Windows File Share doesn't work over RV042 QuickVPN

I have two sites, one has an RV042 and the other an RV042G, and there is an IPSec tunnel between the two.
Windows file sharing works between these two over the tunnel.
I have a laptop with QuickVPN Client which I use to connect to either site.
If I connect to the RV042G site, file sharing works fine.
If I connect to the RV042 site, I can't get file sharing to work.
As far as I can see, both routers are set the same.
Can anyone help here?
Thanks in advance.

Good morning
Hi Dominic, thanks for using our forum, my name is Johnnatan and I am part of the Small business Support community. You´d better don´t turn off your Windows Firewall, you have just to configure it, you can do it follow these steps:
https://supportforums.cisco.com/docs/DOC-29399
I hope you find this answer useful,
“Please rate useful posts so other users can benefit from it”
Greetings,
Johnnatan Rodriguez Miranda.
Cisco Network Support Engineer.

Similar Messages

  • In my wife's window, the sound works, when I switch over to my window the sound doesn't work.  I noticed the problem when I went to a YouTube video.  How do I correct this?

    In my wife's window, the sound works, when I switch over to my window the sound doesn't work.  I noticed the problem when I went to a YouTube video.  How do I correct this?

    Hello Kiira Doon,
    The troubleshooting steps detailed below may help get your iPhone's display to function.
    Toggle the ringer switch to see if the unit vibrates. If it does, it could be that iPhone is getting power, but is not displaying any image.
    Try turning iPhone off and then on again.
    While connected to the iPhone charger, try to reset the iPhone.
    If the low-battery screen appears, charge the iPhone.
    My issue is still not resolved. What do I do next?Contact Apple Support.
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Cheers,
    Allen

  • I can't open wmv files with Lion.  Windows media player doesn't work.  Any suggestions?

    Unable to open wmv files using Lion.  Windows media player doesn't work.  Are there any suggestions.
    Thanks

    Lynnie Marie  ---
    macfriedchikkin's reply would make sense to you if you were trying to open a camera, but if you are trying to view streming media from a web site that is a different story. It helps to be very specific about what you are tyring to do on these forums.
    I belive you would go into Firefox Preferences menu and tell it  to use VLC as the application to play WMV files. I'm still running Tiger,  however, so I can't tell you if it the latest version works wel that way. The Tiger version doesn't seem to, but a lot may have changed since then. (I'm only just getting around to installing Leopard next week now that there are too may apps I can't run on Tiger. ) Perhaps someone else on this forum can better help you set  up the player in your browser.
    Or you can cut out the middleman and give VLC the direct video URL:
    Choose Open File from the File menu and paste in the URL of the video, say,
    http://azul.streamguys.com/auduboncal-1
    or http://azul.streamguys.com/auduboncal-2
    Your media should play this way. Dont forget to save the playlist for later.
    I'l keep investigating on my end, and yes, I'm also  encouraging certain people who are streaming windows media in to switching to a different format
    Best --
    G

  • When i convert a word file with a hyperlinks to a PDF file it doesn't work ?? thanks in advance for helping me

    when i convert a word file with a hyperlinks to a PDF file it doesn't work ?? thanks in advance for helping me

    using microsoft word.
    the hyperlink doesn't work in the pdf file (adobe reader).
    adobe reader xi.
    my operating system windows 8.1.
    the attached screen is appeared.

  • Windows File Share configuration from AIX Portal

    Hi,
    we want to connect a Windows file share as  KM  Repository to a portal running on AIX.
    The network path is configured using jCIFS and user (DOMAIN.NET\USERNAME) is entered with password. The corresponding path is also entered in the FS Repository manager using ACLSecurity manager. A Windows System is not configured .
    In the repository managers monitoring view our new repository manager shows a green button. In the KM however, it is not visible. The portal log shows the following error:
    "Cannot retrieve credentials from URL for file 'DOMAIN.NET; USERNAME/' "
    We tried to connect the file share with the same user/password. This worked fine.
    Is there something else to configure ?
    Any help will be appreciated.
    Thanks
    Marcus

    Hi,
    the problem was the passwort. Using "?, %" or other special characters interpreted in a URL may not be used.
    After changing password to a alphanumeric everything works just fine.

