Windows file sharing can no longer work after tiger upgrade

hi guys, ive been searching the web to find a cure on my problem for a long time now, but still no success, hope someone could help me out.
ok heres my problem, before the upgrade, file sharing with windows is perfect, with no problems at all, but when i upgraded one of our mac to tiger, windows file sharing is not working anymore, i cant connect or see my windows xp computer on the network and vice versa, windows cannot see my mac with tiger on the network.
Our other 2 macs here running in panther are fine( meaning, windows file sharing is working)
Now we've bought a new computer which is a mac pro with fresh install of leopard, i setup the windows file sharing, but i was surprised that i cant see my windows xp box too on the network, and vice versa, the pc cant see my mac pro too on the network, whats wrong with tiger and leopard file sharing???? please help me, im so frustrated cant make it to work. i know, my pc computer has nothing to do with it, coz i can still connect to a mac with panther os. hope someone can help me fix this... please..

This site has some information on file sharing and printer sharing between Windows and Macs for various combinations of OSs. The Leopard repository isn't quite as mature as the Tiger repository, but there's a lot of good information at this site. Hopefully, it will be helpful to you in resolving your Windows/Mac issues.

Similar Messages

Forms HOST command no longer works after database upgrade from 10g to 11g

Hi,
After upgrading the database 10g to 11g the forms HOST command no longer works on Unix server. The form used to work fine prior the upgrade. I read all the threads I could find and did not see any solutions. Adding PATH and LD_LIBRARY_PATH does not work because it does not even run a basic shell script. (I saw this solution, adding PATH and LD_LIBRARY_PATH, in many questions / threads).
1. I wouldn't expect the database upgrade to be an issue, but it is the only change we had.
2. Note, 11g is Oracle Fusion Middleware which is quite a bit different than 10g.
I even tried the most basic commands like "echo" which is a build-in Unix command and there is no directory for it (ie. no /usr/bin - so variable PATH is irrelvent). i.e HOST('echo hi'); and HOST('echo "hi" '); and even HOST ('echo hi > /my_file.txt'); all returns FORMS_FAILURE (actually the if is IF FORM_SUCCESS THEN ... else ... and the else part always runs now - whereas it didn't before.).
Or basic commands like /usr/bin/ls as in HOST(/usr/bin/ls). At that point I was just testing the Unix command would return FORM_SUCCESS even though I could not see the results (because they weren't writing to a log file). Notice that I'm using the direct path /usr/bin so no Unix environment variables were needed.
The form does use webutil but that part works. For example, we have webutil_file_transfer( ....) The file shows up on the application server and in the expected directory.
Here's the main goal. Upload a file from clients local PC to the datebase server. The form uploads the file to the Application server, then we have a Unix script to scp (secure copy) the file from the application server to the database server. IF webutil, or any other Oracle functions could put the file on the database server that would be better. But, I don't know of any procedures that do that - or would have done it cleanly (i.e. storing to database and write back to server and then using a blob etc. )
Anyway, I was hoping someone would help with either of these.
1) Get the HOST command to work. - If we can get that to work then I wouldn't need any more help. We can just call the already existing Unix script to copy the file from the application server to the database.
2) OR be able to upload directly to the database server - wanted to do that originally
Any help would be appreciated

