Windows error when exporting sequence to movie

I have a project (Adobe Premiere CS3 - Matrox RT.X2 LE card - Windows XP SP3) with several sequences. I have exported to movie almost all the sequences without problems. But there´s one sequence that when I try to export, when rendering (compiling process), suddenly pop´s up a Windows error saying the program encoutered a problem and will be shut down.
I cannot figure out why is this happening. Any help?

This ARTICLE might help you gather some "clues," as to what is happening, when PrPro shuts down.
However, I feel that Harm has the answer with the Matrox card.
Good luck,
Hunt

Similar Messages

Getting Export Controller Error When Exporting MPEG2 to High boardband & up

I just got QuickTime Pro and MPEG 2 Playback for Windows. I am getting an Export Controller Error When Exporting MPEG2 to High boardband or to the default settings. The file I am exporting is around 60 MB and when it gets to about 15%, the program errors. However, the program works for Medium and low Board band. If anybody has a solution for my problem, I would love to know.
Thanks!

Not sure if this is going to work, but it worked for me. After exporting the movie and I got the error, I noticed that the process "exportController" was still running, so I stopped it from the task manager and am not sure but apperantly that was the problem because once I did that the file open up fine in other players like Winamp. Also after stopping the process the following exports I did seemed to be exported fine without any errors !... worth a shot.

Error when exporting reports using MAPI

We created a .NET class that wraps CR 2010 .NET Crystal Reports functions and made it COM visible. This class is used to create a COM object in a js script which in turn used to export reports to a PDF file with the destination MAPI.
It exports reports just fine without any errors however if prior to instantiation the exporting class we instantiate a class that has nothing to do with the Crystal Reports functions, our exporting object throws u201CExternal component has thrown an exception.u201D error when exporting. It appears that it has something to do with the SideBySide feature. I was wondering if somebody knows what causes this and if there is a way to fix this problem.
Thanks for your help!
 
 
Below are 2 procmon.exe outputs, the first when exporting works and the second when it doesnu2019t
 
 
 
1) Procmon.exe output when exporting works fine
 
 
 HKLM\Software\Wow6432Node\Microsoft\Windows\CurrentVersion SUCCESS Desired Access: Read
 HKLM\SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion SUCCESS KeySetInformationClass: KeySetHandleTagsInformation, Length: 0
 HKLM\SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion\CommonFilesDir SUCCESS Type: REG_SZ, Length: 72, Data: C:\Program Files (x86)\Common Files
 HKLM\SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion SUCCESS
 C:\Program Files (x86)\Common Files\microsoft shared\OFFICE12\MSO.DLL FAST IO DISALLOWED
 C:\Program Files (x86)\Common Files\microsoft shared\OFFICE12\MSO.DLL SUCCESS Desired Access: Read Attributes, Disposition: Open, Options: Open Reparse Point, Attributes: n/a, ShareMode: Read, Write, Delete, AllocationSize: n/a, OpenResult: Opened
 7:16:30.7403615 AM test.exe 4396 FASTIO_QUERY_INFORMATION C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS Type: QueryBasicInformationFile, CreationTime: 9/17/2010 10:50:22 AM, LastAccessTime: 11/10/2010 5:47:02 PM, LastWriteTime: 9/17/2010 10:50:22 AM, ChangeTime: 2/17/2011 11:04:53 AM, FileAttributes: A
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
 C:\Program Files (x86)\Common Files\microsoft shared\OFFICE12\MSO.DLL SUCCESS Desired Access: Read Data/List Directory, Execute/Traverse, Synchronize, Disposition: Open, Options: Synchronous IO Non-Alert, Non-Directory File, Attributes: n/a, ShareMode: Read, Delete, AllocationSize: n/a, OpenResult: Opened
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL FILE LOCKED WITH ONLY READERS SyncType: SyncTypeCreateSection, PageProtection:
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS SyncType: SyncTypeOther
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
 C:\Program Files (x86)\Common Files\microsoft shared\OFFICE12\MSO.DLL SUCCESS Image Base: 0x79260000, Image Size: 0x1073000
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS Type: QueryNameInformationFile, Name: \Program Files (x86)\Common Files\microsoft shared\OFFICE12\MSO.DLL
 C:\Program Files (x86)\Common Files\microsoft shared\OFFICE12\MSO.DLL SUCCESS Desired Access: Generic Read, Disposition: Open, Options: Synchronous IO Non-Alert, Attributes: n/a, ShareMode: Read, Write, Delete, AllocationSize: n/a, OpenResult: Opened
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
 HKLM\Software\Wow6432Node\Microsoft\Windows\CurrentVersion\SideBySide SUCCESS Desired Access: Read
 HKLM\SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion\SideBySide SUCCESS KeySetInformationClass: KeySetHandleTagsInformation, Length: 0
 HKLM\SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion\SideBySide\PreferExternalManifest NAME NOT FOUND Length: 20
 HKLM\SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion\SideBySide SUCCESS
 C:\Program Files (x86)\Common Files\microsoft shared\OFFICE12\MSO.DLL SUCCESS Desired Access: Generic Read, Disposition: Open, Options: Synchronous IO Non-Alert, Non-Directory File, Attributes: n/a, ShareMode: Read, Delete, AllocationSize: n/a, OpenResult: Opened
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS Type: QueryBasicInformationFile, CreationTime: 9/17/2010 10:50:22 AM, LastAccessTime: 11/10/2010 5:47:02 PM, LastWriteTime: 9/17/2010 10:50:22 AM, ChangeTime: 2/17/2011 11:04:53 AM, FileAttributes: A
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
 
