Windows found a problem with file. publisher: unkown publisher

fail's to install foxfire. keep stopping in mid installation due to verifcation issues
== This happened ==
Every time Firefox opened
== during the process of installing the program ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.0; Trident/4.0; SLCC1; .NET CLR 2.0.50727; Media Center PC 5.0; .NET CLR 3.0.04506; OfficeLiveConnector.1.3; OfficeLivePatch.0.0)

Make sure you clear your Windows TEMP data, then use the instructions at [[Installing Firefox on Windows]]

Similar Messages

Error while opening pdf in reader in windows 8:Can't open this file. There's a problem with file format

I have a problem with a pdf file which does not open with reader in windows 8 but it opens properly with adobe pdf reader. All other pdf can be opened in reader.But when i open a pdf(see this link for pdf for which i got error http://incometaxsoft.com/temp/Form.pdf)
it gives error as "Can't open this file. There's a problem with file format".
The same file opens properly in adobe pdf reader.You can check the pdf file which i have mentioned in the link above.But the reader which comes with windows 8 can open some other pdf in the same PC.What may be the error causing this??

This has turned out to be an enormous issue for me as I sell PDF files as ebooks. I have done a fair amount of investigating this for my system.
My files have to be compatible not just across readers but across operating systems.
To date, I have over 200 PDFs that have functioned flawlessly across Mac, PC (Windows 7 and below), Android, iPhone/iPad, Linux.
I personally test my PDFs using a variety of readers and PDF editors including
PDF XChange (my favorite)
Foxit (runner up for me and I recommend for most people)
Adobe (the bloated monster)
Nitro 9 (great for moving graphical elements around)
ABBYY
And the Nuance PDF Create toolsets
Those are off the top of my head. There are a bunch on Android that I test with too.
I am running the Windows 10 Pro Tech Preview and I have this same problem so I know it isn't fixed yet in any kind of pre-release way (-sigh-)
Here is what I've learned for my situation
The PDFs I created using NUANCE'S PDF CREATE PROFESSIONAL VERSION 8
all fail using the built-in Windows 8/10 PDF reader.
When I look at the PDF properties for these Nuance created files, the underlying engine used to write them is called "ImageToPDF". Using ABBYY it indicates their own engine as does everyone else that I've tried. It is easy for you to check to see
what created your PDF by doing a "Control D" (look at the document properties). Perhaps there's a common engine causing issues.
If I use the exact same source files to create a PDF using any of my other tools I have no issues. I checked the PDF versions made by the tools and they are all set to 1.5.
A customer mentioned being able to convert them in a way they worked by saving them without having to do any kind of extraction, but I have not been able to duplicate that. Perhaps he did a "print" which seems like it could work.
In summary, the workaround everyone is talking about, using an alternate reader, of course works. But not everyone wants to change.
The culprit I have found is my Nuance PDF Creation tools that are using the ImageToPDF engine.
I hope it gets FIXED as I really don't want to have to regenerate all of my PDF files.

When I open Firefox the following alert appears: "Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory." There is a solution in the forum but only for Windows based

When I open the application the following alert appears: "Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory." There is a solution on the support site but only for Windows-based Firefox, and I'm a Mac user. I have plenty of room on my hard disk.
== This happened ==
Every time Firefox opened
== Two days ago, for no apparent reason.

In Mac OS X v10.7, the $HOME/Library folder is a hidden folder.
Open Finder and use one of these:
* Go > Go To Folder (Shift-Command-G) and in the dialog type: ~/Library
* Open the "Go" menu and hold down the Option key to make the Library appear
You can also use this command in a Terminal window to remove the hidden flag.
* Mac HD > Applications > Utilities > Terminal
* chflags nohidden ~/Library

Problems with text in iWeb publishing much larger, or smaller than in iWeb (it is insane)!

More than a year ago I had a problem with my iWeb not publishing correctly: links to other websites would not open in a separate window as designed in iWeb. I got help from an AppleCare techie and after he did a lot of tests, he concluded I had a corrupted Domain file (which became apparent after I upgraded to OS Snow Leopard). I don't remember if I discussed with this techie another problem I had been having for as long as I had used iWeb, and that was "exploding" text: certain words, often italicized, would be huge, after publishing, relative to the surrounding text. Sometimes certain words, or sentences would be smaller than designed in iWeb. Through trial and error I would sort of solve these problems by enlarging text boxes, or making the offending word or phrase one text point smaller. Sometimes deleting the text box entirely, and starting over would work. And then there are the weird things that happen when my wife opens my website in Internet Explorer: things that make no sense and seem to be totally out of my control.
So, I've spent a long time rebuilding my website in this supposedly uncorrupted Domain file, and today I finally finished and published to my hard drive, checked it out, and the "exploding" text is there with a vengeance. So much so that I may just stick with my original ("corrupted") Domain file, the text problem on this new one seems even worse than the old one. Anyone had this problem? I meant to ask this question years ago, but got a bit lazy.
Another question is: I've heard Apple is going to discontinue iWeb. Despite my problems with the program, I rely on it. What are the options going to be for iWeb users?

