Windows Explorer "My Computer" opens on boot after Acrobat Standard 9.2 install

Windows Explorer "My Computer" opens on boot - windows 7 on Lenovo Z580 - after Acrobat Standard 9.2 install. If I uninstall Acrobat Standard 9.2, the issue goes away. I've updated the software. Do I need Acrobat X?

hello friends
finally i have found a perfect solution for this error
even i was facing same problem i am too using lenovo z580 with windows 7 home premium 64 bit
i have purchased adodbe cs6 master collection
my computer pop ups during startup
solution is
first do one key recovery of your laptop then update all windows updates and drivers
then install adobe setup which you have
then restart pc or laptop
you are facing error now my computer pop up
close it
and install ccleaner and go to statup items in it and delete adobe bridge and remove all adobe at startup except adobe arm
now again restart you pc error will still come dont worry close it
and now install advanced registry clear trial is available and pro also if you can purchase
now clear it with it by scanning it and scan and clear until you dont get all solved error.
now restart your laptop or pc
my computer explorer will not pop up and startup will also not take more time.
thank you
viren
do reply if anyone needs help in this matter
adobe technical support his not at all helpful in this matter
adobe setup is not compatible and having issue in windows 64 bit
not only lenovo users samsung and hp users are also having same issue.
adobe is not responding in this issue except taking troubleshooting steps

Similar Messages

Windows 8: Make PDFs open by default in Acrobat Standard or Pro instead of Reader

In a Windows 8 environment, how can you set set all PDFs to open in Acrobat Standard or Professional instead of Reader? I've tried right-clicking on a PDF in Windows Explorer, selecting Properties, then changing the default app from Reader to Professional. Although it seems to work (does not generate an error), PDFs continue to open in Reader. Surely there is a way to change this. I've spent about 15 minutes Googling this, but was surprised I could find no solution.

PDF Ownership when Reader X is Installed with Acrobat
The steps have not changed across versions.
hth,
Ben

MEGA 865 Computer doesn't boot after flashed.

my problem is .. :
Update My Mother Board Bios and dawnload a file from this site
a file is (AWFL833D.EXE W6797IMS.130 ) for update my mother board Bios
when update completed Restart a Computer ... and here a problem
my Computer doesn't boot after flashed.
i read a (How to flash the BIOS.doc) file and executing a instructions and i am fail.
when i read a (How to flash the BIOS.doc) file i found a Write:
If your system doesn't boot after you flashed, please refer to the BIOS recovery method as described.
i changed a Mother Board clear CMOS jumpers for clearing ,
and not success and the problem is until stay.
i want a solution please.
thanks.

Does your computer do or show any error mesages on the screen when rebooted. You did do this in DOS didn't you?

What is the newest version of Adobe Acrobat Standard that runs on Windows XP SP3? I currently have Adobe Acrobat Standard 6.0.0. Thanks!

What is the newest version of Adobe Acrobat Standard that runs on Windows XP SP3? I currently have Adobe Acrobat Standard 6.0.0. Thanks!

The current updates 10.1.13 and 11.0.10 no longer support Windows XP SP3. The last versions to test were 10.1.10 and 11.0.3 I think. But I wouldn't recommend using those because of the Security Updates in between those versions and the current updates. Microsoft doesn't even support Windows XP SP3 any longer. I would say to try updating both the OS and the applications.

Windows explorer keeps computing items after accessing a mapped network drive

Our organization has decided to upgrade to windows 7 but we are running into a problem with windows explorer green progress bar hanging after accessing a mapped network drive. When you try to go back to computer or access the control panel after going
3 or more folders deep into the mapped drive, windows explorer just keeps searching.
When you expand the arrow in the address bar it states that it is computing items and never stops.
The only way around this is to right click on libraries and select reset back to defaults and everything is back to normal.
We are deploying this image of windows 7 to over a 1000 computers and we cannot have this problem lingering, does anyone have a solution to resolve this issue. This does not happen in Windows XP.
We have tried to turn off windows search and remote differential compression and this does work but the problem is that you lose all search capabilities in windows. So windows search needs to be enabled. We also tried to adjust the MTU, change GP settings,
and nothing seems to work except to turn windows search off or reset libraries back to default.
We also did some research online and there are so many people experiencing the same problem, with no resolution expect they have to go back to Windows XP. That is not an option for us.
Please help us we would really greatly appreciate it.