 
 //////////////////////////////////////////////////////////////////////
 2) Procmon.exe output when exporting doesnu2019t work, notice that it tries to open MSO.dll at the same location as in the output above but fails, it tries then to open it at several other locations and fails
 
 
 HKLM\Software\Wow6432Node\Microsoft\Windows\CurrentVersion SUCCESS Desired Access: Read
 HKLM\SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion SUCCESS KeySetInformationClass: KeySetHandleTagsInformation, Length: 0
 HKLM\SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion\CommonFilesDir SUCCESS Type: REG_SZ, Length: 72, Data: C:\Program Files (x86)\Common Files
 HKLM\SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion SUCCESS
 C:\Program Files (x86)\Common Files\microsoft shared\OFFICE12\MSO.DLL FAST IO DISALLOWED
 C:\Program Files (x86)\Common Files\microsoft shared\OFFICE12\MSO.DLL SUCCESS Desired Access: Read Attributes, Disposition: Open, Options: Open Reparse Point, Attributes: n/a, ShareMode: Read, Write, Delete, AllocationSize: n/a, OpenResult: Opened
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS Type: QueryBasicInformationFile, CreationTime: 9/17/2010 10:50:22 AM, LastAccessTime: 11/10/2010 5:47:02 PM, LastWriteTime: 9/17/2010 10:50:22 AM, ChangeTime: 2/17/2011 11:04:53 AM, FileAttributes: A
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
 C:\Program Files (x86)\Common Files\microsoft shared\OFFICE12\MSO.DLL SUCCESS Desired Access: Read Data/List Directory, Execute/Traverse, Synchronize, Disposition: Open, Options: Synchronous IO Non-Alert, Non-Directory File, Attributes: n/a, ShareMode: Read, Delete, AllocationSize: n/a, OpenResult: Opened
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL FILE LOCKED WITH ONLY READERS SyncType: SyncTypeCreateSection, PageProtection:
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS SyncType: SyncTypeOther
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
 C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE12\MSO.DLL SUCCESS
 C:\Users\Paul\projects\temp\test\Debug\MSO.dll FAST IO DISALLOWED
 C:\Users\Paul\projects\temp\test\Debug\MSO.dll NAME NOT FOUND Desired Access: Read Attributes, Disposition: Open, Options: Open Reparse Point, Attributes: n/a, ShareMode: Read, Write, Delete, AllocationSize: n/a
 C:\Program Files (x86)\Microsoft Office\Office12\MSO.dll FAST IO DISALLOWED
 C:\Program Files (x86)\Microsoft Office\Office12\MSO.dll NAME NOT FOUND Desired Access: Read Attributes, Disposition: Open, Options: Open Reparse Point, Attributes: n/a, ShareMode: Read, Write, Delete, AllocationSize: n/a
 C:\Windows\SysWOW64\MSO.dll FAST IO DISALLOWED
 C:\Windows\SysWOW64\MSO.dll NAME NOT FOUND Desired Access: Read Attributes, Disposition: Open, Options: Open Reparse Point, Attributes: n/a, ShareMode: Read, Write, Delete, AllocationSize: n/a
 C:\Windows\system\MSO.dll FAST IO DISALLOWED
 C:\Windows\system\MSO.dll NAME NOT FOUND Desired Access: Read Attributes, Disposition: Open, Options: Open Reparse Point, Attributes: n/a, ShareMode: Read, Write, Delete, AllocationSize: n/a
 C:\Windows\MSO.dll FAST IO DISALLOWED
 C:\Windows\MSO.dll NAME NOT FOUND Desired Access: Read Attributes, Disposition: Open, Options: Open Reparse Point, Attributes: n/a, ShareMode: Read, Write, Delete, AllocationSize: n/a

