Windows has recovered from a serious error
Hi all, I've been reading a lot about overclocking and I finally started today. I have set my FSB to 233, and I have been trying to find the lowest voltage I can run it at. 1.6 works fine but I tried going lower. This resulted in a spontaneous reboot. After windows booted back up when I increased the voltage, the windows error reporting dialog came up and said "windows has recovered from a serious error..." So I send the report... and internet explorer opens with a little info. It says the crash was due to a problem with a driver but does not mention a specific driver. does this osund familiar to anyone? are there any drivers i should investigate or replace? thanks a lot for your help!
often with overclocking you will see 'file not found' BSODs on startup. It is reasonable to assume that our overclock may have upset a driver, driver component or driver associated file.
Don't sweat it, as long as your not on that vCore now there should be no damage done to Windows.
Have to admit I've had "Windows has...serious error" before following a vCore increasment on an AMD board.
Similar Messages
-
Why do I get "The system has recovered from a serious error" after system shut down
Every time when start/restarting the computer using the attached .vi I get a window with "The system has recovered from a serious error." Although this does not seems to have any effect on application and I am able to use the test equipment but could someone explain why this is happening?
LV 8.2
TestStand 3.5
MAX 4.1
NI DAQ Card PXI-4461
Many Thanks
Mehran
Mehran Fard
Attachments:
System Shutdown.doc 63 KBHi Fardm,
how should we answer that question when you don't attach the VI, but only a picture hidden in some proprietary file format?
Attach the VI!
You also have some Rube-Goldberg in your code:
IF not zero THEN use ErrorCode ELSE use zero
Why not just connect errorcode directly with BundleByName? You don't need the Select function here...
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome -
"system has recovered from a serious error" problem
I just built a PC on a MSI PT880-Neo (running XP professional), and most of my configurations and whatnot has been worked out. However, I'm finding that my PC will every so often, inexplicably, just freak out and go to a blue screen with lots of white technical lettering that says something about "prevent damage"--and then proceeds to restart. Horrible!
When it boots up, I get a little dialog that says my PC has "recovered from a serious error" with the following:
BCCode : 7f BCP1 : 00000000 BCP2 : 00000000 BCP3 : 00000000
BCP4 : 00000000 OSVer : 5_1_2600 SP : 1_0 Product : 256_1
What is all this? Never really seen anything like it--but it's frustrating and disconcerting.
If anyone has any suggestions on how to troubleshoot this or what this might be about, I'd really appreciate it.First off, are you using the onboard network interface, I had a weird blue screen of death, with an error code I couldn't figure out and all it said, was to call Hardware Vendor. This particular blue screen of death, did not go away until I uninstalled the drivers for the onboard nic, shut down, installed a brand new Netgear FA311 Network card. In my case it wasn't a driver issue at all, like some people here claimed it was, and I shall not name said person or persons.
If you are using the onboard nic, putting in a PCI nic(network card), could possibly make this problem you are having go away. -
System has recover from a serious error! Plz help
For some reason now whenever I boot my computer up I get a message saying it has recovered from a serious error, it used to spontaneously reboot itself but that has stopped now. any ideas on how to fix?
Hi,
See if you can boot SAFE MODE, F8 key..............
Del -
The system has recovered from a serious error ...
MOBO KT6 DELTA FISR
AMD 2500+ (aqxea 0330...)
HD ST380013AS (SATA 80GB)
2X512MB DDR400 (Kingston kvr400x64c5/512 - w942508bh-5)
DVD R/W LG gsa-4040b
COOLER k7 volcano 11+xaser edition
Graphic Card:XFX GEFORCE FX5200 AGP 8X 128mb ddr tv out (model pvt34kn)
ASUS TV Tuner Card 880/ntsc
Runing XP+SP1
I am fighting with my system above, trying undertand, isolate, what´s wrong,
let me explain:
1-The programs w/o any reason stops , reboots, and just after I got a message from XP (in a blue screen), warning that, a problem has been detected and windows has been shutdown to prevent damage to your computer, it´s an intermitent problem, happened using corecenter from msi,drive image 7,SisSoft Sandra2004.
2-Another is a little diferent, the system doesn´t reboot , but stops the program and appears a box to send report to MS Analysis Crash.
3-I tried minimum configuration soft install: XP+SP1+4IN1+AUDIO drv+Lan drv. Still happens, the techinical info tell me that there is a DEVICE DRIVER problem, even in a minimum configuration.
Please, I aprecciate, any help , I payed a lot for this system, and I am not sure if was a good idea move from (ASUS+INTEL) to (MSI+AMD). Sorry for the complain, I now here is a place to try solve problems , not to crying, sorry.Quote
Originally posted by osnavi
Both of you have similar 1 GB. memory brand.- Are you running your systems at default config. or have you changed something in Bios ? Perhaps it could be better to try first to run at default and then, when stable, begin making changes. So why not beginning clearing CMOS and see what happens ?
** Done that no difference, s oI figured it also could be a memory issue pertaining to config. I contacted both Kingston as well as MSI Support and they both gave me the same numbers to plug into Bios for the memory settings.
If that doesn't work, perhaps would be better to try a clean o.s. reinstall with only video, installing afterwords one by one other hardware.
** Did that lasst week as I was tired of screwing with the thing no change at all
HarshReality: What o.s. ?
** XP SP1
What means "Koolance PC2-901W case w/ CPU, Northbridge, Video (CHC-A09), & Hard disk Coolers"
http://www.koolance.com
Do you have "Creative 5200 5.1 Speakers" without any sound card ?
** The speakers are hooked directly into the board sound system using its ports and the S- Bracket
what max amps 3.3 5 and 12v ?
3.3v - 26A
5.0v - 52A
12.0v - 28A
3.3v + 5.0v = 260W
whats irq shares like in device manager?