Hi,
The issue could be related to searching and indexing feature in Windows 7. I suggest rebuilding the indexing files.
Click Start -> Type
indexing options in the search box -> Advanced -> Index Settings tab-> Rebuild buttion.
For more information, you can refer to:
http://windows.microsoft.com/en-us/windows7/Change-advanced-indexing-options
If the issue persists, you can perform the following troubleshooting steps.
1. Go to update your network adapter drivers and BIOS from manufacture's site manually.
2. If any router is involved, please update the firmware.
3. Perform a System File Checker.
http://support.microsoft.com/kb/929833
Best Regards,
Niki
Please remember to click "Mark as Answer" on the post that helps you, and to click "Unmark as Answer" if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Computer won't boot after windows 7 install.... :( [Solved]

I have 2 hard drives. The first drive is my main arch linux install. The second drive I use to install various operating systems. My school was selling windows7 for $30...I couldn't resist the cheap price...now I'm paying for it ><
I unplugged the hard drive with my arch linux install from my computer. (sda) Then installed windows 7 on the second hard drive. I reattached the first hard drive to my computer. (this was so i could avoid having to re-install grub)
My computer would not boot. I decided to install linux mint -- something I was going to do anyway -- that way I could boot into arch linux and fix things. Mint installed fine. But my computer STILL won't boot. I get grub error 22. What's up with that? Is this something to do with windows7?
Hard Drives:
/dev/sda1 ext2 /boot 100 MB
/dev/sda2 extended
/dev/sda5 ext3 arch / 130 GB
/dev/sda3 ext3 arch /home 166 GB
/dev/sda4 swap 1.72 GB
/dev/sdb1 ntfs windows7 65 GB
/dev/sdb4 ext3 mint / 19GB
/dev/sdb2 swap 1GB
/dev/sdb3 ext3 media 900 GB
Should I install grub to the MBR?
I checked to make sure that nothing in my arch linux install was erased using the arch install cd... I really need to get this fixed before classes on monday so any help would be appreciated.
Last edited by Meskarune (2009-10-31 04:26:39)

Xyne wrote:Then again, when you buy Windows, I suppose you're looking for the authentic Windows experience.
I was going to say, even at $30 you still managed to get the full windows experience at first boot!
Meskarune wrote:PS. I heard that windows will override the MBR when it updates... so consequently it is bad to install grub to the MBR in a dual boot system. Will I have to be reinstalling grub all the time?
God i hope not. just stay away from windows if that happens
just thinking about tihs is giving me headaches.
Last edited by toxygen (2009-10-31 03:06:12)

Windows Explorer Refuses to Open Folders In Same Window

I have Windows Vista Ultimate SP1. Under Organize->Folder and Search Options->Browse folders I have the radio button, "Open each folder in the same window" checked. However, Vista refuses to do so and opens each folder in its own window. This does not work well for me because I end up with tons of open windows and its a pain to close them. This behaviour just started. Yesterday it did not do this. This is a fresh install with only Visual Studio 2005, Visual Studio 2008, SQL Server 2005, Expression Studio 2, Adobe CS3 and InstallAware installed.
Also worth noting is that if I right click on a folder, the default action of Open is in bold. If I click it then it will open the folder in the same window. However, every time I double click it opens a new window.
Please help as I really don't want to have to switch to a third party file management tool over this.
Thanks!

Guys,
This problem has been driving me nuts for weeks now. I've cruised this and several other forums, and tried every damn "fix" out there.
WINDOWS 7 HOME PREMIUM (All updates applied)
I've done registry edits, registered .dll files, changed folder option settings back and forth, uninstalled software, re-installed software, etc, etc.. Ad nauseam. (I
don't have IE8 or Source Gear Vault) Although both of these seem to come up often in these discussions.
I bumbled into something on one these forums, and ** I FOUND THE SOLUTION!**
It is very easy to do
Presumably SAFE (It comes from Microsoft)
I suggest you bookmark this site for future use. (I did, and plan on using it for some of my clients computers
when having weird problems)
Go to this web site: http://support.microsoft.com/fixit/
Then, in section 2 click on "Use desktop features, or open programs and files"
In the window below will be a list of solutions. Simply "Run Now" the one called : Diagnose and repair Windows File and Folder Problems automatically
After running the "fixit" my problem of a new window opening all the time in Windows Explorer went away! Worked perfect!
Ps. In my Browser rather than running when I clicked "Run", it downloaded the file. So I ran it locally. No big deal, they suggest doing that anyway if you need the file to run on a computer that is not online. When I ran the program I chose
the second option, which is to NOT fix the problem automatically, but to see a list of repair options first. (rather than choosing to repair automatically)
My results were two things:
Rebuild my icon cache (didn't really have troubles with that anyway)
Repair folder options
I decided to let it "fix" both problems, even though I haven't had any problems with icons. After the program finished (about 20 sec) I checked and no longer had the problem of a new window opening in explorer, however the acid test was going to be will
it continue to work properly after I re-boot. Guess what? PROBLEM WAS FINALLY SOLVED!
Anyway, I hope this works for any of you guys too. I see that "some" of these other solutions worked for some of you, but none of them worked for me until I ran the "FIXIT" program from Microsoft. There is also a
ton of other AUTOMATIC FIXIT's on the site for various other computer problems. I hope they all work as well as this one did! (I'll try to post this in some of the other forums, but feel free to do so yourself)
Good luck everyone.....
Mark