I tried to run exporting code in a .net application and got the same error. I first created the COM object that causes the problem and then ran exporting CR functions. It works fine if I run the code without creating the COM object.
Below is the code I used.
 Type objClassType = Type.GetTypeFromProgID("ebms.main");
 object objMain = Activator.CreateInstance(objClassType);
 try
 object[] p = new object[4];
 p[0] = "C:\\ebms\\co1";
 p[1] = "C:\\ebms\\co1";
 p[2] = "Administrator";
 p[3] = "";
 objClassType.InvokeMember("LoginToCompany", System.Reflection.BindingFlags.InvokeMethod, null, objMain, p);
 catch (Exception ex)
 this.RPTDoc = new ReportDocument();
 this.RPTDoc.Load(@"C:\\Users\\Paul\\Desktop\\AR Customer List.rpt");
 PdfRtfWordFormatOptions pdfOpts = ExportOptions.CreatePdfRtfWordFormatOptions();
 MicrosoftMailDestinationOptions mailOpts = ExportOptions.CreateMicrosoftMailDestinationOptions();
 ExportOptions exportOpts = new ExportOptions();
 pdfOpts.UsePageRange = false;
 exportOpts.ExportFormatOptions = pdfOpts;
 mailOpts.MailMessage = "something";
 mailOpts.MailSubject = "something";
 mailOpts.MailToList = "emailaddress";
 exportOpts.ExportDestinationOptions = mailOpts;
 exportOpts.ExportDestinationType = ExportDestinationType.MicrosoftMail;
 exportOpts.ExportFormatType = ExportFormatType.PortableDocFormat;
 try
 this.RPTDoc.Export(exportOpts);
 catch (Exception ex)
 MessageBox.Show(ex.Message, "Error", MessageBoxButtons.OK, MessageBoxIcon.Error);

Error when exporting to flat file in ODI 11g

This works ok in ODI 10g. I'm using IKM SQL to File Append on Windows Server 2008 R2
Getting the following error when exporting to a flat file in ODI 11g: ODI-40406: Bytes are too big for array
I've seen a couple of threads like this on the forum, but I've never seen an answer to the problem.

Problem is with the difference in behaviour for the IKM SQL to File Append KM between 10g and 11g.
Our 10g target file datastore had a mixture of fixed string and numeric columns. Mapping from the source to target was simple one to one column mapping. It generated the desired fixed format flat file; numerics were right adjusted with embedded decimal point and leading spaces. Each numeric column in the generated flat file occupied the exact space allocated to it in the layout. This gave the desired results, even though documentation for the 10g IKM states that all columns in the target must be string.
When we converted to 11g and tried to run this interface, it generated an error on the "numeric" columns because it was wrapping them in quotation marks. The result column was being treated as string, and it was larger than the defined target once it acquired those quotation marks.
In order to get 11g to work, I had to change all the numeric columns in the target data store to fixedstring 30. I then had to change the mapping for these numeric columns to convert them to right adjusted character strings (i.e. RIGHT(SPACE(30) + RTRIM(MyNumericColumn),30).
Now it works.

Unknown error when exporting 32-bit 5.1 wav audio

I get the ever useful "Unknown error" when exporting the audio from Premiere Pro CS6 to a 32-bit, 5.1 channel uncompressed WAV file most of the time. I was able to get it to work just fine by pasting the audio to a new project, but that isn't working anymore. I get the same error when I change it to 24-bit audio. However, when I change to 16-bit sound it works fine.
First, is there a real audible difference between 16- and 32-bit when it's all going through a WAV to AC3 converter? The AC3 files get dumped into Encore as the audio track so that I can get 5.1 sound on blu-rays instead of Encore re-encoding things.
Second, what would cause it suddenly not work, and how can I get it working again?