Well you heard wrong didn't you!
Apple is discontinuing MobileMe, which is the hosting in favour of iCloud services which will not contain any hosting.
iWeb is an app and as far as we know you can still continue to use it - it will still work so carry on using it if you are happy with it.
If you want to look at other alternatives to iWeb, then others suggest RapidWeaver and Sandvox as being closer to iWeb - both are available via the Mac App store.
Also Freeway Express and Flux 3 are worth looking at - more design freedom and you are not restricted to templates as with RapidWeaver.

Document Creation error - "We're sorry. We can't open document name because we found a problem with its contents"

Morning Friends,
I have created a SharePoint 2010 "Site Workflow" that is designed to take information from a form and create a Word doc with the gathered information and store this Word doc in a document library.
I am using Sharepoint 2013 with Office 2013
I understand there are a lot of steps (19) outlined below and I can provide more information as needed but the bottom line is this, workflow successfully takes info from an initiation form, uses the info to create a Word doc. Places this Word doc in a library.
When attempting to open / edit doc, receive error
"We're sorry. We can't open <document name> because we found a problem with its contents"
Details - No error detail available.
Any info or advice would be greatly appreciated.
Very high level view of what I have done:
1 - Created content type called "Letters"
2 - Added site columns " First Name" and "Last Name"
3 - Created and saved to my desktop a very basic Word document (Letter.docx) that says "Hello, my name is XXXX XXXX"
4 - In the advanced settings of the "Letters" content type I uploaded this "Letter.docx" file as the new document template.
5 - Created a new document library called "Letters"
6 - In Library Settings - Advanced Settings, clicked "Yes" to enable the management of content types.
7 - Then I clicked "Add from existing content types" and added the "Letters" content type
8 - Back in the advanced settings of the "Letters" content type I selected "Edit Template" and replaced the first XXXX with the Quick Part "First Name" and the second XXXX with the Quick part "Last Name"
9 - Created a new 2010 Site workflow called "Create a Letter"
10 - To the workflow I added the action "Create List Item"
11 - Configured the action to create Content Type ID "Letters" in the document library "Letter"
12 - For the "Path and Name" I gave it a basic name of "Letter to"
13 - The next step was to create the Initiation Form Parameters and added to form entries "First Name" and "Last Name"
14 - I then linked the initiation form fields to the data source "Workflow Variables and Parameters" to their respective Field from Source parameters
15 - Went back to the "Path and Name" and modified the basic name of "Letter to" to include the first and last name parameters.
16 - Saved - published and ran the work flow.
17 - As expected, Initiation Form prompts for First and Last Name. ("John Doe") Then click "start
18 - Go to document library "Letters" and see a new Word document created titles "Letter to John Doe"
19 - Go to open / edit the Word document and receive the following error
thoughts? Any info or advice would be greatly appreciated.

See this MS support article for SP2010 workflows and generating Word docs:
https://support.microsoft.com/kb/2889634/en-us?wa=wsignin1.0
"This behavior is by design. The Create
List Item action in the SharePoint
2010 Workflow platform can't convert Word content type file templates to the correct .docx format."
I've had success in using SP 2013, Word 2013 (saving a .docx as the template instead of .dotx for the document library content type), and an SP 2010 workflow using SP Designer 2013.

Problems with reports and XML-publisher - No XML

Hi!
I'm having a problem with Apps and XML-publisher. I made a report file, which queries some views. When executing in reports, I get all the data I expect.
Now, when I upload the reportfile to Apps and let it generate XML, my xml-file is empty (well, almost empty)
<?xml version="1.0" ?>

<T03501684>
<LIST_G_PERSOON>
<LIST_G_PERSOON />
</T03501684>
Anyone who can shed any light upon this problem?

OK, finally solved the problem... A good night's sleep always helps ;).
After just trying each queried table one after an other, I found the problem:
The difference between Oracle Apps (Dutch locale) and the reports builder (English) is the language... And our functional people have changed some names, but the Dutch ones, leaving the english names in place and one of the tables I query has language specific data, which is also appears in a where clause.