Solution for those interested and for anyone else searching this forum for a solution
I found this on My Oracle Support:
<h3>Host Command from Forms Not Working in 11g in Sun Solaris Sparc OS [ID 1157346.1]</h3>
Applies To: Oracle Forms - Version 11.1.1.1.0 and later
Sun SPARC Sun OS
Symptoms:
When trying to execute a Shell script or any OS command using the host() Built-in from Forms 11g, the host()command is not getting executed. The same functionality works on other operating systems and in previous versions like 10gR2.
Steps to be followed:
1) Take a backup and edit the $DOMAIN_HOME/config/fmwconfig/servers/WLS_FORMS/applications/formsapp_11.1.1/config/default.env or any custom environment file.
2) Locate the following environment variable:
LD_PRELOAD=/ora10gas/app/11.1.0/Middleware/as_1/jdk/jre/lib/sparcv9/libjsig.so
3) Comment out this variable. After the changes, it will look like the following:
#LD_PRELOAD=/ora10gas/app/11.1.0/Middleware/as_1/jdk/jre/lib/sparcv9/libjsig.so
3) a) Instead of LD_PRELOAD, kindly use LD_PRELOAD_64 as given below :
LD_PRELOAD_64=/ora10gas/app/11.1.0/Middleware/as_1/jdk/jre/lib/sparcv9/libjsig.so
(This makes HOST AND RUN_REPORT_OBJECT work fine).
4) Save the file and execute your forms. The Host() built-in will work as expected
The LD_PRELOAD setting in default.env is only required for the working of signal chaining facility in JVM version 1.5 and later. If you are not using theSignal chaining facility, this variable is not required. For more information, refer to the following documentation
http://download.oracle.com/docs/cd/E14571_01/doc.1111/e14772/forms.htm#CJAJGAFF

ITunes no longer working after Song Upgrade.

I got onto iTunes store, was offered to upgrade 32 of my songs, I said "Yes". After the upgrading completed, iTunes main window pane no longer worked for anything but the iTunes store. It will play my music if I manually select it from the disk (via Finder) but does not seem to be able to display any of my playlists or my music library.
I am running Safari 3.0 (as an FYI).
Mac OS X 10.4.9 (on an intel mini).

Unfortunately uninstalling and reinstalling, or repairing the current copy of iTunes alone doesn't fix the problem....
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

Scan via Preview no longer working after Lion Upgrade

After upgrading to Lion, I can no longer use Preview to scan a document from my Kodak ESP9. I have a range of issues, but the most common is that after telling preview to look for networked scanners, and then selecting the Kodak, it open a box that should automatically start a preview scan. Instead, the box shows the SCAN and OVERVIEW button but nothing else, the screen is jsut blank.
I have updated Kodak's sofware and firmware to Lion versions.
Anyone have an idea how to get this working again? It was flawless before the Lion upgrade.
Thanks.

Please follow these instructions:
Lion: Connecting to legacy (pre-Lion) AFP services - and Mac OS X (server):
https://discussions.apple.com/thread/3258472

Screen saver no longer working after Lion upgrade.

Hi,
After standard upgrade about 2 weeks ago (mid July 2012) the screen saver no longer works. I mean I can certainly access the application and the desktop can be made to cycle through different photos etc. But when I configure the screen saver it just refuses to go into screen saver mode at all.
I'm not seeing too much occurance of this through the postings which is a bit worrisome as I'd thought this would be a much wider issue.
Cheers,
Herbie

Please follow these instructions:
Lion: Connecting to legacy (pre-Lion) AFP services - and Mac OS X (server):
https://discussions.apple.com/thread/3258472

Printing No Longer Working After Recent Upgrade

My printing suddenly stopped working after the latest upgrade (which upgraded the kernel from 2.6.15.2 to 2.6.15.4).
I discovered that arch is no longer auto-loading the parport_pc module. This is strange. If I run "hwdetect --show-modules", parport_pc is shown.
I do have MOD_AUTOLOAD="yes" in my rc.conf file.
The quick fix is to add "parport_pc" to the list of MODULES in rc.conf.
Are others having this problem?
Rob

