Windows Explorer doesn't display some files until I play or get info for them in iTunes.

Windows Explorer doesn't display some files until I play or get info for them in iTunes.
How do I get them to all show up in Explorer without playing them all one by one?

I think I solved the problem by going to File -> Library -> Organize Library

Similar Messages

  • After Upgrading Acrobat Reader XI to Acrobat XI Pro the previewer in Outlook and Windows Explorer doesn't work.  I have to set the default program for .pdf's to Acrobat Reader inorder for the previewer to work.

    After Upgrading Acrobat Reader XI to Acrobat XI Pro the previewer in Outlook and Windows Explorer doesn't work.  I have to set the default program for .pdf's to Acrobat Reader in order for the previewer to work.
    Can anyone recommend a solution?

    If I set the default program for viewing PDF as Acrobat XI Pro the a PDF file will open with Acrobat XI Pro, but in Outlook I will get a white screen and the information bubble "This file cannot be previewed because there is no previewer installed for it" and in Windows Explorer I get a white screen in the preview pane.
    My Acrobat version is 11.0.10
    I am running Windows 7 Professional with Service Pack 1
    My Internet Explorer is Version 11.0.9600.17691
    Update Versions 11.0.17 (KB3032359)
    I am running Microsoft Office 2013

  • Windows explorer doesn't recognize indd files

    I just recently upgraded from CS5 to CS5.5. Now I can't open Indesign files from Windows Explorer. I have tried to use the "open with" and Indesign is not an option and then when I browse to select Indesign.exe it defaults to the main "open with" dialogue box like it won't except Indesign CS5.5 as an option. I can however open the file within Indesign itself. This is VERY inconvenient. Any help would be really appreciated.
    WindowsXP, CS5.5
    -Jane

    Well the bad news is that your install is a little damaged. The best thing you can do is reinstall. I'd try first to do a "repair" which involves runningthe installer again without removing anything. Be sure you turn off any antivirus or malware scanners befor you run the installer, and it would be a good idea to stop instant messengers and iTunes as well.
    If that doesn't work, you'll need to uninstall and reinstall again clean. I personally would run the clean tool in between the uninstall and reinstall for good measure (Resolve installation problems with CS5 Cleaner Tool) I would allso run MSConfig before doing the reinstall and make sure you disable all non-essential startup programs and services, especially the ones mentioned above and any browser helpers or extra toolbars.

  • Windows explorer doesn't open LLB files.

    was running LV6, 6.1, now 7.0 on win98 machine.
    recently ran microsoft regclean and now I have no more support for
    viewing inside .LLB files through windows explorer. Attempting to
    re-enable this through LabVIEW/tools/options does not help.
    Any hints?
    thanks
    paul

    It appears that running regclean has busted this function by
    removing 7 entries from the system registry.
    Running ADD/REMOVE PROGRAMS/National Instruments/LabVIEW/repair,
    repaired the problem, and returned Windows Explorer support for LLB
    files, unfortunately it also removes the LabVIEW registration name and
    Ser#, but this can be easily found (and repaired) in ...
    HKEY_LOCAL_MACHINE
    SOFTWARE
    NATIONAL INSTRUMENTS
    LABVIEW
    7.0
    in the system registry and values typed in for Registered Owner & Serial
    Number fixes the 'unregistered' on the splash screen.
    back to the LLB Explorer support problem,
    What I actually did was to,
    1) run regclean to make sure there wasn't any crap in the registry.
    2) fix the LLB Explorer support
    problem by 'repairing' LabVIEW from the
    ADD/REMOVE PROGRAMS system function.
    3) run regclean
    4) rename the 'UNDOwhatever.REG' file (in regclean directory) to 'Fix
    LabVIEW LLB Support.reg'
    5) Finally, double click 'Fix LabVIEW LLB Support.reg' to put the data
    back into the system registry.
    In this way, if I ever run regclean again and it removes the LLB
    file support in Windows Explorer, all I have to do is run 'Fix LabVIEW
    LLB Support.reg' instead of repairing (re-installing) LabVIEW.
    I did this in on a Windows 98 system with LabVIEW 7.0. Your milage may
    vary with other platforms or applications.
    Paul wrote:
    > was running LV6, 6.1, now 7.0 on win98 machine.
    > recently ran microsoft regclean and now I have no more support for
    > viewing inside .LLB files through windows explorer. Attempting to
    > re-enable this through LabVIEW/tools/options does not help.
    > Any hints?
    > thanks
    > paul
    >

