Windows has detected a registry/configuration error

I haven't used my Protege 3110CT in many years. When I start to boot up I get the message:
Warning: Windows has detected a registry/configuration error. Use SCANREG to correct this error.
However, I cannot get into DOS to do a SCANREG nor do I know any other method.
I do not have any of the startup disks.
My machine has Windows ME on it.
I do have an external floppy drive and CD drive.
Any assistance is appreciated.
Bob

Portege 3110CT
You can download a bootable DOS floppy here.
http://www.bootdisk.com/bootdisk.htm
If you can locate a download of Scanreg.exe, then boot to DOS and run scanreg /restore to
go back to a previous known working copy of your Windows Me registry.
Maybe this one works (I don't know).
http://www.mesich.com/download/SCANREG.EXE
-Jerry

Similar Messages

Window has detected and IPS Address Conflict

     To Whom this my concern, I keep getting this message, which, I had mention in the subject line. I have reset my wifi box and the box, that Charter gave me quit a few times. But, this message keeps on coming up, for some odd reason or another.
     I was just wondering. I had a Hp Lap Top 2000, that some one had stoolen off me, quit a few months, ago. I reported it to the police station and HP and they said that they could not do anything about it. Because, I absolutely lost my serial number, that I had written down.
    But, I used the same email addresses and Passwords on both computes. So, I was just a wondering if the person could be useing the lap top, that I had gotten stoolen from me and this is the way, this is why this message keeps popping up on my computer.
    Oh, I even called up Charter and mention it to them and they absolutely could not figure out what is going on either. So, I just thought, that I would text it on the internet. To see if any one absolutely knew what was going on.
Well, if you want to get in touch with me. My email address it [Personal Information Removed] or
[Personal Information Removed].
If you could help me out. I would appreciate it and awful lots.
                                                                                                                                                    Yours Sincerely,
                                                                                                                                                     Mr. Rockie A. Bates

Hi @Rockiebates1949 ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your Window has detected and IPS Address Conflict on your Home Network. This error message indicates that another computer on the network is using the same IP address that your computer is using. Each computer on a network must have a unique IP address. To fix this problem, run the Network troubleshooter.
I hope this helps.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Itunes keeps closing as soon as i open it and states 'windows has detected a problem' HELP!!!!

Help!! Itunes keeps closing straight away and message states 'windows has detected a problem' HELP ASAP PLEASE!!!!

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If you've already tried a complete uninstall and reinstall try opening iTunes in safe mode (hold down CTRL+SHIFT as you start iTunes) then going to Edit > Preferences > Store and turning off Show iTunes in the Cloud purchases. You may find iTunes will now start normally.
tt2

Windows has recovered from a serious error

Hi all, I've been reading a lot about overclocking and I finally started today. I have set my FSB to 233, and I have been trying to find the lowest voltage I can run it at. 1.6 works fine but I tried going lower. This resulted in a spontaneous reboot. After windows booted back up when I increased the voltage, the windows error reporting dialog came up and said "windows has recovered from a serious error..." So I send the report... and internet explorer opens with a little info. It says the crash was due to a problem with a driver but does not mention a specific driver. does this osund familiar to anyone? are there any drivers i should investigate or replace? thanks a lot for your help!

often with overclocking you will see 'file not found' BSODs on startup. It is reasonable to assume that our overclock may have upset a driver, driver component or driver associated file.
Don't sweat it, as long as your not on that vCore now there should be no damage done to Windows.
Have to admit I've had "Windows has...serious error" before following a vCore increasment on an AMD board.