That error can happen for many reasons...one of the reasons that I occassionaly get it is because I try exporting a movie to an external drive that has been formated in the old FAT32 instead of the NTSF standard. FAT32 only allows for file sizes up to 2 gigs. And as soon as it reaches that...I would get that error. I don't know if that is why you are getting that error...but it would be easy to check. 1) are you generating a file that is over 2 gigs? 2) is your drive that you are exporting to FAT 32 (just right click the drive in My Computer and select "properties" then just look for what it says next to "file system".

Error when exporting video

Hi,
Got this error when exporting video. Tried to export in different formats but same error pops up.
Any solution to this problem would be greatly appreciated. I have PreProCS5
Thanks
Shiva

Similar as the last post.. copy and paste.
Found a simple solution;
In Iphoto, select the movie; right click on the movie and select "copy; right click on your desktop or other folder in Finder and then select "paste Item";
The movie will be copied to that location in its original format.
Easy solution until Apple fixes the export movie issue.

Sound drop out when exporting to Quicktime movie.

One track of three sound tracks drops out after a few seconds then reappears a few seconds later when exporting to QT Movie. The project functions perfectly when printing to video. Am using QT 7.1.3 FCE HD 3

Hi(Bonjour)!
Try to make an "audio-mixdown" of your final sequence
in timeline.
Michel Boissonneault
Thanks for the info. I managed to overcome the problem initially by copying onto miniDV then re-capturing and exporting the result., but Mix Down is much nicer.
However, prior to upgrading to FCE-HD, I am fairly certain I have made more complex projects with no problems. Now quite frequently I get a message suggesting I reduce the number of RT tracks, or increase the speed of my computer. Is there something in FCE HD that requires these modifications, or have I a rogue project.
Does anyone know what is the actual difference between High Medium & Low qualities with Audio & Video?
Thanks
Roy

'file could not be written due to an error' when exporting jpg

I'm working with an Illustrator file in CS2 and after a certain point it has started saying 'the file could not be written due to an error' when exporting to a jpg.
i've tried a couple things like deleting layers and although the file is much smaller, it still says the same error when exporting.
at its highest it was 130mb as an illustrator file and jpgs were 2-5mb.
i''ve tried copying some of the layers into a new file but the error report still comes when i'm exporting.
i have vector and raster based data in the file and tried turning off/deleting either of the layers and there is no difference.
i don't understand why it's started doing this because before it had no problem at all exporting before.
ANY IDEAS ANYONE? I'm trying not to have to reproduce days of work to remake the file.
many thanks,
P

Mylenium,
Sounds like you know a good deal about this product. Is there any way to restore a color profile/setting to an earlier point?
I don't recall changing it and to tell you the truth, wouldn't be able to say which it may have been set to before - if different.
Thanks,
Paul

Error when exporting file from LR5.2 - file created

After updating to LR5.2, I receive an error when exporting files to another disk drive. a file is created, but a warning appears "Unable to Export: "An internal error has occurred: Win32 API error 2 ("The system cannot find the file specified.") when calling ShellExecuteExW from AgWorkspace.shellExecute". I also have CC iunstalled for other applications, but originally installed LR5 as a standalone Adobe application. I tried removing the program and reinstalling through CC, with no change in this behavior.

The answer is in the thread:
http://forums.adobe.com/thread/1303578?tstart=0

Error when exporting a pdf in SAP

She sends me the error when exporting a pdf from the SAP system, this is the message:
X Object reference not set to an instance of an object.
I hope I can support.
Annex image

See your other thread.

Windows error when starting iTunes 5.

Hey.
My iTunes suddenly started giving me a Windows error when starting it. I installed iTunes 5 instead of iTunes 4 recently, and it has been running. But today when I wanted to transfer some more music to my iPod iTunes wouldn't start. I just get the Windows Error... thing. What can I do? I already tried to reinstall it, but as you know, it's god d*mn impossible to completely delete Apple software without a format.
I talked to a friend of mine who had experienced the same problem, but it was his firewall/antivirus (F-Secure) that was the problem, and I'm running PC-Cillin - which I tried to disable, but it didn't help.
Help, thank you.

Deffo a missing quicktime issue. See my post Chris Rocco, "itunes launching problem.", 07:20am Oct 2, 2005 CDT
Itunes relies for some unknown reason on compression technologies in quicktime libraries. Crazy! No more quicktime alternative!

In aperture 3.4.5, I get unsupported file error when exporting version of photo I've edited using plugins?

