Windows fails to load on my Satellite L300d-243
When I turn my laptop on windows fails to load. This happened just after a windows update, I dont have installation disks and I cant load into safe mode or anything.
What can I do?
this may be a stupid question but bios is F12?
ive set that to default and the same happens, windows failed to start. A recent hardware of software change might be the cause. To fix problem:
1. Insert your windows installation disc and restart your computer.
2.Choose you language settings, and clich "Next".
3.Click "repair your computer"
If you do not hve this disc, contact your systems admin or computer manufacturer for assistance.
File: \Boot\BCD
Status: 0xc000000f
Info: An error occurred while attempting to read the boot config data.
Similar Messages
-
Satellite A305D-S6848 does not start up - Windows failed to load
SCREEN SAYS "Windows failed to load because a required file is missing, or corrupt.."
file: ntoskrnl.exe
status: 0xc0000098
I DO NOT HAVE AN INSTALL DISK AND DONT KNOW HOW TO GET SYSTEM BACK UP AND RUNNING??
CAN SOMBODY PLEASE HELP ME ???Hi
It seems to be a Toshiba US notebook series and therefore the recovery process might be different as on Toshiba European notebooks
However, the recovery procedure should be mention in user manual. Check this
Try firstly this:
Power up the unit and press F8.
Then choose Safe Mode and try to boot the Windows in safe mode.
If it does not work, try Repair the Computer option.
I think the notebook should be equipped with HDD recovery. This means that you could recover the unit without the usage of the recovery disk.
As mentioned this is US notebook series and as far as I know you have to press 0 button immediately after the notebook has been powered up.
This should start the recovery -
Satellite A500-15N "windows failed to load"
I turned my laptop on today and the usual boot process began.
-Toshiba logo (press F2, F12)
-windows green loading bar
Then the laptop displays a black screen and nothing happens.
When I power off the laptop and turn it back on I get a message saying "windows failed to load" it then gives me the options to run windows normally or to run windows restore.
Windows restores does not work when I try to run it.
This previously happened to me and I was forced to use my backup restore CDs to restore the laptop to originial settings. I would like to try and resolve the issue for good, if possible, though.
I do not want to have to restore the laptop each time this happens and risk losing saved data.
The laptop works fine when constantly plugged in.
Both times now this has happened when the laptop has been disconnected from the mains and the battery has run out of power.
Any help would be greatly appreciated.For the past week it hasn't been used. I shut it down and left it unplugged. Then yesterday I plugged it back in and switched it on. The battery was fully drained and it wouldn't load.
By pressing f6 during boot process I can get the list of options for starting in safe mode etc. From here I am able to run the Toshiba recovery and restore it to original setup.
While this allows me to use the laptop now, I fear that by letting the battery lose power I will have to go through this process again and risk losing any data saved on the hard drive.
I don't think I am the only person to have experienced this issue from what I have read on the internet, but I have. It found a solution. -
Trying to do BootCamp Windows-7 install on my MacBook (running 10.5.x).
Detailed progress notes here. Latest: "Windows failed to load because the kernel is missing, or corrupt." (ntkrnlpa.exe) Hit `Enter` to continue, make next selection, but it comes back to error message. So shut down (power button) then reboot with Windows DVD still in there. Ended up with same error!Best thing to do is nuke the drive, then reinstall Vista again.
I know this is a long process but should get you back running again.
Linux makes odd partitions that recovery does not understand and they don't get deleted properly, boot and nuke will take care of that. -
Windows 7 display driver error on Satellite L300D
Hey guys, I have recently upgraded the OS on my Satellite L300D (PSLC8A), from Vista 32bit to Win7 32bit, but I need a better driver for the graphics card, an ATI Radeon 3100 256MB, and every time I try and run either the Win7 driver from the ATI website, or even the graphics drivers from the Toshiba websites (Ive tried the Vista display driver, the display driver for the Satellite L300D-ST3501 from the European website for windows 7 display driver etc etc) and every time I try, I get the same message, it goes through the entire process, then says it fails, always failing at the same part, at the ATI Display Driver installation
Am I trying the wrong driver? Is there not one out for my laptop for 7? I dont quite understand, and any help would be appreciated
Also like to point out, that Ive attempted to allow it to tell me when Win7 finds something new and needs permission, and have tried running *every* time in admin mode.Hi
First of all you should find out what graphic card is built-in.
Install an free hardware diagnostic tool. You could use Everest Home Edit. for example.
This would help you to get more details about your GPU.