Problem with file permissions

Hello all,
I am making a simple HttpServlet, which takes input
from html page and saves in to a file, but I'm having a
bit of a problem with file permissions.
I'm getting the following exception
java.security.AccessControlException: access denied (java.io.FilePermission ./data/result read)
     java.security.AccessControlContext.checkPermission(AccessControlContext.java:264)
     java.security.AccessController.checkPermission(AccessController.java:427)
     java.lang.SecurityManager.checkPermission(SecurityManager.java:532)
     java.lang.SecurityManager.checkRead(SecurityManager.java:871)
     java.io.File.exists(File.java:700)
     SyksyHTTPServlet.doPost(SyksyHTTPServlet.java:31)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:709)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
     sun.reflect.GeneratedMethodAccessor52.invoke(Unknown Source)
     sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     java.lang.reflect.Method.invoke(Method.java:585)
     org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:243)
     java.security.AccessController.doPrivileged(Native Method)
     javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
     org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:275)
     org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:161)The exception seems to occur when I'm trying to check whether the file already
exists or not.
The data directory has all permissions (read, write and execute) set for all users,
and I have made an empty file called result inside the data directory for testing.
This file has read and write permissions enabled for all users.
Here's my code
import javax.servlet.*;
import javax.servlet.http.*;
import java.io.*;
import java.util.Enumeration;
import java.util.List;
import java.util.ArrayList;
public class SyksyHTTPServlet extends HttpServlet
     public void doPost(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException
          int totalCount = 0;
          List list;
          String song = request.getParameter("song");
          PrintWriter out = response.getWriter();
          File file = new File("./data/result");
          if(file.exists()) // this is line 31, which seems to cause the exception
               list = readFile(file);
          else
               file.createNewFile();
               list = new ArrayList();
          list.add(song);
          writeFile(file, list);
          for(int i = 0 ; i < list.size() ; i++)
               out.println(list.get(i));
     public void doGet(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException
          doPost(request, response);
     private List readFile(File file)
          List list = null;
          try
               FileInputStream fis = new FileInputStream(file);
               ObjectInputStream ois = new ObjectInputStream(fis);
               list = (ArrayList)ois.readObject();
               ois.close();
          catch(Exception e)
               e.printStackTrace();
          return list;
     private void writeFile(File file, List list)
          try
               FileOutputStream fos = new FileOutputStream(file);
               ObjectOutputStream oos = new ObjectOutputStream(fos);
               oos.writeObject(list);
               oos.flush();
               oos.close();
          catch(Exception e)
               e.printStackTrace();
}I'm using Tomcat 5.5 on Ubuntu Linux, if that has anything to do with this.
I'll appreciate all help.
kari-matti

Hello again.
I'm still having problems with this. I made
a simple servlet that reads from and writes
to text file. The reading part work fine on my
computer, but the writing doesn't, not even
an exception is thrown if the file exists that
I'm trying to write to. If I try to create a new
file I'll get an exception about file permissions.
I also asked a friend of mine to try this same
servlet on his windows computer and it works
as it should.
Here's the code
import javax.servlet.*;
import javax.servlet.http.*;
import java.io.*;
public class ReadServlet extends HttpServlet
     public void doPost(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException
          String s = "";
          PrintWriter out = response.getWriter();
          String docroot = getServletContext().getRealPath( "/" );
          out.println("docroot: "+docroot);
          File file = new File(docroot+"test.txt");
          if(file.exists())
               s = readFile(file);
               out.println(s);
          else
               out.println("file not found");
               //file.createNewFile();                    // causes exception
               //out.println("new file created.");
          writeFile(file, "written by servlet");
          out.println("Now look in the file "+file.getPath());
          out.println("and see if it contains text 'written by servlet'");
     public void doGet(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException
          doPost(request, response);
     private String readFile(File file)
          FileInputStream fis = null;
          BufferedInputStream bis = null;
          DataInputStream dis = null;
          String s = "";
          try
               fis = new FileInputStream(file);
               bis = new BufferedInputStream(fis);
               dis = new DataInputStream(bis);
               s = dis.readLine();
               fis.close();
               bis.close();
               dis.close();
          catch(Exception e)
               e.printStackTrace();
          return s;
     private void writeFile(File file, String s)
          FileOutputStream fos = null;
          BufferedOutputStream bos = null;
          DataOutputStream dos = null;
          try
               fos = new FileOutputStream(file);
               bos = new BufferedOutputStream(fos);
               dos = new DataOutputStream(bos);
               dos.writeChars(s);
               fos.flush();
               bos.flush();
               dos.flush();
               fos.close();
               bos.close();
               dos.close();
          catch(Exception e)
               e.printStackTrace();
}And if someone wants to test this servlet I can
give a war package.
Any advices?
kari-matti

Mat****a UJ-8315: Error message - windows found a problem

I'm trying to copy a film to a dvd/cd and the windows always display the message: windows found a problem.....what might be wrong ?

