Windows file not recognizable by Boot Camp Beta 1.3

I've been trying very hard lately to get my computer running Windows again after a major hard drive loss (we don't talk about this...it was a very sad day). I had used Windows successfully before, but it was a version I borrowed from a friend that was a school copy, so it was sort of an unverified version. I have no way of getting that version back. Now a new friend said she would give me a copy of her Windows, but she could only give me a CD-R with her windows backed up on it because she lost the original copy. I thought it would work fine because my computer would recognize it. I was wrong. I really don't want to have to buy a new version of Windows, because I honestly have one right here. What should I do?
-Bee

I suppose I don't quite understand what you mean. Is it not "legitimate" because it's on a CD-R and not an original Windows CD? Because it is the software, she just copied it over.
I have no problem buying the new one, but I just don't want to buy a whole new Windows, which can be pricey, and then realize that I could have used the version given to me.

Similar Messages

Under Windows 7 Ultimate x64 and Boot Camp, my 27 inch Apple LED Cinema Display checks out as a Generic PnP Monitor and is shown as NOT HDCP compliant. I haven't been able to find any kind of an .inf file to use. Does anyone have a solution?

Under Windows 7 Ultimate x64 and Boot Camp, my 27 inch Apple LED Cinema Display checks out as a Generic PnP Monitor and is shown as NOT HDCP compliant. I haven't been able to find any kind of an .inf file to use. Does anyone have a solution? Or is Apple's implementation of HDCP (if it's there) incomplete?

I am having this same issue. Im not sure if this is the cause but I think this is keeping PowerDVD Ultra 11 from playing back Bluray under Windows 7 / Bootcamp

"Your bootable USB drive could not be created" "Boot Camp only supports 64-bit Windows installation on this platform. Please use an ISO file for 64-bit Windows installation."

I try to install windows7 system on my macbook air, which version is 10.8.5. When I open the bootcamp, it let me to choose a windows ISO image, which I've already downloaded from this website: http://www.w7forums.com/threads/official-windows-7-sp1-iso-image-downloads.12325 /, it also asked me to select a USB drive, which is kingston that has 8GB. Then when I clicked "continue", it said that "Your bootable USB drive could not be created" "Boot Camp only supports 64-bit Windows installation on this platform. Please use an ISO file for 64-bit Windows installation." But actually the ISO image I downloaded is 64-bit windows7. I don't know why this would happen. Could someone help me please!!

Thanks for your feedbakc Kiranjj!
I identified the reason to be that the W8 installation file didn't download completely from a Mac OS-device. I downloaded from another Win-device and the moved the installation file with a USB-stick and then everything worked diectly! But thanks anyway.

When you load Windows via Boot Camp Assistant program and run Windows does not recognize the "usb" outlets cannot identify the device through the Dvd or flash

When you load Windows via Boot Camp Assistant program and run Windows does not recognize the "usb" outlets cannot identify the device through the Dvd or flash

Did you install BC drivers on the Windows side?

Windows 8 does not restart in Boot Camp

I installed Windows 7 in Boot Camp under Mountain Lion, then upgraded to Windows 8 Pro from within Windows on the Boot Camp partition. Initially I had tried to do a clean install of Windows 8 but received an error message that the version of Windows 8 I had was not designed for a clean install. In any case, Windows 8 worked fine - until I shut it off and tried to restart. After disabling sleep or any type of shutdown in OS X 8.2, I tried starting Windows 8 once more and was able to do so. However, after an normal restart following downloading updates, I get only a blue screen when attempting to start Windows 8. Additionally, Windows 8 will not start from a Windows 8 Install disk (which Boot Camp can recognize and use as the start disk). Have others had this problem? What have you done?

