Windows has stopped this device because it has reported problems. (Code 43)
ipod touch is not recognized by windows 7 64bit system please help
Maybe here:
error code 43 when USB not recognised - Microsoft Answers
Similar Messages
-
please help...
my computer is not recognizing my ipod classic gen 5. it shows the sad face then i did the basic troubleshooting until logo comes out...
still my computer is not recognizing my ipod.. it still says "Windows has stopped this device because it has reported problems. (Code 43)"See here: iPod displays a sad iPod icon
Note that it's often a good sign of a hardware issue with the iPod's hard drive meaning the iPod will need to be serviced or replaced.
B-rock -
""windows has stopped this device because it has reported problems. (code 43)"" it says this when i connect my iphone4 to my laptop, and the phone is stuck in recovery mode, wat can i do???
Read http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/code-43-wind ows-has-stopped-this-device-because-it/b9cf1b3e-2b71-4b54-adc6-2dda9c73cd5a
-
Device not detected
My iphone is not dedtedcted by the computer. I am having Windows 7.Windows has stopped this device because it has reported problems. (Code 43) Error code no 43 is shown. I tried to fix it by running fix it porg in Micro soft tech net. Still the problem has not been solvedFolling this article step by step: http://support.apple.com/kb/ht1923 is the last thing I can think of, or try to create another user account/try on another computer....
Sorry for the multiple posts -
HT1386 Windows has stopped this device because it has reported problems. (Code 43)
Windows has stopped this device because it has reported problems. (Code 43)
When I try to sync to windows 7 machine has been synced before.Folling this article step by step: http://support.apple.com/kb/ht1923 is the last thing I can think of, or try to create another user account/try on another computer....
Sorry for the multiple posts -
ipod a1204 emc 2125 Windows has stopped this device because it has reported problems. (Code 43)
ipod a1204 emc 2125 Windows has stopped this device because it has reported problems. (Code 43) what does it mean
-
HT4236 Windows has stopped this device because it has reported problems. (Code 43)
Cpu does not recognize the IPod Nano Gen6 since upgrading to new device and getting this error code...Windows has stopped this device because it has reported problems. (Code 43). I have even uninstalled and reinstalled ITunes...still no joy. Suggestions please??
Folling this article step by step: http://support.apple.com/kb/ht1923 is the last thing I can think of, or try to create another user account/try on another computer....
Sorry for the multiple posts -
I have a workstation with following configurations:
Display adapter NVIDIA Quadra K4000
OS: Windows Server 2012 Standard (64 bit)
Hyper-V virtual GPU: NVIDIA K4000
Hyper-V VM 1: Windows 8 Enterprise 32 bit
Hyper-V VM 2: Windows 8.1 Enterprise 64 bit
Both the 2 VMs above has the RemoteFX video adapter added and are supposed to have RemoteFX display working.
However it only works in the VM 1 (Windows 8). In the VM 2 (Windows 8.1) the display adapter (Microsoft RemoteFX Graphics Device - WDDM) is reported "Windows has stopped this device because it has reported problems (Code 43)"
Anyone ever experienced a similar issue?
Much appreciated :)
Hi leon,
I am currently standing by for an update from you and would like to know how things are going on your end. Should you have any questions or concerns with the
suggestions I provided, please don't hesitate to let me know.
Regards,
Kelvin hsu
TechNet Community Support -
This device has been stopped because it has reported problems. (Code 43)
I can't connect my ipad with usb. please help....
Hi,
In my opinion, since system threw the error message: "Code 43: Windows has stopped this device because it has reported problems." There is two possible reason of this problem:
1. Driver compatibility problem, however, it's hard to make troubleshoot and fix this problem.
2. Driver installed problem, we can resolve this problem by uninstall the problematic driver and reinstall a new version. You can follow the steps of the link below to reinstall the driver:
https://technet.microsoft.com/en-us/library/cc725873(v=ws.10).aspx
In addition, it would be better to use driver verifier to check current graphic card driver compatibility.
https://msdn.microsoft.com/en-us/library/windows/hardware/ff545448(v=vs.85).aspx
Roger Lu
TechNet Community Support -
My iPod Classic is not detected by my Windows 8 computer when I connect it via USB port. How can I get windows to detect this device? A message from windows says: the device has malfunctioned.
Try TS1363: iPod: Appears in Windows but not in iTunes.
See also Corrupt iPod classic.
tt2 -
when connecting my iphone 4 to itunes for the first time i get the following message "cannot connect to this device because Apple Mobile Service is not started" what does this mean and how do I solve it?
