Windows FTP access into 2nd internal HD

How do you set FTP access into a secondary (internal) hard drive? I am able to set up a user account and can log in (from Windows WS-FPTpro) into that users account (on the main HD), but is it possible to allow them to get into the secondary internal HD?
I checked the "get info" and tried changing the "Group" to the user account, but I still can't get into the drive from my windows machine.
Is this possible with the built-in FTP server in Mac OS 10.3.9??
Thanks
G5 - Dual 2GHz Processor Mac OS X (10.3.8)

Hmmm, I just FTPed into another Mac, this one I'm on is owned by bdaqua8, the one I was connecting to was/is owned by bdaqua4, at ftp login, I erased the bdaqua8, put in bdaqua4 as the name, and bdaqua4's password, it took me to bdaqua's Home Folder, but above the file list from the other computer, (not familiar with the SW your using, I'm using TransmitX, but the free Cyberduck is similar), anyway, above that list is a little menu to allow me to change the directory it's showing, backstepped Users, the parent of bdaqua4, backstepped all the way back to Macintosh HD, there was the Applications folders and everything else at root of the disk, I could see all files folders that bdaqua4 could on that machine... perhaps you're missing the path changing thing, or maybe enter / as an initial path when you login?
Leaving work now, but when I get home I'll try your SW to see what is happening.

Similar Messages

Installing Windows XP on a 2nd internal drive

Hi,
I'm attempting to install Windows XP on another internal hard drive on my new Mac Pro. So I run the Boot Camp assistant and select the drive in bay 2 - which is completely empty. I select the option to "Erase disk and create a single partition for Windows". I then insert my Windows XP install disc and restart. But when it gets to the Windows installer, I don't know with drive to select! I don't want to erase my Mac OS X drive by mistake. It's not clear at all which drive i should choose. Neither of them mention "Bootcamp" and it claims both drives have partitions which are "unrecognized".
Any suggestions on how to determine in the Windows installer which drive to use?
I'm running Mac OS X 10.5.2.

I found a solution.
I went into Disk Utility and formatted the 2nd drive. 1 partition. FAT32. MBR partitioning scheme. I then called it "WINDOZE".
In Boot Camp, I then selected the option to simply "Start the Windows Installer" and selected the drive in Bay 2. When Windows boots up, it recognizes the 2nd drive with the name "WINDOZE" and the format as FAT32. So I can tell which drive is which and select it without accidently erasing my Mac OS X drive.
HTH someone.

FTP access into HD

I can now ftp back and forth between my home iMac and office iMac.
I can swap files etc but how do I access my hard disk on the other computer.
I created a file with an alias of the hd but that didnt work.
I can access ektop
documents incomplete shared pictures music etc etc .it seems I am limited to files and folders.
Specifically I was looking for a .dmg file I had in my applications folder
I am sure I am missing something obvious I just cant see what .
j

Hmmm, I just FTPed into another Mac, this one I'm on is owned by bdaqua8, the one I was connecting to was/is owned by bdaqua4, at ftp login, I erased the bdaqua8, put in bdaqua4 as the name, and bdaqua4's password, it took me to bdaqua's Home Folder, but above the file list from the other computer, (not familiar with the SW your using, I'm using TransmitX, but the free Cyberduck is similar), anyway, above that list is a little menu to allow me to change the directory it's showing, backstepped Users, the parent of bdaqua4, backstepped all the way back to Macintosh HD, there was the Applications folders and everything else at root of the disk, I could see all files folders that bdaqua4 could on that machine... perhaps you're missing the path changing thing, or maybe enter / as an initial path when you login?
Leaving work now, but when I get home I'll try your SW to see what is happening.

Installing Windows 7 with boot camp as whole partition on 2nd internal hard drive

