Windows FTP download to ASA, default password = root

I was able to set up a Windows 2003 server as an FTP server, and was able to transfer files. However, I had to view the Windows FTP log to determine the default password was root@DallasRouter. I can not find any documentation on this, and it's the first time I've seen "root" in the Cisco world. Can anyone point me to a web site or help me understand this?

Jimmyc,
On the ASA you can include the any userID as part of the ftp URL like this one below
KUSANKAR-ASA-5505# copy ftp://kusankar:[email protected]/asa.txt flash:asa.tx t
Address or name of remote host [192.168.2.2]?
Source username [kusankar]?
Source password [kusankar]?
Source filename [asa.txt]?
Destination filename [asa.txt]?
Accessing ftp://kusankar:[email protected]/asa.txt...!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!
Writing file disk0:/asa.txt...
56097 bytes copied in 0.140 secs
KUSANKAR-ASA-5505#
http://www.cisco.com/en/US/docs/security/asa/asa84/command/reference/c4.html#wp2171368
-Kureli

Similar Messages

What is the default password for Windows server r2?

What is the default password for the evaluation copy of Windows 2012 R2?
You can't log on and it wants to change the password , yet nothing works .
This is the non gui version. About to format it and install the GUI version to see if it doesn't have this bug.
Thanks

I downloaded from MS on Friday.
It refuses to let me set a password or log on. Tomorrow I will blow it off and try the gui version to see if it's any better.

Connect to SYSDBA from inside SQLplus? Default password?

Ok, I could call SQLplus with the SYSDBA user as
sqlplus / as sysdba
but assume I am in a SQLplus session as SYSTEM user and I just want to quick switch to SYSDBA
through a "conn" command and execute some instructions?
How can I do this? How is the default password of SYSDBA (and SYSOPER) ?
the following does not work:
SQL>conn SYSDBA/sysdba
How else can I connect?
Peter

user559463 wrote:
Ok, I could call SQLplus with the SYSDBA user as
sqlplus / as sysdba
but assume I am in a SQLplus session as SYSTEM user and I just want to quick switch to SYSDBA
through a "conn" command and execute some instructions?
How can I do this? How is the default password of SYSDBA (and SYSOPER) ?
the following does not work:
SQL>conn SYSDBA/sysdba
How else can I connect?
PeterPeter,
Well first of all, there is no user called SYSDBA, Its a role not a user. Here is the link which tells what this role contains and another SysOPER also,
http://download.oracle.com/docs/cd/B19306_01/server.102/b14231/dba.htm#sthref137
Now the comamnd that you have given, connect sysdba/sysdba, is wrong fron start to finish as there is no user like this. One may think that the option to quickly switch can be setting the current schema to sys but that also doesn't work for SYS user,
SQL> conn system/oracle
Connected.
SQL> select * from V$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Prod
PL/SQL Release 10.2.0.1.0 - Production
CORE    10.2.0.1.0      Production
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production
SQL> alter session set current_schema=scott;
Session altered.
SQL> select * from salgrade;
     GRADE      LOSAL      HISAL
         1        700       1200
         2       1201       1400
         3       1401       2000
         4       2001       3000
         5       3001       9999
SQL> alter session set current_schema=sys;
Session altered.
SQL> select * from x$bh;
select * from x$bh
ERROR at line 1:
ORA-00942: table or view does not exist
SQL>So the only option is to actually log in as Sys user.
HTH
Aman....

Firefox will not download HTML downloads, only FTP downloads.