  • Windows file share, finder issues

    Hello-
    At my work we have a Windows 2008 R2 file share that our mac computers connect to. all of the mac computers have snow leopard running on them. A few times a week finder either stops responding and crashes, or cannot connect to the file share. Once the machine is restarted, it works fine for a little while. This seems to be a never ending cycle. Is there anything I can do to make the performance better on a Mac connecting to a windows file share?
    Thanks
    Ryan

    Hi,
    the problem was the passwort. Using "?, %" or other special characters interpreted in a URL may not be used.
    After changing password to a alphanumeric everything works just fine.

  • Windows 8 - hyperlink doesn't work....how do I fix? I already tried PDF/A Never...still doesn't work.

    Windows 8 - hyperlink doesn't work  how do I fix? Already tried to PDF/A Never, still doesn't work.Collaboration & Commenting

    What country are you in?  Is YouTube legal there?

  • I bought an external hard drive for backups to use with Time Machine, but however when I try to connect it with the other windows laptop it doesn't work ? intact it doesn't work on any other device except my MAC ?

    I bought an external hard drive for backups to use with Time Machine, but however when I try to connect it with the other windows laptop it doesn't work ? intact it doesn't work on any other device except my MAC ?

    Do not worry about it.
    Time Machine needs that your external drive is formatted in HFS+, or better known as "Mac OS Extended (Journaled)". This filesystem is used by Apple on Macs and Windows cannot read or write drives formatted with this filesystem, being this the reason why all your devices do not read the external drive except your Mac.
    You can only use your external drive to make Time Machine drives. If you store anything different, you may damage the Time Machine structure, so it is better not to use it as a drive to store other data. Instead, get another external drive to do it or create a second partition on the external drive formatted in FAT32 by using Disk Utility > http://pondini.org/OSX/DU3.html FAT32 can be read by Windows PCs

  • TS3704 How are you supposed to fix "The feature you are trying to use is on a network resource that is unavailable" alert appears when you remove Apple software in Windows if it doesn't work on Windows 8 or 8.1???

    How are you supposed to fix "The feature you are trying to use is on a network resource that is unavailable" alert appears when you remove Apple software in Windows if it doesn't work on Windows 8 or 8.1???

    See Troubleshooting issues with iTunes for Windows updates. You may have to uninstall what you can, reboot and delete the named folders, then reinstall.
    tt2

  • I have an iPhone 4S.  When I try to print pictures, from my Windows computer, it doesn't work.  Open Office also gives me an "unknown graphic" message.  These are JPEGs, aren't they?  Why can't I print and what is the unknown graphic?

    I have an iPhone 4S.  When I try to print pictures, from my Windows computer, it doesn't work.  Open Office also gives me an "unknown graphic" message.  These are JPEGs, aren't they?  Why can't I print and what is the unknown graphic?

    Hi,
    "A day after the name change became official my built in skydrive app stopped working"
    Did you point that SkyDrive changed to OneDrive?
    Did you move your OneDrive to another location or change its name?
    Please login OneDrive with web-based to check if you could access it successfully.
    Please refer to the following article to try the troubleshooter and check the service status:
    SkyDrive: FAQ
    http://windows.microsoft.com/en-in/windows-8/skydrive-app-faq
    Karen Hu
    TechNet Community Support

  • Issue with G4 connecting to a Windows File Share

    We have a single MAC G4 that our marketing department uses for graphic development. when we first setup the PC we were able to connect to our Windows shares on the network. For better than a year now we have had intermittent problems with connecting to our Windows file share. It would drop the TCP connection to the file share, you would need to go back a re-authenicate to the share. Two weeks ago the problem worsened, we can't connect the to Windows files share at all now. I have tried different users accounts including my own which has domain admin authority. However I have a samba file share and a snap server running on the network and I am able to connect to these machines with no issues. I suspect a configuration problem, but not sure where to look next.
    The MAC is running the following OS version and Kernel
    OS 10.3.9 (7W98)
    Kernel Darwin 7.9.0
    Any guidance would be appreciated

    I just figured it out myself.