Hi
Usually its not possible to copy the original DVD movies with the simply burning application because of the copy protection.
Did you get also this same error message if you will copy simple files on the CD or DVD? If not so I assume the medias are copy protected and therefore its not possible to burn the medias.
The second possibility is that you use not compatible medias. Usually in the user manual of your notebook you will find a list of tested and supported medias which should work properly.

I suddenly have this error message on FireFoxthis message pops up: "Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory. Please check that this directory has no re

I suddenly encounter this error message from Fire Fox.
Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory. Please check that this directory has no read/write restrictions and your hard disk is not full or close to full. It is recommended that you exit the application and fix the problem. If you continue to use this session, you might see incorrect application behaviour when accessing security features.
I uninstalled the browser and download a new version but it does not resolve the issue.
I know my hard disc has ample space. I do NOT know where to find the Profile directory to fix the read restriction box.
== This happened ==
Every time Firefox opened
== After something about security add-on of Norton pop up by itself. ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; MSN Optimized;US)

This link shows things to check - https://support.mozilla.com/kb/Could+not+initialize+the+browser+security+component

Unable to download from AppStore, updates,etc.Messages 'the installer is damaged' to 'there might be a problem with file ownership and permissions.' I am the owner and only user of a new MBP. What could be going on?

Is anyone having the same type of problems I'm having with Lion. I have a new MacBook Pro, received 7 weeks ago, preinstalled with Leopard 10.6.7. I didn't migrate anything from my old iMac, wanted a clean install from the Apple Store. While there, I asked for the upgrade to Lion 10.7, however their system was down.
I installed it myself, wirelessly about a week later, and Apple emailed me a receipt. Now, I've had to call support directly last week when I lost Mail, Address Book, was unable to open Preview or iTunes, among other problems. Seemed fixed after a session that baffled even the store tech. Now I am unable to download or install the recent Mac updates for Lion, from the App Store, could not install Adobe Reader, etc. Messages range from 'A network error has occured - Check your Internet connection and try again' to 'The Installer is damaged and cannot open the package. There may be a problem with file ownership or permissions.' All fail and I'll probably have to call Apple again. I am frustrated beyond words. Logs 'Install's runner tool is not properly configured as a setuid tool', domain errors, 'attempt to write a readonly database, and on and on. I have barely done a thing on this computer except search online for help with these problems. Safari gives me a 'You are not connected to the internet' too often. Diagnostics disagrees. I do see wi-fi problems in the forum. Disk and permissions were fine at the beginning of the earlier problems, checked first by support tech. I'm not sure if support tech even knew. I was just happy they were fixed. Anyone have these download and/or install problems after a 'clean bill of health' so to speak, only a week ago?

Let's try the following user tip with that one:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

Problem with File Based replication in Weblogic Express 10

Hi,
          We have Web application (exploded war) file deployed on Weblogic Express 10, to a Cluster of three Managed Servers (all three on different physical machines).
          We are using File based session persistance in weblogic.xml
          We have a shared location for all the three servers where we will be sharing the Session data.
          When we start the application, its works fine and is very fast, but after sometime the application slows down.
          Troubleshooting the Issue we found that its a problem with file based replication. By using File based replication every user session is stored in form of directory inside shared directory. So after sometime thousands of directories are created inside the shared directory where the session information is stored. So when we access the application, its waiting for lot of time with Message Session Monitor .... (this is because its browsing through the shared session storage directory for lot of time for session information as it has lot of directories) and finally after a long time like 10 mins we get the Application Home Page.
          When we clean up all the saved sessions inside shared directory, the application works fine, But we will see the same sometime later may be after 3 or 4 hours when the shared session directory has lot of session information stored in it.
          Is there a way to clean up the saved session information on file system as soon as that user session is closed by using file based replication.
          We cannot used Inmemory replication as our Appl doesnt support it.
          Please advice as it is a major show stopper in our Production Mirror env.
          Weblogic Consultant

It is possible to reduce number of live session by configuring very low timeout-secs weblogic.xml. Default is 60 minutes.
          More details are here..
          http://e-docs.bea.com/wls/docs100/webapp/weblogic_xml.html#wp1071982
          Jayesh
          Yagna Sys