I tried to download Eclipse Juno on their website today, but when I click the downloads, it goes to the thanks for download page and it does not load the download mirror (no dialog about opening or saving file).
However, when I try and FTP download, it gives me the dialog and downloads correctly. Why is this happening?
http://www.eclipse.org/downloads/download.php?file=/eclipse/downloads/drops4/R-4.2.2-201302041200/eclipse-SDK-4.2.2-win32-x86_64.zip&mirror_id=546
Can't download. (HTML)
http://www.eclipse.org/downloads/download.php?file=/eclipse/downloads/drops4/R-4.2.2-201302041200/eclipse-SDK-4.2.2-win32-x86_64.zip&mirror_id=514
Can download. (FTP)

Make sure that your security software isn't blocking the file.
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Try to boot the computer in Windows Safe mode with network support (press F8 on the boot screen) as a test to see if that helps.
It is possible that anti-virus software is corrupting downloaded files or is otherwise interfering with downloading files.<br />
Try to disable the real-time (live) scanning of files in your anti-virus software temporarily to see if that makes downloading work.
See:
*http://kb.mozillazine.org/Unable_to_save_or_download_files

Default password for SID adm

The subject says it all - I am new to MaxDB, and did not install the application.
We are trying to update some tables, and get permission errors.
I have the SUPERDBA user, but that user does not have permissions on the <SID>ADM tables.
Is there a default password for the <SID>ADM database user?
I am probably missing something very easy here.

SAP customer - yes - I am reviewing the documentation - it leaves a lot to be desired
Here is the output you requested:
dbmcli on GRD>sql_execute select * from users
OK
END
'CONTROL';'';'CONTROL';'ADMIN';'MULTIPLE';(null);(null);(null);'DEFAULT';'20090218';'00160032';'20090218';'00160032';'20090218';'00160032';'GRD';'grc-app-dev01';0;'NO';(null)
'SUPERDBA';'';'SUPERDBA';'SYSDBA';'MULTIPLE';(null);(null);(null);'DEFAULT';'20090218';'00160032';'20090218';'00160033';'20090218';'00160032';'GRD';'grc-app-dev01';10;'NO';(null)
'SUPERDBA';'';'SAPGRD';'DBA';'MULTIPLE';(null);(null);(null);'UNICODE';'20090218';'00160045';'20090218';'00160045';'20090218';'00160045';'GRD';'grc-app-dev01';28;'NO';(null)
'SUPERDBA';'';'SAPGRDDB';'DBA';'MULTIPLE';(null);(null);(null);'UNICODE';'20090218';'00160052';'20090218';'00160052';'20090218';'00160052';'GRD';'grc-app-dev01';29;'NO';(null)
I'm not 100% sure what you are looking for on the second query, all I could get to work was this -
select * from tables
which gives a lot of output, here is some:
'SUPERDBA';'SUPERDBA';'ROOTS';'SEL+';'SYSTEM';'VIEW';'20090218';'00160033';(null);(null);(null);(null);(null);(null);(null);;x'00000000000000B1';(null);(null);(null);(null)
'SUPERDBA';'SUPERDBA';'RUNNING_COMMANDS';'SEL+';'SYSTEM';'VIEW';'20090218';'00160033';(null);(null);(null);(null);(null);(null);(null);;x'00000000000000B2';(null);(null);(null);(null)
'SUPERDBA';'SUPERDBA';'RUNNING_PARSEIDS';'SEL+';'SYSTEM';'VIEW';'20090218';'00160033';(null);(null);(null);(null);(null);(null);(null);;x'00000000000000B3';(null);(null);(null);(null)
'SUPERDBA';'SUPERDBA';'SERVERDBSTATISTICS';'SEL+';'SYSTEM';'VIEW';'20090218';'00160033';(null);(null);(null);(null);(null);(null);(null);;x'00000000000000A1';(null);(null);(null);(null)

