Windows host view of VBox host only adapter

This question was brought to my attention a few days ago by someone who thought the Vbox hostonly adapter got its IP address from the user's router. I had a difficult time setting him straight, but he did have a configuration that is puzzling. On the host Windows system, drilling down from the control panel ...
Where I have assigned an IP address, (see screenshot)
He had "obtain an IP address automatically. His hostonly adapter was running with the default value of 192.168.56.1.
Until now, I had never really had a reason to take a look how the host sees the hostonly adapter. I had only ever looked at it from the VBox manager. So there is a gap in my understanding here.

Dude! wrote:
The Host-only adapter provides built-in DHCP services and a network proxy for the virtual machine to access the host computer system. The VirtualBox DHCP server can be configured in the Network settings of the VirtualBox application preferences.
The virtual machine guest OS can use static or automatic TCP/IP addressing. The default IP range for static addressing is 192.168.56.2 to 192.168.56.99. Using this adapter, the virtual machine guest OS can access the host system only by using the Host-only adapter in place of the actual configured host system IP address. The default address of the Host-only adapter is 192.168.56.1. VirtualBox will automatically do the necessary traffic forwarding.
Yes, I understand all that, and nothing new there. What I am confused about the is the host's view of the VBox hostonly adapter, as a network adapter right along side the standard "Ethernet adapter Local Area Connection", etc. In particular, why the host says the adapter is configured to "Obtain an IP address automatically" (DHCP). We know that this adapter is created and configured by the VBox manager. We know that the VBox manager gives it its IP address (with the default being 192.168.56.1). So why does the host OS think it is assigning a DHCP address to the adapter? And why would THAT not be constant across different machines? ( Well, maybe I know the answer to that second question. We are dealing with Windows here. And we know that no two Windows systems are ever the same if they've been out of the shrink wrap for more than five minutes.)

Similar Messages

VirtualBox 4.0.2 internal DHCP problem in Host-only mode?

Hi,
dos anyone have experience problems with VirtualBox 4.0.2 internal DHCP not working when running Oracle Linux and a Host-Only adapter.
More detailed described my problem is that Oracle Linux don't get a ip from the internal DHCP server om my system. My host is Win 7 (64 bit) and Guest Oracle Linux (64 bit). I have read that there are several ohers who experienced the same problem with the open source version, but that patching the Guest Tools to 4.0.3 helped them. Sadly this is not the case for me. Any suggestions are welcome and thanks in advance.

Thanks for your reply - my problem is that the build in dhcp server is not working for some reason and i dont't gen any ip address assigned. I can see from the VBoxManager that it is running, but i can't get i contact with it from the linux guest.

[solved] problem getting vbox host only networking going on arch host

New arch user here, been running for 2-3 weeks. Finally came across something I can't wiki/google my way through, trying to get host only networking going.
So.... I started by trying the graphical virtualbox manager. File -> preferences -> network -> add, which gives:
Failed to create the host-only network interface.
Callee RC: NS_ERROR_ABORT (0x80004004)
Tried the following also, with no luck:
> VBoxManage hostonlyif create
VBoxManage: error: Code NS_ERROR_ABORT (0x80004004) - Operation aborted (extended info not available)
Context: "CreateHostOnlyNetworkInterface (hif.asOutParam(), progress.asOutParam())" at line 64 of file VBoxManageHostonly.cpp
Segmentation fault
> VBoxManage dhcpserver add --ifname hth0 --ip 10.1.1.1 --netmask 255.255.255.0 --lowerip 10.1.1.10 --upperip 10.1.1.20 --enable
VBoxManage: error: The host network interface with the given name could not be found
VBoxManage: error: Details: code NS_ERROR_INVALID_ARG (0x80070057), component Host, interface IHost, callee nsISupports
Context: "FindHostNetworkInterfaceByName(Bstr(pIfName).mutableRaw(), hif.asOutParam())" at line 225 of file VBoxManageDHCPServer.cpp
VBoxManage: error: Could not find interface 'hth0'
> uname -a
Linux bing 3.1.1-1-ARCH #1 SMP PREEMPT Fri Nov 11 22:28:29 CET 2011 x86_64 AMD E-350 Processor AuthenticAMD GNU/Linux
> lsmod | grep vbox
vboxnetflt 17159 0
vboxdrv 1790690 1 vboxnetflt
> pacman -Q virtualbox
virtualbox 4.1.6-3
I also have extension pack 4.1.6r74713 if that matters.
edit: code tags
Last edited by nht (2011-11-19 16:37:49)

Thank you sir, that's exactly what I needed.
Now that I look, I see mention of this in the VirtualBox Extras section of the wiki, but not the VirtualBox or Advanced VirtualBox Networking sections. I have edited the Advanced VirtualBox Networking wiki to add mention of this.
Last edited by nht (2011-11-19 17:18:28)