** As I have wandered the thing I havent found any IRQ shares or device conflicts.
have sound and vga got one each all alone? ( This was asked to msigil. If you said you had similar problems why didn't you reply this questions ?)
msigil: whats irq shares like in device manager?
** Because I was under the impression we were here to help each other as I had no information to help him directly I saw no reason to address his particular issue or description of system settings because I seem to know just about as much of this as him or you for that matter.
Now that I have all this out of the way what you want now the color of my power plugs or to know the composition of the liquid koolant pumping through the thing..
OR can you offer me some small constructive idea as to who has made some screwed up driver for this thing that is botching my system.
I also run Linux redhat 8 and guess what.... It doesnt reboot either so it HAS to be driver and/or software related and the only thing on this is MS default and MSI
oh, I forgot... my power cords and coolant are light green glowing
that should about cover everything.... -
Blue screen error "windows has recovered from a unexpected shutdown"
Hi guys
I am using laptop & everyday it will unexpectedly shutdown and shows Blue screen error "windows has recovered from a unexpected shutdown"...Pls help me to resolve this issue.
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.48
Locale ID: 1033
Additional information about the problem:
BCCode: d1
BCP1: 00000030
BCP2: 00000002
BCP3: 00000000
BCP4: 8F2DA8A5
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1
Files that help describe the problem:
C:\Windows\Minidump\062614-23836-01.dmp
C:\Users\Venkateshwara swamy\AppData\Local\Temp\WER-74552-0.sysdata.xml
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txtIt could be some driver compatibility issues.
http://msdn.microsoft.com/en-us/library/windows/hardware/ff560244(v=vs.85).aspx
http://blogs.technet.com/b/askcore/archive/2008/11/01/how-to-debug-kernel-mode-blue-screen-crashes-for-beginners.aspx
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights. -
My system recovered from a serious error recently. During the error, Firefox crashed. Since I have restarted my system and Firefox, I cannot use any of the toolbar options such as:close, minimise and maximise. Also, when I right click, an outline of a box appears without the visible options although on some occasions they appear after 10 seconds or so. Can you advise me of what to do to cure this problem please or is it a case of using a Windows tool such as System Restore?
== This happened ==
Every time Firefox opened
== 22nd May 2010I HAVE NOW SOLVED THE PROBLEM BY RUNNING WINDOWS REGISTRY REPAIR TOOL WHICH HAS OBVIOUSLY REPAIRED CORRUPT REGISTRY FILES.
-
Image creation with MDT task sequence- "Windows has recovered from an unexpected shutdown"
I'm using MDT 2012 U1 to build and capture a Windows 7 x86 image for deployment with ConfigMgr 2012 SP1. I'm using the standard client task sequence in MDT.
The MDT task sequence consistently fails after the reboot in the "Postinstall" group. The install OS, Copy Scripts, Configure, Inject Drivers, Next Phase, and Restart Computer tasks all execute successfully, then the MDT-initiated reboot
completes successfully. There is nothing else helpful in the SMSTS.LOG, these are the last entries in the log:
Successfully complete the action (Restart Computer) with the exit win32 code 0
Sending status message
Executing in non SMS standalone mode. Ignoring send a task execution status message request
Set a global environment variable _SMSTSLastActionRetCode=0
Set a global environment variable _SMSTSLastActionSucceeded=true
Expand a string %_SMSTSMDataPath%\Logs
Deleting file without retrying
The error message on the reference computer says, "Windows has recovered from an unexpected shutdown" along with "An existing in-progress deployment was found but is not in an expected state. Would you like to ignore this in-progress
deployment and start a new one?"
I have found one post that suggested modifying customsettings.ini with HideShell=Yes, which I tried. It didn't help.
I am not sure why MDT thinks the reboot was unexpected? Has anybody run into this? What steps can I take to narrow down the problem?
Any help/suggestions are appreciated.
Thanks,
FPThanks for your reply Phil.
Setuperr.log is empty, zero bytes. Setupact.log looks good to me, it has these entries at the end:
OrchestrateUpdateImageState: Updating image state from [IMAGE_STATE_UNDEPLOYABLE] --> [Image_State_Complete]
OOBELdr.exe exiting with code [0x0]...
Process exited with exit code [0x0]
c:\windows\panther\SetupInfo succeeded.
c:\windows\panther\setupinfo.
Windeploy.exe exiting with code [0x0]
SetupSQM Started
Panther path is C:\windows\Panther
SQM not opted in
SetupSQM is finished
Our image environment was created during an MCS Engagement, so we have the solution pack and there are many variables in customsettings.ini. I will need to find out how to narrow this down but I'm not finding a log file that tells me where it's choking...
Any suggestions are appreciated.
Thanks,
FP -
Windows has recovered from an unexpected shutdown(blue screen) windows 7 ultimate 64 bit
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1033
Additional information about the problem:
BCCode: 50
BCP1: FFFFF90043C98BEC
BCP2: 0000000000000001
BCP3: FFFFF9600025033E
BCP4: 0000000000000005
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1
Files that help describe the problem:
C:\Windows\Minidump\060614-25256-01.dmp
C:\Windows\Temp\WER-31699-0.sysdata.xml
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt
please help
this happens after i add a 2gb ramYH
These were driver verified and Related to nvlddmkm.sys nVidia Display Driver. I would install the newest driver available (even if it is the same date as drivers do become corrupt)
Microsoft (R) Windows Debugger Version 6.3.9600.17029 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\Ken\Desktop\060714-31793-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
************* Symbol Path validation summary **************
Response Time (ms) Location
Deferred SRV*H:\symbols*http://msdl.microsoft.com/download/symbols
Symbol search path is: SRV*H:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (2 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7601.18113.amd64fre.win7sp1_gdr.130318-1533
Machine Name:
Kernel base = 0xfffff800`03a4c000 PsLoadedModuleList = 0xfffff800`03c8f670
Debug session time: Sat Jun 7 01:23:16.118 2014 (UTC - 4:00)
System Uptime: 0 days 0:03:21.913
Loading Kernel Symbols
Loading User Symbols
Loading unloaded module list
* Bugcheck Analysis *
Use !analyze -v to get detailed debugging information.
