Windows Error Recovery Windows 7

I have a late 2006 iMac 24" and I simply can't complete the installation of windows 7 on it. I am caught in a Windows Error Recovery screen loop, it just keeps restarting and go back to that screen. I have tried just about everything I can think of and have tried everything suggested in my search for a solution. Can anyone help or even just tell me that my iMac model isn't compatible......

Satellite C640D-1064U (PSC36L-003003)
Downloads are here.
Windows loaded files from repair CD disk. A Windows blue background screen with leaves appears without Windows logo (not the blue screen of death); files load and cursor appears; CD stops running; but nothing else happens with screen for eight hours.
Something wrong with that repair disc or the hardware. The bitness of Windows on the hard drive should not matter at this point. I would burn another disc and try again.
Never seen a blue background with leaves. Can you snap a photo for us?
-Jerry

Similar Messages

Satellite C640D 64-Bit Windows 7 Windows Error Recovery

Model PSC36L-003003 SN XXXXXXXXX
Boot is set to hard drive first and CDRW second.
Turn on the computer
8 seconds later it goes to Windows Error Recovery.
When I choose Launch Startup repair, it goes straight to Windows Boot manager. See #6.
When I choose Windows start normally, it goes to “Starting Windows”. After several minutes, it recycles to Windows Error Recovery Screen and then to Windows Boot Manager screen. See #6.
If I choose neither, it goes to Windows Boot manager; Windows failed to start; Status: 0xc000000e Info: The boot selection failed because a required device is inaccessible. I do not have the Windows Installation disc.
Action taken:
Created a Window 7 64-bit system repair disk on another computer.
Changed bios boot to CDRW first and hard drive second and saved.
Inserted System repair disk into CD drive.
Turned on computer and pressed any key.
Windows loaded files from repair CD disk.
A Windows blue background screen with leaves appears without Windows logo (not the blue screen of death); files load and cursor appears; CD stops running; but nothing else happens with screen for eight hours.
I do not have the Windows Installation disc.
Please, what do you think is wrong with the computer or what should I do next? Your help will be greatly appreciated. How do I confirm that it is Windows 7 32 or 64 Bit? I am trying to fix this for my friend who probably bought it in the Indonesia area. Thank you in advance.
[Moderator edit to remove serial number.]

Satellite C640D-1064U (PSC36L-003003)
Downloads are here.
Windows loaded files from repair CD disk. A Windows blue background screen with leaves appears without Windows logo (not the blue screen of death); files load and cursor appears; CD stops running; but nothing else happens with screen for eight hours.
Something wrong with that repair disc or the hardware. The bitness of Windows on the hard drive should not matter at this point. I would burn another disc and try again.
Never seen a blue background with leaves. Can you snap a photo for us?
-Jerry

Help me, pls! Getting Windows Error Recovery of windows 7

Hi, my computer is in problem. It's Windows Error Recovery. Then, I did the steps by computer,I clicked the Startup Repair(Recommanded). A startup repair window appears and it scans the problems. It's scanning, I waited for several hours.. but it's scanning and scanning endlessly! It says "recovering disk error,this might take over an hour to complete".. yeah, more than an hour, I waited for five hours, nothing changed..scanning and scanning... What should I do?....

Hi,
Try tapping F8 on startup to check if it loads to Safe Mode..If it loads to Safe mode then you can perform a System Restore...Also check the hard drive by tapping F2 on startup..
OR,
Try the steps mentioned in the link below:
Actions when specific error messages display
Note:
If you have HP Support Assistant installed on the computer(The Blue Question Mark) then open it ==> Complete all pending Updates & Tuneups==> Restart and Check. It may solve your problem
Although I am an HP employee, I am speaking for myself and not for HP.
**Click on “Kudos” Star if you think this reply helped** Or Mark it as "Solved" if issue got fixed.