After that you could investigate a little bit what Toshiba notebooks have been equipped with the same graphic card chip.
I noticed that many series use the same devices like the same graphic card or chipset
Anyway. The Toshiba US driver page contains many Win 7 drivers you will find also some Win 7 drivers on Toshiba European driver page
Download the ATI driver for a notebook which has been equipped with the same graphic chip and you would get the compatible one!
Then install the driver in device manager! Yes, go to device manager and use the advanced installation this allows you to point to the ATI driver files.
This installation procedure should work -
Error message "failed to load Tosrfcom" on Satellite Pro U200
hi
I have Toshiba Satellite PRO U200 notebook with pre-installed VISTA Business
after restart, even for the first time, have the following error in Event Log:
Log Name: System
Source: Service Control Manager
Date: 07.07.2007 01:29:15
Event ID: 7026
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: toshiba
Description:
The following boot-start or system-start driver(s) failed to load:
Tosrfcom
under:
http://www.eventid.net/
cannot find any solution !
knows someone howto solve this problem ?Hi
After a long investigation I found out that the Tosrfcom service is a part of the Toshiba Bluetooth. It must be a Bluetooth RFCOMM driver.
The driver was installed in the registry under this entry:
HKEY_LOCAL_MACHINE\ SYSTEM\ CurrentControlSet\ Services\ Tosrfcom
I dont see many solution ways
Try to remove the BT stack and download the newest one from the Toshiba Bluetooth center. -
Problems using JAXB in windows(Failed to load Main-Class manifest)
Friends,
I am trying to use JAXB in windows environment. I have already included rt and xjc jar files in my system classpath.
I have sucessfully created java files using the xjc compiler(without the xjs map file). They rock!!
But I am facing problems while creating .xjs file from my dtd. I tried looking into previously discussed topics, with no help. :(
my command line:
java -jar C:\jaxb-1.0-ea\lib\jaxb-rt-1.0-ea.jar mySchemaFile.dtd
This is what i get :
Failed to load Main-Class manifest attribute from
C:\jaxb-1.0-ea\lib\jaxb-rt-1.0-ea.jar
Please help, if you have come across this or similar issue..
Or let me know how you create a .xjs file.
Any idea what is the main file class in jaxb-rt-1.0-ea.jar that creates a xjs file ?
All/any help appreciated. Thanks in advance.Hi,
You cannot use xjs files with the JAXB Beta RI.
This has been mentioned at http://java.sun.com/xml/jaxb
"Note that this version is not API-level compatible with the previous released version of the specification and DTD schemas are no longer supported."
You can generate code using the xjc binding compiler for schema documents.
Pls let me know if you have more questions
Thanks,
Bhakti
Friends,
I am trying to use JAXB in windows environment. I have
already included rt and xjc jar files in my system
classpath.
I have sucessfully created java files using the xjc
compiler(without the xjs map file). They rock!!
But I am facing problems while creating .xjs file from
my dtd. I tried looking into previously discussed
topics, with no help. :(
my command line:
java -jar C:\jaxb-1.0-ea\lib\jaxb-rt-1.0-ea.jar
mySchemaFile.dtd
This is what i get :
Failed to load Main-Class manifest attribute from
C:\jaxb-1.0-ea\lib\jaxb-rt-1.0-ea.jar
Please help, if you have come across this or similar
issue..
Or let me know how you create a .xjs file.
Any idea what is the main file class in
jaxb-rt-1.0-ea.jar that creates a xjs file ?
All/any help appreciated. Thanks in advance. -
Windows will not load on a Satellite A350 with 500GB Seagate external HDD
There is an issue with this A350-043 Laptop running Windows Vista Home Premium 64Bits, part number : PSAL6C-04S015
Simply put: when connected to a SEAGATE 9NK2AL-510 500GB SATA DRIVE EXTERNAL USB (s/n: 5QG1YH1E) Windows will not load, it goes upto and freeze just prior to the green moving bars. If the USB cord is pulled out and put back in for a second, Windows continues to load normally and all is well.
Otherwise, the OS will take up to 15 minutes to load. Looking in the BIOS features, there is no option to boot from USB available, so it cannot be disabled. I have upgraded the BIOS of the Toshiba to the latest version with no change in that issue.
I have tested and confirmed that the issue persist no matter which USB port is used.
The external drive is fully fonctional and there is no errors or issues with it when Windows is loaded. I am reported this issue to Seagate as well as Toshiba in the hopes that a solution can be offered on that, but did not hear back on anything as yet.You mean the notebook needs 15min to load the Windows OS even if the external HDD is not connected?