Satellite A500-1C0 - Windows has detected a problem with HDD

Good day,
Notebook shows me that Windows has detected a problem with HDD. The notebook is slow and the chops. And when you turn it shows me Smart Failure predicted on hard disk 1. Toshiba MK 5055GSX - (S2). Can you help me? (Im CZ)
http://img684.imageshack.us/img684/8434/smartm.jpg

Hi Konyga,
If you already get a warning about internal HDD before Windows starts I would recommend exchanging it and backup all data as fast as possible.
Is your notebook still under warranty?
If yes you can get a new HDD from an authorized service provider. This would be for free because its covered by warranty. Everything what you have to do is contacting an ASP.
http://eu.computers.toshiba-europe.com > Support & Downloads > Find an ASP

When sync my iphone I get "Windows has detected as IP address conflict"

Computer (win7 64bt) is fine. Same with iphone 5s, IOS 8. But when I plug in iphone to sync with PC I recieved the message :"Windows has detected as IP address conflict."
(This does not happen with my ipad - phone only) When I close the window and everything seems to be working fine...but it pops up regularly. Any thoughts?
Thanks-
MR

These forums are dedicated to Residential products and services offered by Verizon.
For help on Verizon Wireless issues, please post your topic on the Verizon Wireless community.
Thank you.

Windows has detected an IP address conflitct

Can someone please tell me how to correct a message that comes up Windows has detected an IP address conflict?

Are you using your VZW phone as a hotspot? I notice this on my Windows PC when I use my iPhone as a hotspot but not on my MacBook Pro. I usually just ignore it because it doesn't affect anything

" LogicPro has detected a possible conflict error "

Hi All,
I know this has been flagged before as a known issue but I cant see a specific answer based on my set up.
Error message :
" LogicPro has detected a possible conflict between one or more third party midi or audio drivers "
Background :
I have two macs, a macbook pro and a mac pro. On my macbook pro ( older system ) I have both Logic 7 & Logic Studio, On my macpro I only have Logic Studio.
I had a completed track on Logic 7, when trying to open in logic 8 I got the mentioned error, But when I copied the track to my new mac pro system i got the same error again, the mac pro is a recent buy and a fresh install.
Can some one please advise on how to resolve this issue, do i need to remove all automation data from the original copy within logic 7 then transfer across ?
Really keen to sort out as planning to wipe my macbook pro and re-start from scratch when snow-leopard is released
Hope someone can advise
Cheers
Andy

I guess I'd search for all drivers, and see what comes up. Delete al that aren't Core audio, and make sure I have the current M-Audio driver for your device and re-install it. Just a guess, really...

Windows has detected file system corruption on local disk. How can i solve this problem?

Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Windows\system32>chkdsk
The type of the file system is NTFS.
WARNING! F parameter not specified.
Running CHKDSK in read-only mode.
CHKDSK is verifying files (stage 1 of 3)...
4 percent complete. (148991 of 343808 file records processed)
Attribute record (128, "") from file record segment 154351
is corrupt.
4 percent complete. (157441 of 343808 file records processed)
Attribute record (128, "") from file record segment 165044
is corrupt.
Attribute record (128, "") from file record segment 170460
is corrupt.
5 percent complete. (171904 of 343808 file records processed)
Attribute record (128, "") from file record segment 176325
is corrupt.
Attribute record (128, "") from file record segment 176329
is corrupt.
Attribute record (128, "") from file record segment 176849
is corrupt.
343808 file records processed.
File verification completed.
3390 large file records processed.
Errors found. CHKDSK cannot continue in read-only mode.
C:\Windows\system32>

well actually HP notebooks bioses have some diagnostics an user can run: HDD test, memory check, battery check thats all.
Still U can use HD Tune if U download it - freeware. But Hard Drive test U can do in Bios also works very well. I suggest this one cause when it detect something HP wont be oposing to U'rs repair request.
click on Kudos if i helped U

Windows has detected that your performance is low.

Hello,
I keep getting messages about my desktop being slow and if I would like to disable windows Aero.
Well I don't want to disable it, I just want the error to dissapear. I don't believe my PC is actually slow, since it's not.
Is there any way to completely remove this error message (disabling it in control panel does NOT work.)
I don't want a solution such as disabling/enabling desktop composition since that's not a solution, it's a work-around.
My specs;
i7 4770k 3,5 GHz (OC'd to 4,0)
MSI GTX GeForce 770 4GB
Kingston HyperX 16 GB 2400 MHz (4X 4GB) (Yes I know my processor doesn't support 2400 MHz...)
Samsung EVO 250GB
Gigabyte GA-Z87X-D3H motherboard
I've read solutions as; Get more memory on your GPU, well it has 4GB, should be enough.
Also 'upgrading to latest drivers' is commonly heard, which I also have. So my request to microsoft is, please completely remove the error (or allow the windows users to disable it.).