Problem with FIle Adapter

Hi
We r facing typical problem with file adapter.
Lets say there are 30 files to be processed by placing an copy in arichive folder by file adapter based on pooling
parameters.
All the 30 files are picked up and we can see the copies in archive folder.
But when we go to RWB and check the audit log,
there we could see only 25 files , the 5 files are missing.
no trace found therre about the 5 files.
This is happening only some times and not to all the files placed in the FTP. Later when the same file is placed back from the Archive folder to the Source folder, the file is being picked and processed succesfully.
unfortunately this is happening on Production server
Any pointers which could trouble shoot this issue.
Regards
shekar chandra

Hi,
Couple of thing which you can try....
1. Use EOIO QoS and check if you still face the issue.
Is some program or application writing files to the directory? If yes I would recommend the use of a temporary name to write the files and then rename them.
Sometimes when an external application connects via FTP and transfers the files...
The file could be picked up by the adapter poll even before the transfer of data is done.
Which is why you will find that the file is archived but there is no xml message created for the same in the Integration engine.
Try increasing the poll interval. This helps sometimes.
Regards,
Sidharth

Problem with file content conversion in receiver file adapter

Hi All
I have a problem with file content conversion in receiver file adapter.
This is my recordset structure: Header_Record,1,Claim_Record,*,Check_Rec,1
These are the content conversion parameters:
Header_Record.fieldSeparator = ,
Header_Record.endSeparator = 'nl'
Claim_Record.fieldSeparator = ,
Claim_Record.endSeparator = 'nl'
Check_Rec.fieldSeparator = ,
Check_Rec.endSeparator = 'nl'
In SXMB_MONI, i can see that the data is correctly extracted from proxy, and correctly mapped to receiver message, and i see a checkered flag (success).
But, Adapter status is RED with the following error message:
Conversion initialization failed: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found: Parameter '1.fieldFixedLengths' or '1.fieldSeparator' is missing
In communication channel monitoring, i get the following error message:
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Channel has not been correctly initialized and cannot process messages
What is going wrong here? Can anyone please tell me?
Thanks
Chandra

Posted in Incorrect forum.
Posted again in Process Integration forum

Problem with file path in linux

hi,
i have problem with file path accessing in linux. my java class is accessing a abc.cvs file and and getting all data. it is working fine in windows xp. but i run this same file in linux it does not access the abc.cvs file and does not get any data.
my project structure
Search
abc.cvs
search.SearchMain
i am sccessing this cvs file in this SearchMain class by this way file name = "abc.cvs"
It is working fine with window but problem with linux.
when i place this abc.cvs in a folder as "./data/abc.cvs" also working fine with windows but not in linux.
I am new for linux.
Please give me solution.
Thanks in advance
Ravi

