Windows error code -42110
I just upgraded iTunes software.
When launching the iTunes version 11.0.2.26 I get a Windows unkown error code : -42110.
Anyone who knows about this? Impact and solution? Thanks
Hello Guys, this upgrade seemngly also killed my iPod Classic 160GB... Both my iPad and iPod were connected to my Windows 7 Home PC. After the iTunes upgrade the same unknown error popped up, immediatel after came something like a "corrupted device". My iPod tried to restart, and seems to be in an infinite restarting loop...the apple logo is on for minutes, then a loud "click" from the HD and it starts again. Nothing helps (middle button+menu reset). Do you have any ideas? Thanks
Similar Messages
-
Error code -42110 after installing intunes 64
Hi,
after installing iTunes 64 (Windows) on my new Netbook I get an error code (-42110). Also it is not possible to synchronize my iPod. I can press the button "synchronize" but nothing happend. So my music can not be "downloaded" from iPod into new Mediathek.
Any idea what to do to fix it?
Thnaks for supportFor the 42110 error try this user tip:
https://discussions.apple.com/docs/DOC-4831
Hope that helps.
Regards. -
TS1717 error code 42110. What does that mean?
I keep receiving an error code #42110 when I try to play my movie. Any help?
Perhaps try the "Error 3001," "-42110," or "5103" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
iTunes: Advanced iTunes Store troubleshooting -
Every time I open iTunes, I get the error code -42110, but it seems iTunes is working normally, at least I don't see any critical errors. Whats does that mean and how do I fix it?
Try the following user tip:
iTunes for Windows 11.0.2.25 and 11.0.2.26: "Unknown error -42110" messages when launching iTunes -
How do i fix error code -42110 on itunes
Perhaps try the "Error 3001," "-42110," or "5103" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
iTunes: Advanced iTunes Store troubleshooting -
Error code (-42110) has come up when I started iTunes what does this mean
error code (-42110) has come up when I started iTunes what does this mean
Try the following user tip:
iTunes for Windows 11.0.2.25 and 11.0.2.26: "Unknown error -42110" messages when launching iTunes -
When I try and start iTunes after trying to intall the 11.4 update on my Windows 7 laptop, it says to reinstall iTunes and "Windows Error Code 193" I tried ave the same failed response. Can someone help?
Hi inharmony35,
If you are having issues with iTunes after an attempted update, you may want to try the steps in the following articles:
Apple Support: Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
Apple Support: Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Regards,
- Brenden -
Hi- I applied the iTunes up to my Windows 7 86bit PC last Wednesday and iTunes will not load due to a Runtime error r6034Access to C Runtime Library Incorrectly. Then I get an windows error code 1114. I have tried rollling back and reinstalling but no joy
Hi Keen itunes User,
Thanks for using Apple Support Communities. This article has steps you can take for the error you're seeing:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
- Ari -
RMI call resets Windows error code?
I'm attempting to retrieve a Windows error code from a remote system, using a simple call to the Windows API function getLastError() which is wrapped inside a JNI function on the remote system. getLastError() returns the last error code set for a particular process/thread.
The problem is, it appears that simply making the remote function call clears the error value before it can be returned. I can confirm that the error value was set on the remote system by printing the Process/Thread ID and getLastError() value to a console window on the remote system when one of my remote methods is called with out-of-range data. If I attempt to retrieve the error code, the Process/Thread ID match but the error code is always 0. No other methods were called on the remote system in between the initial error-generating method and the method which returns the error code.
Note that using the same JNI function calls without RMI works fine - I can generate error codes and retrieve them just fine.
Any ideas? Thanks in advance!You're assuming that no other system calls are
executed between the one that caused the error you are
interested in and your GetLastError(). RMI executes
system calls on its own behalf, both to return the
value from the previous computation that caused the
error and to dispatch the new call into the method
that does GetLastError(). This approach is never going
to work. Why can't you call GetLAstError() straight
after the error happens, in the same remote method?This is what I suspected is happening, and if true, then I will simply have to rewrite my RMI method calls. Currently, they return -1 on error, and the error number is retrieved with a separate getLastError() call. This is done for legacy reasons (I'm calling C functions which were originally developed without Java/RMI in mind). As suggested, I'll have to call getLastError() immediately after an error occurs, and return the negative value of the error code rather than just -1. I've got about 200 remote methods to modify, so I was trying to avoid this, but hey... it's mostly search/replace.
Thanks for the help. -
Error code 2 windows error code 2
I updated my iphone yesterday to the newest os so I had to update my ITunes as well. In doing so I was left with error code 7 Windows error code 127. I looked through the forums and did what was said. I removed iTunes, bonjour, apple support, apple app support, etc. and now when I reinstall it I get error code 2 Windows error code 2. not really sure what to do now because uninstalling it and reinstalling is not working.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if one component, such as Bonjour, won't install normally.
tt2 -
Why am i getting error code (-42110)
I cant download a movie without getting an error code (-42110) The error code appears at the time when it usally gives the option to play or watch the movie later.
Hello robert,
According tot the article below, that error is related to authorization issues. Take a look a the section below for the steps on how to resolve it. You will want to make sure that you are up to date with iTunes and may need to remove the SC Info folder to get it sorted out.
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/en-us/ts3297
"Error 3001," "-42110," or "5103"
This alert is related to iTunes Store movie rentals and authorization issues.
Make sure you are using the most recent version of iTunes and QuickTime. They both can be downloaded free of charge.
If your iTunes is up to date, remove the SC Info folder.
Regards,
-Norm G. -
I tried renting a movie, but every time I try to play it, it gives me an iTunes error code -42110. What is the deal?
- CratinSomething like this happened to me, where something went wrong on Apple's end and a movie I rented wouldn't play. I contacted Apple over the phone and they gave me back my money and fixed the problem for future use.
-
What does it mean error code -42110?
what does it mean error code -42110?
Try this user tip:
https://discussions.apple.com/docs/DOC-4831
Hope that helps.
Regards.
Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Communities page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums and in the Apple Knowledge Base, before you post a question. -
What it is mean? Everytime i start up itunes i get the error code -42110
Everytime i start up itunes i get the error code -42110. What it is mean?
Someone help me please!https://discussions.apple.com/docs/DOC-4831
-
TS1717 error code (-42110.) i get this code anytime I sync my ipod or open itunes
anytime I sync my ipod or open itunes I get error code -42110. I do not see anything not working but it dose concern me. Dose anyone know what is causing this and what to do to stop it?
Error 42100
See if this helps.
Maybe you are looking for
-
Why does my printer automatically go to send a fax when I just want to print?
Why does my printer automatically go to send a fax when I just want to print? This question was solved. View Solution.
-
Ipod 5th will stop in middle of playing, showing all songs as -0.00.
How can I get this ipod to play the songs short of going through itunes to reinstall everything?
-
Anyone Want to Help me?(10 Duke dollars to best answer)
i need help figuring out in this code how to ask "Would You Like To Continue Shopping". Well i know how to ask but i dont know how to end and give subtotal if the answer is no and if the answer is yes i dont know how to have my program repeat import
-
Installing Doug Lea's concurrent Package (easy)
Hi, I'm having trouble getting Doug's package to work, probably because I didn't install correctly. I unzipped into the folder "C:\Java", which created "C:\Java\concurrent", containing all the files. I added this latter folder to my classpath and com
-
i've got a pc with a ms-6163va motherboard with a p3 500 processor. Since I wanted to install xp on it I've updated the bios to 3.5, i've tried clearing the cmos and also disabling all optimizations and apm in the bios but there's nothing to do: when