This sounds weird and I doubt this can be related to any software issue
First of all you should check the booting order in the BIOS the USB should be set at last or second last position.
Secondly you should check if the same issue would still persist after an new OS installation in some cases the booting procedure could be affected due to installed software and background processes.
But if the new OS installation does not help and if the issue will still persists then I assume that an hardware problem (motherboard????) could be the reason for that and therefore an notebook technician should be contacted!!!
Thats my opinion -
Satellite L300D-243 and WLAN - limited connectivity
I've just got an L300D-243 and it is mostly lovely, but ... when I try to connect to our wireless internet I keep getting a 'limited connectivity' notification. I'm using system pack one so it's not the fault known in system pack 2. It works fine when I use the internet cable, but that kind of defeats the purpose of having a computer I can carry around.
So, can anyone suggest a cure?
TriziaHi!
Please check the link posted by Feliks. It seems that it could solve your issue with the WLAN connection.
Furthermore I can recommend installing the newest WLAN driver from Intel. On my Satellite L300 I had some issues with the WLAN connection and a driver update could solve the problem! :)
Bye -
Windows Fails to Load After Upgrade to Mavericks
Related topic:
https://discussions.apple.com/activity?streamSource=connections
I'm a little late to this party, but hoping to find some help. I can see my WindowsXP Pro partition on the desktop, but after upgrading to Mavericks it won't fully start up. I'll get the usual screens, then the XP loading screen with the blue loading animation. After about 5 passes of the blue thing, it will hesitate and flash a blue screen so fast, that it took me several attempts to snap a photo so I could read it. "Unmountable_Boot_Volume" is the error. It then says to follow these steps... but cuts off and reboots.
One thing of note is that Parallels 10 uses the same XP virtual machine and boots just fine, so I figure XP can't be all that messed up. Maybe a driver issue, not sure. Does Mavericks not support XP? I'm open to Windows 7, but I'd like to backup some stuff first if possible. Maybe I can do that through Parallels?
Below are some details about my setup:
Als-Home-Mac:~ user$ diskutil list
THIS IS AN EXTRA FAT32 DRIVE
/dev/disk0
#: TYPE NAME SIZE IDENTIFIER
0: FDisk_partition_scheme *82.0 GB disk0
1: DOS_FAT_32 NEWMAN 82.0 GB disk0s1
THIS IS THE MAVERICKS DRIVE WITH XP PRO PARTITION
/dev/disk1
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *1.0 TB disk1
1: EFI EFI 209.7 MB disk1s1
2: Apple_HFS Big Al Pro 833.6 GB disk1s2
3: Apple_Boot Recovery HD 650.0 MB disk1s3
4: Microsoft Basic Data 165.7 GB disk1s4
Als-Home-Mac:~ user$ diskutil cs list
No CoreStorage logical volume groups found
Als-Home-Mac:~ user$ sudo gpt -vv -r show /dev/disk0
Password:
gpt show: /dev/disk0: mediasize=81964302336; sectorsize=512; blocks=160086528
gpt show: /dev/disk0: MBR at sector 0
start size index contents
0 1 MBR
1 62
63 160086465 1 MBR part 11
Als-Home-Mac:~ user$ sudo fdisk /dev/disk0
Disk: /dev/disk0 geometry: 9964/255/63 [160086528 sectors]
Signature: 0xAA55
Starting Ending
#: id cyl hd sec - cyl hd sec [ start - size]
1: 0B 0 1 1 - 1023 254 63 [ 63 - 160086465] Win95 FAT-32
2: 00 0 0 0 - 0 0 0 [ 0 - 0] unused
3: 00 0 0 0 - 0 0 0 [ 0 - 0] unused
4: 00 0 0 0 - 0 0 0 [ 0 - 0] unusedMac Pro 3,1
Quad-Core Intel Xeon
2.8 GHz
Upgraded from 10.6.8, but I tried unsuccessfully to upgrade to Lion first. That went all screwy but was able to go all the way to Mavericks instead. Proobably where things got messed up. I don't remember exactly how I fixed it. I didn't think I could go that current with this hardware.