Windows 8.1 Pro will not boot after clean install!

Hello all recently went from a Win7pro to Win8.1pro I did a clean install and formatted my HDD just last night. Woke up this morning my machine was turned off I had let it stay on this night as I was installing updates for it. So i turned on the computer
and got nothing let it sit for about 30 min and still got nothing and but nothing im talking just a blank screen. I then did a "hard shutdown(just pressed power button till it turned off the computer)" When I tried to turn it back on again this time
i got the ASUS Sabertooth X58 splash screen to enter bios or load boot devices so was kinda excited. However if i try to enter this BIOS it sits on another screen (American Megatrends) just saying entering setup... Same goes for the Boot Devices page. So let
me back up for just a sec, After I did the clean install it worked fine for about a couple hours I had time to install AVG and Spybot Search and Destroy and then went to bed and let it do updates. I run Win8.1Pro at school and work and have never had
this problem any suggestions?

let it sit for about 30 min and still got nothing
I then did a "hard shutdown(just pressed power button till it turned off the computer)"
That may not have been long enough. But a "hard shutdown" would definitely have been construed as a problem due to the update.
Asus apparently is a known problem case...
http://blogs.msdn.com/b/usbcoreblog/archive/2013/10/19/help-after-installing-windows-8-1-the-superspeed-ports-of-my-asus-system-don-t-work.aspx
Link courtesy Darrell Gorter [MSFT] found here
"Windows 8 Keyboard and mouse not working"
http://social.technet.microsoft.com/Forums/en-US/w8itprohardware/thread/06e9b341-0619-4085-acbf-e2f0133ca428?outputAs=rss
(RSS given to avoid overhead of opening long thread for IE users)
Note that there may be useful tips for you in both of those threads' comments.
Robert Aldwinckle

Windows Explorer Right Click - Open file in Air App

I have an AIR App that I made to run on my desktop. It is used for editing specifc XML files. I want to know if its possible to setup so that I can right click on an XML file while browsing Windows Explorer and choose an option to "Open in (my AIR App)" ... that would lauch my AIR app and also open the xml.
Right now, I have to launch my AIR app, click to open a file, and then browse for the file and select it.

ok so after all of this time, i stumbled upon something that should solve my problem. i created a new AIR file in flash and put a text field on the stage with the name "my_txt" then I just added this bit of script (below) .... then once I installed the air app, i opened a file into the app and the path to the file was displayed in the text box thats on the stage. now i just have to use this path to actually open the file.
import flash.events.InvokeEvent;
NativeApplication.nativeApplication.addEventListener(InvokeEvent.INVOKE, invoked);
function invoked(evt:InvokeEvent):void{
my_txt.text = String(evt.arguments[0]);

MY WINDOW KEEP CRASHING WHEN OPEN IN BOOT CAMP

I just bought a new imac 21" last week and have a professional install my window 8 on boot camp and also in parallel.
This is the 2nd time when I try to open in boot camp, window 8 need to repair as it can not be open. It said it need to do an automatic repair but still not work.
I am also having a hard time openning up the parallel . Need help!. Only have my new imac for a week and already have problem opening up the boot camp window 2nd time. First time , we need to uninstall and re-install again. I just have the profession uninstall and reinstall on friday, and 2 days later not working when I try to open it up under boot camp. I try refresh my computer and also automatic repair method and still not work.
Any help or suggestion apprectiate.
Thanks
Carla

Hi Carla,
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
Any change?

Computer won't boot after installing MFP M127FW

My computer won't boot to my hard drive after installing my new MFP M127FW printer unless I first unplug the USB cable from the printer and then turn on the computer. My BIOS is set to boot from my hard drive, not from a USB drive, so what did the installation of the MFP M127FW drivers and software do to my computer? I assume this has something to do with the Smart Install feature.
This question was solved.
View Solution.

