Windows folder shows when networking, but not contents.

Greetings,
I am using my MacBook Pro (client) to network wirelessly with my PC (server) using Windows file sharing (XP). I have three folders that I share. All three show up, but only two of them show their contents. I have checked and rechecked my share settings on the folders on the PC, and I swear they're identical. Any thoughts?

Upon further review...
After slogging around Windows networking troubleshooter, I was able to view the permissions on each folder, and changed the one that wasn't configured correctly. Why two of them worked by simply checking the share box, and one didn't is still a mystery, but it's working now.
Thanks for your reply, it nudged me in the right direction!

Similar Messages

  • My macbook pro shows some wifi networks, but not mine. i dont know whats wrong, the wifi networks works on my phone as well as other laptops.

    my macbook pro shows some wifi networks but not mine. it comes up on other computers as well as my phone but will not show up on my wifi network options.

      Direct you to the proper forum for MacBook :
    MacBook Series Forums
    https://discussions.apple.com/community/notebooks?view=discussions
    https://discussions.apple.com/community/mac_os?view=discussions 
    http://www.apple.com/support/macbookpro

  • WRTG54S Connect to network but not internet

    I have a WRTG54S and Mediacom 12mbps. My router worked fine on my old laptop (a Dell running Vista) It sat in a box for about 6 months and now that I have a new one (Sony running 7) I can connect to my network but not the internet. I have upgraded the firmware from 7.6 to 7.8 with no change. I have tried no security, wep, and wap with no change. I also cloned the MAC, again no change. Windows cannot detect any problems and when I try to enable the router to connect to the internet it always says connection failed. I can connect when directly wired to the modem but not when wired to the router or wirelessly. Any ideas? Thanks
    Solved!
    Go to Solution.

    Wire your computer directly to your modem, open a command prompt window and enter "ipconfig /all". Post the full output. That will show what kind of modem you have and what the best configuration for your WRT should be.

  • Html Validation icon shows in IE but not in Mozilla

    html Validation icon shows in IE but not in Mozilla
    Hi, All,
    I use DWMX 2004
    I placed the hmtl validation icon at the bottom of a template
    so that
    each page could be conveniently validated.
    The icon is showing all right, both locally and online, in
    IE, but it is
    not showing in Mozilla.
    What can I do to fix this?
    www.tudo.co.uk/testing/rishton/shell/contents/contact/contact.html
    The icon should appear underneath the up-arrow at the bottom
    of the page.
    Here is the template, with html extension for your
    convenience:
    http://www.tudo.co.uk/testing/rishton/templates/rishton_template.html
    Thanks.
    Adrian

    Joe Makowiec wrote:
    > On 29 Apr 2006 in macromedia.dreamweaver, wrote:
    >
    >
    >>html Validation icon shows in IE but not in Mozilla
    >>
    >>Hi, All,
    >>
    >>I use DWMX 2004
    >>
    >>I placed the hmtl validation icon at the bottom of a
    template so
    >>that each page could be conveniently validated.
    >>
    >>The icon is showing all right, both locally and
    online, in IE, but
    >>it is not showing in Mozilla.
    >>
    >>What can I do to fix this?
    >>
    >>www.tudo.co.uk/testing/rishton/shell/contents/contact/contact.html
    >>
    >>The icon should appear underneath the up-arrow at the
    bottom of the
    >>page.
    >>
    >>Here is the template, with html extension for your
    convenience:
    >>
    http://www.tudo.co.uk/testing/rishton/templates/rishton_template.html
    >
    >
    > I don't know about Mozilla, but it's showing here in
    FireFox, which
    > uses the same engine.
    >
    > BTW: Result: Failed validation, 24 errors
    >
    >
    Hi, thanks for this information about Firefox. Hope someone
    else may
    have an answer for Mozilla.
    Concerning the validation errors. I know about the million of
    validation errors, we are upgrading a site from doc type
    'transitional'
    to doc type 'strict'. We have the site on a test server, put
    the
    validation icon first, let it point out the errors, then fix
    them one by
    one. When they have been fixed the site is published. (i.e.
    we are not
    claiming the site is valid when it isn't).
    If somebody else can reproduce the problem in Mozilla I
    should be most
    grateful.
    btw, I am Adrian Stock (=Adrian.Stock22), do not know why I
    am showing
    on the screen as 'domain unknown'.
    Ah, perhaps I did not log in properly.
    Adrian

  • Airport card 802.11b sees other networks but NOT my network!