How to change the Default Password on AP1131AG

Hi all :
I tried to change the default password Cisco to other by command line but the password cannot work out.
The command line I used are as below :
AP#conf t
Enter configuration commands, one per line. End with CNTL/Z.
AP(config)#enable pass
AP(config)#enable password 4dMINO123 ?
LINE    <cr>
AP(config)#enable password 4dMINO123
AP(config)#exit
AP#wr
*Mar 1 04:39:23.902: %SYS-5-CONFIG_I: Configured from console by console
Building configuration...
[OK]
AP#exit
This still cannot cahnge. Below I do again below commands :
AP(config)#enable secret
% Incomplete command.
AP(config)#enable secret ?
0      Specifies an UNENCRYPTED password will follow
5      Specifies an ENCRYPTED secret will follow
LINE   The UNENCRYPTED (cleartext) 'enable' secret
level Set exec level password
AP(config)#enable secret 5
% Incomplete command.
AP(config)#enable secret 5 ?
LINE The ENCRYPTED 'enable' secret string
AP(config)#enable secret 5 LINE
ERROR: The secret you entered is not a valid encrypted secret.
To enter an UNENCRYPTED secret, do not specify type 5 encryption.
When you properly enter an UNENCRYPTED secret, it will be encrypted.
AP(config)#enable secret LINE
AP(config)#exit
AP#
*Mar 1 04:40:53.021: %SYS-5-CONFIG_I: Configured from console by console
AP#
AP#exit
After that when I access with >en again as below with correct password of 4dMINO123 and it always fails as below :
Can anybody help to provide correct way of changing the default password of Cisco to another password? Many thanks!
AP con0 is now available
Press RETURN to get started.
AP>en
Password:
Password:
Password:
% Bad secrets
AP>en 0
AP>en 5
% No password set
AP>en 15
Password:
Password:
% Password: timeout expired!
Password:
% Bad secrets
AP>
AP>
AP>en
Password:
Password:
Password:
% Bad secrets
thanks and best regards,
tangsuan