BugCheck C4, {f6, 17c, fffffa8005acab30, fffff8800f327295}
*** WARNING: Unable to verify timestamp for nvlddmkm.sys
*** ERROR: Module load completed but symbols could not be loaded for nvlddmkm.sys
Probably caused by : nvlddmkm.sys ( nvlddmkm+9b295 )
Followup: MachineOwner
1: kd> !analyze -v
* Bugcheck Analysis *
DRIVER_VERIFIER_DETECTED_VIOLATION (c4)
A device driver attempting to corrupt the system has been caught. This is
because the driver was specified in the registry as being suspect (by the
administrator) and the kernel has enabled substantial checking of this driver.
If the driver attempts to corrupt the system, bugchecks 0xC4, 0xC1 and 0xA will
be among the most commonly seen crashes.
Arguments:
Arg1: 00000000000000f6, Referencing user handle as KernelMode.
Arg2: 000000000000017c, Handle value being referenced.
Arg3: fffffa8005acab30, Address of the current process.
Arg4: fffff8800f327295, Address inside the driver that is performing the incorrect reference.
Debugging Details:
BUGCHECK_STR: 0xc4_f6
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: VERIFIER_ENABLED_VISTA_MINIDUMP
PROCESS_NAME: nvspcaps64.exe
CURRENT_IRQL: 0
ANALYSIS_VERSION: 6.3.9600.17029 (debuggers(dbg).140219-1702) amd64fre
LAST_CONTROL_TRANSFER: from fffff80003f4f4ec to fffff80003ac1c00
STACK_TEXT:
fffff880`09fe3a38 fffff800`03f4f4ec : 00000000`000000c4 00000000`000000f6 00000000`0000017c fffffa80`05acab30 : nt!KeBugCheckEx
fffff880`09fe3a40 fffff800`03f64bf4 : 00000000`0000017c fffffa80`05acab30 00000000`00000004 fffff800`03aec83b : nt!VerifierBugCheckIfAppropriate+0x3c
fffff880`09fe3a80 fffff800`03d1c0e0 : 00000000`00000000 fffff880`09fe3cd0 fffff880`09fe3e00 fffff880`09fe3f88 : nt!VfCheckUserHandle+0x1b4
fffff880`09fe3b60 fffff800`03d76c31 : fffff8a0`0ab06000 00000000`00000002 fffffa80`018c9f30 00000000`00000000 : nt! ?? ::NNGAKEGL::`string'+0x202ae
fffff880`09fe3c30 fffff800`03ac0e93 : 00000000`0000017c 00000000`00000240 00000000`00000000 00000000`00000003 : nt!NtSetValueKey+0xe1
fffff880`09fe3d60 fffff800`03abd450 : fffff800`03f534db fffff880`0f327295 fffff880`09fe4afc 00000000`00000000 : nt!KiSystemServiceCopyEnd+0x13
fffff880`09fe3f68 fffff800`03f534db : fffff880`0f327295 fffff880`09fe4afc 00000000`00000000 fffff800`03abd450 : nt!KiServiceLinkage
fffff880`09fe3f70 fffff880`0f327295 : 00000000`00000008 fffff880`09fe4031 00000000`00000011 ffffffff`80000d38 : nt!VfZwSetValueKey+0x6b
fffff880`09fe3fc0 00000000`00000008 : fffff880`09fe4031 00000000`00000011 ffffffff`80000d38 fffff880`09fe4afc : nvlddmkm+0x9b295
fffff880`09fe3fc8 fffff880`09fe4031 : 00000000`00000011 ffffffff`80000d38 fffff880`09fe4afc fffff800`00000004 : 0x8
fffff880`09fe3fd0 00000000`00000011 : ffffffff`80000d38 fffff880`09fe4afc fffff800`00000004 00000000`00000000 : 0xfffff880`09fe4031
fffff880`09fe3fd8 ffffffff`80000d38 : fffff880`09fe4afc fffff800`00000004 00000000`00000000 00000000`00000000 : 0x11
fffff880`09fe3fe0 fffff880`09fe4afc : fffff800`00000004 00000000`00000000 00000000`00000000 00000000`0000017c : 0xffffffff`80000d38
fffff880`09fe3fe8 fffff800`00000004 : 00000000`00000000 00000000`00000000 00000000`0000017c 00000000`00120010 : 0xfffff880`09fe4afc
fffff880`09fe3ff0 00000000`00000000 : 00000000`00000000 00000000`0000017c 00000000`00120010 fffff880`09fe4a0a : 0xfffff800`00000004
STACK_COMMAND: kb
FOLLOWUP_IP:
nvlddmkm+9b295
fffff880`0f327295 488b4dcf mov rcx,qword ptr [rbp-31h]
SYMBOL_STACK_INDEX: 8
SYMBOL_NAME: nvlddmkm+9b295
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: nvlddmkm
IMAGE_NAME: nvlddmkm.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 52b326bc
FAILURE_BUCKET_ID: X64_0xc4_f6_VRF_nvlddmkm+9b295
BUCKET_ID: X64_0xc4_f6_VRF_nvlddmkm+9b295
ANALYSIS_SOURCE: KM
FAILURE_ID_HASH_STRING: km:x64_0xc4_f6_vrf_nvlddmkm+9b295
FAILURE_ID_HASH: {b9cbc4df-f49a-e3ea-a7bf-8726e91f6c99}
Followup: MachineOwner
Other drivers needing updating
nvm62x64.sys 10/17/2008 5:01:06 PM fffff880`04400000 fffff880`04463d80 0x48f8fd12 0x00063d80
anodlwfx.sys 3/6/2009 6:10:08 AM fffff880`041b3000 fffff880`041bc000 0x49b0f680 0x00009000
Wanikiya and Dyami--Team Zigzag -
"Windows has recovered from a critical device failure." UGH!