Hi all,
I am unsure what is the recent changes with Apple boot camp. But when I used boot camp utilitiy on my Mac Pro (Mid 2010) to install windows 7 64 bits. It would not install and created a whole lot of problems.
After I initialise the process to install windows 7 using boot camp utilities, I chose the option to create a single partition to installl windows 7 on my secondary internal hard drive (1TB). After I restarted my Mac Pro and started the Windows 7 installation process, I was unable to install Windows 7 on the BOOTCAMP partition created by the boot camp utilitiy. I got an error something about Windows cannot be installed on the selected forum because the driver contained GPT details.
I tried to format the BOOTCAMP partition, but it ended up with errors. I tried to delete and recreate the BOOTCAMP partition in Windows setup, but failed with errors again. As I could not go any further with the Windows 7 installation, I had to hard reset my Mac Pro and tried to reboot back into Mac OS X Lion and that's when the nightmare begin.
Not only I could not boot into OS X, I could not use any of the startup key combinations (i.e. Hold option key to select start up disk, option + R to boot the lion recovery drive, not boot from any external firewire drive installed with OS X Lion). Basically none of the key combinations worked except for the holdingi F12 and mouse key to eject CD.
The only thing I could boot the Mac Pro with is the windows installation CD and Linux Ubuntu Raring Distro. I can install the ubuntu distro without any issue. However, I could not boot my mac pro back into OS X as Linux does not support bootcamp. The only way I could use Mac OS X Lion again is to delete the partition OS X Lion was installed on, and then I was be able to install Windows 7 without any issue.
After installing windows 7 I would have to download boot camp and then use the boot camp control panel to restart in the Mac Pro installation DVD and I will have to reinstall OS X again. After installing OS X, I went to System Preference and tried to select Windows 7 as startup disc. But I failed to as it says "Windows 7" Was installed via another utility. I would have to erase the partition and reinstall Windows 7 again using bootcamp utility. If I try to install windows 7 again, the horror I described above repeats again.
From my understanding, the Boot camp utility creates a new EFI bootrom with Master Boot Record (MBR) in FAT32 format. Therefore I could not boot back into Mac OS X without using boot camp in windows 7 as none of the boot combinations key worked.
I want to ask if anyone is experiencing the same issue as i do, and if there are any solutions to the problem I am experiencing. I never had such issue before. I was able to install Windows 7 on my 2ndary internal hard drive without issue using boot camp. I don't what has changed. I have googled for solution, I only found something related to XOM but nothing else.
If anyone can provide me with any help in regards to installing Windows 7 as a whole partition on a secondary internal hard drive. It'd be grealy appreciated. Thank you in advance.

If you have driver issue, just pre-download the boot camp drivers and save them on an external drive or burn them onto a cd, you will be able to load drivers via the advanced installation option during windows setup, that is if your osx partition isn't actively preventing you from installing win7 on the BOOTCAMP Partition created by boot camp assistant, I find this rather ironic, took me 3 days to figure out this issue, I was stuck without being able to boot into anything beside the windows cd, which wasn't even helpful as I could not install windows as I did not want to delete my osx partition. I lost all my data becsuse of it, as I had no idea what was going on. I tried to recover the partition using testdisk, hfsprogs and gparted in ubuntu life cd but they dont support HFS+. As I could not access osx terminal (couldn't even boot into osx installation dvd with that dreaded MBR created by boot csmp). I could not use pdisk in terminal to restore the osx partition map. Though luck for me. Called applecare and they had no idea what the problem was, and as usual they orgsnised for hard drive replacement. But it was clearly a software issue.
They will have to fix bay2 for me as I can no longer detect any hard disk connected to that bay.

Added a 2nd internal SCSI drive into my 7500/100 does not show up.

Hi.
I added a 2nd internal SCSI drive into my 7500/100. It does not show up on the desk top. I rebuild the desktop reset the cuda and ran SCSIProbe. The computer starts up on the newly added drive. No sign from the original drive. Please help.
Walter

there are jumpers on the drives that need to be properly set. Both drives are set with the terminating resistor on, one needs to be off. Carefully note nthe placement of the existing jumpers then remove the jumper from the drive in the middle connector.

How to transfer excel files(on ftp server) into internal table?

hello,everyone
pls tell me how to transfer excel files those on a ftp server into internal table?
ps.i know the function 'ftp_server_to_r3',it can help to transfer flat file.

