Windows Extensions Not Showing After Windows Intune Site Role Installed

Hi,
I have installed the windows intune site role on a SCCM 2012 R2 box and the Windows Intune Extensions have not been shipped to Admin>Overview> Cloud Services> Windows Intune as per the attached photo.  This is the third time I have built a
SCCM MDM service and I have not come across this before.  If you view the site roles it is installed, the subscription is active within config manager and the system authority is set to SCCM management in Http://manage.microsoft.com.
I am wondering if there is a way of breaking the intune association to try and re-install the role as there was not a full internet connectivity within the data centers at the time if install and external DNS was not resolving for FQDN and nslookup would
fail.  I believe that Intune requires a cert to be shipped to it at time of install.
Any help, thoughts and advice would be greatly received as my previous 2 installs have not been an issue.
Thanks in advance,
Nick

I am in the same boat and have a call open.  Apparently, there is some issue that the engineering team is working on.  I got the iOS and Email Profile extensions back in February, but never received the 8.1 extensions.  My call has been
running for 3 weeks now and they are still working on the delivery mechanism from their end.  I'll post back when they figure out what is going on. 
Best, Jacob I'm a PC.

Similar Messages

  • HP ENVY Rove 20 - Network Adapter not showing after Windows 10 Upgrade

    After upgrading to Windows 10 the Network Adapter does not show up. Verified in Device Manager that there is no issue and the driver is there. Removed the device from device manager, attempted to use a different driver, still no success.

    MrDimplz wrote:
    Really disappointed in HP for not being ready for W10 rollout.  I upgraded my HP Envy desktop PC 700-214 and after the upgrade, I could not connect to the internet.  Didn't recognize the networking hardware.  Went to HP Support (on different computer) and found out here aren't W10 drivers yet for this machine.  Very Poor.My wife has a Dell laptop and we have another older Dell that upgraded no problem.  Why because Dell is on top of their $__t when it comes to this stuff.Won't by HP again.Did you not try to reinstall the last support Drivers into Windows 10 to see if it works? Also with the lastest Windows HP will probably not support redoing drivers for older system as that will be cost prohibited to do. And it will be up to the Endusers to find the right drivers and software that matches their system to work with Windows 10 assuming they work with Windows 10. As to Dell that is something only Dell can answer that question and since we don't know if this is Dell Consumer or Business product since this falls outside of HP forums to discuss. You can't expect to have drivers if your system is too old to support Windows 10.

  • Extensions not showing under window pull down manu

    I can see extensions in photoshop cc 2014, but extensions is not showing up in Illustrator cc 2014.

    Apologies for the incompleted information.
    OS version: Yosemite 10.10.2
    Today I fired up the illustrator CC 2014 after 2 weeks didn't touch it, I can see the extension. Do not know why it is working now. I will do some more test on the extension.
    Thank you.

  • File extension not showing after a clip has been captured

    Hi ,
    I am using Adobe CS6 and am capturing in DVCAM format as soon as a clip is being captured , a new project is created with the captured clip in that
    But the issue is i am not able to get the file extension
    for ex: if you right click on that new clip and choose properties u can only see the file name (for ex: 123) , but if u manually goahead and import the same captured clip from local hard drive , it will show the extension
    for ex: 123.avi
    Could you please advise a solution for this issue..
    Thanks

    I'm unclear why this is something you're concerned about.
    In any event, the following link is where you can report bugs to Adobe:
    https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

  • Site Window does not show any item

    Hi,
    My site window does not show any items/folders to modify after I open my site.  I was wondering if there is anyone who can point out what I did wrong.  Usually the site window shows all the contents as soon as the site is opened.  Please help.  Thank you.
    coskinas

    If you look inside the webcontent folder, in Finder view (or Explorer???? if you're using Windows) - anyway, are there in fact files in there?
    Try Site > Update > Refresh all.
    If that doesn't work, try making a new site from existing content, which should give you a new site file (call it something slightly different) sitting beside your old one. I'm guessing here, but it can't hurt.