  • Some files won't play, while others just like them play fine

    A couple of weeks ago I purchased a 3rd gen iPod Nano 4gb...between it and iTunes, I was able to easily get up and running. iTunes pulled together all of my music -- some of which had come from iTunes, and some were protected files from other sources that it couldn't load...but the vast majority of the files are unprotected MPEG Layer 3 files.
    All of those files are seen by iTunes, displayed for me, and all of them play on my computer. A certain number of them I wanted on my iPod...so I checked the boxes and sync'ed the device. All but a handful of them play on the iPod. But here's the odd thing....those that won't/don't play are displayed on the iPod. It knows they're there. And I can scroll through them and select them...and the screen will even come up to indicate to me that they're about to play (with the song running time "thermometer" at the bottom)....they just won't start.
    I've tried de-selecting them from the iTunes list, sync-ing again to remove them, then re-selecting them and sync-ing again....with no change: they're displayed, they can be selected...they just won't play.
    Anyone have any idea what's going on?

    go to albums
    select all albums
    right click one (as this will be the same as right clicking all of them)
    go to the bottom of the pop up munu
    click "Check Selection"

  • Firefix doesn't display some kind of pictures

    Firefix doesn't display some kind of pictures in the google+. I've tried an advice from support but problem still exists (https://support.mozilla.org/en-US/kb/fix-problems-images-not-show).
    Other internet browser shows these pictures correct. It seems to me the problem concerns .bmp files
    as I unvestigated searching other browsers.

    If you use extensions (Firefox/Tools > Add-ons > Extensions) that can block content (e.g. Adblock Plus, NoScript, Flash Block, Ghostery) then make sure that such extensions aren't blocking content.
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
    *Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
    *Do NOT click the Reset button on the Safe Mode start window
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • Windows 7 doesn't display pdf properties

    Windows 7 doesn't display pdf properties/metadata, like title, comments, author, subject etc. This was a great feature in XP. Anybody know a workaround?

    On this site is explained how to display the pdf properties in windows 7 explorer.
    http://social.answers.microsoft.com/Forums/en-US/w7files/thread/203b60ca-b773-4931-85ad-a5 e67656d6ce
    steps:
    open the file explorer in windows7
    select libraries from the left navigation bar
    right click on the libraries heading.
    select "new" > "library"
    give the library a name e.g. "sales orders".
    press the button "include new folder" to select the folder where the pdf files are in. e.g. "D:\files\sales\orders\"
    select (top-right) "arange by" and select e.g. "name".
    you should now be able to see the pdf properties (don't forget to enable the subject etc. collums)
    See picture..
    Good luck!!

  • R-Click print from Windows Explorer doesn't print actual document size.

    We publish AutoCAD drawings to PDF routinely.  They are setup in 11x17 landscape format.  They are published (AutoCAD's way of printing multiple at once) to PDF in 11x17 landscape format.  When you open the file with Reader they are in 11x17 landscape format.  You can manually print them after opening from adobe reader in in 11x17 landscape format.  But, when you are in Windows Explorer, right click these PDF file(s) then click print, they are printed in 8.5x11 landscape format.
    How can we get these to print in the documents actual format?  We want to be able to R-Click the file(s) and print them from Windows Explorer without having to open Reader.

    Does anyone know how they can help me?  We could really use this.

  • After Udateing to IOS 5 my Windows Explorer doesn't see the photo folder on my iPhone

    I use my iPhone at work to take pictures and upload grab them off the phone folder.  I can charge my phone using the USB connection But I'm not allowed to install iTunes on my work computer and I do not wish to use iCloud at this time. Now that I've upgraded to IOS 5 Windows explorer doesn't see a folder for photots?!  How can I restore the ability to grab photo's off my phone using the Windows explorer?

    I can't see Calendars list (iPad-1)
    ...invitations/download button on the lower right.
    where this buton?
             Lower right.  The downward arrow pointing into the horizontal brackt that looks like
              this on its side:  ]

  • How do I find bad music files?  I have thousands of files, but some are bad.  When I try to load them into iTunes, it just spins.  I need a routine to identify and remove the bad files.  Any ideas?

    How do I find bad music files?  I have thousands of files, but some are bad.  When I try to load them into iTunes, it just spins.  I need a routine to identify and remove the bad files.  Any ideas?

    Hi ajoddo20,
    Welcome to the Apple Support Communities!
    You can use Home Sharing to import music and other media from one computer to another. Please use the instructions and information located in the attached article for information on how to complete the process. 
    iTunes 11 for Mac: Use Home Sharing to import items from another iTunes library
    Cheers,
    Joe 

  • "Installer could not install some files in "/". Contact the software manufacturer for assistance."

    What does THAT mean!!! Appears when trying to download the new Itunes!!!
    Any ideas??
    "Installer could not install some files in "/". Contact the software manufacturer for assistance." ?????????????????????

    can someone please help!!! I can't install anything on my mac!!! And my iphone isnt even showing up in itunes when i plug it in!