Hi,
I believe you want to get the data from the FTP Server to R3.
I am also sending the code. Have a look and it would help you.
First get the Password and user name and the FTP Server Path where file is stored and FTP Server Host name
FUNCTION zfi_ftp_get.
*"*"Local Interface:
*" IMPORTING
*"     VALUE(I_FILENAME) TYPE C
*" TABLES
*"      T_BLOB STRUCTURE ZFI_TLM_LENGTH OPTIONAL " is a table type with a field called line of length 992
*"      RETURN STRUCTURE BAPIRET2 OPTIONAL
DATA : i_password(30)     TYPE c,
         i_user(30)         TYPE c,
         i_host(30)         TYPE c,
         i_rfc_destination TYPE rfcdes-rfcdest,
         i_length           TYPE i,
         i_folder_path(100) TYPE c.
DATA:   lv_blob_length   TYPE i.
DATA:   lv_length        TYPE i, "Password length
          lv_key           TYPE i VALUE 26101957,
          lv_password(30) TYPE c,
          lv_ftp_handle    TYPE i,
          lv_cmd(80)       TYPE c.
DATA: BEGIN OF result OCCURS 0,
        line(100) TYPE c,
        END OF result.
TYPES: BEGIN OF ty_dummy,
         line(392) TYPE c,
       END   OF ty_dummy.
DATA: lt_dummy TYPE TABLE OF ty_dummy,
        ls_dummy LIKE LINE OF lt_dummy.
i_password        = 'vnhdh'.
i_user            = 'sdkgd'.
i_host            = 'sbnksbg'.
i_rfc_destination = 'SAPFTP'.
i_length          = '992'.
i_folder_path     = '/hioj/hohjk/hh'.
lv_length = STRLEN( i_password ).
CALL FUNCTION 'HTTP_SCRAMBLE'
    EXPORTING
      SOURCE      = i_password
      sourcelen   = lv_length
      key         = lv_key
    IMPORTING
      destination = lv_password.
CALL FUNCTION 'FTP_CONNECT'
    EXPORTING
      user            = i_user
      password        = lv_password
      host            = i_host
      rfc_destination = i_rfc_destination
    IMPORTING
      handle          = lv_ftp_handle
    EXCEPTIONS
      not_connected   = 1
      OTHERS          = 2.
IF sy-subrc = 1.
    return-type = 'E' .
    return-message = 'FTP Connection not Successful'.
    APPEND return.
ELSEIF sy-subrc = 2.
    return-type = 'E' .
    return-message = 'FTP Connection not Successful'.
    APPEND return.
ELSEIF sy-subrc EQ 0.
    return-type = 'S' .
    return-message = 'FTP Connection Successful'.
    APPEND return.
    CONCATENATE 'cd' i_folder_path INTO lv_cmd SEPARATED BY space.
    CALL FUNCTION 'FTP_COMMAND'
      EXPORTING
        handle        = lv_ftp_handle
        command       = lv_cmd
      TABLES
        data          = result
      EXCEPTIONS
        command_error = 1
        tcpip_error   = 2.
    IF sy-subrc = 1.
      return-type = 'E' .
      return-message = 'Command Error Occured during open of FTP Folder'.
      APPEND return.
    ELSEIF sy-subrc = 2.
      return-type = 'E' .
      return-message = 'TCIP Error Occured during open of FTP Folder'.
      APPEND return.
    ELSE.
      REFRESH t_blob.
      lv_blob_length = 992.
      TRANSLATE i_filename TO LOWER CASE.
      CALL FUNCTION 'FTP_SERVER_TO_R3'
        EXPORTING
          handle      = lv_ftp_handle
          fname       = i_filename
        IMPORTING
          blob_length = lv_blob_length
        TABLES
          blob        = lt_dummy.
      t_blob[] = lt_dummy[].
    ENDIF.
ENDIF.
ENDFUNCTION.
Regards
Sajid
Edited by: shaik sajid on Nov 16, 2010 7:25 AM

FTP access via Window browsers

I've been struggling with Windows users accessing our FTP site via their browser. Without including the username within the URL it's considered an anonymous login attempt. I don't like this method since it makes the usernames public domain. Can anything be done short of allowing anonymous access?
ftp://@ftp.domainname.com (anonymous login)
ftp://username:@ftp.domainname.com (works but reveals username)

Hi Steve,
Go to the FTP Server settings, you will find the anonymous login is checked. Please uncheck this option to avoid anonymous login.
I've been struggling with Windows users accessing our
FTP site via their browser. Without including the
username within the URL it's considered an anonymous
login attempt. I don't like this method since it
makes the usernames public domain. Can anything be
done short of allowing anonymous access?
ftp://@ftp.domainname.com (anonymous login)
ftp://username:@ftp.domainname.com (works but reveals
username)
XServe Mac OS X (10.4.3)

