close the progamand get installing spotifybut than the Error 14 pops up The intsller is unable to intall spotify because the files to write are in use by another process. Please make sure spoitify is not running and retry. (Error code 14) so after bringing up task manager and check for any running spotify apps expept for the intaller and find none.. i hit retry Were it just hangs ... until a reset and it loops al over againis there a way to disable the update ?

ERROR 14 FILES IN USE.. this bug is now over 2 years old and still we ave having to do geeky maunal workarounds in windows 7 I have had to manually intervene with 1.01, all the way through to 1.06 and today once more for 1.07 Will spotify ever be arsed to write an updater that just works, and that does not run from appdata or from appdata local, or will we all be on windows 19 before that happens? My current fix is to look for whatever the latset installer is called & for wheretis currently hidden ( the last couple have been hidden in an update sub folder of appdata local spotiy ), and COPY that file to desktop. BEFORE clicking " just restart spotify" and watiching it bomb out with error 14. then kill the failed update with task manager and run the installer from desktop, which then usually works. why we have to go through this rigmarole when any other software on the planet is able to instll updates in windwos 7 sensibly and reliably is beyond me . could we at least , for variety, have a meaningful error message to entertain ourselves , as that one is just a lie. looking in windows ask manager after 1=error 14 has appeared can proves that no other spotiy processes are runnign and yet RETRY will just cause install to installer to infinitely hang until euthanised. NB the days whtn the installer was always called spotify_new.exe and lived in appdata/spotify are gone. Now each version's installer has a cryptic nom-de-jour, and a new hiding place in local appdata , for added hide n seek fun

Windows error code 0x800f0922

I want to install .net framework but i keep getting the same error code. How do i fix it? I've also tried it by the windows feature on and off, same thing, How do i fix this? Need some help....

Im having the same problem, when i tryed to install Telnet Client using Programs and Features...

Windows error code -42110

I just upgraded iTunes software.
When launching the iTunes version 11.0.2.26 I get a Windows unkown error code : -42110.
Anyone who knows about this? Impact and solution? Thanks

Hello Guys, this upgrade seemngly also killed my iPod Classic 160GB... Both my iPad and iPod were connected to my Windows 7 Home PC. After the iTunes upgrade the same unknown error popped up, immediatel after came something like a "corrupted device". My iPod tried to restart, and seems to be in an infinite restarting loop...the apple logo is on for minutes, then a loud "click" from the HD and it starts again. Nothing helps (middle button+menu reset). Do you have any ideas? Thanks

Windows error code 1114

I am unable to access iTunes after a recent update. There shows a runtime error, then asks me to download itunes. I have tried to download itunes, but it does not owrk. The erro code is 1114.

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall go to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

Windows error code: "msvcr80.dll missing"

I just upgraded to the latest Itunes and now get the error "msvcr80.dll missing". Can anyone help? I'm running a windows 7 Sony Vaio laptop

Setag wrote:
Hi,
I'm using Windows 7 64bit and the problem was solved in one step. Simply "Restore" Windows to a time prior to your installing the iTunes update.........It fixed everything, my library was there and I had access to iTunes.
One thing to remember, when you restore and open iTunes DON'T choose to update iTunes
I just did the exact same thing as you did after spending about an hour trying to fix it. iTunes updates drive me insane!!! I wish they would quit trying to "improve" what was never broken in the first place.

Every time I close a window that has opened up (not a tab) all the open windows close and it's driving me nuts!

If I have opened up a link and it comes up as a separate window and not a tab, then I go to close that window, all the other Firefox windows that are open will close too. Is there anything to prevent this? It is extremely annoying when I have to go and open all the windows/tabs again!
== This happened ==
Every time Firefox opened
== since upgrading

Do you have that problem when running in the Firefox SafeMode?
[http://support.mozilla.com/en-US/kb/Safe+Mode]
''Don't select anything right now, just use "Continue in SafeMode."''
If not, see this:
[http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes]

Windows Error Code 127 is driving me nuts!!

Similar Messages

Maybe you are looking for