I'd start with the following document with that one:
iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows -
'''Fennec 4.0b6pre (arm6 nightly build) installs but immediately closes giving this message on X10 mini pro 2.1 "Fennec does not support this device and you may experience problems." and two option "continue" & "quit" but closes before clicking any button immediately. '''
https://wiki.mozilla.org/Mobile/Platforms/Android#System_Requirements
Your device (I assume it's `'''Sony Ericsson Xperia X10 Mini'''`) is not compatible with Fennec ARMv7-optimized releases, but might be able to run the [https://wiki.mozilla.org/Mobile/Platforms/Android#ARMv6_.28experimental.29 experimental ARMv6 nightly builds]. -
Hey, just bought an iPhone 3GS off a friend an am looking to sync it to iTunes The version is 4.3.3. Is this normal ?. The device fails to appear in Itunes however. I have checked my USB ports under device manager and there is an 'Standard Enhanced PCI to USB Host Controller'. Does this mean all my ports are 2.0? When I connect my device it says ' This device Can perform faster' if connected to a USB port. Need Advice.
ThanksMinimum requirements for the iPhone 3GS for Windows for USB is 2.0.
http://ask-leo.com/how_can_i_tell_if_i_have_usb_20.html
http://support.apple.com/kb/SP565
This article may help. http://support.apple.com/kb/HT4049
Since yours says, "enhanced" .. it should be 2.0
Try disabling a/v software and turning off the Firewall then sync.
Disable antivirus software
Turn Windows Firewall on or off
iOS: Device not recognized in iTunes for Windows -
HP Pavilion dv6500, upgraded several years ago to Windows 7 32 bit. In the past few days I have noticed that the DVD/CD-ROM drive does not appear on My computer/ Windows Explorer. I also incidentally noted that my program "HP Total Care Advisor" no longer works: "HP Advisor has stopped working" is the error message I get when I double click the desktop Icon. I have made no changes to the computer, nor have I installed any new software shortly before I noticed these problems.
I went through troubleshooting for most of today. The DVD drive does appear in BIOS and in the Device Manager. I have uninstalled and reinstalled the device and it's drivers. I believe the correct drivers are present but cannot be installed. I believe the problem is expressed in the following error message which I have obtained: "Windows cannot start this hardware device because it's configuration information (in the registry) is incomplete or damaged (code 19)."
When I saw this I thought a restore of Windows would do the trick. I went back to Feb. 1, 2012 but that did not help. Then I reversed that restore and went back to Jan 25, 2012. That did not help, so I reversed that restore and gave up on restore.
I have no experience in the registry, so if the solution is to make changes in the registry, I will need very specific instructions.
Thank you,
Allen WorrallI did some further reading in the forums and tried a few things What fixed my problem was reinstalling iTunes because they just updated last week and that is when my problem started. After i reinstalled through the control panel (repair install) it worked again,
-
It happened once before, but it fixed itself. I read about it online and people say they brought their iPods to Apple and they said its Windows causing the error. Its not one of their error messages.
1st : Install SP1,SP2 and ALL Microsoft Online Updates. There were known issues in Vista with Apple ipods usb syncing feature in Vista, but in the lifetime of Vista it was fixed several times, so update the OS.
2nd : If you have a x64 version of Vista you MUST use itunes also in 64bit, because it installs drivers into the OS. 32bit drivers wont work properly in 64bit OS, even if the application itself will start.
See the "Welcome Center" in Vista for computer details.
Message was edited by: Sjazbec
Maybe you are looking for
-
I am a teacher and would like to know how to use the iPad in the classroom?
I am a teacher and would like to know how to use the iPad in the classroom?
-
Creating a new application profile
Hi Hyperion Gurus, Need your advice on an issue we are facing now: In our current application (HFM 11.1.2.2. EPMA), we have created our application profile with only English as the language. We have 3 applications residing on our current profile. We
-
Problems with Airport setup after buying Version 7 models, (older ones will not upgrade) I re set up my Airport network , having had 4 expresses for years doing a good job. I bought another and an express, but then a time capsule after my external dr
-
Adding custom text besides selection screen field
Hi All, I need to add some custom text to the selection screen field "CtegoryID" in the Product search screen(thru the link "Internal Goods")....I sthis possible thru change os some template?If yes,which one?? Regards, Disha.
-
hi all, i want to model an interrupt handler i have a class that is working it's job and when it receive the interruption it should cancel it's job and execute the interrupt handler