    Hi. Having a very strange tech issue today...
    I have a 1ghz ti-book that no longer wants to connect or even SEE my home network after waking up from sleep. Up until today there has never been an issue. My home network is distributed via a Netgear 802.11b and g wireless router. Again, I have never ever had any issue whatsoever connecting to my network. WEP is enabled. There are also 6 other computers all connecting to the same network via wireless too. No problems.
    The crazy thing is I know the card is still functioning properly because I can still see all the other available networks around in my area. Even when I place the ti-book RIGHT NEXT to the antenna on the netgear router, it refuses to acknowledge that it is there. Meanwhile, it is showing all of my neighbors networks just fine!
    The only variable in this equation is that the hinge of the display is damaged, such that it won't stay open "by itself". The display normally has to be propped up against something. The machine works fine otherwise, no issues. The weak bezel breaking is an issue that many ti-book owners faced and it has been broken for a LONG time with no performance issues at all. The only thing I can think of is that maybe the wire to the antenna for the Airport card goes up the side of the display and somehow the wire is damaged or frayed. I don't know if this is how the ti-book was designed....does anyone know? Specifically, if the wire for the airport card runs along inside the case of the display on the 15 inch 1ghz ti-book?
    If it does not...and it seems like it is not hardware damage to the cable because how else could I still be getting other networks but not my own...then I am stumped as to how to trick my machine into recognizing the network again. I have done the basic things such as booting into single user mode and rebuilding my index, logging in as root and other users to see if the preferences were corrupt, and even installing a bunch of wifi wardriving apps to force recognition of my network and still nothing!
    Again the machine is right next to the access point, so what is causing it to no longer "see" it? I also updated the firmware in the router and checked configurations but no changes have been made and all the other machines work fine. Also it has NEVER done this before so I don't know how to troubleshoot it!
    *What would cause an airport card to reject the signal that it is configured to connect to? How should I go about getting it to see the network again...without reconfiguring the network which would mean having to update all the other machines, etc.* I have macstumbler and istumble running and they see PLENTY of networks except for the closest one. It is so bizarre. It was working when I went to bed and now today, no network. I have rebooted numerous times, etc.
    please help!! i need some ideas!!!
    thanks!

    a somewhat in depth search across the interwebs has lead me to the conclusion that this problem is also affecting Leopard users as well. (I am on old hardware and running the latest Tiger) To be honest, I can not remember if there was an Apple update right before this problem started to happen. However, it seems real enough and many users out there are having problems re-connecting to their home/work networks after waking from sleep.
    just to clarify:
    Using a ti-book with normal airport card installed (b not g)
    Connected to a Netgear wireless router (configured to manage both b and g traffic)
    WEP 64bit encryption key is being used for network
    No problems whatsoever until a few days ago
    what works:
    unplugging the power to the Netgear router (cycling power)
    what doesn't work:
    waking from sleep
    restarting
    manually entering network name and password
    using 3rd party apps to find network
    resetting/deleting Network location preferences and creating new one
    deleting AppleAirPort2.kext from /System/Library/Extensions/
    using either Diagnostic or Assistant mode to reconnect from scratch
    it should NOT be this difficult to solve a networking issue. what is going on here?

  • Office365- I created shared mailboxes for a user- they show on web but not on Outlook2013

    I created shared mailboxes for a user- they show on web but not on Outlook2013-
    If the user logs on to office365 web - I can see the 3 shared folders- but if when she opens Outlook she is not able to see them-
    Do they - should they be manually added ? How ?
    Thanks !!

    Hi,
    Thanks for your question.
    Not sure what exactly you mean by "created shared mailboxes for a user", by default, Outlook automatically loads all mailboxes to which the user has "Full Access" permission. So please first check if you have granted the right permissions
    for that mailbox to the user.
    When I say "By default", I mean you didn't disable the Outlook Auto-Mapping service. If you did, then the shared mailbox will not be automatically added to the user's Outlook profile. So please have a check on this:
    https://support.microsoft.com/kb/2646504
    Also, please note if the shared mailbox was just created, or the user was just added as a member of that shared mailbox, you probably will need to wait for a few hours for the shared mailbox to appear in the user's Outlook folder.
    Regards,
    Ethan Hua
    Forum Support
    Come back and mark the replies as answers if they help and unmark them if they provide no help.
    If you have any feedback on our support, please click
    here

  • WIFI stopped working after I woke the computer up, now says connected to the network but not the internet, all other coputers and devices connected still with no problems, have pinged IP address from router and got the message "4 packets sent none receive

    Hi,
    WIFI stopped working after I woke the computer up, now says connected to the network but not the internet, all other coputers and devices connected still with no problems, have pinged IP address from router and got the message "4 packets sent none received"... Help
    I have tried network diagnostics which doesnt help... The only other ting is, when I woke the computer up it said tat another device was using my IP... My wife had plugged her phone into the computer to charge etc but even when i turn wifi off on the phone there is no change... also in settings on the phone the IP address is different...