I get this message a lot, and as you all probably know, it happens unexpectedly, in the middle of the most random activities. I can't think of a single mundane situation on my PC that this crash hasn't reared its ugly head. I can be web surfing, using Outlook, scrolling through a WinAmp playlist, playing a game, opening a document, exploring the file system, setting system settings....anything....but it certainly happens a lot more often when I'm playing games.
I'm beginning to find a small pattern though: this seems to happen much more often if I've just booted up my machine.
Is anyone else noticing that these crashes happen more often shortly after powering on the machine, before the various chips on the motherboard or video card get a chance to "warm up?" I believe this sort of issue is called a "cold-solder" problem, in which silicon-based systems tend to exhibit different behaviors between their cold and hot states.
I tend to lock-up in games only if I launch them soon after powering on my PC. If the PC has been on for an hour or so (and has in essence "burned in" for the night) I have very few problems. The majority of my crashes are in applications that I mess with a lot right after booting up.
Does anyone else witness this sort of behavior from their Radeon 9700 Pro or GNB MAX (and similar) motherboards?
Thanks.
Woland
By the way, I have tried a million different things and none seem to work.
I've replaced the 9700 Pro with a new card.
I've tried with various sound cards and no sound card.
I've got the latest drivers, updates, etc. for Windows XP.
I've tried the base XP drivers for the Radeon 9700.
I've tried the 3.1 and 3.2 Catalyst drivers.
I've updated my BIOS.
I've disabled Hyper-Threading.
I've set AGP aperture to 64.
I've set AGP override to 2X and No Override.
I've set my BIOS to all failsafe settings.
I've reformatted and re-installed Windows XP.
I've tried the latest drivers for various other pieces of hardware.
I've got the latest motherboard drivers.
I've tried various desktop resolutions and bit-depths and refresh rates.
I've upgraded the power supply to 430 Watts.
I've disabled my USB controllers.
I've convinced ATI to give me beta drivers (essentially Catalyst 3.3).
Etc.
Etc.
Etc.
Here's my system:
Windows XP (all the latest updates)
3.06 GHz Intel Pentium 4 Hyper-Threading CPU
MSI GNB MAX FISR (M6565) motherboard (8X AGP, S-ATA, Bluetooth, GBit LAN, etc.) - latest BIOS
ATI Radeon 9700 Pro (many flavors of drivers, now using some beta drivers)
Sound Blaster Audigy 2 Platinum (with internal break-out box) - up to date drivers
2x 512MB Kingston HyperX Dual Channel DDR Memory SIMMs
Western Digital Special Edition Caviar 200GB IDE Hard Drive
Western Digital Caviar 80GB IDE Hard Drive
Sony DRU-500A DVD-RW / DVD+RW Drive
USB 2.0 Controller Enabled (and Disabled)
IEEE1394 Firewire Controller Disabled
Both Onboard IDE Controllers Enabled
Serial ATA Controller Disabled
Floppy Drive Controller Disabled
Parallel and Serial Ports Disabled
Using USB mouse and PS/2 keyboard
ViewSonic GS970 19" monitor
Onboard 10/100/1000 MBit LAN Enabled
Onboard Audio Disabled
Bluetooth Controller DisabledProbably the Radeon vs E7205 problem.
Try the latest ATI drivers and if that won't solve it try setting the bios to AGP x4 override. -
Windows has recovered from an unexpected shut down -- Windows 7 on 64 bit problems
Hi, I know lots of people have had this problem, but I need help --- it seems like since everyone has had this problem since 2009, there should be an easier way to fix it than all the complicated answers I have read so far.
I have a Toshiba Satellite A305; T8100 @ 2.10GHz; 64 bit.
My computer will have an unexpected shut down whenever it is left alone for too long (goes to sleep). I've tried installing the latest drivers.... maybe I am missing something?
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1033
Additional information about the problem:
BCCode: 100000ea
BCP1: FFFFFA8005D77060
BCP2: 0000000000000000
BCP3: 0000000000000000
BCP4: 0000000000000000
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1
Files that help describe the problem:
C:\Windows\Minidump\030711-55239-01.dmp
C:\Users\Tina\AppData\Local\Temp\WER-141149-0.sysdata.xmlTHREAD_STUCK_IN_DEVICE_DRIVER_M (100000ea)
The device driver is spinning in an infinite loop, most likely waiting for
hardware to become idle. This usually indicates problem with the hardware
itself or with the device driver programming the hardware incorrectly.
Arguments:
Arg1: fffffa8005d77060, Pointer to a stuck thread object. Do .thread then kb on it to find
the hung location.
Image path: \SystemRoot\system32\DRIVERS\atikmdag.sys
Image name: atikmdag.sys
Timestamp: Thu Jul 30 06:23:28 2009 (4A712040)
CheckSum: 005CC239
ImageSize: 00617000
Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
1: kd> k
Child-SP RetAddr Call Site
fffff880`069de588 fffff880`04e95f63 nt!KeBugCheckEx
fffff880`069de590 fffff880`04e96112 dxgkrnl!TdrTimedOperationBugcheckOnTimeout+0x37
fffff880`069de600 fffff880`048a909a dxgkrnl!TdrTimedOperationDelay+0xbe
fffff880`069de640 00000000`00000000 atikmdag +0x3109a
your extremely old ATI catalyst driver is the cause. Update the driver:
http://game.amd.com/us-en/drivers_catalyst.aspx
André
"A programmer is just a tool which converts caffeine into code"
Want to install RSAT on Windows 7 Sp1? Check my HowTo: http://www.msfn.org/board/index.php?showtopic=150221 -
This happened 3 times in a few days already, mostly working with audio, my macbook suddenly quits and reboots after pressing a key to dismiss a message, Then it shows this report:
Your computer was restarted because of a problem.