Als-Home-Mac:~ user$ sudo dd if=/dev/rdisk1s4 count=1 2>/dev/null | hexdump -C
Password:
00000000 eb 52 90 4e 54 46 53 20 20 20 20 00 02 08 00 00 |.R.NTFS .....|
00000010 00 00 00 00 00 f8 00 00 3f 00 ff 00 00 48 26 61 |........?....H&a|
00000020 00 00 00 00 80 00 80 00 ff 1f 4a 13 00 00 00 00 |..........J.....|
00000030 00 00 0c 00 00 00 00 00 ff a1 34 01 00 00 00 00 |..........4.....|
00000040 f6 00 00 00 01 00 00 00 cf 33 84 9c 53 84 9c d2 |.........3..S...|
00000050 00 00 00 00 fa 33 c0 8e d0 bc 00 7c fb b8 c0 07 |.....3.....|....|
00000060 8e d8 e8 16 00 b8 00 0d 8e c0 33 db c6 06 0e 00 |..........3.....|
00000070 10 e8 53 00 68 00 0d 68 6a 02 cb 8a 16 24 00 b4 |..S.h..hj....$..|
00000080 08 cd 13 73 05 b9 ff ff 8a f1 66 0f b6 c6 40 66 |...s......f...@f|
00000090 0f b6 d1 80 e2 3f f7 e2 86 cd c0 ed 06 41 66 0f |.....?.......Af.|
000000a0 b7 c9 66 f7 e1 66 a3 20 00 c3 b4 41 bb aa 55 8a |..f..f. ...A..U.|
000000b0 16 24 00 cd 13 72 0f 81 fb 55 aa 75 09 f6 c1 01 |.$...r...U.u....|
000000c0 74 04 fe 06 14 00 c3 66 60 1e 06 66 a1 10 00 66 |t......f`..f...f|
000000d0 03 06 1c 00 66 3b 06 20 00 0f 82 3a 00 1e 66 6a |....f;. ...:..fj|
000000e0 00 66 50 06 53 66 68 10 00 01 00 80 3e 14 00 00 |.fP.Sfh.....>...|
000000f0 0f 85 0c 00 e8 b3 ff 80 3e 14 00 00 0f 84 61 00 |........>.....a.|
00000100 b4 42 8a 16 24 00 16 1f 8b f4 cd 13 66 58 5b 07 |.B..$.......fX[.|
00000110 66 58 66 58 1f eb 2d 66 33 d2 66 0f b7 0e 18 00 |fXfX..-f3.f.....|
00000120 66 f7 f1 fe c2 8a ca 66 8b d0 66 c1 ea 10 f7 36 |f......f..f....6|
00000130 1a 00 86 d6 8a 16 24 00 8a e8 c0 e4 06 0a cc b8 |......$.........|
00000140 01 02 cd 13 0f 82 19 00 8c c0 05 20 00 8e c0 66 |........... ...f|
00000150 ff 06 10 00 ff 0e 0e 00 0f 85 6f ff 07 1f 66 61 |..........o...fa|
00000160 c3 a0 f8 01 e8 09 00 a0 fb 01 e8 03 00 fb eb fe |................|
00000170 b4 01 8b f0 ac 3c 00 74 09 b4 0e bb 07 00 cd 10 |.....<.t........|
00000180 eb f2 c3 0d 0a 41 20 64 69 73 6b 20 72 65 61 64 |.....A disk read|
00000190 20 65 72 72 6f 72 20 6f 63 63 75 72 72 65 64 00 | error occurred.|
000001a0 0d 0a 4e 54 4c 44 52 20 69 73 20 6d 69 73 73 69 |..NTLDR is missi|
000001b0 6e 67 00 0d 0a 4e 54 4c 44 52 20 69 73 20 63 6f |ng...NTLDR is co|
000001c0 6d 70 72 65 73 73 65 64 00 0d 0a 50 72 65 73 73 |mpressed...Press|
000001d0 20 43 74 72 6c 2b 41 6c 74 2b 44 65 6c 20 74 6f | Ctrl+Alt+Del to|
000001e0 20 72 65 73 74 61 72 74 0d 0a 00 00 00 00 00 00 | restart........|
000001f0 00 00 00 00 00 00 00 00 83 a0 b3 c9 00 00 55 aa |..............U.|
00000200 -
Why do search results in the iTunes store and the preview music window fail to load properly?
Since I updated to the second update to iTunes 11, I've had problems with searching in the iTunes store and viewing the previewed music window. It had worked fine in the first iTunes 11 update from iTunes 10 but it has not worked properly since the second update. I've also tried resetting the iTunes store cache but to no avail.