Unable to access vpn box internal address after vpn

Hi all. My office network is protected by asa5510 firewall with vpn configured. When i vpn into my office network i could not access the firewall via the firewall's internal address using telnet etc even though i have already enable telnet. The firewall is my office network gateway. Below is my config. Pls advise. Thks in advance. Access to my office network is fine using vpn.
hostname firewall
domain-name default.domain.invalid
enable password xxx
names
dns-guard
interface Ethernet0/0
nameif inside
security-level 100
ip address 192.168.1x.x 255.255.255.0
interface Ethernet0/1
nameif DMZ
security-level 50
ip address 192.168.2x.x 255.255.255.0
interface Ethernet0/2
nameif outside
security-level 0
ip address 8x.x.x.x 255.255.255.240
interface Ethernet0/3
shutdown
no nameif
no security-level
no ip address
interface Management0/0
nameif management
security-level 100
ip address 192.168.1.1 255.255.255.0
management-only
passwd xxx
ftp mode passive
same-security-traffic permit inter-interface
access-list inside_access_in extended permit ip 192.168.1x.0 255.255.255.0 any
access-list outside_access_in extended permit icmp any any
access-list outside_access_in extended deny ip any any
access-list DMZ_access_in extended permit ip 192.168.2x.0 255.255.255.0 any
access-list inside_nat0_outbound extended permit ip any 172.16.0.0 255.255.255.224
access-list split-tunnel standard permit 192.168.1x.0 255.255.255.0
pager lines 24
logging enable
logging asdm-buffer-size 500
logging asdm informational
mtu inside 1500
mtu DMZ 1500
mtu outside 1500
mtu management 1500
ip local pool addpool 172.16.0.1-172.16.0.20 mask 255.255.0.0
no failover
monitor-interface inside
monitor-interface DMZ
monitor-interface outside
monitor-interface management
asdm image disk0:/asdm-507.bin
no asdm history enable
arp timeout 14400
nat-control
global (outside) 100 interface
nat (inside) 0 access-list inside_nat0_outbound
nat (inside) 100 192.168.1x.0 255.255.255.0
access-group inside_access_in in interface inside
access-group DMZ_access_in in interface DMZ
access-group outside_access_in in interface outside
route outside 0.0.0.0 0.0.0.0 8x.x.x.x 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00
timeout mgcp-pat 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout uauth 0:05:00 absolute
group-policy vpn internal
group-policy vpn attributes
dns-server value 192.168.1x.x 192.168.1x.x
split-tunnel-policy tunnelspecified
split-tunnel-network-list value split-tunnel
webvpn
username ciscoadm password xxx encrypted privilege 15
username ciscoadm attributes
vpn-group-policy vpn
webvpn
http server enable
http 192.168.1x.x 255.255.255.255 inside
http 192.168.1.0 255.255.255.0 management
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
sysopt connection tcpmss 13800
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-SHA
crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map
crypto map outside_map interface outside
isakmp enable outside
isakmp policy 10 authentication pre-share
isakmp policy 10 encryption 3des
isakmp policy 10 hash sha
isakmp policy 10 group 2
isakmp policy 10 lifetime 86400
tunnel-group vpn type ipsec-ra
tunnel-group vpn general-attributes
address-pool addpool
default-group-policy vpn
tunnel-group vpn ipsec-attributes
pre-shared-key *
telnet 192.168.1x.x 255.255.255.0 inside
telnet timeout 5
ssh timeout 5
console timeout 0