Internet access to the guest system for Host-Only configuration

Hello,
I have a windows host linux guest vBox environment and it's configured as host-only. How can I enable internet access within the guest? I am towards the end of a RAC installation and upon running buildcluster.sh, it says the recommended RPM "oracle-validated" not installed or has unsatisfied dependencies. It seems i have quite a few RPMs need to download and thus prefer to be able to connect to the internet within the guest so i can do it from the Oracle yum server.
Thanks,
Harry

Hi,
this won't work so easiliy with a "Host Only" network.
You either need a bridges network or a NAT network.
Easiest thing probably will be to add another interface (network) to the VM and assigned it as bridged.
Then download/update oracle-validated and remove the interface again.
This way, you don't need to change anything on the server.
Regards
Sebastian

Office 2013: Windows host process (Rundll32) has stopped working

Hi,
I have problems with adding additional e-mail address to my Outlook. When I open the Mail Control Panel Item, go to my Exchange Profile and add a new e-mail address I get a popup indicating that the Windows host process (Rundll32) has stopped working.
The only way of adding extra e-mail addresses is to remove my entire Outlook Profile. In the initial wizard I can add all Exchange mailboxes that I need (I have 3). After I've configured my Outlook profile I always receive the Rundll32 error. When I try
to create a second Outlook profile I still get the same error.
I've tried the following:
- Repair OST file
- Repair Office -> Control Panel and Online Repair
- Reinstall Office
- Reinstall my entire PC
It doesn't matter which e-mail address I add in the initial Outlook configuration wizard. I always receive the error when I try to add a new mailbox, even when I add a mailbox that does not exist (e.g. [email protected]).
Even after reinstalling my PC I still get the same error. I'm using Windows 8.1 (x64) and Office 2013 (32-bit) on a Lenovo W540. None of my colleagues have this issue. It's a domain joined PC and we are not using Roaming Profiles.
For troubleshooting I also created a local account on my laptop but I get the same issues with this account.

Hi,
I'm also using Office 2013 32-bit and Windows 8.1 64-bit on my computer but doesn't get this issue. As you mentioned you reinstalled your PC, the first thing I suggest is to make sure your Windows and Office have been up to date.
The second thing is to make sure you are using the system with an administrator account, this ensures you the enough permission.
There is a possibility that some 3rd-party programs are interfering with "Mail", we can try to perform a clean boot to determine whether background programs are interfering with this:
1.Swipe in from the right edge of the screen, and then tap Search. Or, if you are using a mouse, point to the lower-right corner of the screen, and then click
Search.
2.Type msconfig in the search box, and then tap or click
msconfig.
3.On the Services tab of the System Configuration
dialog box, tap or click to select the Hide all Microsoft services
check box, and then tap or click Disable all.
4.On the Startup tab of the System Configuration
dialog box, tap or click Open Task Manager.
5.On the Startup tab in Task Manager, for each startup item, select the item and then click
Disable.
6.Close Task Manager.
7.On the Startup tab of the System Configuration
dialog box, tap or click OK, and then restart the computer.
If in clean boot the issue doesn't exist, the issue was probably caused by the 3rd-party programs. For further information to troubleshoot, you can refer to this kb below:
http://support.microsoft.com/kb/929135
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

How to install Oracle Grid Agent 11g into windows hosts ?

Hi there, I was not able to deploy management agents into windows hosts machines !
I followed steps below and I am getting these errors :
On windows 2003 server, I have downloaded grid agent here :
D:\grid\Windows_X64_Grid_Control_agent_download_11_1_0_1_0\windows_x64\agent
I have setup.exe file ! When I double click it, I got this message :
Only silent installation is supported search help.
Well, I did a lot of times setup.exe -silent -responseFile <path>additional_response.rsp and the setup process tells me that I am not following the security procedures.
I am newbie on Grid!
I don´t want deploy agent using deployment wizard due to security resctrictions, they do not allow openssh servers on windows servers.
Have you guys succeeded with this installation ? I mean, install fresh agent on single target windows server machine!
I would appreciate any help.
Tks.
Edson - CLARO

Edson,
what I would do is go for the cloning option.
On the OMS Server an Agent has been installed as part of the OMS installation.
Stop this Agent
AGENT_HOME/bin/emctl stop agent
Create a zip file from the agent11g folder
Copy it to a server where you want to install the Agent
unzip the folder in the location where you want to install
Restart the Agent you had stopped on your OMS server
AGENT_HOME/bin/emctl start agent
On the destination server
Then from the AGENT_HOME/oui/bin
runInstaller -clone -forceClone ORACLE_HOME=<full path of Agent Folder> ORACLE_HOME_NAME=OracleHomeAgent11g -noconfig -silent b_chainedInstall=false oracle.sysman.top.agent:s_installType=AGENT
Then from AGENT_HOME/bin/agentca -f
AGENT_HOME/root.sh (Under Unix this needs to be run as user root, not sure if this procedure is the same under Windows)
This is based on the procedure described in MOS note : How to Clone a Management Agent And Known Issues [ID 579156.1] which referes to a 10.2.0 Agent, but I have been able to use this procedure under Windows with a 11.1 Agent as well.
Goodluck
Regards
Rob
http://oemgc.wordpress.com

Migration of Oracle 32-bit to 64-bit on same Windows host.