Hi All, thanks for interacting. However, I think the solution may be different than any of us suspected. After installing Windows 7 - and having it work well - I let Windows sleep and found to my consternation that I had the same black bios screen when attempting to reboot it. So I checked the forums to see if anyone else had that problem. Lo and behold, I found a post that said Windows 7 wouldn't reboot when he had an HD attached. I took that as a clue. Here's what I wrote to him:
"Interestingly enough, I had problems with Windows 7 (as well as Windows 8) restarting with some external HDs attached - three different ones, actually. After reading your note, I wondered if the issue with the failure of Windows 7 to restart might have to do with the fact that the HDs were attached. I ejected them in OS X and then tried a reboot - Voila! There was Windows 7, all happy again.
With respect to checking to see if the HDs are boot options, OS X (I'm using 8.2) does that prior to an OS coming up. If you hold down the Alt key while Boot Camp is restarting the Windows and Mac disks come up along with the Mac Recovery partition - not the external HDs (unless, I suppose, you had an OS on them). So Boot Camp already seems to know that they're not bootable. The problem might be that Windows is trying unsuccessfully to wrest control of those HDs from the Mac OS. What about it all you techs out there? Any ideas?" ....
Now I'm tempted to re-install Windows 8 and determine whether that was the basis of the non-boot problem I experienced under 8 - rather than there being no drivers from Apple yet. However, I have a few pieces of Windows software that are not compatible with version 8, so I'm going to leave well enough alone for now. Anyone else care to try it?

802.11ac not recognized on Windows 8.1 Pro under Boot Camp.

I just installed Windows 8.1 Pro under Boot Camp. The issue I am having is that the 802.11ac network is not recognized in Windows. Windows only recohnizes the 802.11n network. When I boot up OSX Yosemite, It works as usual. Anyone else have this problem?

8/8.1 will install fine but there's some stuff you need to do before starting to ensure no issues
purchase a retail 8/8.1 license
use only a USB2 flash drive
get a clean 8 or 8.1 ISO
newer machines are more selective with the ISO for some reason (ISOs that worked to install Windows on many different older Macs would not work)
if you've made lots of changes, hacks and adjustments trying to get this work on your own, you should clean install OSX first, do not restore from time machine and start at step 3 to get Windows installed, you can go back later and copy files back to OSX
if you want to try without clean installing OSX, here goes
open boot camp assistant (bca) and choose option 3 ONLY if it reads 'remove/delete' Windows
open disk utility (du) and confirm that your HD now only has 1 single partition ('macintosh HD' unless you've renamed it)
restart machine and do a PRAM reset
open du and repair permissions TWICE
open bca and choose all 3 options (create, download, install)
from here, the process follows the standard boot camp instructions (http://manuals.info.apple.com/MANUALS/1000/MA1636/en_US/boot_camp_install-setup_ 10.8.pdf) but pay attention to step 3 where you do have to manually reformat the boot camp partition
clean ISOs
http://getintopc.com/softwares/operating-systems/download-windows-8-pro/
http://getintopc.com/softwares/operating-systems/windows-8-1-download/
if you are trying to clean install 8.1, google clean install 8.1 with windows 8 key for steps like this
http://forum.notebookreview.com/windows-os-software/735517-how-install-windows-8 -1-clean-your-windows-8-upgrade-key.html

Can you use Windows 7 to partition a Boot Camp created drive (not just a PC partition on a Mac drive) into multiple PC partitions?

Can you use Windows 7 to partition a Boot Camp created dedicated PC drive (not just a PC partition on a Mac drive) into multiple PC partitions?

Can you download this utility, it is a close equivalent of the gpt command, but has more features? (It is more than likely that Windows took over and converted this to an MBR disk).
http://sourceforge.net/projects/gptfdisk/
Once you have it installed you run it as follows. You can execute using either /dev/disk1 or /dev/rdisk1 as the parameter.
type gdisk
gdisk is /usr/sbin/gdisk
sudo gdisk /dev/disk0
Password:
GPT fdisk (gdisk) version 0.8.9
Warning: Devices opened with shared lock will not have their
partition table automatically reloaded!
Partition table scan:
MBR: hybrid
BSD: not present
APM: not present
GPT: present
Found valid GPT with hybrid MBR; using GPT.
Command (? for help): p
Disk /dev/disk0: 1954210120 sectors, 931.8 GiB
Logical sector size: 512 bytes
Disk identifier (GUID): 6ED0C429-00D1-4759-B50E-04B6FB80D0E3
Partition table holds up to 128 entries
First usable sector is 34, last usable sector is 1954210086
Partitions will be aligned on 8-sector boundaries
Total free space is 1293 sectors (646.5 KiB)
Number Start (sector)    End (sector) Size       Code Name
   1              40          409639   200.0 MiB   EF00 EFI System Partition
   2          409640      1452940543   692.6 GiB   AF00 Customer
   3      1452940544      1454210079   619.9 MiB   AB00 Recovery HD
   4      1454211072      1954209791   238.4 GiB   0700 BOOTCAMP
Command (? for help): q