Hi all. Below is my configuration. After i enable "management-access inside" i could access my firewall internal ip via ping after establishing vpn connection but not others like telnet even though "telnet 0.0.0.0 0.0.0.0 inside" is enabled. Pls advise.
interface Ethernet0/0
nameif inside
security-level 100
ip address 192.168.1x.254 255.255.255.0
interface Ethernet0/1
nameif DMZ
security-level 50
ip address 192.168.2x.254 255.255.255.0
interface Ethernet0/2
nameif outside
security-level 0
ip address 8x.xx.xx.xx 255.255.255.240
interface Ethernet0/3
shutdown
no nameif
no security-level
no ip address
interface Management0/0
nameif management
security-level 100
ip address 192.168.1.1 255.255.255.0
management-only
passwd xxx
ftp mode passive
same-security-traffic permit inter-interface
access-list inside_access_in extended permit ip 192.168.1x.0 255.255.255.0 any
access-list inside_access_in extended permit esp any any
access-list inside_access_in extended permit gre any any
access-list outside_access_in extended permit icmp any any
access-list outside_access_in extended deny ip any any
access-list DMZ_access_in extended permit ip 192.168.2x.0 255.255.255.0 any
access-list inside_nat0_outbound extended permit ip any 172.16.0.0 255.255.0.0
access-list split-tunnel standard permit 192.168.1x.0 255.255.255.0
access-list prod standard permit host 192.168.1x.x
access-list prod standard deny any
pager lines 24
logging enable
logging asdm-buffer-size 500
logging asdm informational
mtu inside 1500
mtu DMZ 1500
mtu outside 1500
mtu management 1500
ip local pool pool 172.16.0.1-172.16.0.20 mask 255.255.0.0
no failover
monitor-interface inside
monitor-interface DMZ
monitor-interface outside
monitor-interface management
asdm image disk0:/asdm-507.bin
no asdm history enable
arp timeout 14400
nat-control
global (outside) 100 interface
nat (inside) 0 access-list inside_nat0_outbound
nat (inside) 100 192.168.1x.0 255.255.255.0
access-group inside_access_in in interface inside
access-group DMZ_access_in in interface DMZ
access-group outside_access_in in interface outside
route outside 0.0.0.0 0.0.0.0 8x.xx.xx.xx 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00
timeout mgcp-pat 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout uauth 0:05:00 absolute
group-policy vpnuser internal
group-policy vpnuser attributes
dns-server value 192.168.1x.x 192.168.1x.x
split-tunnel-policy tunnelspecified
split-tunnel-network-list value prod
default-domain value mm.com
webvpn
username user password xxx encrypted privilege 15
username user attributes
vpn-group-policy vpnuser
webvpn
http server enable
http 192.168.1x.x 255.255.255.255 inside
http 0.0.0.0 0.0.0.0 inside
http 192.168.1.0 255.255.255.0 management
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
sysopt connection tcpmss 13800
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-SHA
crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map
crypto map outside_map interface outside
isakmp enable outside
isakmp policy 10 authentication pre-share
isakmp policy 10 encryption 3des
isakmp policy 10 hash sha
isakmp policy 10 group 2
isakmp policy 10 lifetime 86400
tunnel-group vpnuser type ipsec-ra
tunnel-group vpnuser general-attributes
address-pool pool
default-group-policy vpnuser
tunnel-group vpnuser ipsec-attributes
pre-shared-key *
telnet 0.0.0.0 0.0.0.0 inside
telnet timeout 5
ssh timeout 5
console timeout 0
management-access inside
dhcpd address 192.168.1.2-192.168.1.254 management
dhcpd dns 8x.x.1x.x 8x.x.x.x
dhcpd lease 3600
dhcpd ping_timeout 50
dhcpd enable management

How do I install Bootcamp on 2nd internal iMac drive?

Have a new iMac with a 1TB internal HD in addition to the SSD startup drive.
Can I, and if so how do I, install Bootcamp on the 1TB internal HD? Will the Bootcamp Assistant point out the 2nd internal drive and proper location during the install process?
I purchased this iMac w/wireless keyboard, mouse, and trackpad...is that going to be a problem during the Windows install?
Thanks,
David

Bootcamp actually gave me an option to install on the 2nd internal iMac drive and it's working like a champ!
Thinking I was relegated to a Bootcamp partition on my SSD startup drive, I went ahead and delved into the Bootcamp install, only to find an option to install on either my SSD startup drive or my 2nd internal iMac drive. I simply chose the 2nd drive and lo, and behold, as I hold the Option button down on startup, both of my operating systems (OS X and Windows) available for selection.
Thanks for all the help, but it looks as though the latest edition of Bootcamp has addressed this issue, I am quite pleased.
David

FTP Access through router.

Hello,
I am trying to set up a simple ftp server to exchange files with my friends in other cities. When i start the service (FTP Access) it gives me this link:
ftp://192.168.0.3/
However this ip is the internal ip address i use to connect with my wireless router, and not my actual ip address. So is there a way to make it work, or this service can only be used if you dont share the internet?
Any advice will be very much appreceiated, bear in mind that i have control of the router so i can easily set up port permissions.
ps. I guess i 'll have the same problem if i try to set up a web server, and the solution will be the same as well.
THANKS!!
Mac Mini Duo Mac OS X (10.4.6) having switched one month now and never going baaaaack!