Hi,
Title: Migration of Oracle 32-bit to 64-bit on same Windows host.
We have windows host x64 bit. Oracle is 10g 32 bit and we want to migrate it to 10g 64 bit. I would like to know the steps. Note 940811 is not clear enough.
Please help.
Many thanks,
Mohan.

Hi,
I think SAP Note 940811 is not relevant to your case as far as I understand your case in your previous thread because you are already on oracle 10.2 and there is no upgrade required.
Please check SAP note 192822 and please check below extract from this note:
      5. Can I switch to 64-bit, even though I already run the same oracle release on 32-bit?
      Yes. The only thing that needs to be done is
run del_ora.csh to delete the 32-bit software
install the 64-bit software
start the database.
As the wordsize changes with 64-bit, all pl-sql-predures should be recompiled.
      Therefore please run the following two scipts on db-level:
      @$ORACLE_HOME/rdbms/admin/utlip.sql -invalidates all plsql-procedures
      @$ORACLE_HOME/rdbms/admin/utlrp.sql -recreates the plsql-procedures with the new word size
Thanks
Sunny

QEMU host-only networking using tap devices

I'm trying to setup host-only networking on my QEMU VM running Arch (actually, the Archiso; there is no Arch installation present yet). A short summary:
What I want
connect to the host from the guest system
connect to the guest from the host system
using a tap device (to avoid user-mode networking) on a network bridge (to connect guest and host)
Eventually, I want to run an AMP stack on the VM for web development. (Let's, for now, ignore the fact that I might need an internet connection later on to install packages)
What I tried
I first set up a tap device:
ip tuntap add dev tap0 mode tap
and then a network bridge:
BRIDGE='qemubr0'
brctl addbr ${BRIDGE}
brctl addif ${BRIDGE} tap0
ip link set up dev ${BRIDGE}
The relevant parameters I run QEMU with are:
qemu-system-x86_64 \
-net nic \
-net tap,ifname=tap0,script=no
QEMU starts without any errors, but trying to ping the host from within the VM results in:
-- VM:
# ping 10.0.2.2
connect: Network is unreachable
(FYI: 10.0.2.2 is supposed to be the default IP address of the host system (?) according to http://wiki.qemu.org/Documentation/Networking )
Relevant logs/outputs
dmesg on the host machine:
[ 0.339337] NET: Registered protocol family 2
[ 0.339670] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.339851] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.340102] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.340171] TCP: reno registered
[ 0.340182] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.340226] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.340327] NET: Registered protocol family 1
[ 0.340353] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.341863] PCI: CLS 64 bytes, default 64
[ 0.341937] Unpacking initramfs...
[ 0.503984] Freeing initrd memory: 4908K (ffff88003765a000 - ffff880037b25000)
[ 0.504055] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.504060] software IO TLB [mem 0xb94a1000-0xbd4a1000] (64MB) mapped at [ffff8800b94a1000-ffff8800bd4a0fff]
[ 0.504112] Simple Boot Flag at 0x35 set to 0x1
[ 0.504352] microcode: CPU0 sig=0x1067a, pf=0x80, revision=0xa0c
[ 0.504364] microcode: CPU1 sig=0x1067a, pf=0x80, revision=0xa0c
[ 0.504475] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 0.504524] Scanning for low memory corruption every 60 seconds
[ 0.505041] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.505090] Initialise system trusted keyring
[ 0.505685] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.508836] zpool: loaded
[ 0.508841] zbud: loaded
[ 0.509100] VFS: Disk quotas dquot_6.5.2
[ 0.509170] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.509392] msgmni has been set to 7699
[ 0.509494] Key type big_key registered
[ 0.509767] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.509826] io scheduler noop registered
[ 0.509830] io scheduler deadline registered
[ 0.509893] io scheduler cfq registered (default)
[ 0.510198] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 0.510482] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
[ 0.510705] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.510713] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 0.510744] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[ 0.510748] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 0.510754] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[ 0.510785] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.510847] pciehp 0000:00:1c.0:pcie04: Slot #0 AttnBtn- AttnInd- PwrInd- PwrCtrl- MRL- Interlock- NoCompl- LLActRep+
[ 1.506690] tsc: Refined TSC clocksource calibration: 1396.499 MHz
[ 1.843356] pciehp 0000:00:1c.0:pcie04: Timeout on hotplug command 0x00000000 (issued 1333 msec ago)
