Windows freezes after reinstall on p105-s6102

after reformatting drive and reinstalling XP on my p105-s6102 using the provided disk, Windows freezes at the blue motion line. the reinstall indicated it was successful. it does boot up ok in safe mode. chkdsk seems ok too. any ideas, anyone?
Solved!
Go to Solution.

When you restore the hard disk to its original out-of-the-box contents using Toshiba recovery media and still have a problem, it is not due to software.
If Windows works in Safe Mode, my best guess is that the video has failed, but that it still works using the display driver used in Safe Mode.
If that's the case, it should work when you boot with Enable VGA Mode.
A description of the Safe Mode Boot options in Windows XP
Time for a new computer.
-Jerry

Similar Messages

Windows freezes after seconders

After signing in windows will let me browse for30 seconds then it freezes up and only the mouse will move but I can't click on anything. Please help

Hi @john-giarritta1 ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Pavilion with Windows 8.1 freezing after logging in to it. Here is a link to resolving computer freezes.
Did you install new software?
You can do a system restore. System restore will help if something automatically updated and did not go well on the Notebook.
When performing a System restore please note remove any and all USB devices. Disconnect all non-essential devices as they can cause issues.
I would be happy to assist if needed. How Do I Find My Model Number or Product Number?
Please let me know.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

How to update to Windows 7 after reinstall system from recovery disk of Vista

Hi, Please I need your help, I have a Satellite L500, When I bought it came with VIsta, and complimentary update to Wiindows 7, after they release to the market. I had to reinstall my system with the recovery disk I had created, but I discover that Vista is working, and I can not find the way to update again to Windows 7. Do you know how to solve the problem.
Thanks

Please try the following:
KB2845626 - Cached credentials are not updated when you change your password in Windows
If you found my post helpful, please give it a Helpful vote. If it answered your question, remember to mark it as an Answer.

The "Downloads Window" freezes after I open a file from it.

Win7 system.
I just upgraded from FF12 to FF14.01.
I discovered that I was able to open only one or two files from the Downloads Window, after which the window would stop working properly. Double-clicking a file did nothing beyond highlighting its entry. Right-clicking and using the contextual menu doesn't open it either. Shutting down and reloading FF doesn't improve the situation. Only rebooting seems to get me anywhere, then only for a file or two.
PS: downgrading to FF 13 didn't help. The folder acts the same way in v-13. It was working fine in v-12 earlier today.
Thanks in advance for any wisdom anyone can pass along ...

in search bar, type "about:config"
Do this to see if it works.
search for "scan"
double click the first one to turn off the scanning of files when done.
"browser.download.manager.scanWhenDone"
-- set to false.
I'm running microsoft security essentials so i think that's what was causing my freezes. Here's is how i fixed mine.
Here's what i did :
Open microsoft security essentials and go to settings.
Under " Excluded Processes" .. browse for mozilla firefox in your program files and add it to the exclusion. --- click "add" then "save changes".
This somehow solved my problem... hopefully whoever reads this, this will also solve yours.

Windows freezes after startup

I have a 2008 IMAC originally running Loepard and bootcamp with XP home edition on bootcamp partition, all worked fine. I upgraded to Snow Leopard and everything still worked fine. Hard drive failed last week and was replaced by Apple with 10.6.6 OSX. Restored OSX side with time machine and all worked perfectly. Set up new boot camp partition with 20 gigs of space to reinstall XP. Installed XP SP2 with original disk, then used my Snow Leopard disk to install drivers as called for. It says all installed correctly. When windows starts up it opens fully, but the mouse and keyboard are frozen so I cannot do anything with it. I have even reinserted the OSX disk to reinstall drivers to no avail. I have also uninstalled the bootcamp partition and reinstalled the partition and XP several times with the same result. Any thing else I should try?
Thanks for your help

You could try "Safe Mode/Safe Mode with Network support?" menu option available to you at startup (right after white screen in a Mac Pro) by tapping F8 key on startup.
If drivers then work for kbd, mouse, I guess you could try update from some Bootcamp source. I've done this myself when both were dead in Windows. Trying different mouse, keyboard is another option.