Hi, I have even the worst problem,
that seems probably to to be never asked on Internet. After quick learning how to reset this creapy device, I can't get by no means the enable password in default config for this box, having read everywhere from Cisco guide through community pages to Google pages.. NOWHERE.
Question is : what else except Cisco, cisco, root, password... can solve this stupid issue?!? I expect some guru from responsible AP BU to answer this with definite answer, or someone from Cisco having mercy with me to contact such guy(s).
Here is my desperate situation :
Nothing from this page helped :
http://www.cisco.com/en/US/partner/products/hw/wireless/ps430/products_password_recovery09186a00800949d0.shtml#reset_ap_newer
Situation after hard reset:
Xmodem file system is available.
flashfs[0]: 26 files, 8 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 15998976
flashfs[0]: Bytes used: 6879232
flashfs[0]: Bytes available: 9119744
flashfs[0]: flashfs fsck took 43 seconds.
Base ethernet MAC Address: 00:22:55:9f:fc:a0
Initializing ethernet port 0...
Reset ethernet port 0...
Reset done!
ethernet link up, 100 mbps, full-duplex
Ethernet port 0 initialized: link is up
button pressed for 1 seconds
process_config_recovery: set IP address and config to default 10.0.0.1
Loading "flash:/c1130-rcvk9w8-mx/c1130-rcvk9w8-mx"...#########################################################################################################################################################################
File "flash:/c1130-rcvk9w8-mx/c1130-rcvk9w8-mx" uncompressed and installed, entry point: 0x3000
executing...
              Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
           cisco Systems, Inc.
           170 West Tasman Drive
           San Jose, California 95134-1706
Cisco IOS Software, C1130 Software (C1130-RCVK9W8-M), Version 12.3(11)JX1, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2006 by Cisco Systems, Inc.
Compiled Mon 17-Jul-06 11:38 by alnguyen
Image text-base: 0x00003000, data-base: 0x0035E440
Initializing flashfs...
flashfs[1]: 26 files, 8 directories
flashfs[1]: 0 orphaned files, 0 orphaned directories
flashfs[1]: Total bytes: 15998976
flashfs[1]: Bytes used: 6879232
flashfs[1]: Bytes available: 9119744
flashfs[1]: flashfs fsck took 6 seconds.
flashfs[1]: Initialization complete....done Initializing flashfs.
cisco AIR-LAP1131AG-E-K9   (PowerPCElvis) processor (revision A0) with 24566K/8192K bytes of memory.
Processor board ID FCZ1238Q0HK
PowerPCElvis CPU at 262Mhz, revision number 0x0950
Last reset from power-on
LWAPP image version 3.0.51.0
1 FastEthernet interface
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:22:55:9F:FC:A0
Part Number                          : 73-8962-14
PCA Assembly Number                  : 800-24818-13
PCA Revision Number                  : A0
PCB Serial Number                    : FOC12354426
Top Assembly Part Number             : 800-29144-03
Top Assembly Serial Number           : FCZ1238Q0HK
Top Revision Number                  : A0
Product/Model Number                 : AIR-LAP1131AG-E-K9
Press RETURN to get started!
*Mar 1 00:00:08.354: %CDP_PD-4-POWER_OK: Full power - AC_ADAPDOWN: Line protocol on Interface FastEthernet0, changed state to up
Press>en
Password:
Password:
Password:
*Mar 1 00:00:27.393: %LWAPP-5-CHANGED: LWAPP changed state to DISCOVERY
% Bad secrets
Press>en
Password:
Password:
Password:
% Bad secrets
Press>
*Mar 1 00:00:36.530: %DHCP-6-ADDRESS_ASSIGN: Interface FastEthernet0 assigned DHCP address 192.168.1.2, mask 255.255.255.0, hostname Press
Press>en
Password:
Password:
Press>sho ver
Cisco IOS Software, C1130 Software (C1130-RCVK9W8-M), Version 12.3(11)JX1, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2006 by Cisco Systems, Inc.
Compiled Mon 17-Jul-06 11:38 by alnguyen
ROM: Bootstrap program is C1130 boot loader
BOOTLDR: C1130 Boot Loader (C1130-BOOT-M) Version 12.3(8)JEA, RELEASE SOFTWARE (fc2)
Press uptime is 17 minutes
System returned to ROM by power-on
System image file is "flash:/c1130-rcvk9w8-mx/c1130-rcvk9w8-mx"
cisco AIR-LAP1131AG-E-K9   (PowerPCElvis) processor (revision A0) with 24566K/8192K bytes of memory.
Processor board ID FCZ1238Q0HK
PowerPCElvis CPU at 262Mhz, revision number 0x0950
Last reset from power-on
LWAPP image version 3.0.51.0
1 FastEthernet interface
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:22:55:9F:FC:A0
Part Number                          : 73-8962-14
PCA Assembly Number                  : 800-24818-13
PCA Revision Number                  : A0
PCB Serial Number                    : FOC12354426
Top Assembly Part Number             : 800-29144-03
Top Assembly Serial Number           : FCZ1238Q0HK
Top Revision Number                  : A0
Product/Model Number                 : AIR-LAP1131AG-E-K9
Configuration register is 0xF
Press>

Cisco ASA 5505 Password Problem

I recently ran into a telnet, console, and enable password issue that was unexpected and I am hoping someone can explain what happened.
I had two working Cisco ASA 5505's that were two end-points of a Site-to-Site VPN. I had used the ASDM file management tools to copy disk0 startup-config.cfg to a file named old-startup-config.cfg on disk0, on both ASA systems, and I wanted those two files to function as good working startup-config backups that I could return to, right there on the firewall, if I had to. I also used the ASDM file management tools to make configuration "zip" backups to my local computer. I am aware that the actual startup-config file is some type of hidden file.
I had made some changes to both Cisco ASA 5505s, but no password changes, and everything was working great and was reloading great. Then, I suddenly found that I needed to revert back to the old working configurations that I had backed up previously. I used the ASDM file management tools to copy old-startup-config.cfg back to startup-config.cfg on disk0 on both machines. I think I may have also issued the CLI command copy old-startup-config.cfg startup-config. I asked both systems to reload without writing the running-config's to memory.
When the systems reloaded, the console, telnet, and enable passwords were no longer recognized on the CLI and Web interface. The interfaces loaded normally, but the passwords didn't work and the cisco default passwords didn't work either. I had to go to each unit's physical location and perform a power cycle and console password recovery.
I am not sure why that happened. Is the startup-config.cfg file on disk0 an altered version of the actual startup-config configuration with missing or encrypted password credentials? I would have never guessed in a million years that my procedure would have knocked out the enable password.
Instead of copy startup-config.cfg old-startup-config.cfg, should I have issued the command copy startup-config old-startup-config.cfg to make a local backup of a working configuration?
I have one more semi-related question. If one uses ASDM file management to create a zip backup of a startup-config or running-config and then proceeds to restore a running-config, when does the restored running-config take effect?