  • Unable to Connect to Windows File Shares

    Steps I take to attempt to connect to a Windows File Share within the office. Being relatively new to the Mac, I am curious on why I am not able to connect to Windows File Shares.
    1. Command-K
    2. Server Address: smb://[server-hostname]/[sharename]
    3. Click Connect
    4. Connecting To Server..... (takes a short amount of time)
    5. SMB/CIFS File System Authentication
    - I then enter the domain, username and password
    6. Click OK
    7. Error: Could not connect to the server because the name or password is not correct.
    What gives? I have confirmed and validated server hostname, sharename, appropriate persmissions for windows account, etc. I have tried IP Address instead of hostname, same outcome.
    Any Ideas?
    MacBook Pro 17"   Mac OS X (10.4.8)  

    Hi Arus, not really a Windows® expert, but I think I've seen were putting the Domain name in there fixed it, but I can't find the exact way to do it, this is the closest I could find...
    "If I try to connect to smb://domain, that's when I can authenticate. If I try smb://machine/share, I still get the error -43."
    http://discussions.apple.com/thread.jspa?messageID=4727809&#4727809

  • Facetime, imessage and find my ipad doesn`t work over wifi but they work over 4g

    Facetime, imessage and find my ipad doesn`t work over wifi but they work over 4g, please help me

    Are you sure?
    According to Apple Facetime will only work over WiFi. IOS 6 will bring feature that you can make Facetime call over 3g-4g

  • My email account blocks the verify now hyperlink when I try to click and open to verify my apple ID.  I have tried to copy and paste in the browser window, but that doesn't work either.

    My email account blocks the verify now hyperlink when I try to click and open to verify my apple ID.  I have tried to copy and paste in the browser window, but that doesn't work either.

    Have you tried accessing the email from another computer, device, email client or web browser?

  • Browsing Windows File Shares not working

    I'm trying to integrate Macs into our Windows and Linux Network. After finally getting a stable Active Directory binding (Article TS3248 http://support.apple.com/kb/TS3248?viewlocale=en_US) the remaining challenge is for our users to browse for Windows (Samba) servers. That is, visible in "Networking" or the Side Panel under "SHARED".
    At the moment the users are able to connect to all file shares by using "Connect to Server ..." and typing "smb://host/share" so we know that Kerberos is working well (AD Integration). The variation "smb://someuser@host/share" and providing a password also works. When the file share is mounted it is displayed under "Shared"
    Searching on the net led me to check /private/var/log/samba/log.nmbd file. Every five minutes the following error message is logged:
    \[2011/03/16 13:04:04, 0, pid=113\] /SourceCache/samba/samba-235.5/samba/source/libsmb/nmblib.c:send_udp(793)
    Packet send failed to <WINS server IP>(138) ERRNO=No route to host
    This doesn't make sense since this host is pingable and is on the same subnet (i.e. no route). An additional observation is that Windows XP machines that are NOT bound to the domain are browsable. The problem applies both to Windows Server 2008 as well as CentOS 5.5 servers running Samba.
    Google search has turned up nothing. Based upon my experience with other Samba implementations, this may be a bug in OS X. Anyone out there having the same problem or a resolution?

    I have a similar problem, and have seen something somewhere about a difference in AD in windows 2003 server and Windows 2008 server based networks. It also seem to be related to the lack of wins in modern Windows 2008 R2 functional level domains. I haven't been able to rule this out yet, but the problem for me is similar. MAC client running 10.6.x cannot see Windows computers under shared unless it's already mounted. I haven't been able to test this with OS X 10.7 yet.    

Maybe you are looking for