Msi GE60 windows freeze after tapping ?

hi
just few hours from now,happen to me some thing unusual
there was a fly in the room, and it stand right in the area under the Bluetooth sign under the touch pad
so, i decide to tap it by my finger , what happen is my finger tapped the area blew that LED exactly...and mu laptop is freezed
i was....."what the &&&& happened ? "
pressed the power button 5-6 sec to turn off the pc
and turn it on again , then i decide to repeat what happen last time,maybe there some thing wrong
same thing happen after tapping again in that area ( the tapping was light or soft , if you place 2 finger to each other and release the other finger )
so, what in that area that make the PC freeze ? RAM ? something else ?

Quote from: Locry on 06-January-13, 20:36:43
It's probably not A SHORT CIRCUIT... it may just be a loose contact somewhere in that vicinity. Short circuits are usually more unforgiving, and permanent.
that what i thought too
in some laptops,if you place the iphone in some area the screen will turn off

DW & FW 2004 Freeze after reinstall on Mac

The other day, I had to reformat my Mac and reinstall all
major software. However, I am unable to get DW or any of its
associated apps to run. When I try to reinstall DW Studio 2004, the
installer encounters an error and can't go on. When I try a second
time, all of the packages appear to be installed and I get a
message stating that the installation completed successfully.
However, when I try to start any of the apps, the dock icon bounces
a few times and then the app stops responding and I must "force
quit". I tried deleting all of the DW folders and then pulled them
in from my backup disk image that was created the day of the
reformat of the drive, but got the same result, when I tried to run
any of the apps. I also pulled in preference files and pplication
support files from backup and still get the same freeze.
Any ideas???

GurusInc.com wrote:
> The other day, I had to reformat my Mac and reinstall
all major software.
> However, I am unable to get DW or any of its associated
apps to run. When I try
> to reinstall DW Studio 2004, the installer encounters an
error and can't go on.
> When I try a second time, all of the packages appear to
be installed and I get
> a message stating that the installation completed
successfully. However, when I
> try to start any of the apps, the dock icon bounces a
few times and then the
> app stops responding and I must "force quit". I tried
deleting all of the DW
> folders and then pulled them in from my backup disk
image that was created the
> day of the reformat of the drive, but got the same
result, when I tried to run
> any of the apps. I also pulled in preference files and
pplication support files
> from backup and still get the same freeze.
>
> Any ideas???
>
http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=tn_18933
Mick

Windows freezing after loading setup towindows log . ahcix86s.sys

Hi i have a s5160a hp desktop with vista windows.When i boot it loads a line down to the screen and then it hungs-freeze in a windows logo screen .I try to instal other windows vista or 7 or linux and always is loading setup and then freezes in the windows logo screen orin linux in a screen that says it is need drivers .I tried even from external cdrom player all thrse setups same result.i used other hard disk from other pc and the probelm is same f8 safe mode i used all options.no result. In some of them in f8 it loads drivrrs and always stops in ahcix86s.sys. please give me some help thanks [edited email by moderator]

Hello @nioart,
I understand that your computer freezes on startup no matter which operating system you are trying to install. I suspect that you have a hardware issue on your computer and would advise you to review and follow the steps contained within the HP Support document: Testing for Hardware Problems Using Hardware Diagnostic Tools (Windows Vista). As this document was created to test your hardare it should if followed provide you with the required information on what is wrong.
Please re-post if you require additional support. Thank ou for posting ont he HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Windows freeze after load-up.

This is just a comment.
I have had this happen twice both after power failures where the system is told to stay shut down. Upon rebooting it seemed that my desktop was frozen, when in actuallity all i needed to do was unplug the usb mouse and replugg it back in to work. Dont know why, just thought id mention it in case someone has a similar problem.

That's interesting. Sometimes the BIOS doesn't recognize the key to enter the BIOS after a reboot. I wonder if they are related.

Hp probook 6555b will freeze after window updated

after many problems I did format the hard drive reinstal windows and after some update will freeze.....I can't do anything just power of and re-start.....I don't know what it is it will not finish update windows becouse after the last updated will freeze ...I dont know what to do ...plus my windows code to validate windows from the stiker from the back of the laptop will no acepted by microsoft....what can I do

the mini2140_fan the cause for your problem maybe at your antivirus software.
it happened to me when i changed my antivrus software to COMODO.
try to uninstall the antivirus software then try the fn f8 again.