I just read your post. I am sorry I could not join irc. I was actually at work. It is very hard for me to use irc at work. Firewalls make life difficult!
In any event, I think I solved the problem.
Please see http://bbs.archlinux.org/viewtopic.php?t=18747
Here is the complete post:
In my /etc/modprobe.conf file, there was the folloiwng line:
# Load lp support with parport_pc
install parport_pc modprobe -i parport_pc ; modprobe lp ; true
I believe that this line was in the original /etc/modprobe.conf file that came with arch 0.7. I don't remember ever adding it.
I commented out this line and I removed "parport_pc" from the list of MODULES to be loaded in /etc/rc.conf.
I rebooted and it worked. The modules lp, parport and parport_pc were all autoloaded at boot-up.
I should also note that right after the arch upgrade, I was experiencing CUPS daemon failure once and awhile at boot up. Somtimes cupsd loaded and sometimes it failed at boot up. Now it seems that cupsd loads reliably at every bootup. Problem solved!
The following are the remaining lines in my /etc/modprobe.conf:
# Load ppp-generic with modem drivers
install Intel536 modprobe -i Intel536 ; modprobe ppp-generic ; true
install Intel537 modprobe -i Intel537 ; modprobe ppp-generic ; true
install ltmodem modprobe -i ltmodem ; modprobe ppp-generic ; true
install ltserial modprobe -i ltserial ; modprobe ppp-generic ; true
install slamr modprobe -i slamr ; modprobe ppp-generic ; true
install slusb modprobe -i slusb ; modprobe ppp-generic ; true
# OSS Compatibility
#install snd-pcm modprobe -i snd-pcm ; modprobe snd-pcm-oss ; true
#install snd-seq modprobe -i snd-seq ; modprobe snd-seq-oss ; true
# --- BEGIN: Generated by ALSACONF, do not edit. ---
# --- ALSACONF version 1.0.10 ---
alias snd-card-0 snd-opl3sa2
alias sound-slot-0 snd-opl3sa2
options snd-opl3sa2 fm_port=-1 midi_port=-1 port=0x538 wss_port=0x530
options isapnp=0 dma1=1 dma2=0 irq=5
# --- END: Generated by ALSACONF, do not edit. ---
The modem driver lines came with the original /etc/modprobe.conf file in arch 0.7.
Should I also comment them all out?
Perhaps I should only have the lines for my old ISA sound card in the /etc/modprobe.conf file. Please let me know.
Has there been a change in the kernel or udev which makes it neccesary to make all these changes in the /etc/modprobe.conf file?
Rob

Flashcards for screen brightness no longer work after BIOS upgrade

I have a Toshiba Satellite T135D/1320S laptop, and last night I upgraded the BIOS to v1.90 under the recently released recall notice. AFter installing the BIOS, however, the Flashcard brightness controls no longer work. Whenever I press FN-6 or FN-7, the screen brightness Flashcard pops up and the toggle on the slider bar moves back and forth, but the brightness of the screen does not change.
I have disabled and re-enabled the Flashcards as suggested in a separate forum, and I've also downloaded the most recent display driver (AMD display driver v8.615). Neither effort corrected the problem.
Anyone have any other suggestions?

Satellite T135D-S1320
Sometimes it helps to reset the machine. With the battery and AC adapter removed, close the Power switch for half-a-minute. Re-attach those, press the Power button to turn the computer on, and then immediately press the F2 key while the Toshiba logo is displayed. Press F9 to restore the BIOS default settings, press F10, and then select Yes (Exit Saving Changes). The computer will restart.
Another things to try is reinstalling the TVAP.
Toshiba Value Added Package for Windows 7 (64)
-Jerry

IPad messages no longer works after ios7 upgrade

After upgrading to ios7 on my iPad messages no longer works.
After I enter To: I am unable to get to the message field to enter the message.
Reboot does not solve the issue,

This issue has been resolved!

SD CARD READER NO LONGER WORKS after IOS upgrade. Help!

Does anyone have a suggestion as to how I can get my sd card reader working again? My generation 1 iPad worked fine with it until I updated to IOS5. Today was the first time trying to upload pics since the upgrade. Nothing. Not even an error message. I rebooted and still nothing. SoTHAT was $30 well spent. So now, in order to get the pics onto my iPad, I am sending the pics to myself from my HP laptop, opening the emails on the iPad, and saving from there. The card reader used to work great for pics and videos. Gotta love it when upgrades make so I can no longer do before the "improvements." I would just return the camera kit/card reader, but I purchased it a year ago, so that bird has flown. Suggestions?
Thanks in advance and Happy Holidays!
Scott in Barrington, Rhode Island

Harry Manko wrote:
Can we get Apple to fix this...PLEASE?
This is a user-to-user forum. To make sure Apple gets your feedback, use the appropriate link on this page:
http://www.apple.com/feedback

Why does my camera no longer work after ios7 upgrade?