Hi frag,
Yes that IP address is on your internal network - your Mac has no knowledge of the external IP address that your router interfaces to the outside world with.
The config page for your router, or an external IP tracer, will show you the address that your friends need to use. But, depending on the connection you have to your ISP, your IP address may change on occasion (dynamic). In which case you may have to look into using a dynamic DNS provider which allows a fixed domain name to point to a dynamic IP.
Also, you are probably better off to use a 3rd party FTP server - such as PureFTPd Manager - which allows more flexibility with config, which will be very helpful for navigating through the router.
Graham

BSOD appears to occur everytime the system tries to access a 2nd HDD (IDE)

Pretty much as above, one day I left my machine ripping a CD into iTunes (stored on 2nd IDE drive) and when I returned the machine had hung with a blank screen.
I then tried everything to wake the machine up but nothing except a reboot worked.
Then when it started to reboot it would just BSOD on windows startup, sometimes during startup other times after I had entered my login details.
I have done some testing and seem to have narrowed it down to the 2nd HDD. If I don't access the 2nd HDD (for example by disabling it in the bios) machine seems to work OK, but as soon as I try and access the disk, even to save a file on it instant BSOD.
If anyone can offer some guidance it would be greatly appreciated.

I'm having this same problem with my newly built system, but in my case it happens only when doing large, continuous reads or writes to the IDE hard drive. The other two SATA hard drives work perfectly. At first I thought it was some teething bugs in the bios or drivers, but I was worried about the PSU as well. I've only swapped out the mb, cpu, memory and graphics card, so I know that there's nothing wrong with the HDDs or the cables, but with the added load to the PSU... Seems odd though that it would manifest itself only when accessing the IDE hard drive.
I will try to make further tests with other PSUs, and I've ordered a IDE2SATA adapter and will try that as well.

Deployment runs into an internal error NI installers

Hi,
When I try to deploy my system in TSv4.1.1, the deployment runs into an internal NI installers problem. Error in deployment status log is "An internal error occurred involving an installer function. This type of error usually involves a problem with one or more National Instruments Installers. For more information open the following log file:
...\Temp\Detailed_Installer.log (path replaced). " I can't find any suspicious in that file. I can even find error line in status log stating "Error Code:-603 Read Registry Value STR.vi".
What I have done is that I have upgraded from TSv3.5 to TSv4.1.1 which is now running in a new computer. I use the same .tsw file as in v3.5. I have verified and I suppose all files in .tsw have correct paths according to changes made from 3.5 to 4.1.1. I use some old DLLs compiled in CVI 8.x included in .tsw.
I have even tried a create a new deployment file without any further success.
I even get the internal error message window above when I access installer options tab and drivers and components window after pressing OK or cancel button.
any help ?
regards,
petri

hi,
Attached a status log from a new workspace with a project and sequence file. Deployment is as well a new.
I can't find *.vis from harddrive.
Installation is FDS from NI developer Suite fourth Quarter 2008 DVD.
regards,
petri
Starting Log.
Error occurred
Error Code:-603
Read Registry Value STR.vi
Starting Analysis
Starting to process workspace file
Workspace Processed
Finished Analysis
+++++++++++++++++++++++++++++++++++++++
Error occurred
Error Code:-30
TestStand - Deployment Utility Splash Screen.vi >> TestStand - Distribution Wizard GUI.vi >> TestStand - Additional Components Dialog.vi >> TestStand - Reselect Meta Installer Products.vi >> TestStand - Get Dependencies of TS Engine.vi >> MDFProdPreview_AddProduct.vi
{95C82647-A6CB-492F-A5A9-66A282CAD7F3}
An internal error occurred involving an installer function. This type of error usually involves a problem with one or more National Instruments Installers. For more information open the following log file:
...\Temp\Detailed_Installer.log

I have a late 2012 iMac running osx 10.8.5. I keep losing access to my internal hard drive. I can reboot and regain access and it will last for a few minutes or hours. Disk utility does not seems to help.

I have a late 2012 iMac with an I5 precessor running OSX 10.8.5 and a 1tb internal hard drive. I keep losing access to the internal hard drive/startup disk.
I can reboot and everything operates as normal for a few minutes or hours but then I lose all access again to anything on the hard drive. The computer is still up and running but no files can be accessed and certain websites cannot be acessed even though internet access appears to be normal. Disk utility can only find permission errors related to iTunes which can be repaired only to come back at the next scan (I would not think permission errors would have anything to do with the hard drive crashing). It does not seem to matter what program I am using at the time access is lost and it can lose access sometimes right after reboot when no program is running.