HT5628 i was installing windows 8 on mac by boot camp and after i put the windows code and choose the partition i formatted the boot camp sector it said windows can not install on this sector because it is gpt

i was installing windows 8 on mac by boot camp and after i put the windows code and choose the partition i formatted the boot camp sector it said windows can not install on this sector because it is gpt

Reinstalling Mavericks depends on several factors:
if you erased your recovery partition
what OS originally came on your Mac.
I'll assume you don't have a backup available that you made before your mishap, because you didn't mention it.
That's really the take home message here: have a backup!
If you still have your recovery partition:
boot into the recovery partition (command R at restart)
use the recovery partition to reinstall Mavericks. see: OS X: About OS X Recovery
if you do not still have your recovery partition, then it depends on whether your Mac originally came with installer disks or not.
If it originally came with installer disks, you would boot from the installer disks, erase your HD, and then reinstall the OS that is on the installer disks, and then upgrade as necessary until you get to Mavericks.
If your mac did not originally come with installer disks, but you managed to erase your recovery partition, then you can try to boot into internet recovery (option-command-R at restart), and use internet recovery to erase your HD and reinstall the OS that originally came with your computer, and then upgrade to Mavericks if you need to. See: Hands on with Mountain Lion's OS X Recovery and Internet Recovery | Macworld
(the reference refers to ML but it applies just as well to Mavericks).

Install Windows XP in Leopard WITHOUT Boot Camp - No More Disk Error

For those of you having problems installing Windows XP in Boot Camp because of the formatting screen never showing up and then the system restarting with the dreaded:
Press any key to boot from CD .....
Disk Error
Press any key to restart
I too spent many frustrating hours trying to find a solution that worked. I searched these threads, tried many of the solutions suggested here and elsewhere, including recreating the Windows CD without a specific file, using the FreeDOS boot CD (couldn't ever get it to work, though I understand some people have had success), Reinstalling Leopard and trying again, dancing around the laptop with incense three times counter clockwise while chanting the name of my childhood pet... etc.
I FOUND A NEW SOLUTION!!!! A much easier solution!!!!
For anyone who is having this problem and is planning to run virtualization software.
(Something that let's you run Windows from inside Leopard)
SKIP BOOT CAMP ALTOGETHER!!!
USE VMware Fusion to install Windows.
I decided to try a different approach entirely and did a completely fresh install of Leopard (not sure if that was necessary or not but with everything else I had been trying I wanted to clean it up anyhow) and then installed the 30 day trial version of Fusion w/ the unlock key VMware emailed me.
I entered my information and Windows product key into Fusion's "Easy Install" Interface, clicked install, and about 30 minutes later I was browsing around in XP.
I HIGHLY recommend this option for anyone having difficulty with the formatting screen not showing up. I have a Bachelors Degree in Information Systems and still spent the better part of 2 days working on this boot camp problem, including numerous hours with the higher tier of apple's tech support. I suspect that those of us having this problem may have an OEM or systembuilder copy of XP... but that is for Apple to deal with - not me, I have better things to do with my time.
If you are planning to run Windows from within Leopard anyhow, just buy Fusion and to **** with the hassle.
You can go to VMware's website and get a 30 day evaluation copy to see if this will work for you before you decide if you want to purchase it, they will email you the unlock key.
Best of luck, hope this saves someone some time!

For what it's worth, I've used the OEM version (copper disk), Select version (bulk license), and an NFR (partner program) version of XP Pro with SP2 and they all worked. On my MacBook Pro's I use boot camp to split the disk in two, reboot using the Windows CD, and pick the partition to format it.
Apple states that you need a full version of Windows, and the OEM versions are slightly different from the commercial versions, but both should work. On my Mac Pro, I created a 3-disk OS X RAID-0, and left the 4th disk alone. I rebooted with the Windows CD and installed Windows to the 4th disk without Bootcamp at all. Once Windows was installed, I used the Leopard disk to install the Bootcamp drivers. The Mac side has no Bootcamp installation but I can still choose between the volumes by holding down the option key at boot time or by setting the startup volume in the OS X Startup disk preference pane.
The solution to use virtualization, unfortunately, will not work for many situations where graphics are involved. Most current major products, such as AutoCAD, 3dsMax, and so forth, will not run properly or at all without specific DirectX 9 or OpenGL support. To date both Parallels and VMWare do not completely support DirectX or OpenGL.