I've had my iphone 4s for 1 year and LOVED it until I upgraded to the ios7 last week. Now, my formerly beautiful camera (which was the only camera that I took with me to Europe last year - by holding the shuttter button down until I could capture a perfectly still photo, I took the most amazing pictures) mostly takes blurry photos. If the subject moves, forget it - it's all a blur. I hate it now. Not only that, I used to be able to access my university Moodle site with my phone - since the upgrade, I can no longer log in. Brutal. Thanks alot, Apple!

Okay. The following troublesshooting document is probably worth trying with those symptoms:
http://support.apple.com/kb/TS1967

Illustrator will no longer work after Yosemite upgrade!!!

I downloaded Yosemite on my Macbook Pro and now Illustrator will no longer work. A warning pops up that I need the newest Java runtime which I already have. What should I do? Please help

Prompted to install Java SE 6 Runtime | Mac OS 10.9
Mylenium

IPad 2 hdmi to tv no longer working after ios8 upgrade?

Hi,
Would anyone know why my hdmi to TV cable is no longer supported after upgrading to ios8 please?
When connected, the system states that the device is not supported but was fine with ios7.
Hopefully this is a bug but if not, feel reluctant to update ever again!
Thank you in advance..Neil.

Hi,
Would anyone know why my hdmi to TV cable is no longer supported after upgrading to ios8 please?
When connected, the system states that the device is not supported but was fine with ios7.
Hopefully this is a bug but if not, feel reluctant to update ever again!
Thank you in advance..Neil.

Screen sharing option no longer works after updating to iOS Maverik. I am using AIM and so is the other person who i am trying to share my screen with. .

I am using AIM and so is the other person who i am trying to share my screen with. I log into AIM with an @aol.com account. I can request to share my screen and share the other person's screen. The window will pop up on the other computer, but after clicking accept it will go back to saying that there is a request for screen share. What should I do to fix this?

HI,
To be clear, iOS = iPhone and iPad and some iPod Touches and the Operating System they use.
Mac OS X = the Operating System Mac computers use.
Regarding the AOL account, is this actually from AOL and have the Chat/Messaging option enabled ?
Or is it a Name registered with the AIM part of AIM ?
You can have AOL as your ISP and have an email and User ID from them.
This needs to have the ability to use the name as a Chat name enabled (or at least it used to)
AIM, which actually stands for AOL Instant Messaging has it's own registration site.
Nowadays you register for a AIM email (although activating it for mail is another additional step).
It used to be that the bit before the @aim.com bit was the user name you used in Chat applications that could use AIM.
Previous to the current system you could in fact register just a Screen Name with them.
Apple (and a few US based ISPs) also have agreements with AIM that their (Apple, etc.) emails are recognised as Valid AIM Screen Names.
This means those issued by Apple ending in @mac.com, @me.com issued from the iCloud registration and @icloud.com.
(You do have to keep your password to 16 characters or less.)
From what you are saying you seem to be sure that you can see each other as On Line in your respective AIM Buddy lists ?
In Messages in both Mountain Lion and Mavericks you do not have to display the Buddy lists
(See the Window Menu plus the General Section of the Preferences to separate them)
Are you also saying that in the Video menu the option to allow Screen Shares is Enabled ?
Is it done at both ends ?
In iChat you could offer to Share your Screen with a Buddy without the option being On (they could not ask to share yours or offer theirs). I have not tested this in Messages.
6:55 pm Sunday; November 3, 2013
 iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Backup drive no longer working after Lion upgrade

After upgrading to OS Lion, WD network hard drive is no longer supported by Time Machine. It was working fine on Snow Leopard. Is there a setting that will allow me to get my data back?

Please follow these instructions:
Lion: Connecting to legacy (pre-Lion) AFP services - and Mac OS X (server):
https://discussions.apple.com/thread/3258472

Hyperlinks no longer working after browser upgrade

IE works fine
Firefox does not open websites after clicking hyperlinks

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Windows file sharing can no longer work after tiger upgrade

Similar Messages

Maybe you are looking for