You will need to boot into the Recovery Volume (command - R on a restart or hold down the option/alt key during restart and select it) to run Disk Utility/Disk Repair.

Crashes when running applications from network share - "Windows cannot access the file for one of the following reasons"

Hi,
starting a couple of weeks ago, we get the following error(s) when running applications from a network share. We don't know what causes this, we are not aware of any major changes in our network infrastructure or client/Server configuration. We did upgrade
a lot of machines to Windows 8, but the issue also occurs on older Win7 computers.
We figured out a workaround though: The applications run fine when launching from a FQDN share (like
\\share.domain.Company.com) and only cause problems when running from
\\share directly. They have worked fine for years without FQDN though.
Any ideas?
Error Details (the Kind of error differs greatly):
# 1 #
Log Name: Application
Source: Application Error
Date: ...
Event ID: 1005
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: vmDEV
Description:
Windows cannot access the file for one of the following reasons: there is a problem with the network connection, the disk that the file is stored on, or the storage drivers installed on this computer; or the disk is missing. Windows closed the program XYZ
because of this error.
Program: XYZ
File:
The error value is listed in the Additional Data section.
User Action
1. Open the file again. This situation might be a temporary problem that corrects itself when the program runs again.
2. If the file still cannot be accessed and
- It is on the network, your network administrator should verify that there is not a problem with the network and that the server can be contacted.
- It is on a removable disk, for example, a floppy disk or CD-ROM, verify that the disk is fully inserted into the computer.
3. Check and repair the file system by running CHKDSK. To run CHKDSK, click Start, click Run, type CMD, and then click OK. At the command prompt, type CHKDSK /F, and then press ENTER.
4. If the problem persists, restore the file from a backup copy.
5. Determine whether other files on the same disk can be opened. If not, the disk might be damaged. If it is a hard disk, contact your administrator or computer hardware vendor for further assistance.
Additional data
Error value: C000020C [ also seen with code C00000C4]
#2 (German error Messages from now on, we only use German OSes, the above english one is translated based on similar error Messages I found on the web) #
Name der fehlerhaften Anwendung: XYZ.exe, Version: 2015.0.496.5054, Zeitstempel: 0x54ea67c3
Name des fehlerhaften Moduls: clr.dll, Version: 4.0.30319.34014, Zeitstempel: 0x52e0b784
Ausnahmecode: 0xc0000006
Fehleroffset: 0x00026549
ID des fehlerhaften Prozesses: 0x13ac
Startzeit der fehlerhaften Anwendung: 0x01d055a854d36445
Pfad der fehlerhaften Anwendung: \\share\application.exe
Pfad des fehlerhaften Moduls: C:\Windows\Microsoft.NET\Framework\v4.0.30319\clr.dll
Berichtskennung: 949ea933-c19b-11e4-bf04-78542e186754
Vollständiger Name des fehlerhaften Pakets:
Anwendungs-ID, die relativ zum fehlerhaften Paket ist:
Anwendung: XYZ.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: Ausnahmecode c0000006, Ausnahmeadresse 720B6549
Stapel:
# 3 #
Anwendung: WpfApp.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: System.Runtime.InteropServices.SEHException
Stapel:
   bei SP.Forms.AutoCompleteSelectionBase.OnEnter(System.EventArgs)
   bei System.Windows.Forms.Control.NotifyEnter()
   bei System.Windows.Forms.ContainerControl.UpdateFocusedControl()
# 4 #
Anwendung: WpfApp.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: System.Runtime.InteropServices.SEHException
Stapel:
   bei System.IO.UnmanagedMemoryStream.ReadByte()
   bei System.IO.BinaryReader.ReadByte()
   bei System.IO.BinaryReader.Read7BitEncodedInt()
   bei System.Resources.ResourceReader._LoadObjectV2(Int32, System.Resources.ResourceTypeCode ByRef)
   bei System.Resources.ResourceReader.LoadObjectV2(Int32, System.Resources.ResourceTypeCode ByRef)
   bei System.Resources.ResourceReader.LoadObject(Int32, System.Resources.ResourceTypeCode ByRef)
   bei System.Resources.RuntimeResourceSet.GetObject(System.String, Boolean, Boolean)
   bei System.Resources.RuntimeResourceSet.GetObject(System.String, Boolean)
   bei System.Resources.ResourceManager.GetObject(System.String, System.Globalization.CultureInfo, Boolean)
   bei System.Resources.ResourceManager.GetStream(System.String, System.Globalization.CultureInfo)
# 5 #
Anwendung: WpfApp.exe
Frameworkversion: v4.0.30319
Beschreibung: Der Prozess wurde aufgrund einer unbehandelten Ausnahme beendet.
Ausnahmeinformationen: System.Runtime.InteropServices.SEHException
Stapel:
   bei System.Reflection.RuntimeParameterInfo.get_Name()
   bei System.Diagnostics.StackTrace.ToString(TraceFormat)
   bei System.Environment.GetStackTrace(System.Exception, Boolean)
   bei System.Exception.GetStackTrace(Boolean)
   bei System.Exception.ToString(Boolean, Boolean)
   bei System.Exception.ToString(Boolean, Boolean)
   bei System.Exception.ToString(Boolean, Boolean)
   bei System.Exception.ToString()
# 6 #
Name der fehlerhaften Anwendung: XYZ.exe, Version: 2015.0.496.5054, Zeitstempel: 0x54ea834f
Name des fehlerhaften Moduls: KERNELBASE.dll, Version: 6.3.9600.17278, Zeitstempel: 0x53eeb460
Ausnahmecode: 0xe0434352
Fehleroffset: 0x00012f71
ID des fehlerhaften Prozesses: 0xa68
Startzeit der fehlerhaften Anwendung: 0x01d0559cb7ec4ed6
Pfad der fehlerhaften Anwendung: \\share\XYZ.exe
Pfad des fehlerhaften Moduls: C:\WINDOWS\SYSTEM32\KERNELBASE.dll
Berichtskennung: 010514d0-c190-11e4-bf04-78542e186754
Vollständiger Name des fehlerhaften Pakets:
Anwendungs-ID, die relativ zum fehlerhaften Paket ist:
# 7 #
Name der fehlerhaften Anwendung: XYZ.exe, Version: 2015.0.496.5054, Zeitstempel: 0x54ea7a6e
Name des fehlerhaften Moduls: ntdll.dll, Version: 6.3.9600.17630, Zeitstempel: 0x54b0d74f
Ausnahmecode: 0xc0000006
Fehleroffset: 0x0006db27
ID des fehlerhaften Prozesses: 0x18dc
Startzeit der fehlerhaften Anwendung: 0x01d0559cb08529c3
Pfad der fehlerhaften Anwendung: \\share\xyz.exe
Pfad des fehlerhaften Moduls: C:\WINDOWS\SYSTEM32\ntdll.dll
Berichtskennung: ef389186-c18f-11e4-bf04-78542e186754
Vollständiger Name des fehlerhaften Pakets:
Anwendungs-ID, die relativ zum fehlerhaften Paket ist:

Hi,
>>The applications run fine when launching from a FQDN share
It sounds like a DNS suffix issue. When this issue occurs, please try to ping share on the client, then check if the corresponding IP address is correct. If the IP address is wrong, please adjust your settings of DNS to make sure that the client can resolve
the share correctly.
If it's very hard to change the settings of the DNS for some reason, as a work around, we can add the entry into the clients' hosts file.
Best Regards.
Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Any way to tap into USB internally in a Mac Pro?

I have a 2008 quad-core (not a 8-core, mine's a "CTO") Mac-Pro. An outfit called Koutech Systems makes 8-port RS-232 PCI-e cards. Problem is, it needs to tap into a USB header-pin connector on the mother board, or plug into an internal USB port. I think it grabs power from the PCI-e bus, and converts the usb serial into RS-232 serial (I know the card shows up as a usb device in system profiler). Is there a way to gain access, internally, to a USB port, and if so, how?

Kinda hate to have to buy a 5-port USB PCI-e card when I already have numerous unused USB ports on the outside. There is a (not easily accessible - ya' gotta pull the front panel fans to get to it) pin-header connector on the motherboard that is labeled "FP-USB" so I'm guessing that means "front panel USB" -- it goes to a small PCB that has the front panel USB and firewire connectors on it -- I wonder if I could hijack that, at the expense of rendering the two(?) (not sitting in front of that computer at the moment) front panel USBs inoperative, but not affecting anything else on that PCB (i.e., the 1394 FW ports or the audio port)?

Windows FTP access into 2nd internal HD

Similar Messages

Maybe you are looking for