    The answer to your question is - neither!
    Your PC should to configured to obtain an IP address automatically, and to obtain DNS server IP addresses automatically, from the Airport Express. This is the way Windows (and Macs for that matter) are configued by default, and that is the way most people have their computers set up. If you manually configured your PC's IP address to be the same as your wife's Mac, it certainly explains why your PC is not able to access the internet.

  • Junk folder shows 1 message but unable to view or delete it.

    I'm using Apple Mail, OS 10.4.3. My Junk Mail folder shows one message, but when I click on the folder, it reports zero messages and nothing is visable. When I erase the messages in my Junk Mail folder, the folder still indicates one message.
    I tried resetting my preferences, but the problem persists.
    Anyone have any ideas?
    Thank you.

    Hello Michael.
    If for a POP type account, using the Finder go to Home > Library > Mail > this account named folder (named by the user name and incoming mail server for the account).
    Within a POP type account named folder should be mailbox folders with an .mbox extension.
    Confirm there is a Junk.mbox named folder and not a Junk named folder.
    If shown as a Junk named folder, quit Mail first and change the name of the Junk folder to Junk.mbox or add the .mbox extension.
    Launch Mail and this should resolve the problem.

  • How can I sync iPhone 3GS with my Windows 7 PC, when iTunes does not appear on monitor screen when I plug the iPhone into the computer?

    How can I ync iPhone 3Gs with my Windows 7 PC, when iTunes does not launch when I connect the iPhone to my computer? Note: My computer crashed and I am reinstalling everything.

    Syncing to a new iTunes library or computer will erase your phone. Only if you back up your phone manually before syncing, you can restore your device from that backup again. A manual backup does not include the sync process.
    Do this:
    Disable autosync in iTunes, connect your phone to your new computer and right click on it in the device list and choose backup. iTunes will backup your device without syncing.
    Transfer your purchases the same way, choosing "transfer purchases" this time.
    When you connect your phone for the first time, all media content will be erased. But you can restore your settings and app data from your manual backup afterwards.
    Don't forget to set up at least one contact and event on your new computer to be able to merge calendars and contacts when you sync the iPhone for the first time.
    Music is one way only, from the computer to your device, unless you bought the songs in iTunes and transferred your purchases.
    There is 3rd party software out there, but not supported by Apple, see this thread: http://discussions.apple.com/thread.jspa?threadID=2013615&tstart=0
    About backups and what's saved:iTunes: About iOS backups
    How to back up and restore:http://support.apple.com/kb/HT1414
    How to download apps for free again:http://support.apple.com/kb/HT2519
    Saving other data is also described here. How to back up your data and set up as a new device
    You can also back up iTunes and restore it on your new computer How to back up your media in iTunes , but the iPhone will be erased anyway during the first sync.

  • While trying to access  i phone through pc (windows 7 ) showing error 'you do not have permission to access this device '

    while trying to access  i phone through pc (windows 7 ) showing error 'you do not have permission to access this device '
    And while trying  to unlock screen after lock , slide not working 'slide to unlock'

    Hello there, charialji.
    The following Knowledge Base article offers some great steps for troubleshooting your issue:
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/ts3281
    Resolution
    If a single application is not responding or stops responding when it opens, you can force it to close.
    If the device is unresponsive or if certain controls aren't working as expected, restart your device.
    If the device remains unresponsive or does not turn on (or power on), reset your device.
    If there is no video or if the screen remains black, verify that the device has enough charge to turn on:
    If you are using an iPad, ensure that it's connected to the USB Power Adapter supplied with the device.
    Let it charge for at least twenty minutes, then see if it starts normally.
    If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
    If the screen displays a red battery icon, continue charging the device until the battery is fully charged. Learn more about charging iPhone and iPod touch, or iPad.
    If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
    Connect the device to your computer and open iTunes.
    If the device appears in iTunes, select and click Restore on the Summary pane. Learn more aboutrestoring iOS software.
    If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
    If the above steps do not resolve the issue, contact Apple.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Problem viewing streaming video in some wifi networks, but not others