  • A mov file plays in 'Get Info' preview, but not in Quicktime

    I recorded a talk to web cam yesterday using Quicktime Pro and edited out the overlong pauses and fluffs to produce a series of .mov clips. Today I copied and pasted the clips into one .mov file in Quicktime Pro. The first 12 clips were fine.
    The 13th clip opened as if it was audio only, but when played did not give any sound. An examination of the movie properties window showed about 3 minutes of audio and video, but neither were selected and could not be selected. When I tried to extract the video thinking I could then reassemble the file, I got a message saying that one of my raw clips was missing. The file was saved as self-contained and is about 7 MBytes. When it opens with the appearance of an audio file the last part of the clip I pasted in is highlighted as if selected; this corresponds to the file it is asking for.
    Now I had deleted my raw data as my hard drive is nearly full and I was getting warnings to that effect. But as the files had been saved as self-contained rather than reference, this should surely not be a problem.
    The strange thing is that if I select the .mov file and do a 'get info' then I can play the audio and video perfectly in the 'get info' preview plan, up until that final part corresponding to the missing file.
    It looks like I have to do the last bit once more, but how can I keep the rest of it? I've tried deleting the final part and re-saving, but it still opens with the appearance of an audio file (which is silent when I play it). I can at least listen to what I said in the first recording, but it would be good to be able to keep the part that plays in 'get info'.
    Any ideas of how I can get to it?
    Any ideas.

    Solution found.
    I simply created a new .mov file and changed its name to the raw file that Quicktime told me was missing when I tried to open my edited clip.
    The edited clip now opens and I've been able to delete the final portion (which appears selected when the clip opens) and save the rest, which plays fine.
    This seems to have been a problem because in this particular clip I left the final portion I pasted in selected when I saved the file, even though I saved is as self-contained, not a reference file.

  • When I input song information into "get info" for each of my songs, some do not save when I close my Itunes. When I click on the song the correct info pops back up.Why?

    When I input song information into "get info" for each of my songs, some do not save when I close my Itunes. When I click on the song the correct info pops back up.Why?

    I ran into the same problem, I think that, If you tab on a song that is on your IPOD, and the song data is grayed-out, I think it means that the song is probably twice on your IPOD and that the iTunes directory can not edit THAT song data for two (or more) files @once. Check if this is the case, sinceI have the same problem,am looking for a way to have One and the same song in more playlists but only keep the song once on the IPOD.

  • Available Space in 'Get Info' for HDD does not match with the files

    I have a 75G HDD on this Macbook. The 'Get Info' for the HDD says I only have 1G of space available. However, when I go item by item in the HDD, and total the sizes myself, it only totals to 30G of space being used.
    Anyone heard of this problem before? Are there files hiding somewhere? How can I get more useful space on this HDD?

    Hi and welcome to Discussions,
    use something like Disk Inventory; JDisk Report or OmniDisk Sweeper to really find out what is consuming your disk space.
    http://www.macupdate.com/info.php/id/20598/jdiskreport
    http://www.macupdate.com/info.php/id/14393/disk-inventory-x
    http://www.macupdate.com/info.php/id/7402/omnidisksweeper
    OSX hides quite a lot of system files from the user for the sake of safety.
    What to delete and what not is your choice.
    Regards
    Stefan

  • Why can't I change the content for some songs when I click the Get Info button?

    Why can't I change the content for some songs when I click the Get Info button?  The information on the song, artist, genre is grayed out and will not allow me to alter the information.

    Hi htechadmin,
    Revcevied your PM and noted all details, Many Thanks.
    Getting this addressed by the team, either they will reply to you, here, or they shall email Or Call you.
    Regards,
    LP

Maybe you are looking for

  • What is the link between PO and Requisition in database side

    hello friends, please can any one tell me that what is the link between PO and Requisition in database side. means after creating the requisition we will go for create the PO based on that requisition. want to know that what is the link between both

  • Deleting line item from sales order

    Hi to All, I am an SD support consultant,i had an issue please help me out, When i am trying to delete one line item from the sales order i am getting error message that line item cannot be deleted because of planned order.

  • FPY1 Payment medium

    Hi gurus.. I created 3 function modules.  These are called thru the payment medium that I configured to be used in FPY1.  How can I debug FPY1 so that it will stop in the 3 function modules that I created?  I tried to put breakpoint or use DBUG but i

  • Arranging function definitions in Designer

    1.How can I arrange PL/SQL functions in generated scripts that called function come first and calling function in the next? Without this arrangement, during creating PL/SQL functions errors appear on the screen as the following: Errors for FUNCTION G

  • MWA: Issue while capturing the values entered, before displaying the LOV

    I have created a LOV in Mobile Web Application using PL/SQL procedure. I'm not able to get the values entered by the user before displaying the List of values. I need the values entered to pass it to the query. There might be a seeded event or method