forgot to tell,
then you need to export that path
export $CLASSPATH
code}

NT security problems with file I/O

I have 2 problems with file I/O. When I read from a file I use the getAbsolutePath() method that is part of the File class to find what directory the files are currenlty. The problem is that the returned path says that the file is on the desktop no matter what directory the file really is in. The second problem is that I am unable to save files anywhere but the desktop. I must run the class files from the desktop too to get it to work.
I am using NT 4.0 for development. I'm guessing that these problems might be NT security related. Could someone help me?
Code below:
import java.awt.*;
import java.applet.*;
import java.net.*;
import java.io.File;
import java.awt.event.*;
//import java.security.*;
//import sun.security.*;
//import java.awt.Window;
//import com.ms.security.*;
public class Edit extends Applet implements ActionListener, ItemListener
String Gselect;
reader readit;
int mhz, khz;
TextField textField1;
String freq = "000.000";
String data;
Choice freqC;
Button ActivateB, SaveB, /*CancelB, HelpB,*/ DeleteB;
Checkbox SetC;
int NotUsedReply[] = new int[200];
int HwListReply[] = new int[200];
public void init()
readit = new reader();
String myFile="satellite.st1";
// myFile = myFile.concat(Gselect);
File satellite = new File(myFile);
textField1 = new TextField();
textField1.setText( "(void) " );
add( textField1 );
SetC = new Checkbox("TRAP-RX");
add(SetC);
SetC.addItemListener(this);
freqC = new Choice();
freqC.setSize(20,50);
freqC.add("000.000");
add(freqC);
freqC.addItemListener(this);
ActivateB = new Button("Activate");
add(ActivateB);
ActivateB.addActionListener(this);
SaveB = new Button("Save");
add(SaveB);
SaveB.addActionListener(this);
DeleteB = new Button("Delete");
add(DeleteB);
DeleteB.addActionListener(this);
     /*CancelB = new Button("Cancel");
add(CancelB);
CancelB.addActionListener(this);
     HelpB = new Button("Help");
add(HelpB);
HelpB.addActionListener(this);*/
//textField1.setText( data );
for(int a = 1; a < 9; a++)
data = readit.getData(satellite.getAbsolutePath(), a);//("E:\\forte4j\\system\\Projects\\Zebra\\satellite.st1", a);
freqC.addItem(data);
textField1.setText(satellite.getAbsolutePath() );
public void paint(Graphics g)
//g.drawString("Radio Setup Files",20, 20);
//g.drawString(getParameter("wse"),20, 20);
public void actionPerformed(ActionEvent event)
if(event.getSource() == ActivateB)
activator();
if(event.getSource() == SaveB)
/*if(event.getSource() == CancelB)
stop();
if(event.getSource() == HelpB)
if(event.getSource() == DeleteB)
public void itemStateChanged(ItemEvent e)
if(e.getItemSelectable() == SetC)
textField1.setText("Check box 1 clicked!");
if(e.getItemSelectable() == freqC)
freq = ((Choice)e.getItemSelectable()).getSelectedItem();
public void activator()
makeMHZ();
makeKHZ();
if(mhz > 254)
int StartLink[]={0x0c,0x01,0x07,0x00,0x00,0x00,0x00,0x00,0x00};          //New Link Proc Start
int TrapConfig[]={0x25,0x80,0x00,0x00,0x00,0xb7,0x00,0x0c,0x0b,          //TRAP Configuration
0x00,0x00,0x00,0xff,0xa0,0xff,0x0d,0xff,0xe8,
0xff,0x0d,0xff,0x00,0xff,0x15,0xff,0xb0,0xff,
0xff,0xff,0x94,0x0a,0x01,0x06,0x1a,0x00,0x0d,
0x2d,0x21};
TrapConfig[11]=(mhz-255);
TrapConfig[12]=(khz/5);
int SetUserOutput[]={0x41,0x42,0x49,0x54,0x52,0x41,0x50,0x20,0x34, //Sets User Output Format
0x35,0x34,0x35,0x30,0x30,0x2e,0x30,0x4e,0x30,
0x38,0x32,0x34,0x35,0x30,0x30,0x2e,0x30,0x57,