I have an iMac with mountain lion 10.8.3 with boot camp 5.0.2 .i installed windows 7 -64 bit with boot camp but the boot camp didn't install drivers for windows please guide me for trouble shooting .

i have an iMac with mountain lion 10.8.3 with boot camp 5.0.2 .i installed windows 7 -64 bit with boot camp but the boot camp didn't install drivers for windows please guide me for trouble shooting .

Kappy wrote:
Boot Camp doesn't install the drivers. You have the drivers on a separate USB device if you followed directions. Once in Windows connect the USB drive with the driver software. It should startup automatically and install the drivers.
You don't even need to do that. As downloading the drivers from within Boot Camp Assistant can be unreliable, it is better to get the package directly from here:
http://support.apple.com/kb/DL1638
Copy the .zip file to a USB flash drive or burn it to a DVD in OS X. Install Windows as normal, insert the flash drive/DVD in Windows, copy the .zip file to the hard drive, extract it, then run the setup executable.

Crysis Warhead 64-bit Won't Work with Windows 7 64-bit Under Boot Camp

Hi. I installed the patch 1.1 for Crysis Warhead which has the 64-bit version of the game which I'm running under Windows 7 64-bit on Boot Camp and I've tried the the compatibility mode (Vista to Vista SP2). I've also updated the ATI drivers as well as the Boot Camp drivers. I'm using the latest Snow Leopard.
When I click on the game's application (64-bit version), it would launch then it goes black with just the mouse cursor (you can move it about) which seems to be in low resolution and I guess it would crash so I would push the button on this late iMac 2009 and Windows would go back to the desktop then shutdown.
Has anyone made Crysis Warhead 64-bit work with Boot Camp Win7 64-bit with this iMac (it has the ATI 4850)? Is this because it's Boot Camp or that it's Windows 64-bit or is it the ATI graphics chip? Thank you in advance. Gbu.
Message was edited by: Alvin777

since bootcamp allows windows to run natively, it's not an imac issue, but rather an issue with your windows, so you probably get better answers in a windows forum or the crysis forums.
in any case, installing newer ATI drivers (ati.com) might help, but it's just a wild guess

What difference does it make if you have boot camp beta and it has expired

I have an imac w/OS 10.4.11--when i purchased it several years ago i had it partitioned and had windows xp installed. when i purchased this several years ago, they were using boot camp beta to do this.
recently i found out that the boot camp beta expired. the problem is i don't see how it has affected my windows or my mac. i don't see any difference.
the only problem i have is that i can't access the internet from the windows xp--*is this something that upgrading my OS and using the full bootcamp would correct?*
if not, then why should i upgrade the OS to Leopard using the final version of boot camp--what will i be able to do that i can't do now _from the WINDOWS XP perspective?_ ( i assume there are advantages from the Mac perspective, but nothing i can see that i need there--i look at the internet, play games (not action games), and write documents).

hi iatrosm,
Yes, i had internet access from both windows xp and from mac for about a year and a half, and then one day the windows access 'disappeared'
i had a microsoft certified technician (son of a friend who also works in the field) come and look at it.
we could only find that for whatever reason the modem was not receiving the signal any longer from windows. the windows showed that the modem was receiving it.
That's indeed very odd.
naturally apple said it was a windows problem and microsoft said it was an apple problem.
my personal feeling is that it is a hardware problem--but the issue is receiving from windows.
the modem works fine from my mac side.
Is this a dial-up modem or part of DSL ?
And how is it connected (ethernet...) ?
Has it some sort of self-test feature or the possibility for a full reset ?
While hardware can break, it usually breaks completely, not OS-dependent.
Is the modem shown in the Device Manager of Windows (Control Panel - System - Hardware) ?
Any system updates you have installed in Windows prior to the failure of the modem ?
Any Firewall settings changed ?
Stefan

Can professional software and 3D graphics be used in Boot Camp Beta 1.3?

I am using professional equipment that normally operates on a Windows OS with software using .NET Framework 2.0, DirectX 9.0c.
- If I am to use this software do you think it will work in Boot Camp Beta 1.3 using Windows XP Pro (2)?
- The software has a 3D imaging feature hence the DirectX 9.0c so do you think this will also work?
- Does Apple have a service where they can answer these questions other than this forum?
I am new to Apple and not at all computer literate so please keep this in mind when sending your replies. Really apprecaite any help that you can provide.