Anonymous UUID: 5B88CF03-01AE-E920-7248-FF84D0587892
Mon Nov 17 07:08:48 2014
panic(cpu 5 caller 0xffffff8029adc43e): Kernel trap at 0xffffff7fac152962, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0xffffff8220a48000, CR3: 0x0000000002e3a047, CR4: 0x00000000001606e0
RAX: 0x0000000000000000, RBX: 0x0000000000006290, RCX: 0x00000000fffec0bc, RDX: 0xffffff821f815500
RSP: 0xffffff821849bd10, RBP: 0xffffff821849bd20, RSI: 0xffffff8220a48000, RDI: 0x0000000000000000
R8: 0x0000000000000000, R9: 0x0000000000000000, R10: 0x0000000000000000, R11: 0x0000000000000000
R12: 0xffffff804e6eb800, R13: 0xffffff82207d3510, R14: 0x0000000000000000, R15: 0x00000000ffffeff0
RFL: 0x0000000000010283, RIP: 0xffffff7fac152962, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0xffffff8220a48000, Error code: 0x0000000000000002, Fault CPU: 0x5
Backtrace (CPU 5), Frame : Return Address
0xffffff821849b9a0 : 0xffffff8029a22f79
0xffffff821849ba20 : 0xffffff8029adc43e
0xffffff821849bbf0 : 0xffffff8029af3976
0xffffff821849bc10 : 0xffffff7fac152962
0xffffff821849bd20 : 0xffffff7fac13d5ef
0xffffff821849bd80 : 0xffffff7faa3839a0
0xffffff821849bdd0 : 0xffffff7faa3837d3
0xffffff821849bdf0 : 0xffffff7faa3835b1
0xffffff821849be60 : 0xffffff7faa37ebf8
0xffffff821849bef0 : 0xffffff7faa37e997
0xffffff821849bf30 : 0xffffff8029ed042e
0xffffff821849bf70 : 0xffffff8029ac9b9d
0xffffff821849bfb0 : 0xffffff8029af4196
Kernel Extensions in backtrace:
com.apple.iokit.IOAudioFamily(1.9.7f2)[092DA230-DD20-3369-A32B-E162A496C638]@0x ffffff7faa374000->0xffffff7faa3a2fff
dependency: com.apple.kext.OSvKernDSPLib(1.14)[7C60EDB3-7527-3412-B424-C9A667A65B92]@0xffff ff7faa362000
jp.co.roland.RDUSB017CDev(1.0)[7696C4FB-CF66-30F7-8CCB-6BDC8F0ED28B]@0xffffff7f ac138000->0xffffff7fac155fff
dependency: com.apple.iokit.IOAudioFamily(1.9.7fc2)[092DA230-DD20-3369-A32B-E162A496C638]@0 xffffff7faa374000
dependency: com.apple.iokit.IOUSBFamily(686.4.1)[815E4F64-F2D5-3847-931A-BE755698D993]@0xff ffff7faa01c000
BSD process name corresponding to current thread: coreaudiod
Mac OS version:
13F34
Kernel version:
Darwin Kernel Version 13.4.0: Sun Aug 17 19:50:11 PDT 2014; root:xnu-2422.115.4~1/RELEASE_X86_64
Kernel UUID: 9477416E-7BCA-3679-AF97-E1EAAD3DD5A0
Kernel slide: 0x0000000029800000
Kernel text base: 0xffffff8029a00000
System model name: MacBookPro10,1 (Mac-C3EC7CD22292981F)
System uptime in nanoseconds: 46064955942116
last loaded kext at 21988354021528: jp.plentycom.driver.SteerMouse 4.1.8 (addr 0xffffff7fac168000, size 45056)
last unloaded kext at 19692191511720: com.apple.driver.IOBluetoothHIDDriver 4.2.7f3 (addr 0xffffff7fac156000, size 73728)
loaded kexts:
jp.plentycom.driver.SteerMouse 4.1.8
jp.co.roland.RDUSB017CDev 1.0.0
com.tuxera.filesystems.tufsfs.fusefs_txantfs 2013.3.14
com.ploytec.xone2d.usb 3.2.2
at.obdev.nke.LittleSnitch 4226
com.apple.filesystems.smbfs 2.0.3
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AudioAUUC 1.60
com.apple.filesystems.autofs 3.0
com.apple.iokit.IOBluetoothSerialManager 4.2.7f3
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AppleMikeyDriver 2.6.3f4
com.apple.driver.AGPM 100.14.34
com.apple.driver.ApplePlatformEnabler 2.0.9d7
com.apple.driver.X86PlatformShim 1.0.0
com.apple.driver.AppleUpstreamUserClient 3.5.13
com.apple.driver.AppleHDA 2.6.3f4
com.apple.GeForce 8.2.6
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.2.7f3
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleMuxControl 3.6.22
com.apple.driver.AppleIntelHD4000Graphics 8.2.8
com.apple.driver.AppleIntelFramebufferCapri 8.2.8
com.apple.driver.AppleSMCLMU 2.0.4d1
com.apple.driver.AppleHWAccess 1
com.apple.driver.AppleMCCSControl 1.2.5
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.driver.AppleLPC 1.7.0
com.apple.driver.AppleThunderboltIP 1.1.2
com.apple.driver.AppleUSBTCButtons 240.2
com.apple.driver.AppleUSBTCKeyboard 240.2
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeLZVN 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.6.0
com.apple.driver.AppleUSBHub 683.4.0
com.apple.driver.AppleSDXC 1.5.2
com.apple.driver.AirPort.Brcm4331 700.20.22
com.apple.driver.AppleAHCIPort 3.0.5
com.apple.driver.AppleUSBEHCI 660.4.0
com.apple.driver.AppleUSBXHCI 683.4.0
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleACPIButtons 2.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 2.1
com.apple.driver.AppleACPIEC 2.0
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 217.92.1
com.apple.nke.applicationfirewall 153
com.apple.security.quarantine 3
com.apple.driver.AppleIntelCPUPowerManagement 217.92.1
com.apple.driver.IOBluetoothHIDDriver 4.2.7f3
com.apple.driver.AppleThunderboltPCIUpAdapter 1.4.5
com.apple.driver.AppleUSBAudio 2.9.5f8
com.apple.kext.triggers 1.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.6.7
com.apple.iokit.IOSerialFamily 10.0.7
com.apple.driver.DspFuncLib 2.6.3f4
com.apple.vecLib.kext 1.0.0