Network drivers not working and Windows Error Recovery Message issues

I have a ThinkPad laptop T530 series in which about five of my network adapters are showing the exclamation mark in a yellow triangle next to them. When clicking on properties, it states that" this device will not start--code 10." I have tried the network sharing troubleshooter and this has not worked.
The second issue I am having is that upon starting my computer I am constantly getting a Windows Error Recovery message which I have to press on the proceed to Windows as the startup repairs do not seem to rectify the issue.
I would very much appreciate if someone could help me resolve these issues

I don't have a solution to your main problem, but I have one for the error message.
If I am right, then Airport is causing the problem. 192.168.1.1 is the address that the Airport Base Station will take right away. To fix this, you need to go into Airport Admin Utility. Click on your base station and click "Configure." Click on the "Network" tab. Now it should look something like this:
http://i198.photobucket.com/albums/aa187/adam_0/Network%207-28-07/Picture2.png
The problem is that the Airport is using the same IP number set as the router that you have. If you disconnect or unplug the Airport, then that would fix it easily, but if you want to keep your Airport connected, then all you need to do is pick one of the other number formats, like this:
http://i198.photobucket.com/albums/aa187/adam_0/Network%207-28-07/Picture4.png
Now, I'm no expert on this stuff, but from what I understand, this could get you one step closer to your destination. Good luck!

Computer won't start up (Windows error recovery)

I have tried to go on my computer today and it will not start every time I start it up it goes to Windows Error Recovery so I go on this and use the startup repair and all I get is startup repair cannot repair this computer automatically. I have tried pushing
f8 to go into safe mode but when I push f8 it gives me boot drivers to use so I duno what that means. any suggestions on what I can do to fix my computer?? I have no disk's to do with the computer. If you need any more details just ask.
I also get the blue screen when the computer restarts itself and goes back to the windows error recovery
Thanks

Hi,
Can you choose system restore to choose a restore point to go back to a previous state?
http://windows.microsoft.com/en-in/windows/what-are-system-recovery-options#what-are-system-recovery-options=windows-7
Alex Zhao
TechNet Community Support

I too cannot download latest itunes version. Am seeing all of the same error messages. MSVCR80.dll is missing from computer. For windows "Error 7 (Windows error 126) appears. Must be a defect in the lastest software update. How do you get Apple to respond

I too cannot download latest itunes version. Apple needs to respond and fix what is certainly a software defect. Am seeing all of the same error messages including MSCVR80.dll is missing from computer. For Windows 7 a "Error 7 (Windows errror 126) appears. How do you get Apples's attention. It is impossible to link up with real support from their website?

Remove old Apple programs, and use Explorer web-browser. (Firefox or Chrome will not do)

Restore windows error, restore windows error

Hi. My Finder keeps coming up with the message "The application "Finder" unexpectedly quit while trying to restore its windows" and it gives me the option to restore the windows. Whether I chose to restore or not, nothing happens. The screen keeps flashing.
no file or nothing shown on desktop and the finder icon on dock jumping according to flashing.
can't empty trash even secure empty trash command.
what's the solution?

http://support.apple.com/kb/ts3694
Error 1603
Follow the steps listed above for Error 1604. Also, discard the .ipsw file, open iTunes and attempt to download the update again. See the steps under Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations. If you do not want to remove the IPSW in the original user, try restoring in a new administrator user. If the issue remains, Eliminate third-party security software conflicts.
Error 1611
This error typically occur when security software interferes with the restore and update process. FollowTroubleshooting security software issues to resolve this issue. In rare cases, this error may be a hardware issue. If the errors persist on another computer, the device may need service.

HP Pavilion dv6 1334us won't start after windows update, stuck in Error Recovery

My computer is an HP Pavilion dv6 1334us with 32bit-windows 7. The computer did automatic updates and when it started up said there was another one avaliable through WIndows Updater. I installed the update and it said the computer needed to restart for the update to take effect. I choose to restart and the computer wouldn't boot back up, it boots to the 'Windows Error Recovery' screen where my options are 'Launch Startup Repair (recommended)' and 'Start Windows Normally'. When I select the repair, it says it loads windows files, then goes back to the error recovery screen. When I choose to start normally, it freezes the second it trys to start, flashes a blue screen and then returns to the Error Recovery page again.