Running Windows on a Mac via Apple's Boot Camp is absolutely no different than running it on any other PC, as Macs are PCs. So if it works on your current PC, it will work on you Mac.
Further questions regarding Boot Camp should be posted in the Book Camp discussions:
http://discussions.apple.com/forum.jspa?forumID=1165

I have usb driver in may macbook pro 15 retina. When I installed windows 7 and try to download windows support into a CD, boot camp always said it couldn't find my usb driver.

I have usb driver in may macbook pro 15 retina. When I installed windows 7 and try to download windows support into a CD, boot camp always said it couldn't find my usb driver. My mac version is 10.8.3

Welcome to the Apple Support Communities
Install the Windows support software from the USB drive. Note that Boot Camp Assistant, in OS X 10.8.3, doesn't support the option to burn the Windows support software into a disc.
Instead, you can try a different thing. Start in Windows and download the Windows support software in it > http://support.apple.com/kb/DL1638 Then, decompress the file and run the Boot Camp drivers installer.
If you can't access to the Internet in Windows, start in OS X and download the Windows support software from the same link. Decompress the file, right-click the folder which will show up after decompressing the file and select "Burn". Finally, start in Windows and install the Boot Camp drivers

Windows will not recognize my ipod

My windows will not recognize my ipod. I tried running the latest Ipod Updater several times and received the following error message: Ipod requires Windows 2000(SP) or Windows XP, Please update your software and try again. I have Windows XP so I'm a bit confused to why I'm receiving that error message.
Any suggestions would be greatly appreciated. BTW, I already tried "re-starting" my ipod and that didn't work either.

Unfortunately, there is no one ‘Silver Bullet’ answer for this issue. Many things can contribute to the problem. Here are various ‘generic’ solutions that you can try in an effort to correct your problem. One should work. These are listed in simplest to more involved order (usually).
First, make sure that the iPod is fully charged.
Try Resetting Your iPod while it's connected to the computer.
Hold down the Menu and Select buttons until you see the Apple logo (or Menu & Play/Pause in older models).
This will often get it recognized. It may take several attempts.
Try closing and re-starting iTunes. There have been cases where iTunes refuses to see an iPod, but after re-starting, it works again.
Also try re-booting the entire computer. Especially if the PC has been operating for a long time &/or many programs have been opened and closed, repeatedly.
Other USB connected peripherals may be the cause as well. Try removing all connected USB items and attaching the iPod. If you have a USB keyboard, it may be worth a try using the adapter to convert it to non-USB. If the iPod connects, continue plugging things back in until you have the problem return. You may have then isolated the issue. Sometimes it could be a printer, camera, Flash Card reader, or other attached device causing a conflict.
If your iPod shows up in Explorer under 'my computer' try changing the drive letter:
-- Click on Start=>Control Panel=>Admin Tools=>Computer Management=>Disk Management
-- Right-Click on the iPod and select “change drive letter”
-- Choose something further along in the alphabet that is unused (Usually, “M”, “N”, “O” or something similar)
-- Safely eject the iPod
-- Reboot the PC
If that doesn't work, Put Your iPod into Disk Mode then plug it in and you should be able to Restore the iPod
Your PC may have difficulty with the USB2 protocol and the iPod. See this Article for a possible solution: iPod not Recognized Correctly
Also try these hints (and the other suggestions above) from any other USB port you may have on the PC. Sometimes switching USB ports can make all the difference.
Also See:
Your Windows PC doesn't recognize iPod
iPod does not appear in iTunes or on the desktop
iPod appears in Windows Explorer but does not appear in iTunes“Strange iPod Behavior within Windows”
If you are getting a ‘Missing Drivers’ message, try this:
1. Go to http://www.driverguide.com and register (free)
2. Download ‘usbstor.sys’ & ‘usbstor.inf’ to your PC and place them in your i386 Folder
3. Update both drivers by selecting the two files you just downloaded
4. Reboot computer
5. Open iTunes and then connect you iPod
If all the above fails, you may have a Virus, Malware or SpyWare problem.
If you do find that your Device Manager is blank, you should probably check up on this issue first: No Items Appear in the Device Manager List When You Open It

Windows file not recognizable by Boot Camp Beta 1.3

Similar Messages

Maybe you are looking for