com.apple.iokit.IOAudioFamily 1.9.7fc2
com.apple.kext.OSvKernDSPLib 1.14
com.apple.iokit.IOAcceleratorFamily 98.23
com.apple.nvidia.driver.NVDAGK100Hal 8.2.6
com.apple.nvidia.driver.NVDAResman 8.2.6
com.apple.iokit.KLog 3.9.0
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.2.7f3
com.apple.driver.AppleGraphicsControl 3.6.22
com.apple.driver.X86PlatformPlugin 1.0.0
com.apple.iokit.IOSurface 91.1
com.apple.iokit.IOAcceleratorFamily2 98.23
com.apple.AppleGraphicsDeviceControl 3.6.22
com.apple.driver.AppleSMC 3.1.8
com.apple.driver.AppleHDAController 2.6.3f4
com.apple.iokit.IOHDAFamily 2.6.3f4
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.driver.AppleSMBusController 1.0.12d1
com.apple.iokit.IONDRVSupport 2.4.1
com.apple.iokit.IOGraphicsFamily 2.4.1
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.driver.IOPlatformPluginFamily 5.7.1d6
com.apple.iokit.IOBluetoothFamily 4.2.7f3
com.apple.driver.AppleUSBMultitouch 240.10
com.apple.iokit.IOUSBHIDDriver 660.4.0
com.apple.driver.AppleThunderboltDPInAdapter 3.1.7
com.apple.driver.AppleThunderboltDPAdapterFamily 3.1.7
com.apple.driver.AppleThunderboltPCIDownAdapter 1.4.5
com.apple.driver.AppleUSBMergeNub 650.4.0
com.apple.driver.AppleUSBComposite 656.4.1
com.apple.driver.AppleThunderboltNHI 2.0.1
com.apple.iokit.IOThunderboltFamily 3.3.1
com.apple.iokit.IOUSBUserClient 660.4.2
com.apple.iokit.IO80211Family 640.36
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOAHCIFamily 2.6.5
com.apple.iokit.IOUSBFamily 686.4.1
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 278.11.1
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.AppleKeyStore 2
com.apple.driver.DiskImages 371.1
com.apple.iokit.IOStorageFamily 1.9
com.apple.iokit.IOReportFamily 23
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 2.0
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.pthread 1
com.apple.kec.corecrypto 1.0
Model: MacBookPro10,1, BootROM MBP101.00EE.B02, 4 processors, Intel Core i7, 2.6 GHz, 16 GB, SMC 2.3f36
Graphics: Intel HD Graphics 4000, Intel HD Graphics 4000, Built-In
Graphics: NVIDIA GeForce GT 650M, NVIDIA GeForce GT 650M, PCIe, 1024 MB
Memory Module: BANK 0/DIMM0, 8 GB, DDR3, 1600 MHz, 0x80AD, 0x484D5434314753364D465238432D50422020
Memory Module: BANK 1/DIMM0, 8 GB, DDR3, 1600 MHz, 0x80AD, 0x484D5434314753364D465238432D50422020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xEF), Broadcom BCM43xx 1.0 (5.106.98.100.22)
Bluetooth: Version 4.2.7f3 14616, 3 services, 23 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en0
PCI Card: pci1b21,612, AHCI Controller, Thunderbolt@195,0,0
Serial ATA Device: APPLE SSD SM512E, 500,28 GB
Serial ATA Device: ST4000DX000-1CL160, 4 TB
USB Device: Hub
USB Device: USB 2.0 Hub
USB Device: TR-8
USB Device: Moog Minitaur
USB Device: Ableton Push
USB Device: FaceTime HD Camera (Built-in)
USB Device: Hub
USB Device: Allen&Heath Xone:2D
USB Device: Hub
USB Device: Apple Internal Keyboard / Trackpad
USB Device: BRCM20702 Hub
USB Device: Bluetooth USB Host Controller
Thunderbolt Bus: MacBook Pro, Apple Inc., 23.4
Thunderbolt Device: d2, LaCie, 1, 7.4
Help is greatly appreciated!This was the day before:
Anonymous UUID: 5B88CF03-01AE-E920-7248-FF84D0587892
Sun Nov 16 00:36:56 2014
panic(cpu 1 caller 0xffffff80018dc43e): Kernel trap at 0xffffff800170e096, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0xffffff81f8509000, CR3: 0x00000000603b9052, CR4: 0x00000000001606e0
RAX: 0xffffffffffd1a5f0, RBX: 0xffffff803de07a00, RCX: 0x00000000000008c0, RDX: 0x0000000000057600
RSP: 0xffffff81ef443de8, RBP: 0xffffff81ef443df0, RSI: 0xffffff81f87eea10, RDI: 0xffffff81f8509000
R8: 0x0000000000005760, R9: 0xffffff803de07ab0, R10: 0xffffff7f8218e9d0, R11: 0x0000000000000246
R12: 0x00000000000045e0, R13: 0x0000000000005760, R14: 0xffffff8042c18210, R15: 0x0000000000005280
RFL: 0x0000000000010206, RIP: 0xffffff800170e096, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0xffffff81f8509000, Error code: 0x0000000000000002, Fault CPU: 0x1
Backtrace (CPU 1), Frame : Return Address
0xffffff81ef443a70 : 0xffffff8001822f79
0xffffff81ef443af0 : 0xffffff80018dc43e
0xffffff81ef443cc0 : 0xffffff80018f3976
0xffffff81ef443ce0 : 0xffffff800170e096
0xffffff81ef443df0 : 0xffffff7f8218335d
0xffffff81ef443e60 : 0xffffff7f8217ebf8
0xffffff81ef443ef0 : 0xffffff7f8217e997
0xffffff81ef443f30 : 0xffffff8001cd042e
0xffffff81ef443f70 : 0xffffff80018c9b9d
0xffffff81ef443fb0 : 0xffffff80018f4196
Kernel Extensions in backtrace:
com.apple.iokit.IOAudioFamily(1.9.7f2)[092DA230-DD20-3369-A32B-E162A496C638]@0x ffffff7f82174000->0xffffff7f821a2fff
dependency: com.apple.kext.OSvKernDSPLib(1.14)[7C60EDB3-7527-3412-B424-C9A667A65B92]@0xffff ff7f82162000
BSD process name corresponding to current thread: coreaudiod
Mac OS version:
13F34
Kernel version:
Darwin Kernel Version 13.4.0: Sun Aug 17 19:50:11 PDT 2014; root:xnu-2422.115.4~1/RELEASE_X86_64