In aperture 3.4.5, I get unsupported file error when exporting version of photo I've edited using plugins. I have try reinstalling aperture three times, deleting plists a few times, reinstalling plugins, restarting my MacBook Pro many times. Everything I've tried may fix the problem for a very short while and I can export a few photos before it returns. The problem happens with topaz and photomatrix pro plugins after I edited and try to export version.

I had the same problem with the Photomatix plug-in and this solved it for me. I realised it only happened with Photomatix and not other plug-ins so I checked where the plug-ins were installed. The Photomatix plug-in was installed in
~/Library/Application Support/Aperture/Plug-Ins/
where ~ is the home location for the current user account. All the other plug-ins however were installed in
Macintosh HD/Library/Application Support/Aperture/Plug-Ins/
which is the location that makes them available to all user accounts on your Mac. Moving the Photomatix plug-in to this location solved the problem for me.
Note that the Library directory under the first location is normally hidden, to get to it hold down the Option (Alt) key and select it from the Finder Go menu.

Get 'Generic Error' when attempting to import .mov files with transparency?

I get the 'Generic Error' when attempting to import .mov files with transparency? I'm trying to use mattes with an alpha channel but I cannot import them. I have had this same issue since cs6, now I have it with cc 2014? Any clues would be most appreciated.
I have uninstalled the DVCPro Codec, but it didn't help.
I have tried converting the .mov file (which is now automatic in Yosemite) and this creates a ProRes4444 Codec, Again no luck with import.
I've seen this issue on the web, but never a solution? Anyone?

Hi Terence,
I tried iPhoto Library Manager but it could not solve my problem. Opening the iPhoto library I can see that the reference to the pictures are pointing to my old location not to the new one. I considered running a script that would change all pointers since this is basically what is needed (in my case from /Volumes/RAID1/Fotos/XXX to /Volumes/Fotos/XXX). Instead I inserted a soft unix link to make to connection but that did not work. It is referring to the airport disk by the airport name rather than the mounted disk name. Very strange indeed. The problem is maybe not in iPhoto but in OSX? Anyway, maybe the only way out is to take some hours and manually run through all linked photos... cumbersome and annoying!
Regards,
Søren

8008 Error when trying to download movies from iTunes

I've searched Google and the discussion boards but no one seems to have a fix for the 8008 error when trying to download movies in iTunes. I have the latest version of iTunes, my Mac Mini is up to date with all of it's patches, I've tried deleting the movie in the download folder and redownload the movie but I still get nothing. Does anyone have any suggestions for a fix?
Thanks,

Morning pettis360,
Thanks for using Apple Support Communities.
For troubleshooting on this, take a look at this article:
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
"Error -50," "-5000," "8003," "8008," or "-42023"
These alerts occur due to timeouts or conflicts trying to write a file during download.
If you encounter this issue while while downloading something from the iTunes Store:
Delete your iTunes Downloads folder, located in:
Mac OS X:  ~/Music/iTunes/iTunes Media/Downloads Note: "iTunes Media" may appear as "iTunes Music. Also, the tilde (~) refers to your Home directory.
After locating your iTunes Downloads folder:
Quit iTunes.
Delete the Downloads folder on your computer.
Open iTunes.
Choose Store > Check for Available Downloads.
Enter your account name and password.
Hope this helps,
Mario

Window error when publishing Muse change, can't pubish page update

Window error when publishing Muse change, can't pubish page update. Any suggestions?
It happens after I updated my website payment page with a new Paypal html. That html is below with x's put in to the code. Why doesn't Muse or Windows like this code in Muse?
<script type="text/javascript" data-pp-pubid="9xxxxx6cec" data-pp-placementtype="540x200"> (function (d, t) {
"use strict";
var s = d.getElementsByTagName(t)[0], n = d.createElement(t);
n.src = "//paypal.adtag.where.com/merchant.js";
s.parentNode.insertBefore(n, s);
}(document, "script"));
</script>

Window error when publishing Muse change, can't pubish page update. Any suggestions?
It happens after I updated my website payment page with a new Paypal html. That html is below with x's put in to the code. Why doesn't Muse or Windows like this code in Muse?
<script type="text/javascript" data-pp-pubid="9xxxxx6cec" data-pp-placementtype="540x200"> (function (d, t) {
"use strict";
var s = d.getElementsByTagName(t)[0], n = d.createElement(t);
n.src = "//paypal.adtag.where.com/merchant.js";
s.parentNode.insertBefore(n, s);
}(document, "script"));
</script>

Windows error when exporting sequence to movie

Similar Messages

Maybe you are looking for