[ 1.843368] pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded
[ 1.843390] pciehp 0000:00:1c.1:pcie04: Slot #1 AttnBtn- AttnInd- PwrInd- PwrCtrl- MRL- Interlock- NoCompl- LLActRep+
[ 2.506739] Switched to clocksource tsc
[ 3.176680] pciehp 0000:00:1c.1:pcie04: Timeout on hotplug command 0x00000000 (issued 1333 msec ago)
[ 3.176691] pciehp 0000:00:1c.1:pcie04: service driver pciehp loaded
[ 3.176703] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 3.176768] vesafb: mode is 1440x900x32, linelength=5760, pages=0
[ 3.176770] vesafb: scrolling: redraw
[ 3.176774] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 3.176807] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90004780000, using 5120k, total 5120k
[ 3.235921] Console: switching to colour frame buffer device 180x56
[ 3.294769] fb0: VESA VGA frame buffer device
[ 3.294803] intel_idle: does not run on family 6 model 23
[ 3.294882] GHES: HEST is not enabled!
[ 3.294990] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 3.316009] 0000:00:03.3: ttyS0 at I/O 0x1830 (irq = 17, base_baud = 115200) is a 16550A
[ 3.316238] Linux agpgart interface v0.103
[ 3.316307] rtc_cmos 00:02: RTC can wake from S4
[ 3.316496] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 3.316535] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 3.316560] ledtrig-cpu: registered to indicate activity on CPUs
[ 3.316751] TCP: cubic registered
[ 3.316954] NET: Registered protocol family 10
[ 3.317338] NET: Registered protocol family 17
[ 3.317735] Loading compiled-in X.509 certificates
[ 3.317757] registered taskstats version 1
[ 3.318307] Magic number: 15:252:84
[ 3.318413] rtc_cmos 00:02: setting system clock to 2015-01-01 16:05:44 UTC (1420128344)
[ 3.318617] PM: Hibernation image not present or could not be loaded.
[ 3.320772] Freeing unused kernel memory: 1136K (ffffffff818e2000 - ffffffff819fe000)
[ 3.320775] Write protecting the kernel read-only data: 8192k
[ 3.324495] Freeing unused kernel memory: 748K (ffff880001545000 - ffff880001600000)
[ 3.326086] Freeing unused kernel memory: 336K (ffff8800017ac000 - ffff880001800000)
[ 3.336977] random: systemd-tmpfile urandom read with 4 bits of entropy available
[ 3.363462] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 3.372761] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.372934] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.379297] ACPI: bus type USB registered
[ 3.379343] usbcore: registered new interface driver usbfs
[ 3.379364] usbcore: registered new interface driver hub
[ 3.380595] usbcore: registered new device driver usb
[ 3.381344] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.381800] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.381991] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 3.382003] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 3.382015] uhci_hcd 0000:00:1a.0: detected 2 ports
[ 3.382060] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001840
[ 3.382412] hub 1-0:1.0: USB hub found
[ 3.382427] hub 1-0:1.0: 2 ports detected
[ 3.383010] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 3.383021] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[ 3.383032] uhci_hcd 0000:00:1a.1: detected 2 ports
[ 3.383073] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001860
[ 3.383523] hub 2-0:1.0: USB hub found
[ 3.383649] hub 2-0:1.0: 2 ports detected
[ 3.384187] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 3.384197] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3
[ 3.384207] uhci_hcd 0000:00:1a.2: detected 2 ports
[ 3.384245] uhci_hcd 0000:00:1a.2: irq 22, io base 0x00001880
[ 3.384679] hub 3-0:1.0: USB hub found
[ 3.384693] hub 3-0:1.0: 2 ports detected
[ 3.385046] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 3.385056] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 3.385067] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 3.385104] uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018a0
[ 3.385391] hub 4-0:1.0: USB hub found
[ 3.385405] hub 4-0:1.0: 2 ports detected
[ 3.386100] ehci-pci: EHCI PCI platform driver
[ 3.386149] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 3.386159] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
[ 3.386169] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 3.386210] uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018c0
[ 3.386499] hub 5-0:1.0: USB hub found
[ 3.386512] hub 5-0:1.0: 2 ports detected
[ 3.387422] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 3.387433] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 6
[ 3.387454] ehci-pci 0000:00:1a.7: debug port 1
[ 3.390536] SCSI subsystem initialized
[ 3.391377] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[ 3.391407] ehci-pci 0000:00:1a.7: irq 23, io mem 0xf0805c00