Kernel UUID: 9477416E-7BCA-3679-AF97-E1EAAD3DD5A0
Kernel slide: 0x0000000001600000
Kernel text base: 0xffffff8001800000
System model name: MacBookPro10,1 (Mac-C3EC7CD22292981F)
System uptime in nanoseconds: 80324243096300
last loaded kext at 72805265398779: jp.plentycom.driver.SteerMouse 4.1.8 (addr 0xffffff7f83f97000, size 45056)
last unloaded kext at 68627566800678: com.apple.driver.IOBluetoothHIDDriver 4.2.7f3 (addr 0xffffff7f83ed7000, size 73728)
loaded kexts:
jp.plentycom.driver.SteerMouse 4.1.8
jp.co.roland.RDUSB017CDev 1.0.0
com.ploytec.xone2d.usb 3.2.2
com.tuxera.filesystems.tufsfs.fusefs_txantfs 2013.3.14
at.obdev.nke.LittleSnitch 4226
com.apple.filesystems.smbfs 2.0.3
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.filesystems.autofs 3.0
com.apple.driver.AudioAUUC 1.60
com.apple.iokit.IOBluetoothSerialManager 4.2.7f3
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AGPM 100.14.34
com.apple.driver.ApplePlatformEnabler 2.0.9d7
com.apple.driver.X86PlatformShim 1.0.0
com.apple.driver.AppleHDA 2.6.3f4
com.apple.GeForce 8.2.6
com.apple.driver.AppleUpstreamUserClient 3.5.13
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.2.7f3
com.apple.driver.AppleMikeyDriver 2.6.3f4
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleLPC 1.7.0
com.apple.driver.AppleMuxControl 3.6.22
com.apple.driver.AppleMCCSControl 1.2.5
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.driver.AppleSMCLMU 2.0.4d1
com.apple.driver.AppleHWAccess 1
com.apple.driver.AppleIntelHD4000Graphics 8.2.8
com.apple.driver.AppleIntelFramebufferCapri 8.2.8
com.apple.driver.AppleThunderboltIP 1.1.2
com.apple.driver.AppleUSBTCButtons 240.2
com.apple.driver.AppleUSBTCKeyboard 240.2
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeLZVN 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.6.0
com.apple.driver.AppleUSBHub 683.4.0
com.apple.driver.AppleSDXC 1.5.2
com.apple.driver.AirPort.Brcm4331 700.20.22
com.apple.driver.AppleUSBEHCI 660.4.0
com.apple.driver.AppleAHCIPort 3.0.5
com.apple.driver.AppleUSBXHCI 683.4.0
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleACPIButtons 2.0
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 2.1
com.apple.driver.AppleACPIEC 2.0
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 217.92.1
com.apple.nke.applicationfirewall 153
com.apple.security.quarantine 3
com.apple.driver.AppleIntelCPUPowerManagement 217.92.1
com.apple.driver.IOBluetoothHIDDriver 4.2.7f3
com.apple.driver.AppleUSBAudio 2.9.5f8
com.apple.kext.triggers 1.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.6.7
com.apple.iokit.IOSerialFamily 10.0.7
com.apple.driver.DspFuncLib 2.6.3f4
com.apple.vecLib.kext 1.0.0
com.apple.iokit.IOAudioFamily 1.9.7fc2
com.apple.kext.OSvKernDSPLib 1.14
com.apple.iokit.KLog 3.9.0
com.apple.iokit.IOAcceleratorFamily 98.23
com.apple.nvidia.driver.NVDAGK100Hal 8.2.6
com.apple.nvidia.driver.NVDAResman 8.2.6
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.2.7f3
com.apple.driver.AppleHDAController 2.6.3f4
com.apple.iokit.IOHDAFamily 2.6.3f4
com.apple.driver.AppleGraphicsControl 3.6.22
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.driver.AppleSMBusController 1.0.12d1
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.iokit.IOSurface 91.1
com.apple.iokit.IONDRVSupport 2.4.1
com.apple.iokit.IOAcceleratorFamily2 98.23
com.apple.AppleGraphicsDeviceControl 3.6.22
com.apple.iokit.IOGraphicsFamily 2.4.1
com.apple.driver.X86PlatformPlugin 1.0.0
com.apple.driver.AppleSMC 3.1.8
com.apple.driver.IOPlatformPluginFamily 5.7.1d6
com.apple.iokit.IOBluetoothFamily 4.2.7f3
com.apple.driver.AppleUSBMultitouch 240.10
com.apple.iokit.IOUSBHIDDriver 660.4.0
com.apple.driver.AppleUSBMergeNub 650.4.0
com.apple.driver.AppleUSBComposite 656.4.1
com.apple.driver.AppleThunderboltDPInAdapter 3.1.7
com.apple.driver.AppleThunderboltDPAdapterFamily 3.1.7
com.apple.driver.AppleThunderboltPCIUpAdapter 1.4.5
com.apple.driver.AppleThunderboltPCIDownAdapter 1.4.5
com.apple.driver.AppleThunderboltNHI 2.0.1
com.apple.iokit.IOThunderboltFamily 3.3.1
com.apple.iokit.IO80211Family 640.36
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOUSBUserClient 660.4.2
com.apple.iokit.IOAHCIFamily 2.6.5
com.apple.iokit.IOUSBFamily 686.4.1
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 278.11.1
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.AppleKeyStore 2
com.apple.driver.DiskImages 371.1
com.apple.iokit.IOStorageFamily 1.9
com.apple.iokit.IOReportFamily 23
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 2.0
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.pthread 1
com.apple.kec.corecrypto 1.0
System Profile:
Model: MacBookPro10,1, BootROM MBP101.00EE.B02, 4 processors, Intel Core i7, 2.6 GHz, 16 GB, SMC 2.3f36
Graphics: Intel HD Graphics 4000, Intel HD Graphics 4000, Built-In
Graphics: NVIDIA GeForce GT 650M, NVIDIA GeForce GT 650M, PCIe, 1024 MB