  • Ipod touch 5th gen will not sync after windows 8.1 update

    ipod touch 5th gen will not sync after windows 8.1 update. Computer see's Itouch as mass storage and charges. Worked with Window's 8 fine, as soon as update was done and restarted computer Itouch doesn't show up. Itouch seen on two other computers.

    See:
    iOS: Device not recognized in iTunes for Windows
    I would start with
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    Run this to help if it identifies the cause
    iTunes for Windows: Device Sync Tests
    Have you tried on another computer to help determine if you have a computer or iPod problem?

  • A USB thumb drive with data created in Windows is not showing up on my desktop. Do I need a different driver or something?

    A USB thumb drive with data created in Windows is not showing up on my desktop. Do I need a different driver or something?

    OK in order to read those files you will need MS Office for Mac or install MS Windows on your Mac. You can get MS Office for Mac from anyone that sells Apple products. I would suggest the Apple Store, Best Buy, Amazon etc...For help getting the data from the memory stick I'd recommend visiting your local Apple Store or AASP and they can help you move it. It should be as simple as plugging the USB drive into your USB port and then open a Finder Window where you will see the drive on the left  pane. If you don't know what Finder is or how to open a new Finder window you need the sites I've noted below!!!
    Because you are new to OS X I would strongly recommend you bookmark and frequently visit the following web sites:
    Switch 101
    Mac 101
    Find Out How Video tutorials

  • File Browser, properties, library window will not show up

    I'm using an old version of Motion 3 and my File Browser, properties, library window will not show up even when I click on the icons and/or press command+2,3, or 4 . Seems to be some kind of settings glitch as Motion works fine when logged in under another user. Any thoughts.

    schlickler,
    Welcome to Apple Discussions.
    but now I have the preferences folder on my desktop--does that have to stay there?
    No, it can be trashed.
    Plist files contain instructions for recording and executing tasks associated with the the application or function that owns them. They can and do become corrupted. If you look in the username/Library/Preferences Folder you can usually guess what application or function the .plist serves by analyzing the file name. In this case it was the com.apple.iCal.plist file.
    Proper identification of the appropriate .plist file is not always so obvious. When an application malfunctions, removing the associated .plist file from the preferences folder to the Desktop is often the easiest first troubleshooting step. Then log out/in or restart and re-evaluate the performance of the application.
    A new default .plist file is automatically created in your Preferences Folder after you remove the recalcitrant .plist and initiate the log out/in restart sequence. You can expect default application behavior and you will have to reset some preferences. If the application or function returns to normal after removing the .plist file, it will prove that the original file was corrupt, and you can now safely trash the .plist file which you placed on the Desktop.
    If the application or function is unsatisfactory with the new plist file, the original plist file which was placed on the Desktop can be safely returned to the preferences folder. Just allow the system to replace the newer plist.
    If you are having problems with any aspect of OS X, experiment with deleting the appropriate .plist file. Plist corruption is not uncommon and .plist file deletion often cures many problems. Too many users try intricate solutions first and end up complicating their minor problem.
    ;~)

  • Firefox Downloads (in classic or new download window) does not show progress or downloads

    I noticed that when I download anyhitng that the download window (classic and new) windows do not show progress anymore, do not show files downloaded, nor give me anything to right-click and go to that folder, in which it was saved. I had it fixed for 1 day, until it started to lose the files the next day.
    I only see the arrow turning green, with no result within the downloadswindow.
    I had done the following:
    1. In the Location bar, type about:config and press Enter.
    o The about:config "This might void your warranty!" warning page may appear. Click I'll be careful, I promise!, to continue to the about:config page.
    2. In the Search field, type browser.download.manager.scanWhenDone.
    3. Double-click on the browser.download.manager.scanWhenDone setting to change its value to false.
    You can set the Boolean pref browser.download.useToolkitUI to true on the about:config page to restore the classic Download Manager window.
    Yet this problem still continues.