[ 3.393114] libata version 3.00 loaded.
[ 3.400023] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 3.400556] hub 6-0:1.0: USB hub found
[ 3.400572] hub 6-0:1.0: 6 ports detected
[ 3.420762] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 3.423437] hub 1-0:1.0: USB hub found
[ 3.423452] hub 1-0:1.0: 2 ports detected
[ 3.446764] hub 2-0:1.0: USB hub found
[ 3.446781] hub 2-0:1.0: 2 ports detected
[ 3.470096] hub 3-0:1.0: USB hub found
[ 3.470113] hub 3-0:1.0: 2 ports detected
[ 3.470446] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 3.470457] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 3.470467] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 3.470510] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018e0
[ 3.470855] hub 7-0:1.0: USB hub found
[ 3.470871] hub 7-0:1.0: 2 ports detected
[ 3.471114] ahci 0000:00:1f.2: version 3.0
[ 3.471277] ahci 0000:00:1f.2: irq 26 for MSI/MSI-X
[ 3.471324] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 3.471354] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x1 impl SATA mode
[ 3.471359] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc
[ 3.472602] scsi host0: ahci
[ 3.472778] scsi host1: ahci
[ 3.472926] scsi host2: ahci
[ 3.475424] scsi host3: ahci
[ 3.475545] ata1: SATA max UDMA/133 abar m2048@0xf0805000 port 0xf0805100 irq 26
[ 3.475549] ata2: DUMMY
[ 3.475551] ata3: DUMMY
[ 3.475553] ata4: DUMMY
[ 3.476505] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 3.476517] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 8
[ 3.476540] ehci-pci 0000:00:1d.7: debug port 1
[ 3.480454] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 3.480479] ehci-pci 0000:00:1d.7: irq 19, io mem 0xf0806000
[ 3.490041] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 3.490373] hub 8-0:1.0: USB hub found
[ 3.490387] hub 8-0:1.0: 6 ports detected
[ 3.513423] hub 4-0:1.0: USB hub found
[ 3.513436] hub 4-0:1.0: 2 ports detected
[ 3.536764] hub 5-0:1.0: USB hub found
[ 3.536781] hub 5-0:1.0: 2 ports detected
[ 3.560098] hub 7-0:1.0: USB hub found
[ 3.560115] hub 7-0:1.0: 2 ports detected
[ 3.793361] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.793627] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 3.793633] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 3.793664] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
[ 3.793670] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 3.793788] ata1.00: ATA-8: TOSHIBA THNS128GG4BAAA-NonFDE, AGLA0203, max UDMA/100
[ 3.793792] ata1.00: 250069680 sectors, multi 16: LBA48
[ 3.794031] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 3.794035] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 3.794065] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (SET FEATURES) succeeded
[ 3.794070] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 3.794186] ata1.00: configured for UDMA/100
[ 3.794336] scsi 0:0:0:0: Direct-Access ATA TOSHIBA THNS128G 0203 PQ: 0 ANSI: 5
[ 3.826124] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[ 3.826227] sd 0:0:0:0: [sda] Write Protect is off
[ 3.826232] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.826278] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.827934] sda: sda1 sda2 sda3
[ 3.828454] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.863366] device-mapper: uevent: version 1.0.3
[ 3.863509] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: [email protected]
[ 13.087453] random: nonblocking pool is initialized
[ 17.023466] NET: Registered protocol family 38
[ 17.304211] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 17.773165] thinkpad_ec: thinkpad_ec 0.41 loaded.
[ 17.776308] tp_smapi 0.41 loading...
[ 17.776557] tp_smapi successfully loaded (smapi_port=0xb2).
[ 17.785849] EXT4-fs (dm-0): re-mounted. Opts: data=ordered
[ 18.128026] Monitor-Mwait will be used to enter C-1 state
[ 18.128038] Monitor-Mwait will be used to enter C-2 state
[ 18.128045] Monitor-Mwait will be used to enter C-3 state
[ 18.128052] tsc: Marking TSC unstable due to TSC halts in idle
[ 18.128109] ACPI: acpi_idle registered with cpuidle
[ 18.128216] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[ 18.128538] ACPI: Lid Switch [LID]
[ 18.128632] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
[ 18.128638] ACPI: Sleep Button [SLPB]
[ 18.128774] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 18.128779] ACPI: Power Button [PWRF]
[ 18.133197] Switched to clocksource hpet
[ 18.157152] agpgart-intel 0000:00:00.0: Intel GM45 Chipset
[ 18.157193] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 18.158391] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
[ 18.158864] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 18.161295] thermal LNXTHERM:00: registered as thermal_zone0
[ 18.161300] ACPI: Thermal Zone [THM0] (49 C)