If password recovery is disabled then you are locked out hard. You have to sacrifice the config to "re-admin" the appliance. Sorry for the bad news but that's the way it is by design. If there was a "back door" it would hardly be a security appliance would it?

Set default password for all users including csv file

I would like to set the default password for all users
including the ones imported in the csv file?
Also now the default passwrd in set to the email address. How
do i change that setting to the "login" setting in the csv file so
those users can loin with that password?
Kinda the same question but do yuo get the idea?
Thank you,
Chip

You could download and install RCDefaultApp 2.1 for all users: check the Read Me and then test it on something to see if it accomplishes what you want.
http://www.rubicode.com/Software/RCDefaultApp/

Connecting Via Windows FTP Service

I recently moved several sites that used Contribute to a new
webserver (Windows 2003 running IIS 6). The server uses Windows FTP
Service.
To create a FTP account I created a Windows Account and then
a Virtual FTP directory with the same name as the windows user and
pointed that virtual directory at the root of the site I want to
update with contribute. I gave the Windows account full control on
the site root folder. I can FTP connect via Internet Explorer and
the command line.
When connecting via contribute I get an error saying
The directory you specified does not exist. Please make sure you
entered the directory name correctly. On some servers,
file/directory names are case sensitive"
Contribute seems to be trying to change directory to a folder
with the same name as the FTP virtual directory, rather than to the
folder that the virtual directory points at.
here's the error log from contribute
Date: 11/27/2006
LocalTime: 14:07
Host: 80.76.207.49
Port:
LoginID: myFTPUserName
Path: /myFTPUserName/
Passive Enabled: false
ProxyHost: NoneContribute Alternate Rename: no
Contribute Optimized: yes
======================== Test Results
==========================
NOTE: Microsoft FTP Service has been detected. For more
information on FTP server compatibility issues, please see
http://www.macromedia.com/support/contribute/ts/documents/ftp_info.htm
Login: SUCCESS!
Changing Directory To: /myFTPUserName/ Error. The directory
you specified does not exist. Please make sure you entered the
directory name correctly. On some servers, file/directory names are
case sensitive.
----------------------- FTP log from the last operation
> CWD /ftp
< 550 /ftp: The system cannot find the file specified.
> CWD /ftp/
< 550 /ftp: The system cannot find the file specified.
> CWD /
< 250 CWD command successful.
> RNFR ftp
< 550 ftp: The system cannot find the file specified.
> MDTM ftp
< 550 ftp: The system cannot find the file specified.

Hi!
I think the windows service is using a different systemaccount that your other application, and that account does not have rights to read the sbo-common database.
You can change the account used by your service on the service definition or in the SERVICES application of Windows.
Sir Harold

Airport Extreme "default password" error

After resetting Extreme, I cannot rectify the amber light error for "default password in use".
The password is not set to the default.
Have tried various new passwords, but after updating each time nothing changes.
All internet and wireless connections apper to be working 100% - it's just annoying the **** out of me..........

Open AirPort Utility 6.1, click on the AirPort Extreme icon, and click Edit in the window that appears
Click the Base Station tab at the top of the window
Edit out / backspace the Base Station Password and enter a new password. Write that down.
Do the same to Verify Password
Click Update at the lower right of the window and allow 25-30 seconds for the AirPort Extreme to restart
You should have a green light, unless you still have other default settings that need to be changed.

How to set my windows to open at their default size every time.