    '''Try the Firefox SafeMode''' to see how it works there. <br />
    ''A troubleshooting mode, which disables most Add-ons.'' <br />
    [https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode#w_safe-mode-window_2 Troubleshoot Firefox issues using Firefox SafeMode]
    When in Safe Mode... <br />
    * The status of plug-ins is not affected.
    * Custom preferences are not affected.
    * All extensions are disabled.
    * The default theme is used, without a persona.
    * userChrome.css and userContent.css are ignored.
    * The default toolbar layout is used.
    * The JIT Javascript compiler is disabled.
    * Hardware acceleration is disabled.
    * You can open the Firefox 15.0+ SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
    * Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running.
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
    '''''If it is good in the Firefox SafeMode''''', your problem is probably caused by an extension, and you need to figure out which one. <br />
    http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes <br />
    Or it might be caused by Hardware Acceleration.
    ''When you figure out what is causing that, please let us know. It might help other user's who have that problem.''

  • Want to upgrade to lastest version - help/about Firefox window does not show "upgrade" as in instructions.

    I want to upgrade to latest version but -Help/About Firefox- window does not show "upgrade" as in the instructions. I cannot find an "upgrade" function anywhere else. How do I upgrade? The version I have is -18.0.1- it came with this used computer.
    I believe this computer was hacked. Word started doing very strange things. We wiped the hard drive and reloaded everything as it was originally when I bought it. I am now getting hacked online.
    They originally got into one of my credit cards last fall. That is when this all started. They got my AOL email address. They also got the credit card current balance, minimum payment, due date and then even the payment amount. They got into my Barnes & Noble account and now checkout does not work. Now I believe they have gotten into my AOL account - one thing after another has started going wrong. I cannot change that AOL user id/email address since it is the master and I would lose about 15 years of "stuff".
    The folks that sold me this computer told me to use a free version of an antivirus. I am very unhappy with it. I never had ANY trouble when I used TrendMicro's expense products. Those folks also told me to use Firefox, since AOL uses Internet Explorer - which I already knew is like Swiss cheese.
    Now, I cannot seem to get an upgrade of Firefox. Is this also a hack?
    Please help any way you can. Thank you for your time.

    It's probably just the Firefox updater having some problems. go to www.getfirefox.com and download Firefox 20.0.1

  • Face Time for mac does not show contacts window or allow me to sign in

    My Facetime for Mac launches but does not show me my Contacts sidebar or allow me to 'Sign In'. Preferences is grayed out as well.
    It works under a new user account (System Preferences > Accounts). I added a contact into the blank address book to test it out. I'm troubleshooting it right now to get it to work under my account, I think it has something to do with not fully accessing the keychain.
    The tell-tell sign for me is when I launch FaceTime for Mac the preview window does not show immediately. I have to click on the app a second time for the window to appear. This does not happen under the new account
    I have already:
    - Restarted
    - Removed preferences and Caches
    - Re-installed Face Time
    - Repaired and reset keychains
    - Signed in under a different MobileMe account in System Preferences
    Any other suggestions
    Message was edited by: helps
    Message was edited by: helps

    SOLVED !!
    After many, many more steps and close to total ruin of my MobileMe sync structure, I have the found the hidden files to remove that solved my problem.
    ~/Library/Preferences/.GlobalPreferences.plist
    ~/Library/Preferences/.GlobalPreferences.plist temp
    ~/Library/Preferences/.GlobalPreferences.plist .6Va7JFn [+these letters may be than different yours+]
    Logged out, then back in again
    When I launched Facetime it worked exactly as it does on my test user account.
    here are the terminal commands to try for your solution
    cd ~/Library/Preferences/
    ls -A [+To get the letters for the third file+]
    rm ~/Library/Preferences/.GlobalPreferences.plist
    rm ~/Library/Preferences/.GlobalPreferences.plist\ temp
    rm ~/Library/Preferences/.GlobalPreferences.plist\ .[+your letters+]
    Please Post any problems you run into or if it doesn't work.
    Message was edited by: helps

  • SCCM 2012: F8 debug widow not working (At-least not visible) after entering into the "Currently installed Windows 7 Image": F8 works in winPE