Hi @frcraig ,
I see that you are experiencing issues with the computer booting up when the printer is connected by the USB cable.
I would like to help you out with this issue today.
Most likely it is the Smart Install on the printer causing this. The printer looks like a disk drive.
On the printer, touch Setup, Service, Smart Install and turn it off.
If you are still having issues, in the system BIOS, disable the Boot from USB device option and the USB Legacy Support option. Doing this will allow the PC to complete the boot process to the internal hard drive and allow you to enter Windows. If this does not work for any reason, you should boot your PC before connecting the USB drive. Once the computer is fully booted into Windows, connect the USB drive and wait for the operating system to detect the drive.
Important: Do not disable the USB Legacy Support if you are using a USB Keyboard. Doing so will prevent you from being able to use the keyboard during the booting sequence.
What kind of computer do you have?
If you need further assistance, just let me know.
Have a great day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

SharePoint Foundation 2010 - Your client does not support opening this list with windows explorer when clicking Open with Explorer

when I tried to open document library in Windows explorer view by click 'Open with Explorer', it popped up “Your client does not support opening list with windows explorer”
OS: Windows Server 2008 Enterprise x64
IE: 9.0 32bit
webcient service is runing
HKLM\System\CurrentControlSet\services\WebClient\Parameters and changed the BasicAuthLevel to 2 instead of 1.
Anybody knows how?
Thanks.

Did you add your site to trusted site list?
http://sharepoint.stackexchange.com/questions/15098/your-client-does-not-support-opening-this-list-with-windows-explorer
--Cheers

Windows 7 x64 Professional does not boot after install

Hello.
I created a Windows 7 VM in Windows Server 2012 R2 Standard Hyper-V, all the installation process done successfully, but after installation, it failed to boot and shows a black screen, and didn't boot after it.
Following is the event log occurs.
'Win-7_QA-Testing' was faulted because the guest executed an intercepting instruction not supported by Hyper-V instruction emulation. If the problem persists, contact Product Support. (Virtual machine ID 5B827557-7009-4D83-AA7C-26A45651EC3A)
VmName
Win-7_QA-Testing
VmId
5B827557-7009-4D83-AA7C-26A45651EC3A
FailureCategory
<not a known problem>
InstructionByteCount
0
InstructionBytes
Rax
0x10
Rbx
0x80
Rcx
0x0
Rdx
0x80
Rsp
0x200
Rbp
0x6e08
Rsi
0x25da4a
Rdi
0x7da4a
R8
0x0
R9
0x0
R10
0x0
R11
0x0
R12
0x0
R13
0x0
R14
0x0
R15
0x0
Rip
0x9d
Rflags
0x10002
FpControlStatus
7F030000000000000000000000000000
XmmControlStatus
0000000000000000801F0000FFFF0000
Cr0
0x10
Cr2
0x0
Cr3
0x0
Cr4
0x0
Cr8
0x0
Xfem
0x0
Dr0
0x0
Dr1
0x0
Dr2
0x0
Dr3
0x0
Dr6
0xffff0ff0
Dr7
0x400
Es
0002000000000000FFFF000020009300
Cs
00000B0000000000FFFF000000B09F00
Ss
0002000000000000FFFF000020009300
Ds
0002000000000000FFFF000020009300
Fs
0002000000000000FFFF000020009300
Gs
0002000000000000FFFF000020009300
Ldtr
0000000000000000FFFFFFFF00000000
Tr
0000000000000000FFFF000000008B00
Idtr
000000000000FFFF0000000000000000
Gdtr
000000000000270000002B0000000000
Tsc
0x3b48531f8c6
ApicBase
0xfee00900
SysenterCs
0x0
SysenterEip
0x0
SysenterEsp
0x0
PendingInterruption
0x0
Any help will be appreciated.
Thanks

How many vCPU and how much RAM have you given the VM?
Are you using alt +F10 and going into the shell to format the VHD and prior to the installation?
Are you using media that has SP1 slip streamed into it?
Have you tried forcing the vm off and then back on again?
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.
vCPU = 1
RAM = 2048MB
No, I haven't try formatting the VHD between the window installation. This is the first time I'm facing the issue. It is a simple windows 7 pre activated iso file, not powered by SP1. I have tried forcing the VM off and ON again, but simply i can't get the
window screen back. Whenever the VM malfunctioning like this, then it cannot be shut down from the Hyper-V directly, but to make the VM Turn Off manually.