Memory Module: BANK 0/DIMM0, 8 GB, DDR3, 1600 MHz, 0x80AD, 0x484D5434314753364D465238432D50422020
Memory Module: BANK 1/DIMM0, 8 GB, DDR3, 1600 MHz, 0x80AD, 0x484D5434314753364D465238432D50422020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xEF), Broadcom BCM43xx 1.0 (5.106.98.100.22)
Bluetooth: Version 4.2.7f3 14616, 3 services, 23 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en0
PCI Card: pci1b21,612, AHCI Controller, Thunderbolt@195,0,0
Serial ATA Device: APPLE SSD SM512E, 500,28 GB
Serial ATA Device: ST4000DX000-1CL160, 4 TB
USB Device: Hub
USB Device: USB 2.0 Hub
USB Device: Moog Minitaur
USB Device: TR-8
USB Device: Ableton Push
USB Device: FaceTime HD Camera (Built-in)
USB Device: Hub
USB Device: Allen&Heath Xone:2D
USB Device: Hub
USB Device: BRCM20702 Hub
USB Device: Bluetooth USB Host Controller
USB Device: Apple Internal Keyboard / Trackpad
Thunderbolt Bus: MacBook Pro, Apple Inc., 23.4
Thunderbolt Device: d2, LaCie, 1, 7.4 -
Itunes 7 + Win XP Pro (Recover from a serious error0
Everytime i turn on my PC I get this window telling me that windows has recovered from a serious error. The last blue screen I got was almost a week ago. I have done system retore to pre iTunes 7 and i continue to get this error. iTunes 7 is the only recent change to my computer(which is almost 5 yrs old) Is it my computer, Windows, or iTunes??
i wish I had time to do that except by the time i reformat, and restore all my files that will kill a whole afternoon. I plan on buying an imac when leopard comes out, considering that itunes , office and IE are all i use this computer for hopefully it can survive til spring (knock on wood) Thanks
-
Windows has detected a registry/configuration error
I haven't used my Protege 3110CT in many years. When I start to boot up I get the message:
Warning: Windows has detected a registry/configuration error. Use SCANREG to correct this error.
However, I cannot get into DOS to do a SCANREG nor do I know any other method.
I do not have any of the startup disks.
My machine has Windows ME on it.
I do have an external floppy drive and CD drive.
Any assistance is appreciated.
BobPortege 3110CT
You can download a bootable DOS floppy here.
http://www.bootdisk.com/bootdisk.htm
If you can locate a download of Scanreg.exe, then boot to DOS and run scanreg /restore to
go back to a previous known working copy of your Windows Me registry.
Maybe this one works (I don't know).
http://www.mesich.com/download/SCANREG.EXE
-Jerry -
It's a strange little anomaly, computer seems to work fine, never crashes, all programs are running fine, but when I do a restart or a shutdown it restarts with the "recovering from an error..." message. It happens all the time, even if I've opened nothing (just started up and then shutdown, [I have nothing starting up at login]). I have checked all the permissions and verified the disk... Everything checks out ok. Only 'non-legit' program or app I have is the VLC player, but I don't see how that could affect the shutdown or restart process.
Hi Norbert,
Forcing a shutdown can cause hard drive directory corruption. You should start from the install disc and repair the disk with Disk Utility.
When other methods don't work, holding the power button to force a shutdown is the only way. You can try control-F12 (opens the Restart, Sleep, Shutdown dialog box) and then press return to shutdown or control-command-F12 (quit all applications and restart).
If just one application is hanging try using Force Quit (command-option-esc). That will also work to force quit the Finder if it hangs.
John
Maybe you are looking for
-
I have apple ID and when trying to sign in to use FaceTime,I always get error in registration,(This words always apper; The server encountered an error processing registration.Please try again later.) Can I get your Advise on what to do? Thanks
-
Trying to capture audio from the computer output.
I'm trying to figure out how to capture the sound output, and either record it as a .wav, .mp3, or garage band track. The end goal(s): 1. Full screen video and audio capture -- for example, capture a window as a video, and any sound effects generated
-
Charts: date displacement on DateTimeAxis
Hi all, I have a strange behaviour of the datatips in a linechart object that the days within the datatips are shifted by one day into the past. It is the same behaviour as shown in the "Adobe Flex 3 Component Explorer" http://examples.adobe.com/flex
-
Front panel remains after terminating lavbiew application
I have created an application from a LabView VI. I'm launching the application from LabWindows. I'm monitoring for the application to terminate. However, when I terminate the LabVeiw application, the LabView front panel is displayed and the LabWin
-
Do we have an procedure to gracefully shut down the MDS-9513?
Hello All Do we have an procedure to gracefully shut down the MDS-9513? Please advise Thanks Chetan