Go to the Start Menu and type Action Center on the Search box
Start it (it should be the top entry, under the "Control Panel" group)
On the left sidebar, click Change
Action Center settings
Untick the Windows
Troubleshooting checkbox, under "Maintenance Messages".
Click the Ok button
and you are done.
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

Windows has detected a hard disk problem

I just got a warning from windows that I have a hard disk problem then Toshiba Utility notifies me with the following:
Disk0
Your HDD has the SMART Predict Failure function which monitors the HDD operating status. Your HDD is experiencing a problem and SMART monitoring software predicts that the HDD will fail. Toshiba strongly recommends you create a back-up for your HDD data. Then contact an authorized service provider in order to check your drive and purchase a new replacement drive if necessary.
I have never had problems with a hard disk, all I know is that I should get a backup drive as soon as possible. After I back up my files and everything....what is the next step? Take it to a repair man to fix, get a new harddrive, contact about warranty, what exactly do you do with this kind of situation? Is it fixable?
System Details:
Toshiba Satellite L675D-S7052
Windows 7 Home Premium 64 Bit

If you're computer is under warranty, you should contact customer support at (800) 457-7777. The hard drive will need to be replaced.
- Peter

ITunes has detected an audio configuration problem ????

I was getting the above error (see subject) when starting iTunes but iTunes still started after the error-message.
Then I followed these directions (http://docs.info.apple.com/article.html?artnum=304424) and now iTunes refuses to start at all !!!!!
What's going on and how do I solve this without losing my iPod music library and settings ??
PLEASE HELP!!
/B

I have the same problem and I know that it is due to my PCI Audio driver not being compatible with WIndows 8.1.
iTunes isn't the only program that can't direct sound to the built-in speakers anymore. The obvious solution would be to update the drivers, but unfortunately Dell does not provide an updated driver for my model, so I am stuck with that.
However, saying that, only my laptop speakers are affected by this. I can use sound fine on applications where I can choose the output device and direct sound to the head phones, but for some reason iTunes does not let you choose the audio device manually.
To listen to music I imported the iTunes Library in Windows Media Player and changed the audio output using the following instructions: http://windows.microsoft.com/en-us/windows7/c00d11ba
However, I would also like to rent movie's from iTunes,
Would be great if iTunes would let you choose the output device, too, like most other applications using sound from Skype to Windows Media Player,...

ITunes has detected a problem with my audio configuration...

When I downloaded the new update, iTunes 7.3, I am unable to open it or Quicktime. iTunes says it has a problem with my audio configuration, and Quicktime says "This application has requested the Runtime to terminate is an unusual way." What do I do to solve this?

The problem with your QuickTime is most likely causing the iTunes problem. (iTunes uses QuickTime for audio and video playback.)
The following troubleshooting document may be of some assistance:
iTunes 7 for Windows: iTunes has detected an audio configuration problem

Itunes has detected a problem with your audio configuration.audio/video pla

yback may not work properly. thats the message i'm getting who ,why ,what ,where,when. Help the stores took me cash and i cant play tracks grrrr

Have you had a chance to look at this troubleshooting page? It may be of some help: iTunes 7 for Windows: iTunes has detected an audio configuration problem

Audio configuration error message

after upgrading to 7.3.1, i get an error message that reads "itunes cannot run because it has detected a problem with your audio configuration". and, consequently, itunes does not open. i have reset my computer to previous settings and have attempted to remove the update. anyone else having similar problem? everything was fine yesterday...

Hi ipod777,
Since iTunes uses QuickTime to play audio/video content in iTunes, that error message most likely indicates that there's a problem with your Quicktime installation.
See this knowledge base article for troubleshooting info about this issue:
iTunes 7 for Windows: iTunes has detected an audio configuration problem
-Kylene

Windows has detected a registry/configuration error

Similar Messages

Maybe you are looking for