Spotify Desktop on Windows freezes consistently after playing a specific video ad

Hi, I'd like to report the following issue: DescriptionSpotify Desktop on Windows freezes consistently after playing a specific video ad (screenshot attached). This still happens after a reinstall. Please note that the UI is usable just fine. I can close the ad, browse playlists etc. but since the ad "haven't finished" it's not possible to play anything.This is happening on two devices (workstation and laptop), both running Windows 8.1. A more detailed description, using numbered steps1. Play any tracks2. Video ad comes in and plays without issues3. After 15 seconds it freezes and it's not possible to re-play4. Need to restart Spotify What I expected to happenResuming normal playback, or at least getting the next ad :) What actually happenedAd playback - and hence the whole playback - frozen. My iPad/iPhone modelNot using mobile Device’s Operating SystemWIndows 8.1 Is your device jailbroken?n/a Approximately how many playlists do you have?~15 My mobile Spotify versionn/a My desktop Spotify version (if applicable)Spotify Free 1.0.7.157.g2a6526f9 My provider and countryUsing a fiber optics connection, Slovakia

i have this problem too. and when i restart spotify after listening one song the ad is there again....

How can i reinstall itunes 10.5.2 on windows xp, after i deleted the older version? help please!

it's been painfull not to get the answer for this issue, since i did update every single apple features that works with my pc windows xp, thi's the 1rst time that i have this problem! anyone out there can help pleeeaasseee?????

"how can i reinstall itunes 10.5.2 on windows xp, after i deleted the older version?"
Go to apple.com/itunes/download
Download the current version.
Install it.
When installing, are specific errors being generated?

I had creative cloud installed in a parallels deskto virtual machine on my mac, I delete the virtual machine without deactivate the creative cloud. after reinstall a new VM running windows 8.1. pro 64 bits, I downloaded the creative cloud installer but it

I had creative cloud installed in a parallels deskto virtual machine on my mac, I delete the virtual machine without deactivate the creative cloud. after reinstall a new VM running windows 8.1. pro 64 bits, I downloaded the creative cloud installer but it does not install ang give an Error code 72, it is assuming that I already are using the Creative cloud in 2 computer, but itis no the case, how to solve this situation?

Dave: I did the Microsoft Update two days before this happened, and rebooted as required. I just created a new restore point and lauched Creative Cloud. Now I get the famous white screen:
It just sits and spins (been 10 minutes now).
Fortunately, I saved away this command (which I've had to use 4 or 5 times already):
del %USERPROFILE%\AppData\Local\Adobe\OOBE\opm.db
Unfortunately now, I get this (even after closing the above window):
The process cannot access the file because it is being used by another process.
So I killed everything that said "Adobe" in the task manager and this time, the command succeeded.
Fortunately, the current apps seem to still work. I can't seem to find the "Creative Cloud" app in the applications on my system, but I launched Photoshop CC, told it to look for updates, and got a list of the 5 prgorams that need updates in the Adobe Application manager:
I will proceed with the updates, holding my breath.

Satellite Pro A210 PSAFHE - Windows 7 - freezes after sleep/hibernate

I have a Satellite Pro A210 PSAFHE running dual boot Windows XP/7
Using Windows 7 - either 32 or 64 - the system always freezes after sleep/hibernate.
This never happens with XP which sleeps and hibernates OK..
There are no drivers at all for this notebook on the site http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=EU
I like System 7 and use it on my other computers but without sleep/hibernate I will revert to XP.

Hi
> There are no drivers at all for this notebook on the site http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=EU
Sorry mate but you are wrong.
All Win 7 drivers for Satellite Pro A210 are released on the Toshiba European driver page I recommend checking it again
Since this issue does not appear using Win XP, I can say for sure that this has nothing to do with the hardware but its a software related issue
I recommend updating the graphic card driver
Furthermore there is a new BIOS for Sat Pro A210 PSAFHEits v2.0
Check if you are using the latest version

I recieved a message that MSVCR80.ddl was missing and iTunes would activate. After reinstalling iTunes, I'm receiving an "Error 7 (Windows error 126)" msg. What should I do?

I recieved a message that MSVCR80.ddl was missing and iTunes would activate. After reinstalling iTunes, I'm receiving an "Error 7 (Windows error 126)" msg. What should I do?

Hello, Jack.
You will find this article helpful in troubleshooting the error that you are receiving.
iTunes for Windows: "Error 7" message when opening iTunes
http://support.apple.com/kb/ts3074
Regards,
Jason H.

Windows freezes after reinstall on p105-s6102

Similar Messages

Maybe you are looking for