    F8 debug widow not working (At-least not visible) after entering into the "Currently installed Windows 7 Image"
    F8 option turned on in the boot image.
    F8 debug window works in Windows PE.
    F8 debug window does not show-up on F8 key-press after entering the 'Currently installed Windows 7 Image" all the way to the end of the task sequence.
    But after a 'Restart Step' (and if F8 was pressed) the Task Sequence tends to pause indefinitely as if the
    F8 debug screen is open in the background.
    I am using SCCM 2012 SP1 (CU 1 is
    not an option at the moment).
    Any ideas as to how I could get the debug F8 option back?

    There have been a couple reported occurrences of this (or something similar) to my knowledge with no resolution in the forums. Your best bet may be to open a case with CSS.
    Also note that if you were going to do a CU, why would you pick CU1 instead of CU4? And, can I ask why it's not an option out of curiosity?
    Jason | http://blog.configmgrftw.com

  • I recently ran adobe premiere cs6. I went to open recent project. It had loaded up but did not show any windows can anyone help me.

    I recently ran adobe premiere cs6. I went to open recent project. It had loaded up but did not show any windows can anyone help me.

    More information needed for someone to help... please click below and provide the requested information
    -Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
    •What is your exact brand/model graphics adapter (ATI or nVidia or ???)
    •What is your exact graphics adapter driver version?
    •Have you gone to the vendor web site to check for a newer driver?
    •For Windows, do NOT rely on Windows Update to have current driver information
    •-you need to go direct to the vendor web site and check updates for yourself
    •nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us
    •ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool

  • My ipod touch 4g does not show in Windows 7 or itunes.  I've removed and reinstalled itunes, stopped and started apple mobile services and changed out cables.  Ipod is charging when connected.  I've also done a complete rollback to factory defaults.

    My ipod touch 4g does not show in Windows 7 or itunes, I've removed and reinstalled Itunes.  I've done a factory default, and I've changed out cables. The ipod shows connected but does not show.

    Did you remove and reinstall all the Apple software by:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    Run this to see if it helps determine the cause
    iTunes for Windows: Device Sync Tests
    Try on another computer to help determine if you have an iPod or computer problem'
    Last, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
      Apple Retail Store - Genius Bar

  • My laser jet 100 color MFP M175nw is not working after windows 8.1 upgrade,

    my laser jet 100 color MFP M175nw is not working after windows 8.1 upgrade, driver on your website fails to setup at 83 % with an error message

    Welcome to the HP Forums  MillaMagia,
    I see by your post that the USB isn't being recognized.
    I can help you with this issue.
    Are you using the same USB cable? (known good USB cable)
    You want to use the normal USB slot 2.0 cable and not the latest USB 3.0.
    USB 3.0 are supposed to be backwards compatible.
    Try another USB port on the Laptop, some of the USB ports are more powered then others.
    I have provided a document to see if the printer is partially recognized in the device manager, which is causing the printer not to be recognized again. (the uninstall from the CD should have removed the entry and the printer from the registry)
    Leave the printer turned on and the USB cable connected directly to the computer and the printer's power cord directly into a wall outlet.
    How do I get into Windows Device Manager?
    Here is a document for Identifying problems in Windows Device Manager.
    Check to see if there are any hardware driver conflicts, you might see a ! mark or a red x beside a device with a conflict or unknown device, look under universal serial bus controllers, look for USB printing support or mass storage device, delete the entry by right clicking and select uninstall, OK.
    Let me know how it was listed. (screen shots welcome)
    If this is a Laptop then check the power management settings.
    Access the device manager. Windows 8-How do I access the Device Manager.
    Select universal serial bus controllers from the list, for each USB root hub, right click and left click on properties, for power management remove the check mark for "Allow the computer to turn off this device to save power". It allows the computer to limit or turn off power for this device.
    Disconnect the USB, run the full uninstall and reinstall the printer software again.
    If you need further assistance, let me know.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

Maybe you are looking for