[ 18.163180] thermal LNXTHERM:01: registered as thermal_zone1
[ 18.163184] ACPI: Thermal Zone [THM1] (47 C)
[ 18.201123] systemd-journald[151]: Received request to flush runtime journal from PID 1
[ 18.211042] tpm_tis 00:05: 1.2 TPM (device-id 0x1020, rev-id 6)
[ 18.211049] tpm_tis 00:05: Intel iTPM workaround enabled
[ 18.214146] Non-volatile memory driver v1.3
[ 18.215056] ACPI: Battery Slot [BAT0] (battery present)
[ 18.216407] ACPI: AC Adapter [AC] (on-line)
[ 18.254681] [drm] Initialized drm 1.1.0 20060810
[ 18.486984] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 18.488981] ACPI Warning: SystemIO range 0x0000000000001028-0x000000000000102f conflicts with OpRegion 0x0000000000001000-0x000000000000107f (\_SB_.PCI0.LPC_.PMIO) (20140724/utaddress-258)
[ 18.488992] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 18.488998] ACPI Warning: SystemIO range 0x00000000000011b0-0x00000000000011bf conflicts with OpRegion 0x0000000000001180-0x00000000000011ff (\_SB_.PCI0.LPC_.LPIO) (20140724/utaddress-258)
[ 18.489003] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 18.489006] ACPI Warning: SystemIO range 0x0000000000001180-0x00000000000011af conflicts with OpRegion 0x0000000000001180-0x00000000000011ff (\_SB_.PCI0.LPC_.LPIO) (20140724/utaddress-258)
[ 18.489011] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 18.489014] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 18.489532] wmi: Mapper loaded
[ 18.496450] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[ 18.528954] thinkpad_acpi: ThinkPad ACPI Extras v0.25
[ 18.528960] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 18.528962] thinkpad_acpi: ThinkPad BIOS 6EET55WW (3.15 ), EC 6EHT11WW-1.05
[ 18.528965] thinkpad_acpi: Lenovo ThinkPad X301, model 27763JG
[ 18.562827] mei_me 0000:00:03.0: irq 27 for MSI/MSI-X
[ 18.576844] thinkpad_acpi: detected a 16-level brightness capable ThinkPad
[ 18.578163] thinkpad_acpi: radio switch found; radios are enabled
[ 18.578329] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 18.578333] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 18.589581] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[ 18.589742] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 18.593495] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input5
[ 18.602509] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 18.608125] cfg80211: Calling CRDA to update world regulatory domain
[ 18.608227] [drm] Memory usable by graphics device = 2048M
[ 18.608232] checking generic (d0000000 500000) vs hw (d0000000 10000000)
[ 18.608235] fb: switching to inteldrmfb from VESA VGA
[ 18.608267] Console: switching to colour dummy device 80x25
[ 18.608458] [drm] Replacing VGA console driver
[ 18.627881] Intel(R) Wireless WiFi driver for Linux, in-tree:
[ 18.627886] Copyright(c) 2003- 2014 Intel Corporation
[ 18.628049] iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 18.628121] iwlwifi 0000:03:00.0: irq 28 for MSI/MSI-X
[ 18.633437] i915 0000:00:02.0: irq 29 for MSI/MSI-X
[ 18.633498] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 18.633501] [drm] Driver supports precise vblank timestamp query.
[ 18.633597] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 18.643232] iwlwifi 0000:03:00.0: loaded firmware version 8.83.5.1 build 33692 op_mode iwldvm
[ 18.691553] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled
[ 18.691558] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[ 18.691561] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[ 18.691565] iwlwifi 0000:03:00.0: Detected Intel(R) Ultimate N WiFi Link 5300 AGN, REV=0x24
[ 18.691646] iwlwifi 0000:03:00.0: L1 Disabled - LTR Disabled
[ 18.728972] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: data=ordered
[ 18.767043] iTCO_vendor_support: vendor-support=0
[ 18.775548] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 18.775618] iTCO_wdt: Found a ICH9M-E TCO device (Version=2, TCOBASE=0x1060)
[ 18.781996] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 18.792476] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 18.822944] iwlwifi 0000:03:00.0 wls1: renamed from wlan0
[ 18.836659] fbcon: inteldrmfb (fb0) is primary device
[ 19.343552] Console: switching to colour frame buffer device 180x56
[ 19.352308] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 19.352310] i915 0000:00:02.0: registered panic notifier
[ 19.375020] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 19.397558] acpi device:01: registered as cooling_device2
[ 19.398077] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
[ 19.398394] [drm] Initialized i915 1.6.0 20140725 for 0000:00:02.0 on minor 0
[ 19.398598] snd_hda_intel 0000:00:1b.0: irq 30 for MSI/MSI-X
[ 19.444984] sound hdaudioC0D0: CX20561 (Hermosa): BIOS auto-probing.
[ 19.445424] sound hdaudioC0D0: autoconfig: line_outs=1 (0x1a/0x0/0x0/0x0/0x0) type:speaker