Computer will not boot after changing RAM.

Hi All,
I have had some BSOD since I upgraded my system earlier in the year. So yesterday I decieded to try and test if the problem was one of the RAM blocks, by only using 1 X 4 MB ram at the time, and then after a BSOD I would change it to another RAM and test again.
Anyway, I started by taking all 4 X 4 MB ram's out, and then only insert 1 in Dimm 4(first found out later that I should have put it in Dimm 1). This worked fine, and computer rebooted, and I used it all yesterday. Then just before I went to bed I got another BSOD, so I powered the computer off, and then this morning before turning on the computer, I replaced the RAM with one of the other 4 MB ram, to continue the testing of my ram blocks.
But now my computer just wont boot anymore! I tried putting all RAM blocks back, putting 2 of them in, 1 at the time, and every combination I can think off, but it just wont start anymore.
When I power on the computer, it does start the fans, and the 2 blue light in the motherboard is on, but nothing comes on the computer screens, and no beeps or anything at all. It just stands there with all the fans running without booting bios.
I tried resetting the CMos, and removing the battery like shown in your guide on here, but it made no difference. I also tried to remove ALL ram blocks, just too see if it then would give me any beeps, but exact same thing happens. So I supect that the reason it does not start booting, is because it thinks that there is no RAM in the motherboard ???
I really hope someone can help me out here, since I'm close to giving up, and I'm out of ideas. Everything worked fine last night, but after switching the RAM block, it just wont boot anymore no matter what ram I put in it.
My system is:
MB: Z68A-GD80 (B3)
CPU: Intel Core-I7 2600K
RAM: 2 X 4 MB Corsair Vengence 1600 Mhz & 2 X Kingston Hyper-X Genesis 1600 mhz
GFX: HD 4870
Monitors: 2 X Asus vW246H
Please help! thanks in advance!

Quote from: Froggy Gremlin on 31-August-12, 18:25:21
This is almost always a recipe for failure and the most likely cause of the BSOD's. Recommend to pick one kit or the other to use, or better yet if 16GB is wanted, purchase a 4X4GB kit.
Check to see if the EPS/ATX 8-pin CPU power connection is secure. The PSU is not specified in your component list. It is possible it has gone bad. Test with only one RAM stick in the primary DIMM slot. I have the most trust in the Corsair brand.
Prior to the test, remove the PSU power cord, remove the battery for awhile, clear CMOS.
Hi, thanks for your reply.
I have been running with those different ram blocks for a long time, and the 2nd set I actually got after the BSOD's started to test the ram. The BSOD is very likely to be because of a bad Win 7 installation anyway, since I cloned my old HDD to a new SSD, and that is apperantly not a good way to go, so the lets just forget about the BSOD for now - that aint my main problem right now..
I did what you surgested above, eventhough I done it before. I now have just 1 corsair ram in DIMM 1.
Removed powercord, then I cleared the CMOS again by pressing the clear cmos botton at the back with a screwdriver for 10 secs. Then I removed the battery for 10+ secs as well.
Still does not seem to boot into bios. Fans running, and light on MB, so powersupply must be fine as well. Seems unlikely that it should just die overnight anyway.. Powersuppy is a Corsair HX 750.
CPU power conector is fine. I really haven't done anything except switching that RAM block this morning. Last night when I powered the computer down, everything worked fine.
To be sure that its not because my GFX card should have gone bad overnight, I tried with another GFX card, but still nothing comes on the screens when it should be booting up.
If the none of the RAM was working, or it does not detect any ram in the motherboard, shouldn't it atleast be giving some sort of error beeps ?? What is so frustrating is, that I get NO errors or sound or anything.. I just a black screen, and a computer with atleats all fans running..

What is the solution to save over a file with Windows Explorer preview pane open?

(This is a stagnant issue in an alternate thread and did not address the issue directly.) Every time I make a minor change to a document, I am forced to write a new file to save it. This is cumbersome, annoying and wasteful. I am an architect and I quite regularly need to have several windows explorer windows and pdf files open at once when coordinating information from several different places. It is not practical for me to turn off my preview pane or close every explorer window. How can I avoid saving every document new even when making a minor change?

Hi Michael ,
What kind of changes are you trying to make in that document ?
Is this happening with all kinds of document or any specific kind?
Which version of Acrobat are you using?
Please provide us with the details so that we an assist you further .
Regards
Sukrit Dhingra

Windows Explorer "My Computer" opens on boot after Acrobat Standard 9.2 install

Similar Messages

Maybe you are looking for