Ok, when I connect to my computer with splash top from my ipad my windows resize. Is there a way to set my windows to just open at default size no matter what. So every time I open a program the window is at default factory settings size.
Thank you,
Byggy687

> How can I create a username and password pop up window?
Use DW's OpenBrowser Window behavior.
> Is that database related?
The pop up window is not, but the processing of the login is
likely to be.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Inokat" <[email protected]> wrote in
message
news:efd2l7$nns$[email protected]..
> :), Man there are some excited people out there.
> I got the picture after the first answer. Thanks David.
>
> I have another Q.
> How can I create a username and password pop up window?
Is that database
> related?
>
> By the way, for those excited people out there, ?CHILL?
>
>
>

Automating ftp download with powershell

I need to setup a scheduled task that is going to download files from an ftp location (or just run it manually)
I have the following for a ps1
$File = "c:\store\somefilename.zip"
$ftp = "ftp://username:[email protected]/pub/outbound/somefilename.zip"
"ftp url: $ftp"
$webclient = New-Object System.Net.WebClient
$uri = New-Object System.Uri($ftp)
"Downloading $File..."
$webclient.DownloadFile($uri, $File)
I'm guessing I can set $File to *.* but I don't want to download the same files everytime. I am hoping the users will be moving the files once downloaded but who can quarentee that. What for loop can I add to achieve this?
I found the following but not sure how I would alter my original to add this in.
foreach($listOut in $listIn)
$a = ((Get-Date) - [datetime]::ParseExact($listOut.ModifiedDate, "MMM dd HH:mm", $null)).days
if ($a -le 0)
Get-FTPItem -path $dirBank\$($listOut.Name) -LocalPath d:\backup\test\$($listOut.Name)
Thanks in advance for the help.

Hi,I have written a PowerShell module which handles things like uploading/download of files to websites and ftp servers.
The code is available at: https://github.com/kjacobsen/WebFunctions
Import-Module E:\WebFunctions\Web-Actions.psm1
Get-WebFile ftp://ftp.uni-rostock.de/pub/systems/windows/WinNT/Sys/SysInternals/Filemon.zip
The code above will download the file to the current folder. The CMDlets support a variety of features including Proxy connections and authentication.
Kieran Jacobsen @kjacobsen http://aperturescience.su

Automate FTP download from a website

Hello
Does anyone know how to automate a ftp download from a site using a login and password? I am using the SAP business objects XI 3.2 environment.
Any help would be greatly appreciated !
Regards
Juan

i have an idea, i didnt try it but it looks cool
why you dont map this ftp folder to a logical drive, and use this drive into data service?
find out how you can map ftp folder to logical drive here
http://www.astahost.com/info.php/Map-Ftp-Server-Drive_t7292.html
good luck
Amr

What is a default password in Lion terminal

What is a default password in the Mac Lion Terminal? I never setup any password on my MacBook Air. Everytime I used command line in TERMINAL (such as sudo....) they always ask for Password.
Thanks

Note that after creating an admin password, you can still arrange things so you do not need it to log in at startup.
To set that up, go to System Preferences > Users & Groups and then click the Login Options item at the bottom of the pane on the left side. In the new screen, select your account name for the item "Automatic login".
Note - you'll need to unlock that control pane in order to make changes, To do that, click the lock icon in the bottom left of that window.

I just downloaded ilife every things working fine except, when i try to open iPhoto it said ''You can't open the application iPhoto because it may be damaged or incomplete. i tried to re-download it but my password didn't work for some reason. HELPPPP!!!

i just downloaded ilife every things working fine except, when i try to open iPhoto it said ''You can't open the application iPhoto because it may be damaged or incomplete. i tried to re-download it but my password didn't work for some reason. HELPPPP!!!

Make a temporary, backup copy (if you don't already have a backup copy) of the library and apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Select the options identified in the screenshot.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
Happy New Year

Windows FTP download to ASA, default password = root

Similar Messages

Maybe you are looking for