0x30,0x31,0x30,0x30,0x2e,0x30,0x30,0x4b,0x4d,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00};
sendget CmdFunc;
CmdFunc=new sendget();
try
//PolicyEngine.assertPermission(PermissionID.SYSTEM);
Socket h = new Socket("192.9.200.155",9000);
Socket s = new Socket("192.9.200.155",9001);
Socket t = new Socket("192.9.200.155",9002);
int j;
CmdFunc.SendCmd(h,0,0x01,null);
CmdFunc.GetCmd(h,HwListReply);
CmdFunc.SendCmd(s,9,0x1e,StartLink); //New Link Proc Start
CmdFunc.GetCmd(s,NotUsedReply);
CmdFunc.SendCmd(s,37,0x00,TrapConfig); //TRAP Configuration
CmdFunc.GetCmd(s,NotUsedReply);
CmdFunc.SendCmd(s,155,0x03,SetUserOutput);//Sets User Output Format
CmdFunc.GetCmd(s,NotUsedReply);
catch(Exception e){}
else
textField1.setText( "000.000 is the null choice. Try another." );
public void receiveText1( String select )
Gselect=select;
public void makeMHZ()
String y = freqC.getSelectedItem();
y = y.substring(0,3);
mhz = Integer.parseInt(y);
//textField1.setText( y );
public void makeKHZ()
String y = freqC.getSelectedItem();
y = y.substring(4,7);
khz = Integer.parseInt(y);
//textField1.setText( y );
import java.awt.*;
import java.applet.*;
import java.io.RandomAccessFile;
import java.io.FileNotFoundException;
import java.io.IOException;
import java.io.LineNumberReader;
import java.awt.event.*;
import com.ms.security.*;
import netscape.security.*;
import netscape.util.*;
public class saver extends Applet implements ActionListener
String nameS = "Data.txt";
String dataS = "Default Data";
Button saveB;
public void init()
saveB = new Button("SaveFile");
add(saveB);
saveB.addActionListener(this);
public void actionPerformed(ActionEvent event)
if(event.getSource() == saveB)
RandomAccessFile RAF;
byte array0[] = dataS.getBytes();
try
if (Class.forName("com.ms.security.PolicyEngine") != null)
PolicyEngine.assertPermission(PermissionID.SYSTEM);
if(Class.forName("netscape.security.PrivilegeManager") != null)
netscape.security.PrivilegeManager.enablePrivilege("UniversalFileWrite");
catch (Throwable cnfe)
try
RAF = new RandomAccessFile(nameS, "rw");
// RAF.writeUTF(dataS);
RAF.write(dataS.getBytes());
RAF.close();
catch(Exception e)
public void receiveND(String name, String data)
if(name != null)
nameS = name;
dataS=data;
import java.io.RandomAccessFile;
import java.io.FileNotFoundException;
import java.io.IOException;
import java.io.LineNumberReader;
//import java.security.*;
import com.ms.security.*;
import netscape.security.*;
import netscape.util.*;
public class reader
//Signature sig;
public String getData(String filename, int pass)
//String nameS = "Data.txt";
String dataS = "Default Data Sucks";
String comma = ",";
int get = pass, count=0, top=0, bottom=0;
char[] work;
try
if (Class.forName("com.ms.security.PolicyEngine") != null)
PolicyEngine.assertPermission(PermissionID.SYSTEM);
if(Class.forName("netscape.security.PrivilegeManager") != null)
netscape.security.PrivilegeManager.enablePrivilege("UniversalFileRead");
catch (Throwable cnfe)
try
//sig.sign();
//nameS = filename;
RandomAccessFile RAF = new RandomAccessFile(filename, "r");
// dataS = RAF.readUTF();
dataS = RAF.readLine();
RAF.close();
catch(Exception e)
return e.toString();
work = dataS.toCharArray();
for(int i = 0; i < dataS.length(); i++)
if( work[i] == ',' )
count++;
if(get == count)
bottom = i + 1;
if( (work[i] == ',') && (count > get) && (top == 0) )
top = i;
dataS = dataS.substring(bottom,top);
return dataS;
}