[ 19.445428] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 19.445432] sound hdaudioC0D0: hp_outs=2 (0x19/0x16/0x0/0x0/0x0)
[ 19.445435] sound hdaudioC0D0: mono: mono_out=0x0
[ 19.445438] sound hdaudioC0D0: dig-out=0x1c/0x0
[ 19.445440] sound hdaudioC0D0: inputs:
[ 19.445444] sound hdaudioC0D0: Mic=0x18
[ 19.445447] sound hdaudioC0D0: Internal Mic=0x1d
[ 19.445450] sound hdaudioC0D0: Dock Mic=0x17
[ 19.446528] sound hdaudioC0D0: Enable sync_write for stable communication
[ 19.460104] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input9
[ 19.460484] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 19.460612] input: HDA Intel Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 19.460739] input: HDA Intel Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 19.460861] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 19.507357] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1a0b1, caps: 0xd047b3/0xb40000/0xa0000, board id: 71, fw id: 572156
[ 19.507368] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[ 19.552922] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[ 19.553788] iwlwifi 0000:03:00.0: L1 Disabled - LTR Disabled
[ 19.554188] iwlwifi 0000:03:00.0: Radio type=0x0-0x2-0x0
[ 19.559479] mousedev: PS/2 mouse device common for all mice
[ 19.687534] iwlwifi 0000:03:00.0: L1 Disabled - LTR Disabled
[ 19.687940] iwlwifi 0000:03:00.0: Radio type=0x0-0x2-0x0
[ 19.715231] IPv6: ADDRCONF(NETDEV_UP): wls1: link is not ready
[ 20.522949] cfg80211: Calling CRDA to update world regulatory domain
[ 23.184174] wls1: authenticate with 34:31:c4:5f:07:d1
[ 23.190197] wls1: send auth to 34:31:c4:5f:07:d1 (try 1/3)
[ 23.193077] wls1: authenticated
[ 23.193382] wls1: associate with 34:31:c4:5f:07:d1 (try 1/3)
[ 23.201867] wls1: RX AssocResp from 34:31:c4:5f:07:d1 (capab=0x431 status=0 aid=4)
[ 23.213427] wls1: associated
[ 23.213484] IPv6: ADDRCONF(NETDEV_CHANGE): wls1: link becomes ready
[ 23.213555] cfg80211: Calling CRDA to update world regulatory domain
[ 24.474590] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 24.727431] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input14
[ 26.135183] fuse init (API version 7.23)
[ 325.938870] wls1: AP 34:31:c4:5f:07:d1 changed bandwidth, new config is 2432 MHz, width 1 (2432/0 MHz)
[ 1198.431306] perf interrupt took too long (2511 > 2495), lowering kernel.perf_event_max_sample_rate to 50100
[ 1284.185106] tun: Universal TUN/TAP device driver, 1.6
[ 1284.185111] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
[ 1284.215129] Bridge firewalling registered
[ 1284.229704] device tap0 entered promiscuous mode
[ 1284.241864] IPv6: ADDRCONF(NETDEV_UP): qemubr0: link is not ready
[ 2126.210933] wls1: AP 34:31:c4:5f:07:d1 changed bandwidth, new config is 2432 MHz, width 2 (2422/0 MHz)
[ 2426.034294] wls1: AP 34:31:c4:5f:07:d1 changed bandwidth, new config is 2432 MHz, width 1 (2432/0 MHz)
[ 2892.936374] kvm: zapping shadow pages for mmio generation wraparound
[ 2911.505834] kvm [958]: vcpu0 disabled perfctr wrmsr: 0xc1 data 0xffff
ip link / addr on host:
# ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: wls1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
link/ether 00:21:6a:a9:49:ae brd ff:ff:ff:ff:ff:ff
inet 192.168.178.32/24 brd 192.168.178.255 scope global wls1
valid_lft forever preferred_lft forever
inet6 fe80::2176:234a:73c6:16a7/64 scope link
valid_lft forever preferred_lft forever
3: tap0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop master qemubr0 state DOWN group default qlen 500
link/ether 7a:16:ef:9e:39:78 brd ff:ff:ff:ff:ff:ff
4: qemubr0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN group default
link/ether 7a:16:ef:9e:39:78 brd ff:ff:ff:ff:ff:ff
# ip link
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: wls1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DORMANT group default qlen 1000
link/ether 00:21:6a:a9:49:ae brd ff:ff:ff:ff:ff:ff
3: tap0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop master qemubr0 state DOWN mode DEFAULT group default qlen 500
link/ether 7a:16:ef:9e:39:78 brd ff:ff:ff:ff:ff:ff
4: qemubr0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN mode DEFAULT group default
link/ether 7a:16:ef:9e:39:78 brd ff:ff:ff:ff:ff:ff
VM ip addr / link
http://oi58.tinypic.com/16kt11k.jpg
VM dmesg (extract), probably not helpful
http://oi59.tinypic.com/2i7l2qv.jpg
I must admit that my theoretical and practical knowledge on networking is quite limited, so this might be trivial. I'd be happy about any hints in the right direction. Thanks
-- mod edit: read the Forum Etiquette and only post thumbnails http://wiki.archlinux.org/index.php/For … s_and_Code and please don't post images of text [jwr] --
Last edited by AndyBrandi (2015-01-01 17:48:08)