    When I am at work (university), I can not view YouTube videos or video streaming from news sites such as cnn mobile on my ipod touch 2g.
    <m.cnn.com/videos.jsp?ckey-cnn)06#__1_>
    When I called Apple support, they had me reset-restore. I still had the problem. I went to the Apple store Genius bar and the problem no longer existed, the videaos downloaded and played from both sites!
    But at my diner and at work, I get the message, "This movie could not be played" in a popup box with an OK button. The same message appears if I use the YouTube application. I click on any video, and the same popup appears. In Cnn the popup is preceded by a shaded capital Q that looks like the blue Quicktime Q; in Youtube the pupup is preceded by a YouTube icon in gray with the "Tube" surrounded by the rounded rectangle, their icoon...
    At the Apple store the popup never appeared, and the videos downloaded and played.
    I have no trouble playing movies I have downloaded from iTunes.
    I did not have this problem when I initially got my iPod Touch, and I think it appeared after one of the last two system upgrades, but I am not sure.
    I am curious that it the problem happens at two places, my diner and at work.
    The speed of my wireless work network, as judged by the ipod app speed test is 9915 kbps download and 6971 kbps upload, so plenty fast.
    The first time I noticed this issue was with the application "At Bat Lite" which also won't play video highlights at work.
    I do not have WiFi at home
    Any thoughts about what would cause this lack of functionality apparantly only at some networks but not others?
    Oh, one more piece of data: at work a Macbook will play YouTube both on ethernet and using wifi...
    Thanks for any thoughts or suggestions,
    Paul

    It seems I have two networks available at work, one is behind our firewall, and I login to it. This is the network that I can't view streaming video. There is also a "Guest" network that I don't need to login to. This one works with the YouTube and the news site videos.
    Thus, I conclude there is a setting that WiFi network administrators can invoke that specifically can block streaming video on some protocols (whatever the ipod touch uses) and not others (whatever the Macbook uses). But the same router hardware supplying the Guest network does not block these protocols. Presumably this has to do with security on one side of the firewall(?)
    Anyway, apparently outside of the WiFi controls available in the ipod touch settings.
    Weird...
    Paul

  • HT1595 apple tv will connect to network but not internet

    apple tv will connect to network but not internet

    I have unplugged the apple TV but it still says noat connected. However, it has accessed some movies but when I try to purchase or download from say netflix, it cannot.

  • I have unlocked iphone 5.i tried to use it with tmobile.it shows full network but fails to activate and shows sim invalid.how to make it work?

    i have unlocked iphone 5.i tried to use it with tmobile.it shows full network but fails to activate and shows sim invalid.how to make it work?

    Who was your original carrier; did you call them to ask them to unlock your phone, and are you aware of what their unlock policy is (THey may only unlock for international sims and not US sims

  • My PC is connected to my airport by Ethernet. I can connect to the network, but not the internet. My wireless devices can access the internet

    My PC is connected to AirPort Extreme by ethernet, I can access the network, but not the internet. The wireless devices on the extreme can access the internet

    Hey DM,
    Is the Wireless(WL) router signal coming through the wired-router?
    My ISP requires that my Wireless Router is identified from their end. I use AirPort Express, so they need its MAC address from the router. Without that, my network will show up, but my ISP doesn't recognize it and won't allow it to route he internet. I don't know your exact situation though.
    Can other wireless computers access the internet? If they can through the WL router, then it might be the MacBook. If they can't, then you might want to contact your ISP and ask if they can see your wireless router?
    Let us know.
    Adam

  • Can Management Studio connect to a server that is on the same network but not on the same domain?

    Should management studio be able to connect to an instance of an sql server that is on the same network but not on the same domain?  I am trying to have it do so but am unsuccessful, so to continue to troubleshoot what the issue might be I need to know
    whether I am embarking on an exercise in futility.

    Hello,
    That's your issue!
    Since you're attempting to use Windows Authentication you'll need to start the SSMS process under the domain credentials of the domain account that has access to that SQL Server. Otherwise windows is going to send you local user token which is going to quickly
    be rejected as your local computer user account is not the correct domain account.
    You can do this by either using shift+right-click run as different user or from the command line using RunAs /user.
    In either case, if you want to use Windows Authentication you'll need to run the SSMS process as that domain user so that you can pass a valid security token.
    Edit:
    I read that backwards... If it's not on any domain (or member of a workgroup) you'll have a really hard time in using windows authentication as you're limited to LOCAL users on that machine. Thus you could really only use windows auth if you were logged
    in locally on that server. I'd either setup a SQL Login for this or join it to a domain.
    Sean Gallardy | Blog |
    Twitter

Maybe you are looking for