import java.awt.*;
import java.applet.*;
import java.net.*;
import java.io.File;
import java.awt.event.*;
//import java.security.*;
//import sun.security.*;
//import java.awt.Window;
//import com.ms.security.*;
public class Edit extends Applet implements ActionListener, ItemListener
String Gselect;
reader readit;
int mhz, khz;
TextField textField1;
String freq = "000.000";
String data;
Choice freqC;
Button ActivateB, SaveB, /*CancelB, HelpB,*/ DeleteB;
Checkbox SetC;
int NotUsedReply[] = new int[200];
int HwListReply[] = new int[200];
public void init()
readit = new reader();
String myFile="satellite.st1";
// myFile = myFile.concat(Gselect);
File satellite = new File(myFile);
textField1 = new TextField();
textField1.setText( "(void) " );
add( textField1 );
SetC = new Checkbox("TRAP-RX");
add(SetC);
SetC.addItemListener(this);
freqC = new Choice();
freqC.setSize(20,50);
freqC.add("000.000");
add(freqC);
freqC.addItemListener(this);
ActivateB = new Button("Activate");
add(ActivateB);
ActivateB.addActionListener(this);
SaveB = new Button("Save");
add(SaveB);
SaveB.addActionListener(this);
DeleteB = new Button("Delete");
add(DeleteB);
DeleteB.addActionListener(this);
/*CancelB = new Button("Cancel");
add(CancelB);
CancelB.addActionListener(this);
HelpB = new Button("Help");
add(HelpB);
HelpB.addActionListener(this);*/
//textField1.setText( data );
for(int a = 1; a < 9; a++)
data = readit.getData(satellite.getAbsolutePath(), a);//("E:\\forte4j\\system\\Projects\\Zebra\\satellite.st1", a);
freqC.addItem(data);
textField1.setText(satellite.getAbsolutePath() );
public void paint(Graphics g)
//g.drawString("Radio Setup Files",20, 20);
//g.drawString(getParameter("wse"),20, 20);
public void actionPerformed(ActionEvent event)
if(event.getSource() == ActivateB)
activator();
if(event.getSource() == SaveB)
/*if(event.getSource() == CancelB)
stop();
if(event.getSource() == HelpB)
if(event.getSource() == DeleteB)
public void itemStateChanged(ItemEvent e)
if(e.getItemSelectable() == SetC)
textField1.setText("Check box 1 clicked!");
if(e.getItemSelectable() == freqC)
freq = ((Choice)e.getItemSelectable()).getSelectedItem();
public void activator()
makeMHZ();
makeKHZ();
if(mhz > 254)
int StartLink[]={0x0c,0x01,0x07,0x00,0x00,0x00,0x00,0x00,0x00}; //New Link Proc Start
int TrapConfig[]={0x25,0x80,0x00,0x00,0x00,0xb7,0x00,0x0c,0x0b, //TRAP Configuration
0x00,0x00,0x00,0xff,0xa0,0xff,0x0d,0xff,0xe8,
0xff,0x0d,0xff,0x00,0xff,0x15,0xff,0xb0,0xff,
0xff,0xff,0x94,0x0a,0x01,0x06,0x1a,0x00,0x0d,
0x2d,0x21};
TrapConfig[11]=(mhz-255);
TrapConfig[12]=(khz/5);
int SetUserOutput[]={0x41,0x42,0x49,0x54,0x52,0x41,0x50,0x20,0x34, //Sets User Output Format
0x35,0x34,0x35,0x30,0x30,0x2e,0x30,0x4e,0x30,
0x38,0x32,0x34,0x35,0x30,0x30,0x2e,0x30,0x57,
0x30,0x31,0x30,0x30,0x2e,0x30,0x30,0x4b,0x4d,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00};
sendget CmdFunc;
CmdFunc=new sendget();
try
//PolicyEngine.assertPermission(PermissionID.SYSTEM);
Socket h = new Socket("192.9.200.155",9000);
Socket s = new Socket("192.9.200.155",9001);
Socket t = new Socket("192.9.200.155",9002);
int j;
CmdFunc.SendCmd(h,0,0x01,null);
CmdFunc.GetCmd(h,HwListReply);
CmdFunc.SendCmd(s,9,0x1e,StartLink); //New Link Proc Start
CmdFunc.GetCmd(s,NotUsedReply);
CmdFunc.SendCmd(s,37,0x00,TrapConfig); //TRAP Configuration
CmdFunc.GetCmd(s,NotUsedReply);
CmdFunc.SendCmd(s,155,0x03,SetUserOutput);//Sets User Output Format
CmdFunc.GetCmd(s,NotUsedReply);
catch(Exception e){}
else
textField1.setText( "000.000 is the null choice. Try another." );
public void receiveText1( String select )
Gselect=select;
public void makeMHZ()
String y = freqC.getSelectedItem();
y = y.substring(0,3);
mhz = Integer.parseInt(y);
//textField1.setText( y );
public void makeKHZ()
String y = freqC.getSelectedItem();
y = y.substring(4,7);
khz = Integer.parseInt(y);
//textField1.setText( y );
import java.awt.*;
import java.applet.*;
import java.io.RandomAccessFile;
import java.io.FileNotFoundException;
import java.io.IOException;
import java.io.LineNumberReader;
import java.awt.event.*;
import com.ms.security.*;
import netscape.security.*;
import netscape.util.*;
public class saver extends Applet implements ActionListener
String nameS = "Data.txt";
String dataS = "Default Data";
Button saveB;
public void init()
saveB = new Button("SaveFile");
add(saveB);
saveB.addActionListener(this);
public void actionPerformed(ActionEvent event)
if(event.getSource() == saveB)
RandomAccessFile RAF;
byte array0[] = dataS.getBytes();
try
if (Class.forName("com.ms.security.PolicyEngine") != null)
PolicyEngine.assertPermission(PermissionID.SYSTEM);
if(Class.forName("netscape.security.PrivilegeManager") != null)
netscape.security.PrivilegeManager.enablePrivilege("UniversalFileWrite");
catch (Throwable cnfe)
try
RAF = new RandomAccessFile(nameS, "rw");
// RAF.writeUTF(dataS);
RAF.write(dataS.getBytes());
RAF.close();
catch(Exception e)
public void receiveND(String name, String data)
if(name != null)
nameS = name;
dataS=data;
import java.io.RandomAccessFile;
import java.io.FileNotFoundException;
import java.io.IOException;
import java.io.LineNumberReader;
//import java.security.*;
import com.ms.security.*;
import netscape.security.*;
import netscape.util.*;
public class reader
//Signature sig;
public String getData(String filename, int pass)
//String nameS = "Data.txt";
String dataS = "Default Data Sucks";
String comma = ",";
int get = pass, count=0, top=0, bottom=0;
char[] work;
try
if (Class.forName("com.ms.security.PolicyEngine") != null)
PolicyEngine.assertPermission(PermissionID.SYSTEM);
if(Class.forName("netscape.security.PrivilegeManager") != null)
netscape.security.PrivilegeManager.enablePrivilege("UniversalFileRead");
catch (Throwable cnfe)
try
//sig.sign();
//nameS = filename;
RandomAccessFile RAF = new RandomAccessFile(filename, "r");
// dataS = RAF.readUTF();
dataS = RAF.readLine();
RAF.close();
catch(Exception e)
return e.toString();
work = dataS.toCharArray();
for(int i = 0; i < dataS.length(); i++)
if( work == ',' )
count++;
if(get == count)
bottom = i + 1;
if( (work == ',') && (count > get) && (top == 0) )
top = i;
dataS = dataS.substring(bottom,top);
return dataS;

Windows found a problem with file. publisher: unkown publisher

Similar Messages

Maybe you are looking for