You are scratching your right ear with the left hand, so to speak.
Let's say on the host, you have a bridge, br0, with an appropriate IP, serving as a gateway (created with your favorite network manager), and you'd like to start a VM whose virtual drive is arch-x86_64, then this is all you need to do:
$ qemu-system-x86_64 -enable-kvm -drive file=arch-x86_64,if=virtio -net nic,model=virtio -net bridge,br=br0
inside the VM you'll have eth0 (or whatever), and on the host -- tap0 plugged into the bridge. This is all courtesy of /usr/lib/qemu/qemu-bridge-helper which is a suid binary.
Last edited by Leonid.I (2015-01-03 23:24:41)

Help - windows host process

hi there,
help please. I'm using windows 7 pro 64 bit. already updated to sp1.
somehow, every time I start the computer, show an error:
[Window Title]
Windows host process (Rundll32)
[Main Instruction]
Windows host process (Rundll32) has stopped working
[Content]
Windows can check online for a solution to the problem.
[V] View problem details [Check online for a solution and close the program] [Close the program]
I'm not sure whether it is same with vista issue, so I decided to make new post here.
kindly help me please.
thanks.

Hi,
To find out detailed information about this error, please look for the related event log and then copy here.
Anyway, to exclude influence of 3rd software and services, I recommend you to following the steps below:
Type msconfig in run
Click on Services tab, put a check in the "Hide all Microsoft services" checkbox.
Click on "Disable All" button.
Click on Startup tab, and then click on "Disable All" button again.
Press OK button and then "Restart" button on the following window.
After reboot, please check if this issue still occurs.
For detailed steps, you can refer to
http://support.microsoft.com/kb/331796
Thanks!
Andy Altmann
TechNet Community Support

TS2972 How do i get files into the library form a Windows host computer

How do I get files into the sharing library with a Windows host Computer? Other than buying another computer!

You use iTunes, though only specific formats are supported.
Which AppleTV modesl do you have? 1, 2 or 3?

Windows host process (Rundll32)

I am getting an Internet Explorer Security error come up when I open explorer. A website wants to open web content using this program on your computer. "Windows host process (Rundll32)." Publisher is Microsoft Windows. can someone let me know what this means and why I cannot get rid of this message. It does not allow me to tick the box "do not show again" and it will only let me click on allow or not allow.

Hi
As far as I know Rundll32.exe is a program created by Microsoft required to run Dynamic Link Library (DLL) files. But also spyware can use this to run virus programs under the same name.
I recommend scanning the system using a Antivirus software. If nothing would be detected then you can tick the box "do not show again

Virtualbox on windows host: how to install guest addtional

Hi all:
do i need to install the vbox kernel modual ?
can anyone point me some howto ?
there are quite a lot of documents on vbox on Linux host
i can't seem to find doc with a windows host
thanks

The host doesn't matter for installing guest additions.
If Linux is the guest os, just follow these instructions:
http://wiki.archlinux.org/index.php/Vir … _Additions

HP SC44Ge Host Bus Adapter

SUCH HELLO.
I HAVE A HP SC44Ge CONNECTED TO Host Bus Adapter PCI EXPRESS SLOT ON A SERVER WITH WINDOWS SERVER 2008 R2, NOT ME THIS HARDWARE DETECTED, AND THE ADMINISTRATION OF DEVICES OR ANY OTHER PLACE WHERE YOU CAN SEE IF THE CARD IS WELL CONNECTED ; IN THIS CARD ON A LED FLASHING.
COULD HELP ME?

Hello @JohnRambo,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand aht you are having issues with your Server and are seeking assistance. I am sorry, but to get your issue more exposure, I would suggest posting it in the commercial forums, since this is a commercial product. You can do this at Servers.
I hope this helps. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

(SOLVED) Virtualbox bridged network, windows host, arch guest

I am trying to get my archlinux guest's network working again. It was working before I bridged the connection and changed the adaptor to the bridged one, but I want a bridged connection for certain reasons, so I want it working. This is the result I get when I use sudo dchcpcd eth0:
dhcpcd: version 5.0.7 starting
dhcpcd: eth0: rebinding lease of 10.0.2.15
dhcpcd: eth0: broadcasting for a lease
dhcpcd: eth0: offered 192.168.0.199 from 192.168.0.1
dhcpcd: eth0: acknowledged 192.168.0.199 from 192.168.0.1
dhcpcd: eth0: checking for 192.168.0.199
dhcpcd: eth0: hardware address 00:le:8c:85:a6:4d claims 192.168.0.199
dhcpcd: eth0: send_raw_packet: Bad file descriptor
dhcpcd: eth0: rebinding lease of 10.0.2.15
dhcocd: timed out
I have no clue why it's not working, but I am sort of new to linux and virtual machines. Still, can anyone help me get the bridged connection working?
EDIT: Nevermind, I fixed it.
Last edited by Shade Vortex (2009-09-08 14:48:50)

All I did was unbridge my windows network. You only select the bridged network from virtualbox, don't manually bridge your network!
If you windows network is not bridged with your vm's host only network in the windows networking page, then I dunno what your problem is.

In my old OS I could press F11 and clear all the open windows from view to see only the desktop. How can I do that now in Mavricks?

In my old OS I could press F11 and clear all the open windows from view to see only the desktop. How can I do that now in Mavricks?

system preference > Keyborad > click the box thast says use all f1,f2,f2 keys as standard functiong Key and then the f11 key should casue all window fo fly to the side and you can see your desktop

Windows host view of VBox host only adapter

Similar Messages

Maybe you are looking for