Screenshots here:
http://puu.sh/1E5yO - Search results in iTunes Store
http://puu.sh/1E5A3 - Preview Music History WindowSee Apple Discussion link
https://discussions.apple.com/thread/2332677?start=0&tstart=0
Essentially run iTunes as Administrater once and it should solve the problem going forward.
Go to /Program Files/iTunes and right click iTunes.exe and select run as admin
No need to do it every time, just once and than desktop shortcut icon will open iTunes with solved Store search display problem. -
Windows Boot Manager - windows failed to load because the HAL is missing
what does this mean? what do I need to do to repair? I have no windows installation cd as I bought the laptop with all the software on it - it was a demo in comet
Hi
I assume the \System32\Hal.dll is missing.
This means that your windows OS needs to be reinstalled.
I dont know what notebook you have but I think that Toshiba recovery disk creator was preinstalled on your notebook. This software creates the Toshiba recovery DVD which help you to reinstall the OS. But now its to late you cannot boot into the OS.
You could try this:
Press F8, choose repair my computer and then choose Toshiba HDD Recovery.
Maybe this option is available.
If not then you would need a Windows installation disk -
Re: Satellite L300D-243 - CD drive doesn??t reject the CD disk sometimes
Hi
every time I'm using a CD I have to turn off laptop-and switch on after some time because cd won't come out.
Any suggestions.Hi
Every ODD (CD/DVD drive) contains a tiny whole near the eject button.
If the disk drive wont reject the disk then you could try use and insert a small object (bracket, wire, etc) in order to reject the inserted disk.
But usually this should not happen and if this will happen very often then you should contact the technician because this issue could be related to the hardware issue
Cheers -
My laptop turns on to a black screen telling me it has failed to load due to a possible hardware or software change. What can I do to resolve this issue? Thanks
Hello @jessica321 ,
Welcome to the HP Forums!
I understand Windows fails to load on your notebook and shows a black screen indicating a recent hardware or software change could be the culprit.
If you haven't made any hardware changes I would suggest performing a system restore to before the issue started. This will remove any recent Windows updates, software updates, or software installs that could be the source of the issue.
If that fails I would suggest reseating the HDD and RAM. You can see how to do this for your notebook in the Maintenance and Service guide which can be found on your products support page here: HP - Drivers & Downloads.
If reseating the connections does not help check the BIOS for hardware failures by following this guide: Testing for Hardware Failures (Windows 7, Vista) or Testing for Hardware Failures (Windows 8). This will tell you if your HDD or RAM has failed which are the most common hardware failures.
Let me know if any of that helps!
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP. -
ThinkPad T410i Windows 7 not loading - help!
I have had the machine with pre loaded windows 7 since 2010. Today I tried to recover the factory settings as it had become real slow to boot etc. Neither the thinkVantage button nor F11 while booting took me to the desired place though. Instead, the screen "Windows error recovery" came up. Now every time I click "Start windows normally" windows fail to load, I see briefly a blue screen, then back to the initial welcome screen, to the "Windows error recovery" screen and so on, vicious circle.
Any ideas please? I don't have a recovery cd.
Thanks in advance!when you hit the "ThinkVantage" button does it display the menu to choose from BIOS, Boot device, and esc?
And do you have access to another computer and a flash drive?
Maybe you are looking for
-
I share a apple account with my daughter. she has her device ipod touch attached to my account. Is there a way to block group text on her ipod from my iphone since we share an account
-
How do I add a mac to my TMachine / TCapsule backup?
I have a Time Capsule for Time Machine back-up of an iMac. Now I want to back up a MacBookPro on the same TC. I have heard about "sparse bundling" but don't know how to set this up on my portable. Any ideas please? (Pondini ??). Thanks.
-
Update of Registers based on Material Group
HI Gurus There are Material groups say A,B,C etc. They require A-A1,A2,A3(Subgroups) B-B1,B2(Subgroups) C-C1,C2(Subgroups) Now Requiremnt is registers should be updated /extracted (J1I5(Update of register
-
NEW ASA 5510 8.4 -- internet is not working
Hi Experts, I implemented a ASA5510 with latest software version. I configured outside interface, default route, PAT to the outside interface. I am able to ping and telnet to the inside interface of the ASA. But internet is not working. Did i miss an
-
FGI0-P&L REPORT-CLIENT MADE LOSS(NEGATIVE) BUT REPORT SHOW POSITIVE(GAIN)
I need to make changes to a report with a customized form and report type FAGLFLEXT . I need the value of the retained profit/loss for the year to show a negative as the client made a loss for the year The role where the retained profit or loss is