Please follow the steps in the following document to troubleshoot and fix the boot issue that you are facing.
Overview of Troubleshooting Startup Problems (Windows 7, Vista, XP): http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01443371&cc=ad&dlc=en&lc=en&jumpid=reg_r1002_us...
Please let me know the results so that I can try helping you further. Thank you.
!-------------------Please click the white star in the blue box to give KUDOS if this answer was helpful or clarified your question or issue.
If my answer solved the issue, then please click on the Accept as solution button. Thank you-----------------------------------------------------------------!
I am an HP Employee but I am not speaking on behalf of HP. The opinions and views that I express here are my own.

HP G62 Windows Startup error recovery Failure

Notebook:
HP G62 - 228CL
Running Windows 7 64-bit
Hello everyone, I need a bit of help.
My computer will boot windows 7. When I start it up, it tries to boot up. I then get a Windows failed to boot message on the windows error recovery screen and asks me if I would like to use Windows Startup Repair Tool to fix the Problem. But the tool never starts up. It just leads to a windows background and does nothing. I have also tried using f11 System recovery but it does nothing.

Hi,
Firstly, regarding your existing files.
One possible way to try and retrieve your files from a non-booting drive is to follow the process detailed in the link below. The Ubuntu operating system CD you create can run from the CD alone ( ie it doesn't have to install on the Hard Drive ) and I've often found it to be successful in retrieving data even from a failing Hard Drive. When you've created the CD, follow the instructions and see if you can back up your existing files.
http://www.howtogeek.com/howto/windows-vista/use-ubuntu-live-cd-to-backup-files-from-your-dead-windo...
Secondly, regarding the replacement of the Hard Drive.
The drive on the link below is an example of one that would be fine for your notebook.
500Gb Hard Drive
The procedure to replace the Hard Drive starts on Page 52 of your Maintenance & Service Guide.
Once done, simply use your Recovery DVDs to reinstall the Operating System on the new drive - the procedure is described in the HP document Here.
If you don't have your Recovery Discs, you can order a replacement set using the link below.
Order HP Recovery Discs.
If you have any problem with this link, order them directly from HP.
If you live in the US, contact HP Here.
If you are in another part of the world, start Here.
Best regards and happy holidays,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

ITunes not installed correctly. error 7 windows error 127

I recently updated my iTunes for Mac and ever since then I get an Error 7 (Windows error 127) window after this window (below) pops up.
Any recommendations how to fix it? I've tried uninstalling and reinstalling ALL Apple software, restarting, and it's still giving me that error.

Try deleting the file Webkit.dll from the folder C:\Program Files (x86)\Common Files\Apple Application Support, then repair Apple Application Support in the Programs and Features control panel.
If hasn't worked then for general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

I did the update and now cant open itunes i get a error 7 windows error 198

I did the update and now itunes wont open...I get a windows error 7 (windows error 198) HELP

Hello there, thumerick.
The following Knowledge Base article addresses the very issue you're describing:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Windows Error Msg when using Itunes - "There is no disk in the drive. "

Hi there -
Desperately seeking help before I lose my mind !
Whenever I try to do anything in iTunes I get the Windows windows error message "WINDOWS - NO DISK. There is no disk in the drive. Please insert a disk into drive ." with the options to either CANCEL, TRY AGAIN or CONTINUE.
Regardless of which of the options I select, the error message re-appears & will not close.
I try CTRLALTDEL but I get the message Itunes is "not responding".
I have tried:
- Updating iTunes software
- Making sure I have the latest Windows Updates
- Uninstalling and reinstalling iTunes
- Selective start-up where I disable all applications which might be clashing with iTunes
- clearing the menu in QuickTime
None of these work
Any ideas ?
Thanks -
HP Pavillion Windows XP

I am wondering if you ever got this problem straightened out, or if anyone else knows the solution to this problem. I am receiving the exact same message as you talk about receiving here:
"WINDOWS - NO DISK. There is no disk in the drive. Please insert a disk into drive ."
No drive is listed, just a "."
I also have tried uninstalling and resinstalling iTunes many times. Not only that, but I thought it might be a virus problem of some kind, so I totally resintalled my Windows XP system. All to no avail. Even on my newly installed system I am having this problem in iTunes.
I have found that if I hit Cancel about 80 times (literally), iTunes will finally load. But it is crazy that anyone should have to go throug this each time he loads the iTunes program.
Someone posted a link to a Microsoft fix for a similar problem, but I was unable to understand the fix, and the problem listed in the fix did not seem to correspond with the problem we're having.
If anyone knows the solution to this problem and is able to give instructions for the solution, I would really appreciate it! I would just use an alternative mp3 player to iTunes at this point if I could, but that isn't really feasible since I have an iPod.

TS3074 iTunes for Windows: "Error 7" message when opening iTunes in Windows 8

I have Windows 8 (64bit). I have uninstalled iTunes and re-installed iTunes several times as it has constantly instructed me to do. It says that iTunes has been sucessfully installed; however, when I try to open iTunes, I keep getting the message "iTunes for Windows: Error 7 (windows error 127)".

Here is what it said....But every time I reinstall iTunes it says it was successful. I'm using Windows 8 (64 bit).

Backup with retention policy to recovery window of N days

Hello,
I've issued command to create database incremental backup with configuration:
run
configure retention policy to recovery window of 14 days;
backup incremental level 1 cumulative
tag daily_incr_14_days
database
plus archivelog delete all input;
All parameters are set to their default values and database backups goes to FRA. I've got recovery catalog connected and all RC_ views at my disposal.
1) Is there any way to find out, what recovery window was used for backup from any command in rman or query from RC_ views or local database views (information from control file)?
2) If I use other recovery window setting with configure command what would rman crosscheck or report commands do?
BR
Patrycjusz.

TenakaKhan wrote:
Mahir,
thanks for answer - this means that recovery window should be used mainly for maintenance purposes (crosscheck, delete obsolete, report need backup etc.) and it's not related to actual retention period with backup pieces like 'keep until' clause for backup ... database command (this information are saved with backup as I could check in rc_backup_set view from recovery catalog)?
Yes it is.
Maintaining RMAN Backups and Repository&nbsp;Records
keepOption
backup retention policy
A user-defined policy for determining how long backups and archived logs must be retained for media recovery. You can define a retention policy in terms of backup redundancy or a recovery window.
RMAN retains the data file backups required to satisfy the current retention policy, and any archived redo logs required for complete recovery of those data file backups.
recovery window
A recovery window is one type of RMAN backup retention policy, in which the DBA specifies a period of time and RMAN ensures retention of backups and archived redo logs required for point-in-time recovery to any time during the recovery window.
The interval always ends with the current time and extends back in time for the number of days specified by the user. For example, if the retention policy is set for a recovery window of seven days, and the current time is 11:00 AM on Tuesday,
RMAN retains the backups required to allow point-in-time recovery back to 11:00 AM on the previous Tuesday.
Regards
Mahir M. Quluzade

Consistent windows errors and installation issues with win 7

I am experiencing repeated blue screen errors (bad pool error and failed to clock interrupt among others) and now have issues with enabling windows firewall (error 8007042c) among various other windows errors also windows restore is not working would appreciate
any advice thank you.

Hi,
Please refer to this KB to troubleshoot the windows firewall (error 8007042c), begin with scanning for malware.
http://support.microsoft.com/kb/2530126
Regarding to the blue screen, I sugegst you keep Windows up-to-date, install latest drivers, if this doesn't help, please upload the latest dump files to a public location like OneDrive, then paste the downlaod link here for further analysis. (default location:
%SystemRoot%\MEMORY.DMP or minidump)
http://windows.microsoft.com/en-in/onedrive/share-file-folder
Yolanda Zhu
TechNet Community Support

Windows Error Recovery Windows 7

Similar Messages

Maybe you are looking for